| Age | Commit message (Collapse) | Author |
|---|
|
Since the dynamic preemption has been enabled for PREEMPT_RT we have now
CONFIG_PREEMPT and CONFIG_PREEMPT_RT set simultaneously. This affects
the vermagic strings which comes now PREEMPT with PREEMPT_RT enabled.
The PREEMPT_RT module usually can not be loaded on a PREEMPT kernel
because some symbols are missing.
However if the symbols are fine then it continues and it crashes later.
The problem is that the struct module has a different layout and the
num_exentries or init members are at a different position leading to a
crash later on. This is not necessary caught by the size check in
elf_validity_cache_index_mod() because the mem member has an alignment
requirement of __module_memory_align which is big enough keep the total
size unchanged. Therefore we should keep the string accurate instead of
removing it.
Move the PREEMPT_RT check before the PREEMPT so that it takes precedence
if both symbols are enabled.
Fixes: 35772d627b55c ("sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241205160602.3lIAsJRT@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
The USB driver uses four USB Request Blocks for RX. Before submitting
one, it allocates a 32768 byte skb for the RX data. This allocation can
fail, maybe due to temporary memory fragmentation. When the allocation
fails, the corresponding URB is never submitted again. After four such
allocation failures, all RX stops because the driver is not requesting
data from the device anymore.
Don't allocate a 32768 byte skb when submitting a USB Request Block
(which happens very often). Instead preallocate 8 such skbs, and reuse
them over and over. If all 8 are busy, allocate a new one. This is
pretty rare. If the allocation fails, use a work to try again later.
When there are enough free skbs again, free the excess skbs.
Also, use WQ_BH for the RX workqueue. With a normal or high priority
workqueue the skbs are processed too slowly when the system is even a
little busy, like when opening a new page in a browser, and the driver
runs out of free skbs and allocates a lot of new ones.
This is more or less what the out-of-tree Realtek drivers do, except
they use a tasklet instead of a BH workqueue.
Tested with RTL8723DU, RTL8821AU, RTL8812AU, RTL8812BU, RTL8822CU,
RTL8811CU.
Closes: https://lore.kernel.org/linux-wireless/6e7ecb47-7ea0-433a-a19f-05f88a2edf6b@gmail.com/
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/9cee7a34-c38d-4128-824d-0ec139ca5a4e@gmail.com
|
|
The firmware message C2H_ADAPTIVITY is currently handled in
rtw_fw_c2h_cmd_rx_irqsafe(), which runs in the RX workqueue, but it's
not "irqsafe" with USB because it sleeps (reads hardware registers).
This becomes a problem after the next patch, which will create the RX
workqueue with the flag WQ_BH.
To avoid sleeping when it's not allowed, handle C2H_ADAPTIVITY in
rtw_fw_c2h_cmd_handle(), which runs in the c2h workqueue.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/96e52b03-be8d-4050-ae71-bfdb478ff42f@gmail.com
|
|
"iperf3 -c 192.168.0.1 -R --udp -b 0" shows about 40% of datagrams
are lost. Many torrents don't download faster than 3 MiB/s, probably
because the Bittorrent protocol uses UDP. This is somehow related to
the use of skb_clone() in the RX path.
Don't use skb_clone(). Instead allocate a new skb for each 802.11 frame
received and copy the data from the big (32768 byte) skb.
With this patch, "iperf3 -c 192.168.0.1 -R --udp -b 0" shows only 1-2%
of datagrams are lost, and torrents can reach download speeds of 36
MiB/s.
Tested with RTL8812AU and RTL8822CU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8c9d4f9d-ebd8-4dc0-a0c4-9ebe430521dd@gmail.com
|
|
Some RTL8812AU devices fail to probe:
[ 12.478774] rtw_8812au 1-1.3:1.0: failed to dump efuse logical map
[ 12.487712] rtw_8812au 1-1.3:1.0: failed to setup chip efuse info
[ 12.487742] rtw_8812au 1-1.3:1.0: failed to setup chip information
[ 12.491077] rtw_8812au: probe of 1-1.3:1.0 failed with error -22
It turns out these chips don't need to "protect" any bytes at the end of
the efuse.
The original value of 96 was copied from rtw8821c.c.
No one reported any failures with RTL8821AU yet, but the vendor driver
uses the same efuse reading code for both chips.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1a477adb-60c3-463c-b158-3f86c94cb821@gmail.com
|
|
RF front end type 2 exists in the wild and can be treated like types
0 and 1.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/2917c7fc-6d88-4007-b6a6-9130bd1991e5@gmail.com
|
|
RTL8821AE is stuck transmitting at the lowest rate allowed by the rate
mask. This is because the firmware doesn't know the device is connected
to a network.
Fix the macros SET_H2CCMD_MSRRPT_PARM_OPMODE and
SET_H2CCMD_MSRRPT_PARM_MACID_IND to work on the first byte of __cmd,
not the second. Now the firmware is correctly notified when the device
is connected to a network and it activates the rate control.
