| Age | Commit message (Collapse) | Author |
|---|
|
Don't access any members of a URB after giving it back.
URB might be freed by then already.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains that we check cap the upper bound of "index" but don't
check for negatives. It's a false positive because "index" is never
negative. But it's also simple enough to make it unsigned which makes
the code easier to audit.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.12-rc2.
Includes:
- A fix for a build failure introduced in -rc1 when tracepoints are
enabled on 32-bit ARM.
- Disabling use of stack pointer protection in the hyp code which can
cause panics.
- A handful of VGIC fixes.
- A fix to the init of the redistributors on GICv3 systems that
prevented boot with kvmtool on GICv3 systems introduced in -rc1.
- A number of race conditions fixed in our MMU handling code.
- A fix for the guest being able to program the debug extensions for
the host on the 32-bit side.
|
|
We see the following build failure with CONFIG_BT_HCIUART_NOKIA=y and
CONFIG_BT_HCIUART_H4=n:
drivers/bluetooth/hci_nokia.c: In function 'nokia_recv':
drivers/bluetooth/hci_nokia.c:644:18: error: implicit declaration of function 'h4_recv_buf' [-Werror=implicit-function-declaration]
...
Fix this by selecting the BT_HCIUART_H4 symbol like all the other users
of the protocoll.
Fixes: 7bb318680e86 ("Bluetooth: add nokia driver")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When HCI_UART_PROTO_READY is in the set state, the Data Link protocol
layer (proto) is bound to the HCI UART driver. This state allows the
registered proto function pointers to be used by the HCI UART driver.
When unbinding (closing) the Data Link protocol layer, the proto
function pointers much be prevented from being used immediately before
running the proto close function pointer. Otherwise, there is a risk
that a proto non-close function pointer is used during or after the
proto close function pointer is used. The consequences are likely to
be a kernel crash because the proto close function pointer will free
resources used in the Data Link protocol layer.
Therefore, add a reader writer lock (rwlock) solution to prevent the
close proto function pointer from running by using write_lock_irqsave()
whilst the other proto function pointers are protected using
read_lock(). This means HCI_UART_PROTO_READY can safely be cleared
in the knowledge that no proto function pointers are running.
When flag HCI_UART_PROTO_READY is put into the clear state,
proto close function pointer can safely be run. Note
flag HCI_UART_PROTO_SET being in the set state prevents the proto
open function pointer from being run so there is no race condition
between proto open and close function pointers.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When the HCI User Channel access is requested, then do not try to
undermine it with vendor diagnostic configuration. The exclusive user
is required to configure its own vendor diagnostic in that case and
can not rely on the host stack support.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
We see the following link error with CONFIG_BT_HCIUART=y,
CONFIG_BT_HCIUART_LL=y and CONFIG_SERIAL_DEV_BUS=m:
drivers/built-in.o: In function 'll_close':
supp.c:(.text+0x55add4): undefined reference to 'serdev_device_close'
supp.c:(.text+0x55add4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_close'
drivers/built-in.o: In function 'll_open':
supp.c:(.text+0x55aed0): undefined reference to 'serdev_device_open'
supp.c:(.text+0x55aed0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_open'
drivers/built-in.o: In function `hci_ti_probe':
supp.c:(.text+0x55b00c): undefined reference to 'hci_uart_register_device'
supp.c:(.text+0x55b00c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'hci_uart_register_device'
drivers/built-in.o: In function `ll_setup':
supp.c:(.text+0x55b08c): undefined reference to 'serdev_device_set_flow_control'
supp.c:(.text+0x55b08c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_set_flow_control'
supp.c:(.text+0x55b324): undefined reference to 'serdev_device_set_baudrate'
supp.c:(.text+0x55b324): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_set_baudrate'
drivers/built-in.o: In function 'll_init':
supp.c:(.init.text+0x1b508): undefined reference to '__serdev_device_driver_register'
supp.c:(.init.text+0x1b508): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol '__serdev_device_driver_register'
Fix this by dependig BT_HCIUART_LL on the BT_HCIUART_SERDEV symbol.
