summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-13tls: zero the crypto information from tls_context before freeingSabrina Dubroca
This contains key material in crypto_send_aes_gcm_128 and crypto_recv_aes_gcm_128. Introduce union tls_crypto_context, and replace the two identical unions directly embedded in struct tls_context with it. We can then use this union to clean up the memory in the new tls_ctx_free() function. Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13tls: don't copy the key out of tls12_crypto_info_aes_gcm_128Sabrina Dubroca
There's no need to copy the key to an on-stack buffer before calling crypto_aead_setkey(). Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13neighbour: confirm neigh entries when ARP packet is receivedVasily Khoruzhick
Update 'confirmed' timestamp when ARP packet is received. It shouldn't affect locktime logic and anyway entry can be confirmed by any higher-layer protocol. Thus it makes sense to confirm it when ARP packet is received. Fixes: 77d7123342dc ("neighbour: update neigh timestamps iff update is effective") Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flagsRoopa Prabhu
This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071 Commit 5025f7f7d506 wrongly relied on __dev_change_flags to notify users of dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED. Fix it by indicating flag changes explicitly to __dev_notify_flags. Fixes: 5025f7f7d506 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link") Reported-By: Liam mcbirnie <liam.mcbirnie@boeing.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRTWilly Tarreau
Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn <jannh@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13hv_netvsc: fix schedule in RCU contextStephen Hemminger
When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13ucma: fix a use-after-free in ucma_resolve_ip()Cong Wang
There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-13pstore: Fix incorrect persistent ram buffer mappingBin Yang
persistent_ram_vmap() returns the page start vaddr. persistent_ram_iomap() supports non-page-aligned mapping. persistent_ram_buffer_map() always adds offset-in-page to the vaddr returned from these two functions, which causes incorrect mapping of non-page-aligned persistent ram buffer. By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which might not be page aligned. If the offset-in-page > 2048, the vaddr will be in next page. If the next page is not mapped, it will cause kernel panic: [ 0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000 ... [ 0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f ... [ 0.075000] Call Trace: [ 0.075000] ramoops_init_przs.part.10.constprop.15+0x105/0x260 [ 0.075000] ramoops_probe+0x232/0x3a0 [ 0.075000] platform_drv_probe+0x3e/0xa0 [ 0.075000] driver_probe_device+0x2cd/0x400 [ 0.075000] __driver_attach+0xe4/0x110 [ 0.075000] ? driver_probe_device+0x400/0x400 [ 0.075000] bus_for_each_dev+0x70/0xa0 [ 0.075000] driver_attach+0x1e/0x20 [ 0.075000] bus_add_driver+0x159/0x230 [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] driver_register+0x70/0xc0 [ 0.075000] ? init_pstore_fs+0x4d/0x4d [ 0.075000] __platform_driver_register+0x36/0x40 [ 0.075000] ramoops_init+0x12f/0x131 [ 0.075000] do_one_initcall+0x4d/0x12c [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] kernel_init_freeable+0x19b/0x222 [ 0.075000] ? rest_init+0xbb/0xbb [ 0.075000] kernel_init+0xe/0xfc [ 0.075000] ret_from_fork+0x3a/0x50 Signed-off-by: Bin Yang <bin.yang@intel.com> [kees: add comments describing the mapping differences, updated commit log] Fixes: 24c3d2f342ed ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2018-09-13net_sched: notify filter deletion when deleting a chainCong Wang
When we delete a chain of filters, we need to notify user-space we are deleting each filters in this chain too. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13ALSA: hda - Enable runtime PM only for discrete GPUTakashi Iwai
The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13xen/netfront: don't bug in case of too many fragsJuergen Gross
Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13ipv6: use rt6_info members when dst is set in rt6_fill_nodeXin Long
In inet6_rtm_getroute, since Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"), it has used rt->from to dump route info instead of rt. However for some route like cache, some of its information like flags or gateway is not the same as that of the 'from' one. It caused 'ip route get' to dump the wrong route information. In Jianlin's testing, the output information even lost the expiration time for a pmtu route cache due to the wrong fib6_flags. So change to use rt6_info members for dst addr, src addr, flags and gateway when it tries to dump a route entry without fibmatch set. v1->v2: - not use rt6i_prefsrc. - also fix the gw dump issue. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for ↵Keerthy
