| Age | Commit message (Collapse) | Author |
|---|
|
Before commit:
f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
the frozen task stat was reported as 'D' in cgroup v1.
However, after rewriting the core freezer logic, the frozen task stat is
reported as 'R'. This is confusing, especially when a task with stat of
'S' is frozen.
This bug can be reproduced with these steps:
$ cd /sys/fs/cgroup/freezer/
$ mkdir test
$ sleep 1000 &
[1] 739 // task whose stat is 'S'
$ echo 739 > test/cgroup.procs
$ echo FROZEN > test/freezer.state
$ ps -aux | grep 739
root 739 0.1 0.0 8376 1812 pts/0 R 10:56 0:00 sleep 1000
As shown above, a task whose stat is 'S' was changed to 'R' when it was
frozen.
To solve this regression, simply maintain the same reported state as
before the rewrite.
[ mingo: Enhanced the changelog and comments ]
Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20241217004818.3200515-1-chenridong@huaweicloud.com
|
|
Fix the following objtool warning during build time:
fs/bcachefs/btree_trans_commit.o: warning: objtool: bch2_trans_commit_write_locked.isra.0() falls through to next function do_bch2_trans_commit.isra.0()
fs/bcachefs/btree_trans_commit.o: warning: objtool: .text: unexpected end of section
......
fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function flush_new_cached_update()
fs/bcachefs/btree_update.o: warning: objtool: flush_new_cached_update() falls through to next function bch2_trans_update_by_path()
bch2_trans_unlocked_error() is an Obviously Correct (tm) panic() wrapper,
add it to the list of known noreturns.
[ mingo: Improved the changelog ]
Fixes: fd104e2967b7 ("bcachefs: bch2_trans_verify_not_unlocked()")
Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20241220074847.3418134-1-ccc194101@163.com
|
|
Initialize meter_urb array before use in mixer_us16x08.c.
CID 1410197: (#1 of 1): Uninitialized scalar variable (UNINIT)
uninit_use_in_call: Using uninitialized value *meter_urb when
calling get_meter_levels_from_urb.
Coverity Link:
https://scan7.scan.coverity.com/#/project-view/52849/11354?selectedIssue=1410197
Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Link: https://patch.msgid.link/20241229060240.1642-1-tanyaagarwal25699@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The io-wq path can downgrade a multishot request to oneshot mode,
however io_read_mshot() doesn't handle that and would still post
multiple CQEs. That's not allowed, because io_req_post_cqe() requires
stricter context requirements.
The described can only happen with pollable files that don't support
FMODE_NOWAIT, which is an odd combination, so if even allowed it should
be fairly rare.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: bee1d5becdf5b ("io_uring: disable io-wq execution of multishot NOWAIT requests")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c5c8c4a50a882fd581257b81bf52eee260ac29fd.1735407848.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for ublk setup error handling"
* tag 'block-6.13-20241228' of git://git.kernel.dk/linux:
ublk: detach gendisk from ublk device if add_disk() fails
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix for a theoretical issue with SQPOLL setup"
* tag 'io_uring-6.13-20241228' of git://git.kernel.dk/linux:
io_uring/sqpoll: fix sqpoll error handling races
|
|
Pull smb client fixes from Steve French:
- fix caching of files that will be reused for write
- minor cleanup
* tag '6.13-rc4-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove unused is_server_using_iface()
smb: enable reuse of deferred file handles for write operations
|
|
With the latest binutils, modpost fails with a bus error on some
architectures such as ARM and sparc64.
Since binutils commit 1f1b5e506bf0 ("bfd/ELF: restrict file alignment
for object files"), the byte offset to each section (sh_offset) in
relocatable ELF is no longer guaranteed to be aligned.
modpost parses MODULE_DEVICE_TABLE() data structures, which are usually
located in the .rodata section. If it is not properly aligned, unaligned
access errors may occur.
To address the issue, this commit imports the get_unaligned() helper
from include/linux/unaligned.h.
The get_unaligned_native() helper caters to the endianness in addition
to handling the unaligned access.
I slightly refactored do_pcmcia_entry() and do_input() to avoid writing
back to an unaligned address. (We would need the put_unaligned() helper
to do that.)
The addend_*_rel() functions need similar adjustments because the .text
sections are not aligned either.