This implies a dependency on BT_HCIUART and hci_ll.c is only compiled in
if SERIAl_DEV_BUS is built in or SERIAL_DEV_BUS and BT_HCIUART are
modules.
Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
If the LE Set Default PHY command is supported, the indicate to the
controller that the host has no preferences for transmitter PHY or
receiver PHY selection.
Issuing this command gives the controller a clear indication that other
PHY can be selected if available.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
If either LE Set Default PHY command or LE Set PHY commands is
supported, then enable the LE PHY Update Complete event.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
If the Channel Selection Algorithm #2 feature is supported, then enable
the new LE Channel Selection Algorithm event.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When LE Data Packet Length Extension is supported, then actually
increase the suggested default data length to the maximum to enable
higher througput.
< HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0
> HCI Event: Command Complete (0x0e) plen 12
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 251
Max TX time: 2120
Max RX octets: 251
Max RX time: 2120
< HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 8
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4
TX octets: 251
TX time: 2120
> HCI Event: Command Complete (0x0e) plen 4
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
This patch adds support for Intel Bluetooth device 9460/9560 also known
as Jefferson Peak (JfP). The firmware downloading mechanism is same as
previous generation. So include the new USB product identifier and
whitelist the hardware variant.
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0aaa Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Bootloader version:
< HCI Command: Intel Read Version (0x3f|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 13
Intel Read Version (0x3f|0x0005) ncmd 32
Status: Success (0x00)
Hardware platform: 0x37
Hardware variant: 0x11
Hardware revision: 0.0
Firmware variant: 0x06
Firmware revision: 0.1
Firmware build: 42-52.2015
Firmware patch: 0
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The patch in the Fixes references COMPAT_XT_ALIGN in the definition
of XT_DATA_TO_USER, outside an #ifdef CONFIG_COMPAT block.
Split XT_DATA_TO_USER into separate compat and non compat variants and
define the first inside an CONFIG_COMPAT block.
This simplifies both variants by removing branches inside the macro.
Fixes: 324318f0248c ("netfilter: xtables: zero padding in data_to_user")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We were not holding the kvm->slots_lock as required when calling
kvm_io_bus_unregister_dev() as required.
This only affects the error path, but still, let's do our due
diligence.
Reported by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
|
|
If userspace creates the VCPUs after initializing the VGIC, then we end
up in a situation where we trigger a bug in kvm_vcpu_get_idx(), because
it is called prior to adding the VCPU into the vcpus array on the VM.
There is no tight coupling between the VCPU index and the area of the
redistributor region used for the VCPU, so we can simply ensure that all
creations of redistributors are serialized per VM, and increment an
offset when we successfully add a redistributor.
The vgic_register_redist_iodev() function can be called from two paths:
vgic_redister_all_redist_iodev() which is called via the kvm_vgic_addr()
device attribute handler. This patch already holds the kvm->lock mutex.
The other path is via kvm_vgic_vcpu_init, which is called through a
longer chain from kvm_vm_ioctl_create_vcpu(), which releases the
kvm->lock mutex just before calling kvm_arch_vcpu_create(), so we can
simply take this mutex again later for our purposes.
Fixes: ab6f468c10 ("KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs")
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
|
|
This adds Power Management deep Suspend/Resume support for Bosch M_CAN
chip.
When entering deep sleep, the clocks are gated, the interrupts are
disabled. When resuming from deep sleep, the chip needs to be
reinitialized, the clocks ungated and the interrupts enabled.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This creates a function to ungate M_CAN clocks and another to gate the
same clocks, then swaps all gating/ungating code with their respective
function.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This moves clocks gating outside of the m_can_stop function as the
m_can_start function does not (and cannot, at least in current
implementation) ungate clocks. This way, both functions can now be used
symmetrically.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
To avoid possible ECC/parity checksum errors when reading an
uninitialized buffer, the entire Message RAM is initialized when probing
the driver. This initialization is done in the same function reading the
Device Tree properties.
