summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-05net: hns3: check msg_data before memcpy in hclgevf_send_mbx_msgWeihang Li
The value of msg_data may be NULL in some cases, which will cause errors reported by some compiler. So this patch adds a check to fix it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: set default value for param "type" in hclgevf_bind_ring_to_vectorPeng Li
The value of param type is always not changed in hclgevf_bind_ring_to_vector, move the assignment to front of "for {}" can reduce the redundant assignment. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: add all IMP return codePeng Li
Currently, the HNS3 driver just defines part of IMP return code, This patch supplements all the remaining IMP return code, and adds a function to convert this code to the error number. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix port capbility updating issueJian Shen
Currently, the driver queries the media port information, and updates the port capability periodically. But it sets an error mac->speed_type value, which stops update port capability. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix flow control configure issue for fibre portJian Shen
Flow control autoneg is unsupported for fibre port. It takes no effect for flow control when restart autoneg. This patch fixes it, return -EOPNOTSUPP when user tries to enable flow control autoneg. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: enable broadcast promisc mode when initializing VFJian Shen
For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: remove unused parameter from skb_checksum_try_convertLi RongQing
the check parameter is never used Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge branch 'mlxsw-Enable-disable-PTP-shapers'David S. Miller
Ido Schimmel says: ==================== mlxsw: Enable/disable PTP shapers Shalom says: In order to get more accurate hardware time stamping in Spectrum-1, the driver needs to apply a shaper on the port for speeds lower than 40Gbps. This shaper is called a PTP shaper and it is applied on hierarchy 0, which is the port hierarchy. This shaper may affect the shaper rates of all hierarchies. This patchset adds the ability to enable or disable the PTP shaper on the port in two scenarios: 1. When the user wants to enable/disable the hardware time stamping 2. When the port is brought up or down (including port speed change) Patch #1 adds the QEEC.ptps field that is used for enabling or disabling the PTP shaper on a port. Patch #2 adds a note about disabling the PTP shaper when calling to mlxsw_sp_port_ets_maxrate_set(). Patch #3 adds the QPSC register that is responsible for configuring the PTP shaper parameters per speed. Patch #4 sets the PTP shaper parameters during the ptp_init(). Patch #5 adds new operation for getting the port's speed. Patch #6 enables/disables the PTP shaper when turning on or off the hardware time stamping. Patch #7 enables/disables the PTP shaper when the port's status has changed (including port speed change). Patch #8 applies the PTP shaper enable/disable logic by filling the PTP shaper parameters array. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Apply the PTP shaper enable/disable logicShalom Toledo
Apply by filling the PTP shaper parameters array. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Set up PTP shaper when port status has changedShalom Toledo
When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Enable/disable PTP shaper on a port when getting ↵Shalom Toledo
HWTSTAMP on/off In order to get more accurate hardware time stamping, the driver needs to enable PTP shaper on the port, for speeds lower than 40 Gbps. Enable the PTP shaper on the port when the user turns on the hardware time stamping, and disable it when the user turns off the hardware time stamping. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Add new operation for getting the port's speedShalom Toledo
New operation for getting the port's speed as part of port-type-speed operations. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Set the PTP shaper parametersShalom Toledo
Set the PTP shaper parameters during the ptp_init(). For different speeds, there are different parameters. When the port's speed changes and PTP shaper is enabled, the firmware changes the ETS shaper values according to the PTP shaper parameters for this new speed. The PTP shaper parameters array is left empty for now, will be filled in a follow-up patch. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: reg: Add QoS PTP Shaper Configuration RegisterShalom Toledo
The QPSC allows advanced configuration of the PTP shapers. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Add note about the PTP shaperShalom Toledo
Add note about disabling the PTP shaper when calling to mlxsw_sp_port_ets_maxrate_set(). Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: reg: Add ptps field in QoS ETS Element Configuration RegisterShalom Toledo
