| Age | Commit message (Collapse) | Author |
|---|
|
In psz_init_zones, if the requested area has a total_size less than
record_size, kcalloc will be called with c == 0 and will return
ZERO_SIZE_PTR.
Further, this will lead to an oops.
With this patch, in this scenario, it will look like this :
[ 6.865545] pstore_zone: total size : 28672 Bytes
[ 6.865547] pstore_zone: kmsg size : 65536 Bytes
[ 6.865549] pstore_zone: pmsg size : 0 Bytes
[ 6.865551] pstore_zone: console size : 0 Bytes
[ 6.865553] pstore_zone: ftrace size : 0 Bytes
[ 6.872095] pstore_zone: zone dmesg total_size too small
[ 6.878234] pstore_zone: alloc zones failed
Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://lore.kernel.org/r/20250110125714.2594719-1-eugen.hristev@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long);
Fixes: c995ee28d29d ("binfmt_flat: prevent kernel dammage from corrupted executable headers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/5be17f6c-5338-43be-91ef-650153b975cb@stanley.mountain
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for !REGULATOR and !OF configurations, adding
missing stubs"
* tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR
regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There's one small fix for real HW - gpio-loongson.
The rest concern two virtual testing drivers in which some issues were
recently found and addressed:
- fix resource leaks in error path in gpio-virtuser (and one
consistent memory leak triggered on every device removal))
- fix the use-case of having multiple con_ids in a lookup table in
gpio-virtuser which has never worked (despite being advertised)
- don't allow rmdir() on configfs directories when they are in use in
gpio-sim and gpio-virtuser
- fix register offsets in gpio-loongson-64"
* tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset
gpio: sim: lock up configfs that an instantiated device depends on
gpio: virtuser: lock up configfs that an instantiated device depends on
gpio: virtuser: fix handling of multiple conn_ids in lookup table
gpio: virtuser: fix missing lookup table cleanups
|
|
In the SPI-NAND layer, we currently make list of operation variants from
the fastest one to the slowest and there is a bit of logic in the core
to go over them and pick the first one that is supported by the
controller, ie. the fastest one among the supported ops.
This kind of logic only works if all operations run at the same
frequency, but as soon as we introduce per operation max frequencies it
is not longer as obvious which operation will be faster, especially
since it also depends on the PCB/controller frequency limitation.
One way to make this choice more clever is to go over all the
variants and for each of them derive an indicator which will help derive
the theoretical best. In this case, we derive a theoretical duration for
the entire operation and we take the smallest one.
Add a helper that parses the spi-mem operation and returns this value.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250110-winbond-6-11-rc1-quad-support-v3-20-7ab4bd56cf6e@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit "HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys"
introduced an issue where the CI failed with the following error:
ERROR: modpost: "platform_profile_cycle" [drivers/hid/hid-lenovo.ko] undefined!
This issue occurs because platform_profile_cycle is used without ensuring
the kernel is configured with CONFIG_ACPI_PLATFORM_PROFILE.
To address this, this patch adds conditional support for platform profile
management to the Fn+F8 key handling.
The functionality for platform_profile_cycle is now included only when
CONFIG_ACPI_PLATFORM_PROFILE is enabled in the kernel configuration.
This ensures compatibility with kernels that do not include the ACPI
platform profile feature, resolving the CI build issue.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Vishnu Sankar <vsankar@lenovo.com>
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Suggested-by: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:
Here is a (big) series supposed to bring DTR support in SPI-NAND.
|
|
nvme multipath reports that they see spurious -EAGAIN bubbling back to
userspace, which is caused by how they handle retries internally through
a kworker. However, any data that needs preserving or importing for
a read/write request has always been done so at prep time, and we can
sanely skip this check.
Reported-by: "Haeuptle, Michael" <michael.haeuptle@hpe.com>
Link: https://lore.kernel.org/io-uring/DS7PR84MB31105C2C63CFA47BE8CBD6EE95102@DS7PR84MB3110.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than try and have io_read/io_write turn REQ_F_REISSUE into
-EAGAIN, catch the REQ_F_REISSUE when the request is otherwise
considered as done. This is saner as we know this isn't happening
during an actual submission, and it removes the need to randomly
check REQ_F_REISSUE after read/write submission.
If REQ_F_REISSUE is set, __io_submit_flush_completions() will skip over
this request in terms of posting a CQE, and the regular request
cleaning will ensure that it gets reissued via io-wq.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cleanup should always have the uring lock held, it's safe to recycle
from here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document the flag along with PMU events to hint what it's used for and
give an example with other useful options to get minimal output.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all
SPE data to be discarded rather than written to memory. Add a format
bit for this mode.
If the mode isn't supported, the format bit isn't published and attempts
to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still
allowed even though it won't be written to so that old tools continue to
work, but updated tools can choose to skip this step.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewd-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250108142904.401139-2-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it
to have a single source of truth about using direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a part of __loop_update_dio in preparation for further
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal)
Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store")
Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
De-duplicate the code for updating queue limits by adding a store_limit
method that allows having common code handle the actual queue limits
update.
