summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-04cxl/core: Remove cxld_const_init in cxl_decoder_alloc()Nathan Chancellor
Commit 48667f676189 ("cxl/core: Split decoder setup into alloc + add") aimed to fix a large stack frame warning but from v5 to v6, it introduced a new instance of the warning due to allocating cxld_const_init on the stack, which was done due to the use of const on the nr_target member of the cxl_decoder struct. With ARCH=arm allmodconfig minus CONFIG_KASAN: GCC 11.2.0: drivers/cxl/core/bus.c: In function ‘cxl_decoder_alloc’: drivers/cxl/core/bus.c:523:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] 523 | } | ^ cc1: all warnings being treated as errors Clang 12.0.1: drivers/cxl/core/bus.c:486:21: error: stack frame size of 1056 bytes in function 'cxl_decoder_alloc' [-Werror,-Wframe-larger-than=] struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets) ^ 1 error generated. Revert that part of the change, which makes the stack frame of cxl_decoder_alloc() much more reasonable. Fixes: 48667f676189 ("cxl/core: Split decoder setup into alloc + add") Link: https://github.com/ClangBuiltLinux/linux/issues/1539 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211210213627.2477370-1-nathan@kernel.org Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-01-04of: unittest: re-implement overlay trackingFrank Rowand
Some overlays are tracked when they are applied. The tracked overlays are later removed after the overlay tests are completed. The old implementation makes assumptions about the expected values for overlay changeset id created by the overlay apply which result in fragile code. The new code removes the assumptions. A symptom that exposes a problem with the tracking code is a warning "UBSAN: shift-out-of-bounds in drivers/of/unittest.c:1933:36", Kernel Version: 5.15-rc7, PPC-64, Talos II. This results from variable "id" value of -1 in the final line of of_unittest_untrack_overlay(). Reported-by: erhard_f@mailbox.org Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220101033329.1277779-3-frowand.list@gmail.com
2022-01-04of: unittest: change references to obsolete overlay idFrank Rowand
Unittest inconsistently interchanges overlay changeset id and overlay id. Change variable names of overlay id to overlay changeset id. Do not fix variable names in the overlay tracking functions of_unittest_overlay_tracked(), of_unittest_track_overlay(), and of_unittest_destroy_tracked_overlays() which will be replaced in a following commit. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220101033329.1277779-2-frowand.list@gmail.com
2022-01-04dt-bindings: display: enable port jdi,lt070me05000David Heidelberg
Enable port inside panel bindings. Fixes warnings generated by `make qcom-apq8064-asus-nexus7-flo.dtb` as: arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211224195354.78362-1-david@ixit.cz
2022-01-04dt-bindings: vendor-prefixes: add OnePlusStanislav Jakubek
Add vendor prefix for OnePlus (https://www.oneplus.com/) Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223141002.GA5979@standask-GA-A55M-S2HP
2022-01-04dt-bindings: display: st,stm32-dsi: Fix panel node name in exampleRob Herring
With 'unevaluatedProperties' support enabled, the st,stm32-dsi binding has a new warning: Documentation/devicetree/bindings/display/st,stm32-dsi.example.dt.yaml: dsi@5a000000: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected) The documented child node name is 'panel', so update the example. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221125145.1195234-1-robh@kernel.org
2022-01-04dt-bindings: memory: Document Tegra210 EMC tableThierry Reding
Add device tree bindings for the Tegra210 EMC table that is passed via a reserved-memory device tree node. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217165919.2700920-1-thierry.reding@gmail.com
2022-01-05parisc: decompressor: do not copy source files while buildingMasahiro Yamada
As commit 7ae4a78daacf ("ARM: 8969/1: decompressor: simplify libfdt builds") stated, copying source files during the build time may not end up with as clean code as expected. Do similar for parisc to clean up the Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
2022-01-05powerpc/opal: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the powerpc opal dump and elog sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220104161318.1306023-1-gregkh@linuxfoundation.org
2022-01-05powerpc/cacheinfo: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the powerpc cacheinfo sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220104155450.1291277-1-gregkh@linuxfoundation.org