The PTP Shaper field is used for enabling and disabling of port-rate based shaper which is slightly lower than port rate. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: socionext: remove set but not used variable 'pkts'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_clean_tx_dring': drivers/net/ethernet/socionext/netsec.c:637:15: warning: variable 'pkts' set but not used [-Wunused-but-set-variable] It is not used since commit ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: ethernet: allwinner: Remove unneeded memsetHariprasad Kelam
Remove unneeded memset as alloc_etherdev is using kvzalloc which uses __GFP_ZERO flag Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/ethernet: using dev_get_drvdata directlyFuqian Huang
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/can: using dev_get_drvdata directlyFuqian Huang
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge branch 'hsr-bug-fixes'David S. Miller
Cong Wang says: ==================== hsr: a few bug fixes This patchset contains 3 bug fixes for hsr triggered by a syzbot reproducer, please check each patch for details. ==================== Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
2019-07-05hsr: fix a NULL pointer deref in hsr_dev_xmit()Cong Wang
hsr_port_get_hsr() could return NULL and kernel could crash: BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000074b84067 P4D 8000000074b84067 PUD 7057d067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 754 Comm: a.out Not tainted 5.2.0-rc6+ #718 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:hsr_dev_xmit+0x20/0x31 Code: 48 8b 1b eb e0 5b 5d 41 5c c3 66 66 66 66 90 55 48 89 fd 48 8d be 40 0b 00 00 be 04 00 00 00 e8 ee f2 ff ff 48 89 ef 48 89 c6 <48> 8b 40 10 48 89 45 10 e8 6c 1b 00 00 31 c0 5d c3 66 66 66 66 90 RSP: 0018:ffffb5b400003c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9821b4509a88 RCX: 0000000000000000 RDX: ffff9821b4509a88 RSI: 0000000000000000 RDI: ffff9821bc3fc7c0 RBP: ffff9821bc3fc7c0 R08: 0000000000000000 R09: 00000000000c2019 R10: 0000000000000000 R11: 0000000000000002 R12: ffff9821bc3fc7c0 R13: ffff9821b4509a88 R14: 0000000000000000 R15: 000000000000006e FS: 00007fee112a1800(0000) GS:ffff9821bd800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006e9ce000 CR4: 00000000000406f0 Call Trace: <IRQ> netdev_start_xmit+0x1b/0x38 dev_hard_start_xmit+0x121/0x21e ? validate_xmit_skb.isra.0+0x19/0x1e3 __dev_queue_xmit+0x74c/0x823 ? lockdep_hardirqs_on+0x12b/0x17d ip6_finish_output2+0x3d3/0x42c ? ip6_mtu+0x55/0x5c ? mld_sendpack+0x191/0x229 mld_sendpack+0x191/0x229 mld_ifc_timer_expire+0x1f7/0x230 ? mld_dad_timer_expire+0x58/0x58 call_timer_fn+0x12e/0x273 __run_timers.part.0+0x174/0x1b5 ? mld_dad_timer_expire+0x58/0x58 ? sched_clock_cpu+0x10/0xad ? mark_lock+0x26/0x1f2 ? __lock_is_held+0x40/0x71 run_timer_softirq+0x26/0x48 __do_softirq+0x1af/0x392 irq_exit+0x53/0xa2 smp_apic_timer_interrupt+0x1c4/0x1d9 apic_timer_interrupt+0xf/0x20 </IRQ> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: implement dellink to clean up resourcesCong Wang
hsr_link_ops implements ->newlink() but not ->dellink(), which leads that resources not released after removing the device, particularly the entries in self_node_db and node_db. So add ->dellink() implementation to replace the priv_destructor. This also makes the code slightly easier to understand. Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: fix a memory leak in hsr_del_port()Cong Wang
hsr_del_port() should release all the resources allocated in hsr_add_port(). As a consequence of this change, hsr_for_each_port() is no longer safe to work with hsr_del_port(), switch to list_for_each_entry_safe() as we always hold RTNL lock. Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05xfs: disable map_sync for async flushPankaj Gupta
Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and xfs. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05ext4: disable map_sync for async flushPankaj Gupta
Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and ext4. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05dax: check synchronous mapping is supportedPankaj Gupta
This patch introduces 'daxdev_mapping_supported' helper which checks if 'MAP_SYNC' is supported with filesystem mapping. It also checks if corresponding dax_device is synchronous. Virtio pmem device is asynchronous and does not not support VM_SYNC. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05dm: enable synchronous daxPankaj Gupta
This patch sets dax device 'DAXDEV_SYNC' flag if all the target devices of device mapper support synchrononous DAX. If device mapper consists of both synchronous and asynchronous dax devices, we don't set 'DAXDEV_SYNC' flag. 'dm_table_supports_dax' is refactored to pass 'iterate_devices_fn' as argument so that the callers can pass the appropriate functions. Suggested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05libnvdimm: add dax_dev sync flagPankaj Gupta
