| Age | Commit message (Collapse) | Author |
|---|
|
We have 100+ syzbot reports about netns being dismantled too soon,
still unresolved as of today.
We think a missing get_net() or an extra put_net() is the root cause.
In order to find the bug(s), and be able to spot future ones,
this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers
to precisely pair all put_net() with corresponding get_net().
To use these helpers, each data structure owning a refcount
should also use a "netns_tracker" to pair the get and put.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an x86 selftest to verify that KVM doesn't WARN or otherwise explode
if userspace modifies RCX during a userspace exit to handle string I/O.
This is a regression test for a user-triggerable WARN introduced by
commit 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211025201311.1881846-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace a WARN with a comment to call out that userspace can modify RCX
during an exit to userspace to handle string I/O. KVM doesn't actually
support changing the rep count during an exit, i.e. the scenario can be
ignored, but the WARN needs to go as it's trivial to trigger from
userspace.
Cc: stable@vger.kernel.org
Fixes: 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211025201311.1881846-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In the SDM:
If the logical processor is in 64-bit mode or if CR4.PCIDE = 1, an
attempt to clear CR0.PG causes a general-protection exception (#GP).
Software should transition to compatibility mode and clear CR4.PCIDE
before attempting to disable paging.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211207095230.53437-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make xhci_disable_slot() synchronous, thus ensuring it, and
xhci_free_dev() calling it return after xHC controller completes
the disable slot command.
Otherwise the roothub and xHC host may runtime suspend, and clear the
command ring while the disable slot command is being processed.
This causes a command completion mismatch as the completion event can't
be mapped to the correct command.
Command ring gets out of sync and commands time out.
Driver finally assumes host is unresponsive and bails out.
usb 2-4: USB disconnect, device number 10
xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event
...
xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:0d.0: HC died; cleaning up
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume
routine also resets the controller.
This is bad for USB drivers without reset_resume callback, because
there's no subsequent call of usb_dev_complete() ->
usb_resume_complete() to force rebinding the driver to the device. For
instance, btusb device stops working after xHCI controller is runtime
resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME.
So always take XHCI_RESET_ON_RESUME into account to solve the issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that open-coded stack unwinds have been converted to
arch_stack_walk(), we no longer need to expose any of unwind_frame(),
walk_stackframe(), or start_backtrace() outside of stacktrace.c.
Make those functions private to stacktrace.c, removing their prototypes
from <asm/stacktrace.h> and marking them static.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic.
Currently, dump_backtrace() walks the stack of the current task or a
blocked task by calling stact_backtrace() and iterating unwind steps
using unwind_frame(). This can be written more simply in terms of
arch_stack_walk(), considering three distinct cases:
1) When unwinding a blocked task, start_backtrace() is called with the
blocked task's saved PC and FP, and the unwind proceeds immediately
from this point without skipping any entries. This is functionally
equivalent to calling arch_stack_walk() with the blocked task, which
will start with the task's saved PC and FP.
There is no functional change to this case.
2) When unwinding the current task without regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind proceeds immediately without
skipping. This is *almost* functionally equivalent to calling
arch_stack_walk() for the current task, which will start with its
caller (i.e. an offset into dump_backtrace()) as the PC, and the
callers frame record as the next frame.
The only difference being that dump_backtrace() will be reported with
an offset (which is strictly more correct than currently). Otherwise
there is no functional cahnge to this case.
3) When unwinding the current task with regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind is performed silently until the
next frame is the frame pointed to by regs->fp. Reporting starts
from regs->pc and continues from the frame in regs->fp.
Historically, this pre-unwind was necessary to correctly record
return addresses rewritten by the ftrace graph calller, but this is
no longer necessary as these are now recovered using the FP since
commit:
c6d3cd32fd0064af ("arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR")
This pre-unwind is not necessary to recover return addresses
rewritten by kretprobes, which historically were not recovered, and
are now recovered using the FP since commit:
cd9bc2c9258816dc ("arm64: Recover kretprobe modified return address in stacktrace")
Thus, this is functionally equivalent to calling arch_stack_walk()
with the current task and regs, which will start with regs->pc as the
PC and regs->fp as the next frame, without a pre-unwind.
This patch makes dump_backtrace() use arch_stack_walk(). This simplifies
dump_backtrace() and will permit subsequent changes to the unwind code.