It seems that the .symtab, .rel.* and .rela.* sections are still aligned.
Keep normal pointer access for these sections to avoid unnecessary
performance costs.
Reported-by: Paulo Pisati <paolo.pisati@canonical.com>
Reported-by: Matthias Klose <doko@debian.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=32435
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=32493
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Optimize the size of guid_name[], as it only requires 1 additional byte
for '\0' instead of 2.
Simplify the loop by incrementing the iterator by 1 instead of 2.
Remove the unnecessary TO_NATIVE() call, as the guid is represented as
a byte stream.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
This loop should iterate over the range from 'min' to 'max' inclusively.
The last interation is missed.
Fixes: 1d8f430c15b3 ("[PATCH] Input: add modalias support")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Commit b18b047002b7 ("kbuild: change scripts/mksysmap into sed script")
changed the invocation of the script, to call sed directly without
shell.
That means, the current extra escape that was added in:
commit ec336aa83162 ("scripts/mksysmap: Fix badly escaped '$'")
for the shell is not correct any more, at the moment the stack traces
for nvhe are corrupted:
[ 22.840904] kvm [190]: [<ffff80008116dd54>] __kvm_nvhe_$x.220+0x58/0x9c
[ 22.842913] kvm [190]: [<ffff8000811709bc>] __kvm_nvhe_$x.9+0x44/0x50
[ 22.844112] kvm [190]: [<ffff80008116f8fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
With this patch:
[ 25.793513] kvm [192]: nVHE call trace:
[ 25.794141] kvm [192]: [<ffff80008116dd54>] __kvm_nvhe_hyp_panic+0xb0/0xf4
[ 25.796590] kvm [192]: [<ffff8000811709bc>] __kvm_nvhe_handle_trap+0xe4/0x188
[ 25.797553] kvm [192]: [<ffff80008116f8fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
Fixes: b18b047002b7 ("kbuild: change scripts/mksysmap into sed script")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool fix from Steven Rostedt:
- Fix rtla divide by zero when the count is zero in histograms
* tag 'trace-tools-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Fix histogram ALL for zero samples
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.13-rc5
- IMX: fixed stop condition in single master mode and added
compatible string for errata adherence.
- Microchip: Added support for proper repeated sends and fixed
unnecessary NAKs on empty messages, which caused false bus
detection.
|
|
Now when destroying the IO queue we call nvme_tcp_stop_io_queues()
twice, nvme_tcp_destroy_io_queues() has an unnecessary call. Here we
try to remove nvme_tcp_destroy_io_queues() and merge it into
nvme_tcp_teardown_io_queues(), simplify the code and align with
nvme-rdma, make it easy to maintaince.
Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Using mutex lock in IO hot path causes the kernel BUG sleeping while
atomic. Shinichiro[1], first encountered this issue while running blktest
nvme/052 shown below:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 996, name: (udev-worker)
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by (udev-worker)/996:
#0: ffff8881004570c8 (mapping.invalidate_lock){.+.+}-{3:3}, at: page_cache_ra_unbounded+0x155/0x5c0
#1: ffffffff8607eaa0 (rcu_read_lock){....}-{1:2}, at: blk_mq_flush_plug_list+0xa75/0x1950
CPU: 2 UID: 0 PID: 996 Comm: (udev-worker) Not tainted 6.12.0-rc3+ #339
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x90
__might_resched.cold+0x1f7/0x23d
? __pfx___might_resched+0x10/0x10
? vsnprintf+0xdeb/0x18f0
__mutex_lock+0xf4/0x1220
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_vsnprintf+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
? snprintf+0xa5/0xe0
? xas_load+0x1ce/0x3f0
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_nvmet_subsys_nsid_exists+0x10/0x10 [nvmet]
nvmet_req_find_ns+0x24e/0x300 [nvmet]