This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05virtio-pmem: Add virtio pmem driverPankaj Gupta
This patch adds virtio-pmem driver for KVM guest. Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems. This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jakub Staron <jstaron@google.com> Tested-by: Jakub Staron <jstaron@google.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05libnvdimm: nd_region flush callback supportPankaj Gupta
This patch adds functionality to perform flush from guest to host over VIRTIO. We are registering a callback based on 'nd_region' type. virtio_pmem driver requires this special flush function. For rest of the region types we are registering existing flush function. Report error returned by host fsync failure to userspace. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05libnvdimm, namespace: Drop uuid_t implementation detailAndy Shevchenko
There is no need for caller to know how uuid_t type is constructed. Thus, whenever we use it the implementation details are not needed. Drop it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-06selftests/bpf: add test_tcp_rtt to .gitignoreStanislav Fomichev
Forgot to add it in the original patch. Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-06selftests/bpf: fix test_align liveliness expectationsStanislav Fomichev
Commit 2589726d12a1 ("bpf: introduce bounded loops") caused a change in the way some registers liveliness is reported in the test_align. Add missing "_w" to a couple of tests. Note, there are no offset changes! Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-07-05 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Fix a WARN_ON with ipv6 that triggered because of a forgotten break statement. From Florian Westphal. 3) Remove xfrmi_init_net, it is not needed. From Li RongQing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-07-05 1) Fix xfrm selector prefix length validation for inter address family tunneling. From Anirudh Gupta. 2) Fix a memleak in pfkey. From Jeremy Sowden. 3) Fix SA selector validation to allow empty selectors again. From Nicolas Dichtel. 4) Select crypto ciphers for xfrm_algo, this fixes some randconfig builds. From Arnd Bergmann. 5) Remove a duplicated assignment in xfrm_bydst_resize. From Cong Wang. 6) Fix a hlist corruption on hash rebuild. From Florian Westphal. 7) Fix a memory leak when creating xfrm interfaces. From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05bpf, riscv: Enable zext optimization for more RV64G ALU opsLuke Nelson
Commit 66d0d5a854a6 ("riscv: bpf: eliminate zero extension code-gen") added the new zero-extension optimization for some BPF ALU operations. Since then, bugs in the JIT that have been fixed in the bpf tree require this optimization to be added to other operations: commit 1e692f09e091 ("bpf, riscv: clear high 32 bits for ALU32 add/sub/neg/lsh/rsh/arsh"), and commit fe121ee531d1 ("bpf, riscv: clear target register high 32-bits for and/or/xor on ALU32"). Now that these have been merged to bpf-next, the zext optimization can be enabled for the fixed operations. Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Jiong Wang <jiong.wang@netronome.com> Cc: Xi Wang <xi.wang@gmail.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Acked-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05netfilter: nf_tables: __nft_expr_type_get() selects specific family typePablo Neira Ayuso
In case that there are two types, prefer the family specify extension. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-05tools: bpftool: Fix json dump crash on powerpcJiri Olsa
Michael reported crash with by bpf program in json mode on powerpc: # bpftool prog -p dump jited id 14 [{ "name": "0xd00000000a9aa760", "insns": [{ "pc": "0x0", "operation": "nop", "operands": [null ] },{ "pc": "0x4", "operation": "nop", "operands": [null ] },{ "pc": "0x8", "operation": "mflr", Segmentation fault (core dumped) The code is assuming char pointers in format, which is not always true at least for powerpc. Fixing this by dumping the whole string into buffer based on its format. Please note that libopcodes code does not check return values from fprintf callback, but as per Jakub suggestion returning -1 on allocation failure so we do the best effort to propagate the error. Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command") Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05netfilter: nf_tables: add nft_expr_type_request_module()Pablo Neira Ayuso
This helper function makes sure the family specific extension is loaded. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-05tools: bpftool: add "prog run" subcommand to test-run programsQuentin Monnet