2022-01-04iavf: Fix limit of total number of queues to active queues of VFKaren Sornek
In the absence of this validation, if the user requests to configure queues more than the enabled queues, it results in sending the requested number of queues to the kernel stack (due to the asynchronous nature of VF response), in which case the stack might pick a queue to transmit that is not enabled and result in Tx hang. Fix this bug by limiting the total number of queues allocated for VF to active queues of VF. Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04i40e: Fix incorrect netdev's real number of RX/TX queuesJedrzej Jagielski
There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net/<iface>/queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04i40e: Fix for displaying message regarding NVM versionMateusz Palczewski
When loading the i40e driver, it prints a message like: 'The driver for the device detected a newer version of the NVM image v1.x than expected v1.y. Please install the most recent version of the network driver.' This is misleading as the driver is working as expected. Fix that by removing the second part of message and changing it from dev_info to dev_dbg. Fixes: 4fb29bddb57f ("i40e: The driver now prints the API version in error message") Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04i40e: fix use-after-free in i40e_sync_filters_subtask()Di Zhu
Using ifconfig command to delete the ipv6 address will cause the i40e network card driver to delete its internal mac_filter and i40e_service_task kernel thread will concurrently access the mac_filter. These two processes are not protected by lock so causing the following use-after-free problems. print_address_description+0x70/0x360 ? vprintk_func+0x5e/0xf0 kasan_report+0x1b2/0x330 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e] i40e_sync_filters_subtask+0xe3/0x130 [i40e] i40e_service_task+0x195/0x24c0 [i40e] process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 ? process_one_work+0x7d0/0x7d0 kthread+0x1c3/0x1f0 ? kthread_park+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 2279810: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0xf3/0x1e0 i40e_add_filter+0x127/0x2b0 [i40e] i40e_add_mac_filter+0x156/0x190 [i40e] i40e_addr_sync+0x2d/0x40 [i40e] __hw_addr_sync_dev+0x154/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_add+0x6c/0x90 igmp6_group_added+0x214/0x230 __ipv6_dev_mc_inc+0x338/0x4f0 addrconf_join_solict.part.7+0xa2/0xd0 addrconf_dad_work+0x500/0x980 process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 kthread+0x1c3/0x1f0 ret_from_fork+0x35/0x40 Freed by task 2547073: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1b0 __i40e_del_filter+0xa3/0xf0 [i40e] i40e_del_mac_filter+0xf3/0x130 [i40e] i40e_addr_unsync+0x85/0xa0 [i40e] __hw_addr_sync_dev+0x9d/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_del+0x69/0x80 igmp6_group_dropped+0x279/0x510 __ipv6_dev_mc_dec+0x174/0x220 addrconf_leave_solict.part.8+0xa2/0xd0 __ipv6_ifa_notify+0x4cd/0x570 ipv6_ifa_notify+0x58/0x80 ipv6_del_addr+0x259/0x4a0 inet6_addr_del+0x188/0x260 addrconf_del_ifaddr+0xcc/0x130 inet6_ioctl+0x152/0x190 sock_do_ioctl+0xd8/0x2b0 sock_ioctl+0x2e5/0x4c0 do_vfs_ioctl+0x14e/0xa80 ksys_ioctl+0x7c/0xa0 __x64_sys_ioctl+0x42/0x50 do_syscall_64+0x98/0x2c0 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Di Zhu <zhudi2@huawei.com> Signed-off-by: Rui Zhang <zhangrui182@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04i40e: Fix to not show opcode msg on unsuccessful VF MAC changeMateusz Palczewski
Hide i40e opcode information sent during response to VF in case when untrusted VF tried to change MAC on the VF interface. This is implemented by adding an additional parameter 'hide' to the response sent to VF function that hides the display of error information, but forwards the error code to VF. Previously it was not possible to send response with some error code to VF without displaying opcode information. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04f2fs: remove redunant invalidate compress pagesFengnan Chang
Compress page will invalidate in truncate block process too, so remove redunant invalidate compress pages in f2fs_evict_inode. Signed-off-by: Fengnan Chang <changfengnan@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: Simplify bool conversionYang Li
Fix the following coccicheck warning: ./fs/f2fs/sysfs.c:491:41-46: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: don't drop compressed page cache in .{invalidate,release}pageChao Yu
