summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-30arm64: vdso: Add -fasynchronous-unwind-tables to cflagsVincenzo Frascino
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables by default since gcc-8, so now the de facto platform ABI is to allow unwinding from async signal handlers. However on bare metal targets (aarch64-none-elf), and on old gcc, async and sync unwind tables are not enabled by default to avoid runtime memory costs. This means if linux is built with a baremetal toolchain the vdso.so may not have unwind tables which breaks the gcc platform ABI guarantee in userspace. Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o cflags to address the ABI change. Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation") Cc: Will Deacon <will@kernel.org> Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-30block: remove the bd_openers checks in blk_drop_partitionsChristoph Hellwig
When replacing the bd_super check with a bd_openers I followed a logical conclusion, which turns out to be utterly wrong. When a block device has bd_super sets it has a mount file system on it (although not every mounted file system sets bd_super), but that also implies it doesn't even have partitions to start with. So instead of trying to come up with a logical check for all openers, just remove the check entirely. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Fixes: cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again") Reported-by: Michal Koutný <mkoutny@suse.com> Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30net/mlx5e: Fix q counters on uplink representorsRoi Dayan
Need to allocate the q counters before init_rx which needs them when creating the rq. Fixes: 8520fa57a4e9 ("net/mlx5e: Create q counters on uplink representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: Fix command entry leak in Internal Error StateMoshe Shemesh
Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: Fix forced completion access non initialized command entryMoshe Shemesh
mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: DR, On creation set CQ's arm_db member to right valueErez Shitrit
In polling mode, set arm_db member to a value that will avoid CQ event recovery by the HW. Otherwise we might get event without completion function. In addition,empty completion function to was added to protect from unexpected events. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix mutex init orderParav Pandit
In cited patch mutex is initialized after its used. Below call trace is observed. Fix the order to initialize the mutex early enough. Similarly follow mirror sequence during cleanup. kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock) kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938 __mutex_lock+0x7d6/0x8a0 kernel: Call Trace: kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mark_held_locks+0x55/0x70 kernel: ? __slab_free+0x274/0x400 kernel: ? lockdep_hardirqs_on+0x140/0x1d0 kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core] kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core] kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core] kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core] kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core] kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core] kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix printing wrong error valueParav Pandit
When mlx5_modify_header_alloc() fails, instead of printing the error value returned, current error log prints 0. Fix by printing correct error value returned by mlx5_modify_header_alloc(). Fixes: 6724e66b90ee ("net/mlx5: E-Switch, Get reg_c1 value on miss") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix error unwinding flow for steering init failureParav Pandit
Error unwinding is done incorrectly in the cited commit. When steering init fails, there is no need to perform steering cleanup. When vport error exists, error cleanup should be mirror of the setup routine, i.e. to perform steering cleanup before metadata cleanup. This avoids the call trace in accessing uninitialized objects which are skipped during steering_init() due to failure in steering_init(). Call trace: mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header actions 1, max supported 0 E-Switch: Failed to create restore mod header BUG: kernel NULL pointer dereference, address: 00000000000000d0 [ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core] [ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core] [ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core] [ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] [ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320 [ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 [ 677.299217] genl_rcv_msg+0x1eb/0x430 Fixes: 7983a675ba65 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling
2020-04-30fibmap: Warn and return an error in case of block > INT_MAXRitesh Harjani