Add a new "bpftool prog run" subcommand to run a loaded program on input data (and possibly with input context) passed by the user. Print output data (and output context if relevant) into a file or into the console. Print return value and duration for the test run into the console. A "repeat" argument can be passed to run the program several times in a row. The command does not perform any kind of verification based on program type (Is this program type allowed to use an input context?) or on data consistency (Can I work with empty input data?), this is left to the kernel. Example invocation: # perl -e 'print "\x0" x 14' | ./bpftool prog run \ pinned /sys/fs/bpf/sample_ret0 \ data_in - data_out - repeat 5 0000000 0000 0000 0000 0000 0000 0000 0000 | ........ ...... Return value: 0, duration (average): 260ns When one of data_in or ctx_in is "-", bpftool reads from standard input, in binary format. Other formats (JSON, hexdump) might be supported (via an optional command line keyword like "data_fmt_in") in the future if relevant, but this would require doing more parsing in bpftool. v2: - Fix argument names for function check_single_stdin(). (Yonghong) Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05blk-iolatency: fix STS_AGAIN handlingDennis Zhou
The iolatency controller is based on rq_qos. It increments on rq_qos_throttle() and decrements on either rq_qos_cleanup() or rq_qos_done_bio(). a3fb01ba5af0 fixes the double accounting issue where blk_mq_make_request() may call both rq_qos_cleanup() and rq_qos_done_bio() on REQ_NO_WAIT. So checking STS_AGAIN prevents the double decrement. The above works upstream as the only way we can get STS_AGAIN is from blk_mq_get_request() failing. The STS_AGAIN handling isn't a real problem as bio_endio() skipping only happens on reserved tag allocation failures which can only be caused by driver bugs and already triggers WARN. However, the fix creates a not so great dependency on how STS_AGAIN can be propagated. Internally, we (Facebook) carry a patch that kills read ahead if a cgroup is io congested or a fatal signal is pending. This combined with chained bios progagate their bi_status to the parent is not already set can can cause the parent bio to not clean up properly even though it was successful. This consequently leaks the inflight counter and can hang all IOs under that blkg. To nip the adverse interaction early, this removes the rq_qos_cleanup() callback in iolatency in favor of cleaning up always on the rq_qos_done_bio() path. Fixes: a3fb01ba5af0 ("blk-iolatency: only account submitted bios") Debugged-by: Tejun Heo <tj@kernel.org> Debugged-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-05drm/amdgpu: add mode1 (psp) reset for navi asicKevin Wang
add mode1 (by psp) reset for navi asic. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amdgpu: Disable ras features on all IPs before gpu resetxinhui pan
Perform a ras_suspend to disable ras on all IPs to workaround some ROCm stability issue. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amd/powerplay: add baco smu reset function for smu11Kevin Wang
add baco reset support for smu11. it can help gpu do asic reset when gpu recovery. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amd/powerplay: increase waiting time for smu responseJack Xiao
We observed some SMU commands take more time for execution, so increase waiting time for response. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amd/powerplay/smu7_hwmgr: replace blocking delay with non-blockingYrjan Skrimstad
This driver currently contains a repeated 500ms blocking delay call which causes frequent major buffer underruns in PulseAudio. This patch fixes this issue by replacing the blocking delay with a non-blocking sleep call. Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amdgpu: Use kmemdup rather than duplicating its implementationFuqian Huang
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Reviewed-by: Christian König <Christian.Koenig@amd.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05Merge branch 'bpf-libbpf-int-btf-map'Daniel Borkmann
Andrii Nakryiko says: ==================== This patch set implements an update to how BTF-defined maps are specified. The change is in how integer attributes, e.g., type, max_entries, map_flags, are specified: now they are captured as part of map definition struct's BTF type information (using array dimension), eliminating the need for compile-time data initialization and keeping all the metadata in one place. All existing selftests that were using BTF-defined maps are updated, along with some other selftests, that were switched to new syntax. v4->v5: - revert sample_map_ret0.c, which is loaded with iproute2 (kernel test robot); v3->v4: - add acks; - fix int -> uint type in commit message; v2->v3: - rename __int into __uint (Yonghong); v1->v2: - split bpf_helpers.h change from libbpf change (Song). ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-09-21 10:51:22 +0000