nvmet_req_init+0x694/0xd40 [nvmet]
? blk_mq_start_request+0x11c/0x750
? nvme_setup_cmd+0x369/0x990 [nvme_core]
nvme_loop_queue_rq+0x2a7/0x7a0 [nvme_loop]
? __pfx___lock_acquire+0x10/0x10
? __pfx_nvme_loop_queue_rq+0x10/0x10 [nvme_loop]
__blk_mq_issue_directly+0xe2/0x1d0
? __pfx___blk_mq_issue_directly+0x10/0x10
? blk_mq_request_issue_directly+0xc2/0x140
blk_mq_plug_issue_direct+0x13f/0x630
? lock_acquire+0x2d/0xc0
? blk_mq_flush_plug_list+0xa75/0x1950
blk_mq_flush_plug_list+0xa9d/0x1950
? __pfx_blk_mq_flush_plug_list+0x10/0x10
? __pfx_mpage_readahead+0x10/0x10
__blk_flush_plug+0x278/0x4d0
? __pfx___blk_flush_plug+0x10/0x10
? lock_release+0x460/0x7a0
blk_finish_plug+0x4e/0x90
read_pages+0x51b/0xbc0
? __pfx_read_pages+0x10/0x10
? lock_release+0x460/0x7a0
page_cache_ra_unbounded+0x326/0x5c0
force_page_cache_ra+0x1ea/0x2f0
filemap_get_pages+0x59e/0x17b0
? __pfx_filemap_get_pages+0x10/0x10
? lock_is_held_type+0xd5/0x130
? __pfx___might_resched+0x10/0x10
? find_held_lock+0x2d/0x110
filemap_read+0x317/0xb70
? up_write+0x1ba/0x510
? __pfx_filemap_read+0x10/0x10
? inode_security+0x54/0xf0
? selinux_file_permission+0x36d/0x420
blkdev_read_iter+0x143/0x3b0
vfs_read+0x6ac/0xa20
? __pfx_vfs_read+0x10/0x10
? __pfx_vm_mmap_pgoff+0x10/0x10
? __pfx___seccomp_filter+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f565bd1ce11
Code: 00 48 8b 15 09 90 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 d0 ad 01 00 f3 0f 1e fa 80 3d 35 12 0e 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffd6e7a20c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007f565bd1ce11
RDX: 0000000000001000 RSI: 00007f565babb000 RDI: 0000000000000014
RBP: 00007ffd6e7a2130 R08: 00000000ffffffff R09: 0000000000000000
R10: 0000556000bfa610 R11: 0000000000000246 R12: 000000003ffff000
R13: 0000556000bfa5b0 R14: 0000000000000e00 R15: 0000556000c07328
</TASK>
Apparently, the above issue is caused due to using mutex lock while
we're in IO hot path. It's a regression caused with commit 505363957fad
("nvmet: fix nvme status code when namespace is disabled"). The mutex
->su_mutex is used to find whether a disabled nsid exists in the config
group or not. This is to differentiate between a nsid that is disabled
vs non-existent.
To mitigate the above issue, we've worked upon a fix[2] where we now
insert nsid in subsys Xarray as soon as it's created under config group
and later when that nsid is enabled, we add an Xarray mark on it and set
ns->enabled to true. The Xarray mark is useful while we need to loop
through all enabled namepsaces under a subsystem using xa_for_each_marked()
API. If later a nsid is disabled then we clear Xarray mark from it and also
set ns->enabled to false. It's only when nsid is deleted from the config
group we delete it from the Xarray.
So with this change, now we could easily differentiate a nsid is disabled
(i.e. Xarray entry for ns exists but ns->enabled is set to false) vs non-
existent (i.e.Xarray entry for ns doesn't exist).
Link: https://lore.kernel.org/linux-nvme/20241022070252.GA11389@lst.de/ [2]
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-nvme/tqcy3sveity7p56v7ywp7ssyviwcb3w4623cnxj3knoobfcanq@yxgt2mjkbkam/ [1]
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Fix-suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed
size buffer, even though it is dynamically allocated to the size of the
string.
Create a new string with kstrndup instead of using the old buffer.
Reported-by: syzbot+ff4aab278fa7e27e0f9e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff4aab278fa7e27e0f9e
Fixes: 95409e277d83 ("nvmet: implement unique discovery NQN")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix for net:
1) Fix unaligned atomic read on struct nft_set_ext in nft_set_hash
backend that causes an alignment failure splat on aarch64. This
is related to a recent fix and it has been reported via the
regressions mailing list.