For compressed inode, in .{invalidate,release}page, we will call f2fs_invalidate_compress_pages() to drop all compressed page cache of current inode. But we don't need to drop compressed page cache synchronously in .invalidatepage, because, all trancation paths of compressed physical block has been covered with f2fs_invalidate_compress_page(). And also we don't need to drop compressed page cache synchronously in .releasepage, because, if there is out-of-memory, we can count on page cache reclaim on sbi->compress_inode. BTW, this patch may fix the issue reported below: https://lore.kernel.org/linux-f2fs-devel/20211202092812.197647-1-changfengnan@vivo.com/T/#u Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: fix to reserve space for IO align featureChao Yu
https://bugzilla.kernel.org/show_bug.cgi?id=204137 With below script, we will hit panic during new segment allocation: DISK=bingo.img MOUNT_DIR=/mnt/f2fs dd if=/dev/zero of=$DISK bs=1M count=105 mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict" for (( i = 0; i < 4096; i++ )); do name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10` mkdir $MOUNT_DIR/$name done umount $MOUNT_DIR rm $DISK --- Core dump --- Call Trace: allocate_segment_by_default+0x9d/0x100 [f2fs] f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs] do_write_page+0x62/0x110 [f2fs] f2fs_outplace_write_data+0x43/0xc0 [f2fs] f2fs_do_write_data_page+0x386/0x560 [f2fs] __write_data_page+0x706/0x850 [f2fs] f2fs_write_cache_pages+0x267/0x6a0 [f2fs] f2fs_write_data_pages+0x19c/0x2e0 [f2fs] do_writepages+0x1c/0x70 __filemap_fdatawrite_range+0xaa/0xe0 filemap_fdatawrite+0x1f/0x30 f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs] block_operations+0xdc/0x350 [f2fs] f2fs_write_checkpoint+0x104/0x1150 [f2fs] f2fs_sync_fs+0xa2/0x120 [f2fs] f2fs_balance_fs_bg+0x33c/0x390 [f2fs] f2fs_write_node_pages+0x4c/0x1f0 [f2fs] do_writepages+0x1c/0x70 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x273/0x5c0 wb_writeback+0xff/0x2e0 wb_workfn+0xa1/0x370 process_one_work+0x138/0x350 worker_thread+0x4d/0x3d0 kthread+0x109/0x140 ret_from_fork+0x25/0x30 The root cause here is, with IO alignment feature enables, in worst case, we need F2FS_IO_SIZE() free blocks space for single one 4k write due to IO alignment feature will fill dummy pages to make IO being aligned. So we will easily run out of free segments during non-inline directory's data writeback, even in process of foreground GC. In order to fix this issue, I just propose to reserve additional free space for IO alignment feature to handle worst case of free space usage ratio during FGGC. Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: fix to check available space of CP area correctly in update_ckpt_flags()Chao Yu
Otherwise, nat_bit area may be persisted across boundary of CP area during nat_bit rebuilding. Fixes: 94c821fb286b ("f2fs: rebuild nat_bits during umount") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: support fault injection to f2fs_trylock_op()Chao Yu
f2fs: support fault injection for f2fs_trylock_op() This patch supports to inject fault into f2fs_trylock_op(). Usage: a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or b) mount -o fault_type=65536 <dev> <mountpoint> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: clean up __find_inline_xattr() with __find_xattr()Chao Yu
Just cleanup, no logic change. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()Chao Yu
As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215235 - Overview page fault in f2fs_setxattr() when mount and operate on corrupted image - Reproduce tested on kernel 5.16-rc3, 5.15.X under root 1. unzip tmp7.zip 2. ./single.sh f2fs 7 Sometimes need to run the script several times - Kernel dump loop0: detected capacity change from 0 to 131072 F2FS-fs (loop0): Found nat_bits in checkpoint F2FS-fs (loop0): Mounted with checkpoint version = 7548c2ee BUG: unable to handle page fault for address: ffffe47bc7123f48 RIP: 0010:kfree+0x66/0x320 Call Trace: __f2fs_setxattr+0x2aa/0xc00 [f2fs] f2fs_setxattr+0xfa/0x480 [f2fs] __f2fs_set_acl+0x19b/0x330 [f2fs] __vfs_removexattr+0x52/0x70 __vfs_removexattr_locked+0xb1/0x140 vfs_removexattr+0x56/0x100 removexattr+0x57/0x80 path_removexattr+0xa3/0xc0 __x64_sys_removexattr+0x17/0x20 do_syscall_64+0x37/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is in __f2fs_setxattr(), we missed to do sanity check on last xattr entry, result in out-of-bound memory access during updating inconsistent xattr data of target inode. After the fix, it can detect such xattr inconsistency as below: F2FS-fs (loop11): inode (7) has invalid last xattr entry, entry_size: 60676 F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has invalid last xattr entry, entry_size: 47736 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: do not bother checkpoint by f2fs_get_node_infoJaegeuk Kim