Before (MCS3):
[ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 339 KBytes
[ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec 0 339 KBytes
[ 5] 2.00-3.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
[ 5] 3.00-4.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
[ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec 0 427 KBytes
After (MCS9):
[ 5] 0.00-1.00 sec 33.9 MBytes 284 Mbits/sec 0 771 KBytes
[ 5] 1.00-2.00 sec 31.6 MBytes 265 Mbits/sec 0 865 KBytes
[ 5] 2.00-3.00 sec 29.9 MBytes 251 Mbits/sec 0 963 KBytes
[ 5] 3.00-4.00 sec 28.2 MBytes 237 Mbits/sec 0 963 KBytes
[ 5] 4.00-5.00 sec 26.8 MBytes 224 Mbits/sec 0 963 KBytes
Fixes: 39f40710d0b5 ("rtlwifi: rtl88821ae: Remove usage of private bit manipulation macros")
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/754785b3-8a78-4554-b80d-de5f603b410b@gmail.com
|
|
The layout struct of efuse should not do address alignment by compiler.
Otherwise it leads unexpected layout and size for certain arch suc as arm.
In x86-64, the results are identical before and after this patch.
Also adjust bit-field to prevent over adjacent byte to avoid warning:
rtw88/rtw8822b.h:66:1: note: offset of packed bit-field `res2` has changed in GCC 4.4
66 | } __packed;
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120131.qk0x6OhE-lkp@intel.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241212054203.135046-1-pkshih@realtek.com
|
|
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241220191705.1446-2-thorsten.blum@linux.dev
|
|
|
|
Put some code into APCI ifdefs to avoid a not-used variable warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412222349.R7qW7Q2t-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
|
|
Introduce I3C support by defining I3C accessors for regmap and
implementing an I3C driver. Enable I3C for the NXP P3T1755.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241220093635.11218-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
|
|
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux into locking/core
Lockdep changes for v6.14:
- Use swap() macro in the ww_mutex test.
- Minor fixes and documentation for lockdep configs on internal data structure sizes.
- Some "-Wunused-function" warning fixes for Clang.
Rust locking changes for v6.14:
- Add Rust locking files into LOCKING PRIMITIVES maintainer entry.
- Add `Lock<(), ..>::from_raw()` function to support abstraction on low level locking.
- Expose `Guard::new()` for public usage and add type alias for spinlock and mutex guards.
- Add lockdep checking when creating a new lock `Guard`.
|
|
It claims the issue is only relevant for shared descriptor tables which
is of no concern for POSIX (but then is POSIX of concern to anyone
today?), which I presume predates standarized threading.
The comment also mentions the following systems:
- OpenBSD installing a larval file -- they moved away from it, file is
installed late and EBUSY is returned on conflict
- FreeBSD returning EBADF -- reworked to install the file early like
OpenBSD used to do
- NetBSD "deadlocks in amusing ways" -- their solution looks
Solaris-inspired (not a compliment) and I would not be particularly
surprised if it indeed deadlocked, in amusing ways or otherwise
I don't believe mentioning any of these adds anything and the statement
about the issue not being POSIX-relevant is outdated.
dup2 description in POSIX still does not mention the problem.
Just shorten the comment and be done with it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241205154743.1586584-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix grammar and spelling in the propagate_umount() function.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241204081218.12141-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the hardcoded value `7` in `put_fc_log()` with `ARRAY_SIZE`.
This improves maintainability by ensuring the loop adapts to changes
in the buffer size.
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241202081146.1031780-1-guoweikang.kernel@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The routine is used in link_path_walk() for every path component.
To my reading the entire point of the fence was to grab a fully
populated mnt_idmap, but that's already going to happen with mere
consume fence.
Eliminates an actual fence on arm64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241130051712.1036527-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The fput() of file rcS might not have completed causing issues when
executing the file.
rcS is opened in do_populate_rootfs before executed. At the end of
do_populate_rootfs() flush_delayed_fput() is called. Now
do_populate_rootfs() assumes that all fput()s caused by
do_populate_rootfs() have completed.
But flush_delayed_fput() can only ensure that fput() on the current
delayed_fput_list has finished. Any file that has been removed from
delayed_fput_list asynchronously in the meantime might not have
completed causing the exec to fail.
do_populate_rootfs delayed_fput_list delayed_fput execve
fput() a
fput() a->b
fput() a->b->rcS
__fput(a)
fput() c
fput() c->d
__fput(b)
flush_delayed_fput
__fput(c)
__fput(d)
__fput(b)
__fput(b) execve(rcS)
Ensure that all delayed work is done by calling flush_delayed_work() in
flush_delayed_fput() explicitly.