We better warn the fibmap user and not return a truncated and therefore an incorrect block map address if the bmap() returned block address is greater than INT_MAX (since user supplied integer pointer). It's better to pr_warn() all user of ioctl_fibmap() and return a proper error code rather than silently letting a FS corruption happen if the user tries to fiddle around with the returned block map address. We fix this by returning an error code of -ERANGE and returning 0 as the block mapping address in case if it is > INT_MAX. Now iomap_bmap() could be called from either of these two paths. Either when a user is calling an ioctl_fibmap() interface to get the block mapping address or by some filesystem via use of bmap() internal kernel API. bmap() kernel API is well equipped with handling of u64 addresses. WARN condition in iomap_bmap_actor() was mainly added to warn all the fibmap users. But now that we have directly added this warning for all fibmap users and also made sure to return 0 as block map address in case if addr > INT_MAX. So we can now remove this logic from iomap_bmap_actor(). Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-04-30bpf: Fix error return code in map_lookup_and_delete_elem()Wei Yongjun
Fix to return negative error code -EFAULT from the copy_to_user() error handling case instead of 0, as done elsewhere in this function. Fixes: bd513cd08f10 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200430081851.166996-1-weiyongjun1@huawei.com
2020-04-30dma-buf: fix documentation build warningsRandy Dunlap
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-04-30Merge tag 'phy-for-5.7-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus phy: for 5.7 -rc *) Update MAINTAINER to include Vinod Koul as co-maintainer of PHY *) Fix Kconfig dependencies in seen with PHY_TEGRA_XUSB *) Re-add "qcom,sdm845-qusb2-phy" compatible in phy-qcom-qusb2.c to make it work with existing dtbs *) Move clock enable from ->poweron() to ->init() in Qualcomm usb-hs-28nm driver to initialize HW in ->init() Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.7-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: qualcomm: usb-hs-28nm: Prepare clocks in init MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
2020-04-30ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB IDTakashi Iwai
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-30KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITSMarc Zyngier
KVM now expects to be able to use HW-accelerated delivery of vSGIs as soon as the guest has enabled thm. Unfortunately, we only initialize the GICv4 context if we have a virtual ITS exposed to the guest. Fix it by always initializing the GICv4.1 context if it is available on the host. Fixes: 2291ff2f2a56 ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor") Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-30KVM: arm64: Save/restore sp_el0 as part of __guest_enterMarc Zyngier
We currently save/restore sp_el0 in C code. This is a bit unsafe, as a lot of the C code expects 'current' to be accessible from there (and the opportunity to run kernel code in HYP is specially great with VHE). Instead, let's move the save/restore of sp_el0 to the assembly code (in __guest_enter), making sure that sp_el0 is correct very early on when we exit the guest, and is preserved as long as possible to its host value when we enter the guest. Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-30powerpc/uaccess: Evaluate macro arguments once, before user access is allowedNicholas Piggin
get/put_user() can be called with nontrivial arguments. fs/proc/page.c has a good example: if (put_user(stable_page_flags(ppage), out)) { stable_page_flags() is quite a lot of code, including spin locks in the page allocator. Ensure these arguments are evaluated before user access is allowed. This improves security by reducing code with access to userspace, but it also fixes a PREEMPT bug with KUAP on powerpc/64s: stable_page_flags() is currently called with AMR set to allow writes, it ends up calling spin_unlock(), which can call preempt_schedule. But the task switch code can not be called with AMR set (it relies on interrupts saving the register), so this blows up. It's fine if the code inside allow_user_access() is preemptible, because a timer or IPI will save the AMR, but it's not okay to explicitly cause a reschedule. Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200407041245.600651-1-npiggin@gmail.com
2020-04-30btrfs: fix gcc-4.8 build warning for struct initializerArnd Bergmann
Some older compilers like gcc-4.8 warn about mismatched curly braces in a initializer: fs/btrfs/backref.c: In function 'is_shared_data_backref': fs/btrfs/backref.c:394:9: error: missing braces around initializer [-Werror=missing-braces] struct prelim_ref target = {0}; ^ fs/btrfs/backref.c:394:9: error: (near initialization for 'target.rbnode') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-04-30KVM: arm64: Delete duplicated label in invalid_vectorFangrui Song