non-am43 SoCs The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-09-13ALSA: oxfw: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: firewire-tascam: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: firewire-digi00x: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13spi: davinci: remove set but not used variable 'pdata'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-davinci.c: In function 'davinci_spi_setup': drivers/spi/spi-davinci.c:422:36: warning: variable 'pdata' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-13pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()Dan Carpenter
Smatch complains about this condition: if (has_config && num_pins >= 1) The "has_config" variable is either uninitialized or true. The "num_pins" variable is unsigned and we verified that it is non-zero on the lines before so we know "num_pines >= 1" is true. Really, we could just check "num_configs" directly and remove the "has_config" variable. Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Implement fast processing path in get/set arrayJanusz Krzysztofik
Certain GPIO descriptor arrays returned by gpio_get_array() may contain information on direct mapping of array members to pins of a single GPIO chip in hardware order. In such cases, bitmaps of values can be passed directly from/to the chip's .get/set_multiple() callbacks without wasting time on iterations. Add respective code to gpiod_get/set_array_bitmap_complex() functions. Pins not applicable for fast path are processed as before, skipping over the 'fast' ones. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Identify arrays matching GPIO hardwareJanusz Krzysztofik
Certain GPIO array lookup results may map directly to GPIO pins of a single GPIO chip in hardware order. If that condition is recognized and handled efficiently, significant performance gain of get/set array functions may be possible. While processing a request for an array of GPIO descriptors, identify those which represent corresponding pins of a single GPIO chip. Skip over pins which require open source or open drain special processing. Moreover, identify pins which require inversion. Pass a pointer to that information with the array to the caller so it can benefit from enhanced performance as soon as get/set array functions can accept and make efficient use of it. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Don't support irq sharing for userspaceUwe Kleine-König
This concerns gpio edge detection for GPIO IRQs used from userspace for GPIO event listeners. Trying to work out the right event if it's not sure that the examined gpio actually moved is impossible. Consider two gpios "gpioA" and "gpioB" that share an interrupt. gpioA's irq should trigger on any edge, gpioB's on a falling edge. If now the common irq fires and both gpio lines are high, there are several possibilities that could have happend: a) gpioA just had a low-to-high edge b) gpioB just had a high-to-low-to-high spike c) a combination of both a) and b) While c) is unlikely (in most setups) a) and b) alone are bad enough. Currently the code assumes case a) unconditionally and doesn't report an event for gpioB. Note that even if there is no irq sharing involved a spike for a gpio might not result in an event if it's configured to trigger for a single edge only. The only way to improve this is to drop support for interrupt sharing. This way a spike results in an event for the right gpio at least. Note that apart from dropping IRQF_SHARED this effectively undoes commit df1e76f28ffe ("gpiolib: skip unwanted events, don't convert them to opposite edge"). This obviously breaks setups that rely on interrupt sharing, but given that this cannot be reliable, this is probably an acceptable trade-off. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [Assuming there are no users of interrupt sharing yet] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpio: uapi: Grammar s/array/array of/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-12Merge tag 'pci-v4.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel Datwyler) - Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto) - Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva) - Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg) - Fix pciehp hot-add/powerfault detection that left indicators in wrong state (Keith Busch) - Fix pci_reset_bus() logic error (Dennis Dalessandro) - Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis Dalessandro) - Allow enabling PASID on Root Complex Integrated Endpoints (Felix Kuehling) * tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix enabling of PASID on RC integrated endpoints IB/hfi1,PCI: Allow bus reset while probing PCI: Fix faulty logic in pci_reset_bus() PCI: pciehp: Fix hot-add vs powerfault detection order switchtec: Fix Spectre v1 vulnerability Revert "PCI: Add ACS quirk for Intel 300 series" MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers