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/20241023135850067m3w2R0UXESiVCYz_wdAoT@zte.com.cn
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yang Tao <yang.tao172@zte.com.cn>
Cc: Xu Xin <xu.xin16@zte.com.cn>
[brauner: rewrite commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We are attempting to eliminate page->index, so use page->private
instead.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241125175443.2911738-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use proc_douintvec_minmax() instead of proc_dointvec_minmax() to handle
sysctl_nr_open, because its data type is unsigned int, not int.
Fixes: 9b80a184eaad ("fs/file: more unsigned file descriptors")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/r/20241124034636.325337-1-alexjlzheng@tencent.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Mateusz Guzik <mjguzik@gmail.com> says:
quote:
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
The size is stored in a union with i_devices, which is never looked at
unless the inode is for a device.
ext4 and tmpfs are patched, other filesystems can also get there with
some more work.
benchmark:
plug into will-it-scale into tests/readlink1.c:
char *testcase_description = "readlink /initrd.img";
void testcase(unsigned long long *iterations, unsigned long nr)
{
char *tmplink = "/initrd.img";
char buf[1024];
while (1) {
int error = readlink(tmplink, buf, sizeof(buf));
assert(error > 0);
(*iterations)++;
}
}
* patches from https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com:
tmpfs: use inode_set_cached_link()
ext4: use inode_set_cached_link()
vfs: support caching symlink lengths in inodes
Link: https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-4-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some kernel-doc notation to structs in fiemap header files
then pull that into Documentation/filesystems/fiemap.rst
instead of duplicating the header file structs in fiemap.rst.
This helps to future-proof fiemap.rst against struct changes.
Add missing flags documentation from header files into fiemap.rst
for FIEMAP_FLAG_CACHE and FIEMAP_EXTENT_SHARED.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241121011352.201907-1-rdunlap@infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Annotation already used to be there, but got lost in 52ac39e5db5148f7
("seqlock: seqcount_t: Implement all read APIs as statement expressions").
Does not look like it was intentional.
Without it gcc 12 decides to compile the following in path_init:
nd->m_seq = __read_seqcount_begin(&mount_lock.seqcount);
nd->r_seq = __read_seqcount_begin(&rename_lock.seqcount);
into 2 cases of conditional jumps forward if the value is even, aka
branch prediction miss by default in the common case on x86-64.
With the patch jumps are only for odd values.
before:
[snip]
mov 0x104fe96(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
je 0xffffffff813b97fa <path_init+122>
pause
mov 0x104fe8a(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b97ee <path_init+110>
mov %eax,0x48(%rbx)
mov 0x104fdfd(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
je 0xffffffff813b9813 <path_init+147>
pause
mov 0x104fdf1(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b9807 <path_init+135>
[/snip]
after:
[snip]
mov 0x104fec6(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b99af <path_init+607>
mov %eax,0x48(%rbx)
mov 0x104fe35(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b999d <path_init+589>
[/snip]
Interestingly .text gets slightly smaller (as reported by size(1)):
before: 20702563
after: 20702429
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20230727180355.813995-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
Filesystems opt in by calling inode_set_cached_link() when creating an
inode.
The size is stored in a new union utilizing the same space as i_devices,
thus avoiding growing the struct or taking up any more space.
Churn-wise the current readlink_copy() helper is patched to accept the
size instead of calculating it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Christian Brauner <brauner@kernel.org> says:
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Instead of checking d_ops for both nsfs and pidfs we could in a
follow-up patch add a flag argument to struct dentry_operations that
functions similar to file_operations->fop_flags.
* patches from https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org:
selftests: add pidfd bind-mount tests
pidfs: allow bind-mounts
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-2-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-1-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The dp_audio module doesn't make any use of the passed DP panel
instance. Drop the argument.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629056/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-5-f8d1961cf22f@linaro.org
|
|
All other submodules pass arguments directly. Drop struct
msm_dp_panel_in that is used to wrap dp_panel's submodule args and pass
all data to msm_dp_panel_get() directly.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629055/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-4-f8d1961cf22f@linaro.org
|
|
Drop obsolete functions to access audio packet headers. The dp_audio.c
now writes them using msm_dp_write_link() directly.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629052/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-3-f8d1961cf22f@linaro.org
|
|
Use msm_dp_utils_pack_sdp_header() and call msm_dp_write_link() directly
to program audio packet data. Use 0 as Packet ID, as it was not
programmed earlier.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629051/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-2-f8d1961cf22f@linaro.org
|
|
The msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs() are not
called anywhere. If there is a necessity to dump registers, the
snapshotting should be used instead. Drop these two functions.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629049/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-1-f8d1961cf22f@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
Emma Anholt dropped maintainership for PL111 and I
didn't notice it at the time. I've written part of it
and I'm happy to maintain it, list myself as maintainer
and assume active maintainership.
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219-pl111-maintain-v1-1-c60f57c523cd@linaro.org
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