This patch tries to mitigate lock contention between f2fs_write_checkpoint and f2fs_get_node_info along with nat_tree_lock. The idea is, if checkpoint is currently running, other threads that try to grab nat_tree_lock would be better to wait for checkpoint. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04f2fs: avoid down_write on nat_tree_lock during checkpointJaegeuk Kim
Let's cache nat entry if there's no lock contention only. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-04Merge tag 'clk-v5.17-samsung' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung Pull Samsung clk driver updates from Sylwester Nawrocki: - removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - refactoring of the CPU clocks registration to use common interface - an update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) * tag 'clk-v5.17-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: Add initial Exynos7885 clock driver clk: samsung: clk-pll: Add support for pll1417x clk: samsung: Make exynos850_register_cmu shared dt-bindings: clock: Document Exynos7885 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos7885 CMU clk: samsung: exynos850: Add missing sysreg clocks dt-bindings: clock: Add bindings for Exynos850 sysreg clocks clk: samsung: exynos850: Register clocks early clk: samsung: exynos850: Keep some crucial clocks running clk: samsung: exynos850: Implement CMU_CMGP domain dt-bindings: clock: Add bindings for Exynos850 CMU_CMGP clk: samsung: exynos850: Implement CMU_APM domain dt-bindings: clock: Add bindings for Exynos850 CMU_APM clk: samsung: Update CPU clk registration clk: samsung: Remove meaningless __init and extern from header files clk: samsung: remove __clk_lookup() usage dt-bindings: clock: samsung: add IDs for some core clocks
2022-01-04ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtypeSudeep Holla
PCC OpRegion provides a mechanism to communicate with the platform directly from the AML. PCCT provides the list of PCC channel available in the platform, a subset or all of them can be used in PCC Opregion. This patch registers the PCC OpRegion handler before ACPI tables are loaded. This relies on the special context data passed to identify and set up the PCC channel before the OpRegion handler is executed for the first time. Typical PCC Opregion declaration looks like this: OperationRegion (PFRM, PCC, 2, 0x74) Field (PFRM, ByteAcc, NoLock, Preserve) { SIGN, 32, FLGS, 32, LEN, 32, CMD, 32, DATA, 800 } It contains four named double words followed by 100 bytes of buffer names DATA. ASL can fill out the buffer something like: /* Create global or local buffer */ Name (BUFF, Buffer (0x0C){}) /* Create double word fields over the buffer */ CreateDWordField (BUFF, 0x0, WD0) CreateDWordField (BUFF, 0x04, WD1) CreateDWordField (BUFF, 0x08, WD2) /* Fill the named fields */ WD0 = 0x50434300 SIGN = BUFF WD0 = 1 FLGS = BUFF WD0 = 0x10 LEN = BUFF /* Fill the payload in the DATA buffer */ WD0 = 0 WD1 = 0x08 WD2 = 0 DATA = BUFF /* Write to CMD field to trigger handler */ WD0 = 0x4404 CMD = BUFF This buffer is received by acpi_pcc_opregion_space_handler. This handler will fetch the complete buffer via internal_pcc_buffer. The setup handler will receive the special PCC context data which will contain the PCC channel index which used to set up the channel. The buffer pointer and length is saved in region context which is then used in the handler. (kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER) Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04ieee802154: atusb: fix uninit value in atusb_set_extended_addrPavel Skripkin
Alexander reported a use of uninitialized value in atusb_set_extended_addr(), that is caused by reading 0 bytes via usb_control_msg(). Fix it by validating if the number of bytes transferred is actually correct, since usb_control_msg() may read less bytes, than was requested by caller. Fail log: BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-01-04dm space map common: add bounds check to sm_ll_lookup_bitmap()Joe Thornber
Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap(). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-01-04dm btree: add a defensive bounds check to insert_at()Joe Thornber
Corrupt metadata could trigger an out of bounds write. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-01-04dm btree remove: change a bunch of BUG_ON() calls to proper errorsJoe Thornber