2018-09-12Merge tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI bugfixes from Corey Minyard: "A few fixes that came around or after the merge window, except for commit cd2315d471f4 ("ipmi: kcs_bmc: don't change device name") which is for a driver that very few people use, and those people need the change" * tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi: ipmi: Fix NULL pointer dereference in ssif_probe ipmi: Fix I2C client removal in the SSIF driver ipmi: Move BT capabilities detection to the detect call ipmi: Rework SMI registration failure ipmi: kcs_bmc: don't change device name
2018-09-13crypto: ccp - add timeout support in the SEV commandBrijesh Singh
Currently, the CCP driver assumes that the SEV command issued to the PSP will always return (i.e. it will never hang). But recently, firmware bugs have shown that a command can hang. Since of the SEV commands are used in probe routines, this can cause boot hangs and/or loss of virtualization capabilities. To protect against firmware bugs, add a timeout in the SEV command execution flow. If a command does not complete within the specified timeout then return -ETIMEOUT and stop the driver from executing any further commands since the state of the SEV firmware is unknown. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <Gary.Hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-12Merge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm nouveau fixes from Dave Airlie: "I'm sending this separately as it's a bit larger than I generally like for one driver, but it does contain a bunch of make my nvidia laptop not die (runpm) and a bunch to make my docking station and monitor display stuff (mst) fixes. Lyude has spent a lot of time on these, and we are putting the fixes into distro kernels as well asap, as it helps a bunch of standard Lenovo laptops, so I'm fairly happy things are better than they were before these patches, but I decided to split them out just for clarification" * tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels drm/nouveau/disp: fix DP disable race drm/nouveau/disp: move eDP panel power handling drm/nouveau/disp: remove unused struct member drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer drm/nouveau: fix oops in client init failure path drm/nouveau: Fix nouveau_connector_ddc_detect() drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early drm/nouveau: Reset MST branching unit before enabling drm/nouveau: Only write DP_MSTM_CTRL when needed drm/nouveau: Remove useless poll_enable() call in drm_load() drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state() drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state() drm/nouveau: Fix deadlocks in nouveau_connector_detect() drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend() drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement
2018-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi and Florian Westphal. 2) Memory leak in be2net driver, from Petr Oros. 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem. 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen. 5) tipc_release() needs to orphan the sock, from Cong Wang. 6) Need to program TxConfig register after TX/RX is enabled in r8169 driver, not beforehand, from Maciej S. Szmigiero. 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal. 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo. 9) syzbot can create conditions where kernel log is flooded with synflood warnings due to creation of many listening sockets, fix that. From Willem de Bruijn. 10) Fix RCU issues in rds socket layer, from Cong Wang. 11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) nfp: flower: reject tunnel encap with ipv6 outer headers for offloading nfp: flower: fix vlan match by checking both vlan id and vlan pcp tipc: check return value of __tipc_dump_start() s390/qeth: don't dump past end of unknown HW header s390/qeth: use vzalloc for QUERY OAT buffer s390/qeth: switch on SG by default for IQD devices s390/qeth: indicate error when netdev allocation fails rds: fix two RCU related problems r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED erspan: fix error handling for erspan tunnel erspan: return PACKET_REJECT when the appropriate tunnel is not found tcp: rate limit synflood warnings further MIPS: lantiq: dma: add dev pointer netfilter: xt_hashlimit: use s->file instead of s->private netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT netfilter: conntrack: reset tcp maxwin on re-register qmi_wwan: Support dynamic config on Quectel EP06 ethernet: renesas: convert to SPDX identifiers ...