This patch moves the RAM initialization to a separate function so it can
be called separately from device initialization from Device Tree.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The API setkey checks for key sizes and alignment went AWOL during the
skcipher conversion. This patch restores them.
Cc: <stable@vger.kernel.org>
Fixes: 4e6c3df4d729 ("crypto: skcipher - Add low-level skcipher...")
Reported-by: Baozeng <sploving1@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Current limits with regards to processing program paths do not
really reflect today's needs anymore due to programs becoming
more complex and verifier smarter, keeping track of more data
such as const ALU operations, alignment tracking, spilling of
PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for
smarter matching of what LLVM generates.
This also comes with the side-effect that we result in fewer
opportunities to prune search states and thus often need to do
more work to prove safety than in the past due to different
register states and stack layout where we mismatch. Generally,
it's quite hard to determine what caused a sudden increase in
complexity, it could be caused by something as trivial as a
single branch somewhere at the beginning of the program where
LLVM assigned a stack slot that is marked differently throughout
other branches and thus causing a mismatch, where verifier
then needs to prove safety for the whole rest of the program.
Subsequently, programs with even less than half the insn size
limit can get rejected. We noticed that while some programs
load fine under pre 4.11, they get rejected due to hitting
limits on more recent kernels. We saw that in the vast majority
of cases (90+%) pruning failed due to register mismatches. In
case of stack mismatches, majority of cases failed due to
different stack slot types (invalid, spill, misc) rather than
differences in spilled registers.
This patch makes pruning more aggressive by also adding markers
that sit at conditional jumps as well. Currently, we only mark
jump targets for pruning. For example in direct packet access,
these are usually error paths where we bail out. We found that
adding these markers, it can reduce number of processed insns
by up to 30%. Another option is to ignore reg->id in probing
PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning
slightly as well by up to 7% observed complexity reduction as
stand-alone. Meaning, if a previous path with register type
PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then
in the current state a PTR_TO_MAP_VALUE_OR_NULL register for
the same map X must be safe as well. Last but not least the
patch also adds a scheduling point and bumps the current limit
for instructions to be processed to a more adequate value.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not use unsigned variables to see if it returns a negative
error or not.
Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas discovered a bug where the kprobe trace tests had a race
condition where the kprobe_optimizer called from a delayed work queue
that does the optimizing and "unoptimizing" of a kprobe, can try to
modify the text after it has been freed by the init code.
The kprobe trace selftest is a special case, and Thomas and myself
investigated to see if there's a chance that this could also be a bug
with module unloading, as the code is not obvious to how it handles
this. After adding lots of printks, I figured it out. Thomas suggested
that this should be commented so that others will not have to go
through this exercise again.
Link: http://lkml.kernel.org/r/20170516145835.3827d3aa@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add a test to ensure we clean up properly when removing an instance
with active event triggers.
Link: http://lkml.kernel.org/r/c479465b2009397708d6c52c8561e1523c22cd31.1494956770.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix a few bashisms in ftrace selftests.