Aside from the improved reporting when unwinding current without regs,
there should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
[Mark: elaborate commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently profile_pc() walks the stack of an interrupted context by
calling start_backtrace() with the context's PC and FP, and iterating
unwind steps using walk_stackframe(). This is functionally equivalent to
calling arch_stack_walk() with the interrupted context's pt_regs, which
will start with the PC and FP from the regs.
Make profile_pc() use arch_stack_walk(). This simplifies profile_pc(),
and in future will alow us to make walk_stackframe() private to
stacktrace.c.
At the same time, we remove the early return for when regs->pc is not in
lock functions, as this will be handled by the first call to the
profile_pc_cb() callback.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: remove early return, elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently return_address() walks the stack of the current task by
calling start_backtrace() with return_address as the PC and the frame
pointer of return_address() as the next frame, iterating unwind steps
using walk_stackframe(). This is functionally equivalent to calling
arch_stack_walk() for the current stack, which will start from its
caller (i.e. return_address()) as the PC and it's caller's frame record
as the next frame.
Make return_address() use arch_stackwalk(). This simplifies
return_address(), and in future will alow us to make walk_stackframe()
private to stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently, __get_wchan() walks the stack of a blocked task by calling
start_backtrace() with the task's saved PC and FP values, and iterating
unwind steps using unwind_frame(). The initialization is functionally
equivalent to calling arch_stack_walk() with the blocked task, which
will start with the task's saved PC and FP values.
Currently __get_wchan() always performs an initial unwind step, which
will stkip __switch_to(), but as this is now marked as a __sched
function, this no longer needs special handling and will be skipped in
the same way as other sched functions.
Make __get_wchan() use arch_stack_walk(). This simplifies __get_wchan(),
and in future will alow us to make unwind_frame() private to
stacktrace.c. At the same time, we can simplify the try_get_task_stack()
check and avoid the unnecessary `stack_page` variable.
The change to the skipping logic means we may terminate one frame
earlier than previously where there are an excessive number of sched
functions in the trace, but this isn't seen in practice, and wchan is
best-effort anyway, so this should not be a problem.
Other than the above, there should be no functional change as a result
of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
[Mark: rebase atop wchan changes, elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently perf_callchain_kernel() walks the stack of an interrupted
context by calling start_backtrace() with the context's PC and FP, and
iterating unwind steps using walk_stackframe(). This is functionally
equivalent to calling arch_stack_walk() with the interrupted context's
pt_regs, which will start with the PC and FP from the regs.
Make perf_callchain_kernel() use arch_stack_walk(). This simplifies
perf_callchain_kernel(), and in future will alow us to make
walk_stackframe() private to stacktrace.c.
At the same time, we update the callchain_trace() callback to check the
return value of perf_callchain_store(), which indicates whether there is
space for any further entries. When a non-zero value is returned,
further calls will be ignored, and are redundant, so we can stop the
unwind at this point.
We also remove the stale and confusing comment for callchain_trace.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: elaborate commit message, remove comment, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Unlike most architectures (and only in keeping with powerpc), arm64 has
a non __sched() function on the path to our cpu_switch_to() assembly
function.
It is expected that for a blocked task, in_sched_functions() can be used
to skip all functions between the raw context switch assembly and the
scheduler functions that call into __switch_to(). This is the behaviour
expected by stack_trace_consume_entry_nosched(), and the behaviour we'd
like to have such that we an simplify arm64's __get_wchan()
implementation to use arch_stack_walk().
This patch mark's arm64's __switch_to as __sched. This *will not* change
the behaviour of arm64's current __get_wchan() implementation, which
always performs an initial unwind step which skips __switch_to(). This
*will* change the behaviour of stack_trace_consume_entry_nosched() and
stack_trace_save_tsk() to match their expected behaviour on blocked
tasks, skipping all scheduler-internal functions including
__switch_to().
Other than the above, there should be no functional change as a result
of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We added stack_info::kr_cur in commit:
cd9bc2c9258816dc ("arm64: Recover kretprobe modified return address in stacktrace")
... but didn't add anything in the corresponding comment block.
For consistency, add a corresponding comment.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Make arch_stack_walk() available for ARCH_STACKWALK architectures
without it being entangled in STACKTRACE.
Link: https://lore.kernel.org/lkml/20211022152104.356586621@infradead.org/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[Mark: rebase, drop unnecessary arm change]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In kexec_page_alloc(), page_address() is called twice.
This patch add a new variable to help to reduce calls
to page_address().