* tag 'nf-24-12-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
====================
Link: https://patch.msgid.link/20241224233109.361755-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
netlink: specs: mptcp: fixes for some descriptions
When looking at the MPTCP PM Netlink specs rendered version [1], a few
small issues have been found with the descriptions, and fixed here:
- Patch 1: add a missing attribute for two events. For >= v5.19.
- Patch 2: clearly mention the attributes. For >= v6.7.
- Patch 3: fix missing descriptions and replace a wrong one. For >= v6.7.
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html [1]
v1: https://lore.kernel.org/20241219-net-mptcp-netlink-specs-pm-doc-fixes-v1-0-825d3b45f27b@kernel.org
====================
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-0-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two operations didn't have a small description. It looks like something
that has been missed in the original commit introducing this file.
Replace the two "todo" by a small and simple description: Create/Destroy
subflow.
While at it, also uniform the capital letters, avoid double spaces, and
fix the "announce" event description: a new "address" has been
announced, not a new "subflow".
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-3-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html#event-type [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-2-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute is added with the 'created' and 'established' events, but
the documentation didn't mention it.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-1-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- fix potential array out of bounds access in gpio-charger
- cros_charge-control:
- fix concurrent sysfs access
- allow start_threshold == end_threshold
- workaround limited v2 charge threshold API
- bq24296: fix vbus regulator handling
* tag 'for-v6.13-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq24190: Fix BQ24296 Vbus regulator support
power: supply: cros_charge-control: hide start threshold on v2 cmd
power: supply: cros_charge-control: allow start_threshold == end_threshold
power: supply: cros_charge-control: add mutex for driver data
power: supply: gpio-charger: Fix set charge current limits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- Add close() callback in vas_vm_ops struct for proper cleanup
Thanks to Haren Myneni.
* tag 'powerpc-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Change the priority of the module callback of kprobe events so that it
is called after the jump label list on the module is updated.
This ensures the kprobe can check whether it is not on the jump label
address correctly"
* tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobe: Make trace_kprobe's module callback called after jump_label update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- stddef: make __struct_group() UAPI C++-friendly (Alexander Lobakin)
* tag 'hardening-v6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
stddef: make __struct_group() UAPI C++-friendly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor tracing fixes:
- Add "const" to "char *" in event structure field that gets assigned
literals.
- Check size of input passed into the tracing cpumask file.
If a too large of an input gets passed into the cpumask file, it
could trigger a warning in the bitmask parsing code"
* tag 'trace-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Prevent bad count for tracing_cpumask_write
tracing: Constify string literal data member in struct trace_event_call
|
|
A previous commit mistakenly moved the clearing of the in-progress byte
count into the section that's dependent on having a cached iovec or not,
but it should be cleared for any IO. If not, then extra bytes may be
added at IO completion time, causing potentially weird behavior like
over-reporting the amount of IO done.
Fixes: d7f11616edf5 ("io_uring/rw: Allocate async data through helper")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412271132.a09c3500-lkp@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's a pointer, don't use 0 for that. sparse throws a warning for that,
as the kernel test robot noticed.
Fixes: d7f11616edf5 ("io_uring/rw: Allocate async data through helper")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412180253.YML3qN4d-lkp@intel.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit changed overwriting kiocb->ki_flags with
->f_iocb_flags with masking it in. This breaks for retry situations,
where we don't necessarily want to retain previously set flags, like
IOCB_NOWAIT.
The use case needs IOCB_HAS_METADATA to be persistent, but the change
makes all flags persistent, which is an issue. Add a request flag to
track whether the request has metadata or not, as that is persistent
across issues.
Fixes: 59a7d12a7fb5 ("io_uring: introduce attributes for read/write and PI support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kfree can handle slab objects nowadays. Drop the extra callback and just
use kfree.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-10-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are two remaining uses of the old async data allocator that do not
rely on the alloc cache. I don't want to make them use the new
allocator helper because that would require a if(cache) check, which
will result in dead code for the cached case (for callers passing a
cache, gcc can't prove the cache isn't NULL, and will therefore preserve
the check. Since this is an inline function and just a few lines long,
keep a second helper to deal with cases where we don't have an async
data cache.
No functional change intended here. This is just moving the helper
around and making it inline.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-9-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This abstract away the cache details.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-8-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This abstracts away the cache details.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-7-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This abstracts away the cache details and simplify the code.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-6-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This abstracts away the cache details to simplify the code.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-5-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of open-coding the allocation, use the generic alloc_cache
helper.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helper replaces io_alloc_async_data by using the folded allocation.