Note that this is a pure refactoring patch and does not address the
existing freeze vs limits lock order problem in the refactored code,
which will be addressed next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When __blk_mq_update_nr_hw_queues changes the number of tag sets, it
might have to disable poll queues. Currently it does so by adjusting
the BLK_FEAT_POLL, which is a bit against the intent of features that
describe hardware / driver capabilities, but more importantly causes
nasty lock order problems with the broadly held freeze when updating the
number of hardware queues and the limits lock. Fix this by leaving
BLK_FEAT_POLL alone, and instead check for the number of poll queues in
the bio submission and poll handlers. While this adds extra work to the
fast path, the variables are in cache lines used by these operations
anyway, so it should be cheap enough.
Fixes: 8023e144f9d6 ("block: move the poll flag to queue_limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Otherwise feature reconfiguration can race with I/O submission.
Also drop the bio_clear_polled in the error path, as the flag does not
matter for instant error completions, it is a left over from when we
allowed polled I/O to proceed unpolled in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update is the function that needs to operate on a
frozen queue, not queue_limits_start_update. Update the kerneldoc
comments to reflect that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc7
Here are some new modem and cp210x device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
|
|
David Howells <dhowells@redhat.com> says:
Here are some patches to make a number of improvements to the AFS dynamic
root:
(1) Create an /afs/.<cell> mountpoint to match the /afs/<cell> mountpoint
when a cell is created.
(2) Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking.
(3) Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current cell
name and also provide a /afs/.@cell symlink to point to the dotted
cell mountpoint.
* patches from https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com:
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
Link: https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make /afs/@cell a symlink in the /afs dynamic root to match what other AFS
clients do rather than doing a substitution in the dentry name. This has
the bonus of being tab-expandable also.
Further, provide a /afs/.@cell symlink to point to the dotted cell share.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-4-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some checks for the validity of the cell name. It's may get put into a
symlink, so preclude it containing any slashes or "..". Also disallow
starting/ending with a dot. This makes /afs/@cell/ as a symlink less of a
security risk.
Also disallow multiple setting of /proc/net/afs/rootcell for any given
network namespace. Once set, the value may not be changed. This makes it
easier to only create /afs/@cell and /afs/.@cell if there's a rootcell.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-3-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When a cell is instantiated, automatically create an /afs/.<cell>
mountpoint to match the /afs/<cell> mountpoint to match other AFS clients.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-2-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
drivers/perf/ contains drivers for the perf subsystem, so it makes sense
that the perf list, linux-perf-users@vger.kernel.org, should be
included for perf drivers.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109152811.3402943-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The header asm/unistd_compat_32.h is included whether CONFIG_COMPAT is
defined or not.
Include it only once and remove the following make includecheck warning:
asm/unistd_compat_32.h is included more than once
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250109104636.124507-2-thorsten.blum@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Map the generic perf events for branch prediction stats to the
corresponding hardware events.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20241217212048.3709204-4-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate changes for 6.14 from Mario Limonciello:
"Fix a regression with preferred core rankings not being used.
Fix a precision issue with frequency calculation."
* tag 'amd-pstate-v6.14-2025-01-07' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
|
|
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'
Add the missing 'Return:' tags to the kernel-doc of these functions.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
|
|
THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
|
|
The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
|
|
The intention here is not clear but as this was already tested and matches
vendor driver it's better not to change behavior even if it looks suspicious.
So just remove the unused values.
Coverity-ID: 1525307
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
[kvalo@kernel.org: write commit message]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
|
|
Instead of having a series of function pointers that gets assigned to the
Elf64 or Elf32 versions, put them all into a single structure and use
that. Add the helper function that chooses the structure into the macros
that build the different versions of the elf functions.
Link: https://lore.kernel.org/all/CAHk-=wiafEyX7UgOeZgvd6fvuByE5WXUPh9599kwOc_d-pdeug@mail.gmail.com/
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20250110075459.13d4b94c@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac]
Signed-off-by: Stefan Dösinger <stefan@codeweavers.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
|
|
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
|
|
There is a specific error path in probe functions in wilc drivers (both
sdio and spi) which can lead to kernel panic, as this one for example
when using SPI:
Unable to handle kernel paging request at virtual address 9f000000 when read
[9f000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22
Hardware name: Atmel SAMA5
PC is at wiphy_unregister+0x244/0xc40 [cfg80211]
LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]
[...]
wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]
wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]
wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4
spi_probe from really_probe+0x270/0xb2c
really_probe from __driver_probe_device+0x1dc/0x4e8
__driver_probe_device from driver_probe_device+0x5c/0x140
driver_probe_device from __driver_attach+0x220/0x540
__driver_attach from bus_for_each_dev+0x13c/0x1a8
bus_for_each_dev from bus_add_driver+0x2a0/0x6a4
bus_add_driver from driver_register+0x27c/0x51c
driver_register from do_one_initcall+0xf8/0x564
do_one_initcall from do_init_module+0x2e4/0x82c
do_init_module from load_module+0x59a0/0x70c4
load_module from init_module_from_file+0x100/0x148
init_module_from_file from sys_finit_module+0x2fc/0x924
sys_finit_module from ret_fast_syscall+0x0/0x1c
The issue can easily be reproduced, for example by not wiring correctly
a wilc device through SPI (and so, make it unresponsive to early SPI
commands). It is due to a recent change decoupling wiphy allocation from
wiphy registration, however wilc_netdev_cleanup has not been updated
accordingly, letting it possibly call wiphy unregister on a wiphy which
has never been registered.
Fix this crash by moving wiphy_unregister/wiphy_free out of
wilc_netdev_cleanup, and by adjusting error paths in both drivers
Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
|