2018-09-13drm/nouveau/devinit: fix warning when PMU/PRE_OS is missingBen Skeggs
Messed up when sending pull request and sent an outdated version of previous patch, this fixes it up to remove warnings. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-12null_blk: fix zoned support for non-rq based operationJens Axboe
The supported added for zones in null_blk seem to assume that only rq based operation is possible. But this depends on the queue_mode setting, if this is set to 0, then cmd->bio is what we need to be operating on. Right now any attempt to load null_blk with queue_mode=0 will insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to always be set. Make the zoned code deal with bio's instead, or pass in the appropriate sector/nr_sectors instead. Fixes: ca4b2a011948 ("null_blk: add zone support") Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-12cifs: read overflow in is_valid_oplock_break()Dan Carpenter
We need to verify that the "data_offset" is within bounds. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-09-12uaccess: Fix is_source param for check_copy_size() in copy_to_iter_mcsafe()Dave Jiang
copy_to_iter_mcsafe() is passing in the is_source parameter as "false" to check_copy_size(). This is different than what copy_to_iter() does. Also, the addr parameter passed to check_copy_size() is the source so therefore we should be passing in "true" instead. Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Cc: <stable@vger.kernel.org> Reported-by: Fan Du <fan.du@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-09-12bpf: use __GFP_COMP while allocating pageTushar Dave
Helper bpg_msg_pull_data() can allocate multiple pages while linearizing multiple scatterlist elements into one shared page. However, if the shared page has size > PAGE_SIZE, using copy_page_to_iter() causes below warning. e.g. [ 6367.019832] WARNING: CPU: 2 PID: 7410 at lib/iov_iter.c:825 page_copy_sane.part.8+0x0/0x8 To avoid above warning, use __GFP_COMP while allocating multiple contiguous pages. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12RDMA/uverbs: Atomically flush and mark closed the comp event queueSteve Wise
Currently a uverbs completion event queue is flushed of events in ib_uverbs_comp_event_close() with the queue spinlock held and then released. Yet setting ev_queue->is_closed is not set until later in uverbs_hot_unplug_completion_event_file(). In between the time ib_uverbs_comp_event_close() releases the lock and uverbs_hot_unplug_completion_event_file() acquires the lock, a completion event can arrive and be inserted into the event queue by ib_uverbs_comp_handler(). This can cause a "double add" list_add warning or crash depending on the kernel configuration, or a memory leak because the event is never dequeued since the queue is already closed down. So add setting ev_queue->is_closed = 1 to ib_uverbs_comp_event_close(). Cc: stable@vger.kernel.org Fixes: 1e7710f3f656 ("IB/core: Change completion channel to use the reworked objects schema") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-12bpf/verifier: disallow pointer subtractionAlexei Starovoitov
Subtraction of pointers was accidentally allowed for unpriv programs by commit 82abbf8d2fc4. Revert that part of commit. Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers") Reported-by: Jann Horn <jannh@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12Merge branch 'nfp-flower-fixes'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fixes for flower offload Two fixes for flower matching and tunnel encap. Pieter fixes VLAN matching if the entire VLAN id is masked out and match is only performed on the PCP field. Louis adds validation of tunnel flags for encap, most importantly we should not offload actions on IPv6 tunnels if it's not supported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: reject tunnel encap with ipv6 outer headers for offloadingLouis Peens
This fixes a bug where ipv6 tunnels would report that it is getting offloaded to hardware but would actually be rejected by hardware. Fixes: b27d6a95a70d ("nfp: compile flower vxlan tunnel set actions") Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: fix vlan match by checking both vlan id and vlan pcpPieter Jansen van Vuuren
Previously we only checked if the vlan id field is present when trying to match a vlan tag. The vlan id and vlan pcp field should be treated independently. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12tipc: check return value of __tipc_dump_start()Cong Wang
When __tipc_dump_start() fails with running out of memory, we have no reason to continue, especially we should avoid calling tipc_dump_done(). Fixes: 8f5c5fcf3533 ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()") Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12Merge branch 'qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-09-12 please apply the following qeth fixes for -net. Patch 1 resolves a regression in an error path, while patch 2 enables the SG support by default that was newly introduced with 4.19. Patch 3 takes care of a longstanding problem with large-order allocations, and patch 4 fixes a potential out-of-bounds access. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: don't dump past end of unknown HW headerJulian Wiedmann
For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: use vzalloc for QUERY OAT bufferWenjia Zhang