Link: http://lkml.kernel.org/r/5fbf4613eef0766918fa04e3ff537cae271223ee.1494956770.git.naveen.n.rao@linux.vnet.ibm.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
No need to add ugly #ifdefs in the code. Having a standard stub file is much
prettier.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If instance directories are deleted while there are registered function
triggers:
# cd /sys/kernel/debug/tracing/instances
# mkdir test
# echo "schedule:enable_event:sched:sched_switch" > test/set_ftrace_filter
# rmdir test
Unable to handle kernel paging request for data at address 0x00000008
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xc0000000021edde8
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048
NUMA
pSeries
Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc kvm iptable_filter fuse binfmt_misc pseries_rng rng_core vmx_crypto ib_iser rdma_cm iw_cm ib_cm ib_core libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath virtio_net virtio_blk virtio_pci crc32c_vpmsum virtio_ring virtio
CPU: 8 PID: 8694 Comm: rmdir Not tainted 4.11.0-nnr+ #113
task: c0000000bab52800 task.stack: c0000000baba0000
NIP: c0000000021edde8 LR: c0000000021f0590 CTR: c000000002119620
REGS: c0000000baba3870 TRAP: 0300 Not tainted (4.11.0-nnr+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>
CR: 22002422 XER: 20000000
CFAR: 00007fffabb725a8 DAR: 0000000000000008 DSISR: 40000000 SOFTE: 0
GPR00: c00000000220f750 c0000000baba3af0 c000000003157e00 0000000000000000
GPR04: 0000000000000040 00000000000000eb 0000000000000040 0000000000000000
GPR08: 0000000000000000 0000000000000113 0000000000000000 c00000000305db98
GPR12: c000000002119620 c00000000fd42c00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 c0000000bab52e90 0000000000000000
GPR24: 0000000000000000 00000000000000eb 0000000000000040 c0000000baba3bb0
GPR28: c00000009cb06eb0 c0000000bab52800 c00000009cb06eb0 c0000000baba3bb0
NIP [c0000000021edde8] ring_buffer_lock_reserve+0x8/0x4e0
LR [c0000000021f0590] trace_event_buffer_lock_reserve+0xe0/0x1a0
Call Trace:
[c0000000baba3af0] [c0000000021f96c8] trace_event_buffer_commit+0x1b8/0x280 (unreliable)
[c0000000baba3b60] [c00000000220f750] trace_event_buffer_reserve+0x80/0xd0
[c0000000baba3b90] [c0000000021196b8] trace_event_raw_event_sched_switch+0x98/0x180
[c0000000baba3c10] [c0000000029d9980] __schedule+0x6e0/0xab0
[c0000000baba3ce0] [c000000002122230] do_task_dead+0x70/0xc0
[c0000000baba3d10] [c0000000020ea9c8] do_exit+0x828/0xd00
[c0000000baba3dd0] [c0000000020eaf70] do_group_exit+0x60/0x100
[c0000000baba3e10] [c0000000020eb034] SyS_exit_group+0x24/0x30
[c0000000baba3e30] [c00000000200bcec] system_call+0x38/0x54
Instruction dump:
60000000 60420000 7d244b78 7f63db78 4bffaa09 393efff8 793e0020 39200000
4bfffecc 60420000 3c4c00f7 3842a020 <81230008> 2f890000 409e02f0 a14d0008
---[ end trace b917b8985d0e650b ]---
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xc0000000021edde8
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xc0000000021edde8
Faulting instruction address: 0xc0000000021edde8
To address this, let's clear all registered function probes before
deleting the ftrace instance.
Link: http://lkml.kernel.org/r/c5f1ca624043690bd94642bb6bffd3f2fc504035.1494956770.git.naveen.n.rao@linux.vnet.ibm.com
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Handle a NULL glob properly and simplify the check.
Link: http://lkml.kernel.org/r/5df74d4ffb4721db6d5a22fa08ca031d62ead493.1494956770.git.naveen.n.rao@linux.vnet.ibm.com
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.
The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.
Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.
Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
I hit the following lockdep splat when booting with ftrace selftests
enabled, as well as CONFIG_PREEMPT and LOCKDEP.