SYM_CODE_START defines \label , so it is redundant to define \label again. A redefinition at the same place is accepted by GNU as (https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=159fbb6088f17a341bcaaac960623cab881b4981) but rejected by the clang integrated assembler. Fixes: 617a2f392c92 ("arm64: kvm: Annotate assembly using modern annoations") Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/988 Link: https://lore.kernel.org/r/20200413231016.250737-1-maskray@google.com
2020-04-30ovl: clear ATTR_OPEN from attr->ia_validVivek Goyal
As of now during open(), we don't pass bunch of flags to underlying filesystem. O_TRUNC is one of these. Normally this is not a problem as VFS calls ->setattr() with zero size and underlying filesystem sets file size to 0. But when overlayfs is running on top of virtiofs, it has an optimization where it does not send setattr request to server if dectects that truncation is part of open(O_TRUNC). It assumes that server already zeroed file size as part of open(O_TRUNC). fuse_do_setattr() { if (attr->ia_valid & ATTR_OPEN) { /* * No need to send request to userspace, since actual * truncation has already been done by OPEN. But still * need to truncate page cache. */ } } IOW, fuse expects O_TRUNC to be passed to it as part of open flags. But currently overlayfs does not pass O_TRUNC to underlying filesystem hence fuse/virtiofs breaks. Setup overlayfs on top of virtiofs and following does not zero the file size of a file is either upper only or has already been copied up. fd = open(foo.txt, O_TRUNC | O_WRONLY); There are two ways to fix this. Either pass O_TRUNC to underlying filesystem or clear ATTR_OPEN from attr->ia_valid so that fuse ends up sending a SETATTR request to server. Miklos is concerned that O_TRUNC might have side affects so it is better to clear ATTR_OPEN for now. Hence this patch clears ATTR_OPEN from attr->ia_valid. I found this problem while running unionmount-testsuite. With this patch, unionmount-testsuite passes with overlayfs on top of virtiofs. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Fixes: bccece1ead36 ("ovl: allow remote upper") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-04-30ovl: clear ATTR_FILE from attr->ia_validVivek Goyal
ovl_setattr() can be passed an attr which has ATTR_FILE set and attr->ia_file is a file pointer to overlay file. This is done in open(O_TRUNC) path. We should either replace with attr->ia_file with underlying file object or clear ATTR_FILE so that underlying filesystem does not end up using overlayfs file object pointer. There are no good use cases yet so for now clear ATTR_FILE. fuse seems to be one user which can use this. But it can work even without this. So it is not mandatory to pass ATTR_FILE to fuse. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Fixes: bccece1ead36 ("ovl: allow remote upper") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-04-30USB: uas: add quirk for LaCie 2Big QuadraOliver Neukum
This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-30phy: qualcomm: usb-hs-28nm: Prepare clocks in initBjorn Andersson
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write the initialization sequence to the hardware, so move the clock enablement to phy init and exit. Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-30MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainerKishon Vijay Abraham I
Add Vinod Koul as Generic PHY Subsystem co-maintainer and move the linux-phy to a shared repository. Cc: Vinod Koul <vkoul@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-30ALSA: opti9xx: shut up gcc-10 range warningArnd Bergmann
gcc-10 points out a few instances of suspicious integer arithmetic leading to value truncation: sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure': sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask' 351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c: In function 'snd_miro_configure': sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask' 1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~ These are all harmless here as only the low 8 bit are passed down anyway. Change the macros to inline functions to make the code more readable and also avoid the warning. Strictly speaking those functions also need locking to make the read/write pair atomic, but it seems unlikely that anyone would still run into that issue. Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-30crypto: arch/nhpoly1305 - process in explicit 4k chunksJason A. Donenfeld