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211125170600.1608-3-rongwei.wang@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.16
- set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
- show subsys nqn for duplicate cntlids (Keith Busch)
- disable namespace access for unsupported metadata (Keith Busch)
- report write pointer for a full zone as zone start + zone len
(Niklas Cassel)
- fix use after free when disconnecting a reconnecting ctrl
(Ruozhu Li)
- fix a list corruption in nvmet-tcp (Sagi Grimberg)"
* tag 'nvme-5.16-2021-12-10' of git://git.infradead.org/nvme:
nvmet-tcp: fix possible list corruption for unexpected command failure
nvme: fix use after free when disconnecting a reconnecting ctrl
nvme-multipath: set ana_log_size to 0 after free ana_log_buf
nvme: report write pointer for a full zone as zone start + zone len
nvme: disable namespace access for unsupported metadata
nvme: show subsys nqn for duplicate cntlids
|
|
This was found by coccicheck:
./drivers/irqchip/irq-bcm7120-l2.c,328,1-7,ERROR missing put_device;
call of_find_device_by_node on line 234, but without a corresponding
object release within this function.
./drivers/irqchip/irq-bcm7120-l2.c,341,1-7,ERROR missing put_device;
call of_find_device_by_node on line 234, but without a corresponding
object release within this function.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109055958.130287-1-ye.guojin@zte.com.cn
|
|
AMD proceessors define an address range that is reserved by HyperTransport
and causes a failure if used for guest physical addresses. Avoid
selftests failures by reserving those guest physical addresses; the
rules are:
- On parts with <40 bits, its fully hidden from software.
- Before Fam17h, it was always 12G just below 1T, even if there was more
RAM above this location. In this case we just not use any RAM above 1T.
- On Fam17h and later, it is variable based on SME, and is either just
below 2^48 (no encryption) or 2^43 (encryption).
Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210805105423.412878-1-pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not bail early if there are no bits set in the sparse banks for a
non-sparse, a.k.a. "all CPUs", IPI request. Per the Hyper-V spec, it is
legal to have a variable length of '0', e.g. VP_SET's BankContents in
this case, if the request can be serviced without the extra info.
It is possible that for a given invocation of a hypercall that does
accept variable sized input headers that all the header input fits
entirely within the fixed size header. In such cases the variable sized
input header is zero-sized and the corresponding bits in the hypercall
input should be set to zero.
Bailing early results in KVM failing to send IPIs to all CPUs as expected
by the guest.
Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211207220926.718794-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
hypercall
Prior to commit 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use
tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH |
KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs
and KVM_REQ_TLB_FLUSH is/was defined as:
(0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that
"This call guarantees that by the time control returns back to the
caller, the observable effects of all flushes on the specified virtual
processors have occurred." and without KVM_REQUEST_WAIT there's a small
chance that the vCPU making the TLB flush will resume running before
all IPIs get delivered to other vCPUs and a stale mapping can get read
there.
Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST:
kvm_hv_flush_tlb() is the sole caller which uses it for
kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where
KVM_REQUEST_WAIT makes a difference.
Cc: stable@kernel.org
Fixes: 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211209102937.584397-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new family type for AMD Family 19h Models 10h to 1Fh. Use this new
family type for Models A0h to AFh also.
Increase the maximum number of controllers from 8 to 12.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208174356.1997855-3-yazen.ghannam@amd.com
|
|
Include Registered-DDR5 and Load-Reduced DDR5 in the list of memory
types.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208174356.1997855-2-yazen.ghannam@amd.com
|
|
Adds dsi host controller support for the Unisoc's display subsystem.
Adds dsi phy support for the Unisoc's display subsystem.
Only MIPI DSI Displays supported, DP/TV/HMDI will be support
in the feature.
v1:
- Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
v2:
- Use drm_xxx to replace all DRM_XXX.
- Use kzalloc to replace devm_kzalloc for sprd_dsi structure init.
v4:
- Use drmm_helpers to allocate encoder.
- Move allocate encoder and connector to bind function.
v5:
- Drop the dsi ip file prefix.
- Fix the checkpatch warnings.
- Add Signed-off-by for dsi&dphy patch.
- Use the mode_flags of mipi_dsi_device to setup crtc DPI and EDPI mode.
v6:
- Redesign the way to access the dsi register.
- Reduce the dsi_context member variables.
v7:
- Fix codeing style issue by checkpatch.
- Drop the pll registers structure define.
- Use bridge API instead of drm panel API.