Testing dynamic ftrace ops #1:
(1 0 1 0 0)
(1 1 2 0 0)
(2 1 3 0 169)
(2 2 4 0 50066)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:202 check_init_srcu_struct+0x60/0x70
Modules linked in:
CPU: 0 PID: 13 Comm: rcu_tasks_kthre Not tainted 4.12.0-rc1-test+ #587
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
task: ffff880119628040 task.stack: ffffc900006a4000
RIP: 0010:check_init_srcu_struct+0x60/0x70
RSP: 0000:ffffc900006a7d98 EFLAGS: 00010246
RAX: 0000000000000246 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff880119628040 RSI: 00000000ffffffff RDI: ffffffff81e5fb40
RBP: ffffc900006a7e20 R08: 00000023b403c000 R09: 0000000000000001
R10: ffffc900006a7e40 R11: 0000000000000000 R12: ffffffff81e5fb40
R13: 0000000000000286 R14: ffff880119628040 R15: ffffc900006a7e98
FS: 0000000000000000(0000) GS:ffff88011ea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88011edff000 CR3: 0000000001e0f000 CR4: 00000000001406f0
Call Trace:
? __synchronize_srcu+0x6e/0x140
? lock_acquire+0xdc/0x1d0
? ktime_get_mono_fast_ns+0x5d/0xb0
synchronize_srcu+0x6f/0x110
? synchronize_srcu+0x6f/0x110
rcu_tasks_kthread+0x20a/0x540
kthread+0x114/0x150
? __rcu_read_unlock+0x70/0x70
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
Code: f6 83 70 06 00 00 03 49 89 c5 74 0d be 01 00 00 00 48 89 df e8 42 fa ff ff 4c 89 ee 4c 89 e7 e8 b7 42 75 00 5b 41 5c 41 5d 5d c3 <0f> ff eb aa 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
---[ end trace 5c3f4206ce50f6ac ]---
What happens is that the selftests include a creating of a dynamically
allocated ftrace_ops, which requires the use of synchronize_rcu_tasks()
which uses srcu, and triggers the above warning.
It appears that synchronize_rcu_tasks() is not set up at early_initcall(),
but it is at core_initcall(). By moving the tests down to that location
works out properly.
Link: http://lkml.kernel.org/r/20170517111435.7388c033@gandalf.local.home
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
fix build issue if NVME_FC_TARGET is not defined. noop the code. The
code will never be invoked if target mode is not enabled.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Recent commit on patchset "lpfc updates for 11.2.0.14" fixed an issue
about dereferencing a NULL pointer on port reset. The specific commit,
named "lpfc: Fix system crash when port is reset.", is missing a check
against NULL pointer on lpfc_els_flush_cmd() though.
Since we destroy the queues on adapter resets, like in PCI error
recovery path, we need the validation present on this patch in order to
avoid a NULL pointer dereference when trying to flush commands of ELS
wq, after it has been destroyed (which would lead to a kernel oops).
Tested-by: Raphael Silva <raphasil@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 0a5539f66133 ("bpf: Provide a linux/types.h override
for bpf selftests.") caused a build failure for tools/testing/selftest/bpf
because of some missing types:
$ make -C tools/testing/selftests/bpf/
...
In file included from /home/yhs/work/net-next/tools/testing/selftests/bpf/test_pkt_access.c:8:
../../../include/uapi/linux/bpf.h:170:3: error: unknown type name '__aligned_u64'
__aligned_u64 key;
...
/usr/include/linux/swab.h:160:8: error: unknown type name '__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
...
The type __aligned_u64 is defined in linux:include/uapi/linux/types.h.
The fix is to copy missing type definition into
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Adding additional include "string.h" resolves __always_inline issue.
Fixes: 0a5539f66133 ("bpf: Provide a linux/types.h override for bpf selftests.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a couple DM thin provisioning fixes
- a few request-based DM and DM multipath fixes for issues that were
made when merging Christoph's changes with Bart's changes for 4.12
- a DM bufio unsigned overflow fix
- a couple pure fixes for the DM cache target.
- various very small tweaks to the DM cache target that enable
considerable speed improvements in the face of continuous IO. Given
that the cache target was significantly reworked for 4.12 I see no
reason to sit on these advances until 4.13 considering the favorable
results associated with such minimalist tweaks.