Rather than chunking via PAGE_SIZE, this commit changes the arch implementations to chunk in explicit 4k parts, so that calculations on maximum acceptable latency don't suddenly become invalid on platforms where PAGE_SIZE isn't 4k, such as arm64. Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305") Fixes: 012c82388c03 ("crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305") Fixes: a00fa0c88774 ("crypto: arm64/nhpoly1305 - add NEON-accelerated NHPoly1305") Fixes: 16aae3595a9d ("crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-30crypto: arch/lib - limit simd usage to 4k chunksJason A. Donenfeld
The initial Zinc patchset, after some mailing list discussion, contained code to ensure that kernel_fpu_enable would not be kept on for more than a 4k chunk, since it disables preemption. The choice of 4k isn't totally scientific, but it's not a bad guess either, and it's what's used in both the x86 poly1305, blake2s, and nhpoly1305 code already (in the form of PAGE_SIZE, which this commit corrects to be explicitly 4k for the former two). Ard did some back of the envelope calculations and found that at 5 cycles/byte (overestimate) on a 1ghz processor (pretty slow), 4k means we have a maximum preemption disabling of 20us, which Sebastian confirmed was probably a good limit. Unfortunately the chunking appears to have been left out of the final patchset that added the glue code. So, this commit adds it back in. Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function") Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Fixes: a44a3430d71b ("crypto: arm/chacha - expose ARM ChaCha routine as library function") Fixes: d7d7b8535662 ("crypto: x86/poly1305 - wire up faster implementations for kernel") Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation") Cc: Eric Biggers <ebiggers@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-29Merge branch 'wireguard-fixes'David S. Miller
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc4 This series contains two fixes and a cleanup for wireguard: 1) Removal of a spurious newline, from Sultan Alsawaf. 2) Fix for a memory leak in an error path, in which memory allocated prior to the error wasn't freed, reported by Sultan Alsawaf. 3) Fix to ECN support to use RFC6040 properly like all the other tunnel drivers, from Toke Høiland-Jørgensen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: receive: use tunnel helpers for decapsulating ECN markingsToke Høiland-Jørgensen
WireGuard currently only propagates ECN markings on tunnel decap according to the old RFC3168 specification. However, the spec has since been updated in RFC6040 to recommend slightly different decapsulation semantics. This was implemented in the kernel as a set of common helpers for ECN decapsulation, so let's just switch over WireGuard to using those, so it can benefit from this enhancement and any future tweaks. We do not drop packets with invalid ECN marking combinations, because WireGuard is frequently used to work around broken ISPs, which could be doing that. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Rodney W. Grimes <ietf@gndrsh.dnsmgr.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: queueing: cleanup ptr_ring in error path of packet_queue_initJason A. Donenfeld
Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc failed, the previously allocated ptr_ring wouldn't be freed. This commit adds the missing call to ptr_ring_cleanup in the error case. Reported-by: Sultan Alsawaf <sultan@kerneltoast.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: send: remove errant newline from packet_encrypt_workerSultan Alsawaf
This commit removes a useless newline at the end of a scope, which doesn't add anything in the way of organization or readability. Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before ↵Gwendal Grignou
claiming sensors Allocate callbacks array before enumerating the sensors: The probe routine for these sensors (for instance cros_ec_sensors_probe) can be called within the sensorhub probe routine (cros_ec_sensors_probe()) Fixes: 145d59baff594 ("platform/chrome: cros_ec_sensorhub: Add FIFO support") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-04-29HID: mcp2221: add gpiolib dependencyArnd Bergmann
Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: wacom: Report 2nd-gen Intuos Pro S center button status over BTJason Gerecke
The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29mptcp: replace mptcp_disconnect with a stubFlorian Westphal
Paolo points out that mptcp_disconnect is bogus: "lock_sock(sk); looks suspicious (lock should be already held by the caller) And call to: tcp_disconnect(sk, flags); too, sk is not a tcp socket". ->disconnect() gets called from e.g. inet_stream_connect when one tries to disassociate a connected socket again (to re-connect without closing the socket first). MPTCP however uses mptcp_stream_connect, not inet_stream_connect, for the mptcp-socket connect call. inet_stream_connect only gets called indirectly, for the tcp socket, so any ->disconnect() calls end up calling tcp_disconnect for that tcp subflow sk. This also explains why syzkaller has not yet reported a problem here. So for now replace this with a stub that doesn't do anything. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29um: Fix typo in vector driver transport option definitionIgnat Korchagin