- Register mipi_dsi_host on probe phase;
- Remove some unused function.
v8:
- Fix missing signed-off-by.
- Move component_add to dsi_host.attach callback.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-7-kevin3.tang@gmail.com
|
|
Adds MIPI DSI Controller
support for Unisoc's display subsystem.
v5:
- Remove panel_in port for dsi node.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-6-kevin3.tang@gmail.com
|
|
Adds DPU(Display Processor Unit) support for the Unisoc's display
subsystem.
It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
v2:
- Use drm_xxx to replace all DRM_XXX.
- Use kzalloc to replace devm_kzalloc for sprd_dpu structure init.
v3:
- Remove dpu_layer stuff layer and commit layers by aotmic_update
v4:
- Use drmm_helpers to allocate crtc and planes.
- Move rotation enum definitions to crtc layer reg bitfields.
- Move allocate crtc and planes to bind function.
v5:
- Fix the checkpatch warnings.
- Use mode_set_nofb instead of mode_valid callback.
- Follow the OF-Graph bindings, use of_graph_get_port_by_id
instead of of_parse_phandle.
- Use zpos to represent the layer position.
- Rebase to last drm misc branch.
v6:
- Disable and clear interrupts before register dpu IRQ
- Init dpi config used by crtc_state->adjusted_mode on mode_set_nofb
- Remove enable_irq and disable_irq function call.
- Remove drm_format_info function call.
v7:
- Remove iommu error interrupt handling function.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-5-kevin3.tang@gmail.com
|
|
DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
which transfers the image data from a video memory buffer to an internal
LCD interface.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-4-kevin3.tang@gmail.com
|
|
Adds drm support for the Unisoc's display subsystem.
This is drm kms driver, this driver provides support for the
application framework in Android, Yocto and more.
Application framework can access Unisoc's display internal
peripherals through libdrm or libkms, it's test ok by modetest
(DRM/KMS test tool) and Android HWComposer.
v4:
- Move the devm_drm_dev_alloc to master_ops->bind function.
- The managed drmm_mode_config_init() it is no longer necessary for drivers to explicitly call drm_mode_config_cleanup, so delete it.
v5:
- Remove subdir-ccflgas-y for Makefile.
- Keep the selects sorted by alphabet for Kconfig.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-3-kevin3.tang@gmail.com
|
|
The Unisoc DRM master device is a virtual device needed to list all
DPU devices or other display interface nodes that comprise the
graphics subsystem
Unisoc's display pipeline have several components as below
description, multi display controllers and corresponding physical
interfaces.
For different display scenarios, dpu0 and dpu1 maybe binding to
different encoder.
E.g:
dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
dpu0 binding to DSI for primary display, and dpu1 binding to DP for
external display;
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-2-kevin3.tang@gmail.com
|
|
Return status directly from function called.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
This driver works by adjusting the divider on the DRAM controller's
module clock. Thus there is no fixed set of OPPs, only "full speed" down
to "quarter speed" (or whatever the maximum divider is on that variant).
It makes use of the MDFS hardware in the MBUS, in "DFS" mode, which
takes care of updating registers during the critical section while DRAM
is inaccessible.