* tag 'for-4.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: handle kmalloc failure allocating background_tracker struct
dm bufio: make the parameter "retain_bytes" unsigned long
dm mpath: multipath_clone_and_map must not return -EIO
dm mpath: don't return -EIO from dm_report_EIO
dm rq: add a missing break to map_request
dm space map disk: fix some book keeping in the disk space map
dm thin metadata: call precommit before saving the roots
dm cache policy smq: don't do any writebacks unless IDLE
dm cache: simplify the IDLE vs BUSY state calculation
dm cache: track all IO to the cache rather than just the origin device's IO
dm cache policy smq: stop preemptively demoting blocks
dm cache policy smq: put newly promoted entries at the top of the multiqueue
dm cache policy smq: be more aggressive about triggering a writeback
dm cache policy smq: only demote entries in bottom half of the clean multiqueue
dm cache: fix incorrect 'idle_time' reset in IO tracker
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here are some bugfixes from I2C, especially removing a wrongly
displayed error message for all i2c muxes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xgene: Set ACPI_COMPANION_I2C
i2c: mv64xxx: don't override deferred probing when getting irq
i2c: mux: only print failure message on error
i2c: mux: reg: rename label to indicate what it does
i2c: mux: reg: put away the parent i2c adapter on probe failure
|
|
Andrew Lunn says:
====================
net: phy: marvell: Checkpatch cleanup
I will be contributing a few new features to the Marvell PHY driver
soon. Start by making the code mostly checkpatch clean. There should
not be any functional changes. Just comments set into the correct
format, missing blank lines, turn some comparisons around, and
refactoring to reduce indentation depth.
There is still one camel in the code, but it actually makes sense, so
leave it in piece.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fold lines longer than 80 characters
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Makes the code a bit more readable, and solves quite a few checkpatch
warnings of lines longer than 80 characters.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Break big functions up by using a number of smaller helper
function. Solves some of the over 80 lines warnings, by reducing the
indentation level.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid multiple assignments
Comparisons should place the constant on the right side of the test
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the extra blank lines, add one in where recommended.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use net style comment blocks, and wrap one block with long lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: TCP TS option use 1 ms clock
TCP Timestamps option is defined in RFC 7323
Traditionally on linux, it has been tied to the internal
'jiffy' variable, because it had been a cheap and good enough
generator.
Unfortunately some distros use HZ=250 or even HZ=100 leading
to not very useful TCP timestamps.
For TCP flows in the DC, Google has used usec resolution for more
than two years with great success [1].
RCVBUF autotuning is more precise.
This series converts tp->tcp_mstamp to a plain u64 value storing
a 1 usec TCP clock.
This choice will allow us to upstream the 1 usec TS option as
discussed in IETF 97.
Kathleen Nichols [2] and others advocate for 1ms TS clocks for
network analysis. (1ms being the lowest value supported by RFC 7323.)
[1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
[2] http://netseminar.stanford.edu/seminars/02_02_17.pdf
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP Timestamps option is defined in RFC 7323
Traditionally on linux, it has been tied to the internal
'jiffies' variable, because it had been a cheap and good enough
generator.
For TCP flows on the Internet, 1 ms resolution would be much better
than 4ms or 10ms (HZ=250 or HZ=100 respectively)
For TCP flows in the DC, Google has used usec resolution for more
than two years with great success [1]
Receive size autotuning (DRS) is indeed more precise and converges
faster to optimal window size.
This patch converts tp->tcp_mstamp to a plain u64 value storing
a 1 usec TCP clock.
This choice will allow us to upstream the 1 usec TS option as
discussed in IETF 97.
[1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After this patch, all uses of tcp_time_stamp will require
a change when we introduce 1 ms and/or 1 us TCP TS option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_time_stamp will become slightly more expensive soon,
cache its value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This CC does not need 1 ms tcp_time_stamp and can use
the jiffy based 'timestamp'.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This place wants to use tcp_jiffies32, this is good enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_time_stamp will no longer be tied to jiffies.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