Do it in a header to allow the compiler to decide whether to inline.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
subordinate GDSCs
The Titan TOP GDSC is the parent GDSC for all other GDSCs in the CAMCC
block. None of the subordinate blocks will switch on without the parent
GDSC switched on.
Fixes: 76126a5129b5 ("clk: qcom: Add camcc clock driver for x1e80100")
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-12-16-titan-top-gdsc-v1-1-c96ef62fc307@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
rtla timerlat hist currently computers the minimum, maximum and average
latency even in cases when there are zero samples. This leads to
nonsensical values being calculated for maximum and minimum, and to
divide by zero for average.
A similar bug is fixed by 01b05fc0e5f3 ("rtla/timerlat: Fix histogram
report when a cpu count is 0") but the bug still remains for printing
the sum over all CPUs in timerlat_print_stats_all.
The issue can be reproduced with this command:
$ rtla timerlat hist -U -d 1s
Index
over:
count:
min:
avg:
max:
Floating point exception (core dumped)
(There are always no samples with -U unless the user workload is
created.)
Fix the bug by omitting max/min/avg when sample count is zero,
displaying a dash instead, just like we already do for the individual
CPUs. The logic is moved into a new function called
format_summary_value, which is used for both the individual CPUs
and for the overall summary.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20241127134130.51171-1-tglozar@redhat.com
Fixes: 1462501c7a8 ("rtla/timerlat: Add a summary for hist mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
"cpupower: Add support for showing energy performance preference" added
two new functions to cpufreq.h. This patch adds them to the bindings.
Link: https://lore.kernel.org/linux-pm/8dc731c3-6586-4265-ae6a-d93ed219a963@linuxfoundation.org/T/#t
Tested by compiling both libcpupower and the headers; running the test
script that does not use the functions as a basic sanity test.
Link: https://lore.kernel.org/r/20241224062329.39606-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.
[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest
Fixes: fb038ce4db55 ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable@vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Like all other non-ancient Qualcomm clock drivers, QCOM_GDSC is
required, as the GCC driver defines and instantiates a bunch of GDSCs.
Add the missing dependency.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Closes: https://lore.kernel.org/linux-arm-msm/ab85f2ae-6c97-4fbb-a15b-31cc9e1f77fc@linaro.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241026-topic-8150gcc_kconfig-v1-1-3772013d8804@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized (the latter is implicitly) with zero values, the output
rate of the PLL will be the same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
the alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
No functional changes intended, compile tested only.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-5-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized (the latter is implicitly) with zero values, the output
rate of the PLL will be the same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
the alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
No functional changes intended, compile tested only.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-4-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized with zero values, the output rate of the PLL will be the
same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
While at it, also add a comment to indicate the frequency the PLL runs
at with the current configuration.
No functional changes, the PLL runs at 1.2 GHz both before and after
the change.
Tested on Xiaomi Mi Router AX1800 (IPQ6018, out-of-tree board).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-3-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration,
those will be initialized with zero values implicitly. By using zero
alpha values, the output rate of the PLL will be the same whether
alpha mode is enabled or not.
Remove the superfluous initialization of the 'alpha_en_mask' member
to make it clear that enabling alpha mode is not required to get the
desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the
clk_alpha_pll_stromer_plus_set_rate() function will get reset the
ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask'
is safe.
While at it, also add a comment to indicate the frequency the PLL
runs at with the current configuration.
No functional changes, the initial rate of the PLL is the same both
before and after the patch.
Tested on Xiaomi Router BE3600 2.5G (IPQ5312, out-of-tree board).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-2-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration,
those will be initialized with zero values implicitly. By using zero
alpha values, the output rate of the PLL will be the same whether
alpha mode is enabled or not.
Remove the superfluous initialization of the 'alpha_en_mask' member
to make it clear that enabling alpha mode is not required to get the
desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the
clk_alpha_pll_stromer_set_rate() function will get reset the
ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask'
is safe.
No functional changes, the initial rate of the PLL is the same both
before and after the patch.
Tested on TP-Link Archer AX55 v1 (IPQ5018).
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-1-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