This driver should support several sunxi SoCs, starting with the A33,
which have a DesignWare DDR3 controller with merged PHY register space
and the matching MBUS register layout (so not A63 or later). However,
the driver has only been tested on the A64/H5, so those are the only
compatibles enabled for now.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- Fix PENDING_ERROR leak in dma_fence_array_signaled() (Thomas Hellström)
Driver Changes:
- Fix runtime PM handling during PXP suspend (Tejas Upadhyay)
- Improve eviction performance on discrete by implementing async TTM moves (Thomas Hellström, Maarten Lankhorst)
- Improve robustness of error capture under memory pressure (Thomas Hellström)
- Fix GuC PMU versus GPU reset handling (Umesh Nerlige Ramappa)
- Use per device iommu check (Tvrtko Ursulin)
- Make error capture work with async migration (Thomas Hellström)
- Revert incorrect implementation of Wa_1508744258 causing hangs (José Roberto de Souza)
- Disable coarse power gating on some DG2 steppings workaround (Matt Roper)
- Add IC cache invalidation workaround on DG2 (Ramalingam C)
- Move two Icelake workarounds to the right place (Raviteja Goud Talla)
- Fix error pointer dereference in i915_gem_do_execbuffer() (Dan Carpenter)
- Fixup a couple of generic and DG2 specific issues in migration code (Matthew Auld)
- Fix kernel-doc warnings in i915_drm_object.c (Randy Dunlap)
- Drop stealing of bits from i915_sw_fence function pointer (Matthew Brost)
- Introduce new macros for i915 PTE (Michael Cheng)
- Prep work for engine reset by reset domain lookup (Tejas Upadhyay)
- Fixup drm-intel-gt-next build failure (Matthew Auld)
- Fix live_engine_busy_stats selftests in GuC mode (Umesh Nerlige Ramappa)
- Remove dma_resv_prune (Maarten Lankhorst)
- Preserve huge pages enablement after driver reload (Matthew Auld)
- Fix a NULL pointer dereference in igt_request_rewind() (selftests) (Zhou Qingyang)
- Add workaround numbers to GEN7_COMMON_SLICE_CHICKEN1 whitelisting (José Roberto de Souza)
- Increase timeouts in i915_gem_contexts selftests to handle GuC being slower (Bruce Chang)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_fbc.c
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YbIBOeqhn+nPzaYD@tursulin-mobl2
|
|
Addresses-Coverity-ID: 1493934 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20211208173321.26659-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.17:
UAPI Changes:
Cross-subsystem Changes:
* dma-buf: Make fences mandatory in dma_resv_add_excl_fence
Core Changes:
* Move hashtable to legacy code
* Return error pointers from struct drm_driver.gem_create_object
* cma-helper: Improve public interfaces; Remove CONFIG_DRM_KMS_CMA_HELPER option
* mipi-dbi: Don't depend on CMA helpers
* ttm: Don't include DRM hashtable; Stop prunning fences after wait; Documentation
Driver Changes:
* aspeed: Select CONFIG_DRM_GEM_CMA_HELPER
* bridge/lontium-lt9611: Fix HDMI sensing
* bridge/parade-ps8640: Fixes
* bridge/sn65dsi86: Defer probe is no dsi host found
* fsl-dcu: Select CONFIG_DRM_GEM_CMA_HELPER
* i915: Remove dma_resv_prune
* omapdrm: Fix scatterlist export; Support virtual planes; Fixes
* panel: Boe-tv110c9m,Inx-hj110iz: Update init code
* qxl: Use dma-resv iterator
* rockchip: Use generic fbdev emulation
* tidss: Fixes
* vmwgfx: Fix leak on probe errors; Fail probing on broken hosts; New
placement for MOB page tables; Hide internal BOs from userspace; Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YbHskHZc9HoAYuPZ@linux-uq9g.fritz.box
|
|
R-Car DU updates:
- DSI output support
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ya4/MCeuNf601tL4@pendragon.ideasonboard.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-08:
amdgpu:
- DPIA fix
- eDP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211209042824.6720-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
A fix to a error pointer dereference in gem_execbuffer and
a fix for GT initialization when GuC/HuC are used on ICL.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YbJVWYAd/jeERCYY@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix in syncobj to handle fence already signalled better, and a fix for
a ttm_bo_swapout eviction check.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211209124305.gxhid5zwf7m4oasn@houat
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.17-2021-12-02:
amdgpu:
- Use generic drm fb helpers
- PSR fixes
- Rework DCN3.1 clkmgr
- DPCD 1.3 fixes
- Misc display fixes can cleanups
- Clock query fixes for APUs
- LTTPR fixes
- DSC fixes
- Misc PM fixes
- RAS fixes
- OLED backlight fix
- SRIOV fixes
- Add STB (Smart Trace Buffer) for supported dGPUs
- IH rework
- Enable seamless boot for DCN3.01
amdkfd:
- Rework more stuff around IP discovery enumeration
- Further clean up of interfaces with amdgpu
- SVM fixes
radeon:
- Indentation fixes
UAPI:
- Add a new KFD header that defines some of the sysfs bitfields and enums that userspace has been using for a while
The corresponding bit-fields and enums in user mode are defined in
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/blob/master/include/hsakmttypes.h
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202191643.5970-1-alexander.deucher@amd.com
|
|
Use the dev_err_probe() helper, instead of open-coding the same
operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/2576cc15bdbb5be636640f491bcc087a334e2c02.1638959463.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
TEST: ping out, VRF bind - multicast IP [FAIL]
ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.
Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'more' is checked first. When !more is checked immediately after that,
it is always true. We should drop this check.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20211208024732.142541-5-sakiwit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
...and gpio-ranges
pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
side is registered first, but this breaks gpio hogs (which are
configured during gpiochip_add_data). Part of the hog initialisation
is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
yet been registered this results in an -EPROBE_DEFER from which it can
never recover.