No big problem as "raw" and "gre" have the same length, but could go wrong if they don't in the future. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-04-29um: syscall.c: include <asm/unistd.h>Johannes Berg
Without CONFIG_SECCOMP, we don't get this include recursively through the existing includes, thus failing the build on not having __NR_syscall_max defined. Add the necessary include to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-04-29um: Fix xor.h includeJohannes Berg
Two independent changes here ended up going into the tree one after another, without a necessary rename, fix that. Reported-by: Thomas Meyer <thomas@m3y3r.de> Fixes: f185063bff91 ("um: Move timer-internal.h to non-shared") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-04-29netfilter: nf_osf: avoid passing pointer to local varArnd Bergmann
gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c29210e2 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-29net: dsa: mv88e6xxx: remove duplicate assignment of struct membersJason Yan
These struct members named 'phylink_validate' was assigned twice: static const struct mv88e6xxx_ops mv88e6190_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6190x_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390x_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6191_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6290_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; Remove all the first one and leave the second one which are been used in fact. Be aware that for 'mv88e6190x_ops' the assignment functions is different while the others are all the same. This fixes the following coccicheck warning: drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first occurrence line 3965, second occurrence line 3967 drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first occurrence line 4024, second occurrence line 4026 drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first occurrence line 4082, second occurrence line 4085 drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first occurrence line 4238, second occurrence line 4242 Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members") Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29arm64: dts: meson-g12: remove spurious blank lineNeil Armstrong
Remove spurious blank line introduced in f12a463d2f43 but was not part of the original patch at [1]. [1] http://lore.kernel.org/r/20200313090713.15147-3-narmstrong@baylibre.com Fixes: f12a463d2f43 ("arm64: dts: meson-g12: add the SPIFC nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200420080018.11607-1-narmstrong@baylibre.com
2020-04-29ARC: guard dsp early init against non ARCv2Eugeniy Paltsev
As of today we guard early DSP init code with ARC_AUX_DSP_BUILD (0x7A) BCR check to verify that we have CPU with DSP configured. However that's not enough as in ARCv1 CPU the same BCR (0x7A) is used for checking MUL/MAC instructions presence. So, let's guard DSP early init against non ARCv2. Fixes: 4827d0cf744e ("ARC: handle DSP presence in HW") Reported-by: Angelo Ribeiro <angelor@synopsys.com> Suggested-by: Jose Abreu <oabreu@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-04-29arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status propertyNeil Armstrong
In the process of moving the VIM3 audio nodes to a G12B specific dtsi for enabling the SM1 based VIM3L, the frddr_a status = "okay" property got dropped. This re-enables the frddr_a node to fix audio support. Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com
2020-04-29arm64: dts: meson-g12-common: fix dwc2 clock namesNeil Armstrong
Use the correct dwc2 clock name. Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200326160857.11929-3-narmstrong@baylibre.com
2020-04-29arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supplyNeil Armstrong
The USB supply used the wrong property, fixing: meson-g12b-ugoos-am6.dt.yaml: usb@ffe09000: 'vbus-regulator' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200326160857.11929-2-narmstrong@baylibre.com
2020-04-29regulator: Revert "Use driver_deferred_probe_timeout for ↵John Stultz
regulator_init_complete_work" This reverts commit dca0b44957e5 ("regulator: Use driver_deferred_probe_timeout for regulator_init_complete_work"), as we ended up reverting the default deferred_probe_timeout value back to zero, to preserve behavior with 5.6 we need to decouple the regulator timeout which was previously 30 seconds. This avoids breaking some systems that depend on the regulator timeout but don't require the deferred probe timeout. Cc: linux-pm@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200429172349.55979-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 23:45:24 +0000