qeth_query_oat_command() currently allocates the kernel buffer for the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with fragmented memory, large allocations may fail (eg. the qethqoat tool by default uses 132KB). Solve this issue by using vzalloc, backing the allocation with non-contiguous memory. Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: switch on SG by default for IQD devicesJulian Wiedmann
Scatter-gather transmit brings a nice performance boost. Considering the rather large MTU sizes at play, it's also totally the Right Thing To Do. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: indicate error when netdev allocation failsJulian Wiedmann
Bailing out on allocation error is nice, but we also need to tell the ccwgroup core that creating the qeth groupdev failed. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12bpf: btf: Fix end boundary calculation for type sectionMartin KaFai Lau
The end boundary math for type section is incorrect in btf_check_all_metas(). It just happens that hdr->type_off is always 0 for now because there are only two sections (type and string) and string section must be at the end (ensured in btf_parse_str_sec). However, type_off may not be 0 if a new section would be added later. This patch fixes it. Fixes: f80442a4cd18 ("bpf: btf: Change how section is supported in btf_header") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3Guenter Roeck
Commit eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") moved loading the fixmap in efi_call_phys_epilog() after load_cr3() since it was assumed to be more logical. Turns out this is incorrect: In efi_call_phys_prolog(), the gdt with its physical address is loaded first, and when the %cr3 is reloaded in _epilog from initial_page_table to swapper_pg_dir again the gdt is no longer mapped. This results in a triple fault if an interrupt occurs after load_cr3() and before load_fixmap_gdt(0). Calling load_fixmap_gdt(0) first restores the execution order prior to commit eeb89e2bb1ac and fixes the problem. Fixes: eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: linux-efi@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1536689892-21538-1-git-send-email-linux@roeck-us.net
2018-09-12x86/pti/64: Remove the SYSCALL64 entry trampolineAndy Lutomirski
The SYSCALL64 trampoline has a couple of nice properties: - The usual sequence of SWAPGS followed by two GS-relative accesses to set up RSP is somewhat slow because the GS-relative accesses need to wait for SWAPGS to finish. The trampoline approach allows RIP-relative accesses to set up RSP, which avoids the stall. - The trampoline avoids any percpu access before CR3 is set up, which means that no percpu memory needs to be mapped in the user page tables. This prevents using Meltdown to read any percpu memory outside the cpu_entry_area and prevents using timing leaks to directly locate the percpu areas. The downsides of using a trampoline may outweigh the upsides, however. It adds an extra non-contiguous I$ cache line to system calls, and it forces an indirect jump to transfer control back to the normal kernel text after CR3 is set up. The latter is because x86 lacks a 64-bit direct jump instruction that could jump from the trampoline to the entry text. With retpolines enabled, the indirect jump is extremely slow. Change the code to map the percpu TSS into the user page tables to allow the non-trampoline SYSCALL64 path to work under PTI. This does not add a new direct information leak, since the TSS is readable by Meltdown from the cpu_entry_area alias regardless. It does allow a timing attack to locate the percpu area, but KASLR is more or less a lost cause against local attack on CPUs vulnerable to Meltdown regardless. As far as I'm concerned, on current hardware, KASLR is only useful to mitigate remote attacks that try to attack the kernel without first gaining RCE against a vulnerable user process. On Skylake, with CONFIG_RETPOLINE=y and KPTI on, this reduces syscall overhead from ~237ns to ~228ns. There is a possible alternative approach: Move the trampoline within 2G of the entry text and make a separate copy for each CPU. This would allow a direct jump to rejoin the normal entry path. There are pro's and con's for this approach: + It avoids a pipeline stall - It executes from an extra page and read from another extra page during the syscall. The latter is because it needs to use a relative addressing mode to find sp1 -- it's the same *cacheline*, but accessed using an alias, so it's an extra TLB entry. - Slightly more memory. This would be one page per CPU for a simple implementation and 64-ish bytes per CPU or one page per node for a more complex implementation. - More code complexity. The current approach is chosen for simplicity and because the alternative does not provide a significant benefit, which makes it worth. [ tglx: Added the alternative discussion to the changelog ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/8c7c6e483612c3e4e10ca89495dc160b1aa66878.1536015544.git.luto@kernel.org
2018-09-12perf/x86/intel/pt: Annotate 'pt_cap_group' with __ro_after_initZubin Mithra
'pt_cap_group' is written to in pt_pmu_hw_init() and not modified after. This makes it a suitable candidate for annotating as __ro_after_init. Signed-off-by: Zubin Mithra <zsm@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20180912164510.23444-1-zsm@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-12x86/xen: Disable CPU0 hotplug for Xen PVJuergen Gross
Xen PV guests don't allow CPU0 hotplug, so disable it. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20180912174122.24282-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 12:17:26 +0000