Change the initialisation sequence to register the pinctrl driver
first.
This also solves a similar problem with the gpio-ranges property, which
is required in order for released pins to be returned to inputs.
Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The semantics of the rlimit max values differs from ucounts itself. When
creating a new userns, we store the current rlimit of the process in
ucount_max. Thus, the value of the limit in the parent userns is saved
in the created one.
The problem is that now we are taking the maximum value for counter from
the same userns. So for init_user_ns it will always be RLIM_INFINITY.
To fix the problem we need to check the counter value with the max value
stored in userns.
Reproducer:
su - test -c "ulimit -u 3; sleep 5 & sleep 6 & unshare -U --map-root-user sh -c 'sleep 7 & sleep 8 & date; wait'"
Before:
[1] 175
[2] 176
Fri Nov 26 13:48:20 UTC 2021
[1]- Done sleep 5
[2]+ Done sleep 6
After:
[1] 167
[2] 168
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: Interrupted system call
[1]- Done sleep 5
[2]+ Done sleep 6
Fixes: c54b245d0118 ("Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace")
Reported-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/024ec805f6e16896f0b23e094773790d171d2c1c.1638218242.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Quite a few small bug fixes old and new, also Doug Ledford is retiring
now, we thank him for his work. Details:
- Use after free in rxe
- mlx5 DM regression
- hns bugs triggred by device reset
- Two fixes for CONFIG_DEBUG_PREEMPT
- Several longstanding corner case bugs in hfi1
- Two irdma data path bugs in rare cases and some memory issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Don't arm the CQ more than two times if no CE for this CQ
RDMA/irdma: Report correct WC errors
RDMA/irdma: Fix a potential memory allocation issue in 'irdma_prm_add_pble_mem()'
RDMA/irdma: Fix a user-after-free in add_pble_prm
IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddr
IB/hfi1: Fix early init panic
IB/hfi1: Insure use of smp_processor_id() is preempt disabled
IB/hfi1: Correct guard on eager buffer deallocation
RDMA/rtrs: Call {get,put}_cpu_ptr to silence a debug kernel warning
RDMA/hns: Do not destroy QP resources in the hw resetting phase
RDMA/hns: Do not halt commands during reset until later
Remove Doug Ledford from MAINTAINERS
RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow
RDMA: Fix use-after-free in rxe_queue_cleanup
|
|
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
Under both -Warray-bounds and the object_size sanitizer, the compiler is
upset about accessing prev/next of sk_buff when the object it thinks it
is coming from is sk_buff_head. The warning is a false positive due to
the compiler taking a conservative approach, opting to warn at casting
time rather than access time.
However, in support of enabling -Warray-bounds globally (which has
found many real bugs), arrange things for sk_buff so that the compiler
can unambiguously see that there is no intention to access anything
except prev/next. Introduce and cast to a separate struct sk_buff_list,
which contains _only_ the first two fields, silencing the warnings:
In file included from ./include/net/net_namespace.h:39,
from ./include/linux/netdevice.h:37,
from net/core/netpoll.c:17:
net/core/netpoll.c: In function 'refill_skbs':
./include/linux/skbuff.h:2086:9: warning: array subscript 'struct sk_buff[0]' is partly outside array bounds of 'struct sk_buff_head[1]' [-Warray-bounds]
2086 | __skb_insert(newsk, next->prev, next, list);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/netpoll.c:49:28: note: while referencing 'skb_pool'
49 | static struct sk_buff_head skb_pool;
| ^~~~~~~~
This change results in no executable instruction differences.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207062758.2324338-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.
The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.
This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.
Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xfrm4_fill_dst() and xfrm6_fill_dst() build dst,
getting a device reference that will likely be released
by standard dst_release() code.
We have to track these references or risk a warning if
CONFIG_NET_DEV_REFCNT_TRACKER=y
Note to XFRM maintainers :
Error path in xfrm6_fill_dst() releases the reference,
but does not clear xdst->u.dst.dev, so I wonder
if this could lead to double dev_put() in some cases,
where a dst_release() _is_ called by the callers in their
error path.
This extra dev_put() was added in commit 84c4a9dfbf430 ("xfrm6:
release dev before returning error")
Fixes: 9038c320001d ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <amwang@redhat.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/20211207193203.2706158-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