Abuse of BUG_ON() is never appropriate, best to propagate errors to fail gracefully (rather than take the entire system down). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-01-04truncate: Add truncate_cleanup_folio()Matthew Wilcox (Oracle)
Convert both callers of truncate_cleanup_page() to use truncate_cleanup_folio() instead. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Add filemap_release_folio()Matthew Wilcox (Oracle)
Reimplement try_to_release_page() as a wrapper around filemap_release_folio(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Use a folio in filemap_page_mkwriteMatthew Wilcox (Oracle)
This fixes a bug for tail pages. They always have a NULL mapping, so the check would fail and we would never mark the folio as dirty. Ends up growing the kernel by 19 bytes although there will be fewer calls to compound_head() dynamically. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Use a folio in filemap_map_pagesMatthew Wilcox (Oracle)
Saves 61 bytes due to fewer calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Use folios in next_uptodate_pageMatthew Wilcox (Oracle)
This saves 105 bytes of text. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert page_cache_delete_batch to foliosMatthew Wilcox (Oracle)
Saves one call to compound_head() and reduces text size by 15 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_get_pages to use foliosMatthew Wilcox (Oracle)
This saves a few calls to compound_head(), including one in filemap_update_page(). Shrinks the kernel by 78 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Drop the refcount while waiting for page lockMatthew Wilcox (Oracle)
Commit bd8a1f3655a7 ("mm/filemap: support readpage splitting a page") changed the read_iter path to drop the refcount while waiting for the page lock. However, it missed the same pattern in read_mapping_page() and friends. Use the same pattern in do_read_cache_folio() that is used in filemap_update_page(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Add read_cache_folio and read_mapping_folioMatthew Wilcox (Oracle)
Reimplement read_cache_page() as a wrapper around read_cache_folio(). Saves over 400 bytes of text from do_read_cache_folio() which more than makes up for the extra 100 bytes of text added to the various wrapper functions. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_fault to folioMatthew Wilcox (Oracle)
Instead of converting back-and-forth between the actual page and the head page, just convert once at the end of the function where we set the vmf->page. Saves 241 bytes of text, or 15% of the size of filemap_fault(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert do_async_mmap_readahead to take a folioMatthew Wilcox (Oracle)
Call page_cache_async_ra() directly instead of indirecting through page_cache_async_readahead(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04readahead: Convert page_cache_ra_unbounded to foliosMatthew Wilcox (Oracle)
This saves 99 bytes of kernel text. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04readahead: Convert page_cache_async_ra() to take a folioMatthew Wilcox (Oracle)
Using the folio here avoids checking whether it's a tail page. This patch mostly just enables some of the following patches. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_range_uptodate to foliosMatthew Wilcox (Oracle)
The only caller was already passing a head page, so this simply avoids a call to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_create_page to folioMatthew Wilcox (Oracle)
This is all internal to filemap and saves 100 bytes of text. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_read_page to take a folioMatthew Wilcox (Oracle)
One of the callers already had a folio; the other two grow by a few bytes, but filemap_read_page() shrinks by 50 bytes for a net reduction of 27 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert find_get_pages_contig to foliosMatthew Wilcox (Oracle)
None of the callers of find_get_pages_contig() want tail pages. They all use order-0 pages today, but if they were converted, they'd want folios. So just remove the call to find_subpage() instead of replacing it with folio_page(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Convert filemap_get_read_batch to use foliosMatthew Wilcox (Oracle)
The page cache only stores folios, never tail pages. Saves 29 bytes due to removing calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
2022-01-04filemap: Remove thp_contains()Matthew Wilcox (Oracle)
This function is now unused, so delete it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-22 18:46:40 +0000