summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-29btrfs: remove stale prototype of btrfs_write_inodeJeff Layton
This function no longer exists, was removed in 3c4276936f6f ("Btrfs: fix btrfs_write_inode vs delayed iput deadlock"). Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: enable nowait async buffered writesStefan Roesch
Enable nowait async buffered writes in btrfs_do_write_iter() and btrfs_file_open(). In this version encoded buffered writes have the optimization not enabled. Encoded writes are enabled by using an ioctl. io_uring currently does not support ioctls. This might be enabled in the future. Performance results: For fio the following results have been obtained with a queue depth of 1 and 4k block size (runtime 600 secs): sequential writes: without patch with patch libaio psync iops: 55k 134k 117K 148K bw: 221MB/s 538MB/s 469MB/s 592MB/s clat: 15286ns 82ns 994ns 6340ns For an io depth of 1, the new patch improves throughput by over two times (compared to the existing behavior, where buffered writes are processed by an io-worker process) and also the latency is considerably reduced. To achieve the same or better performance with the existing code an io depth of 4 is required. Increasing the iodepth further does not lead to improvements. The tests have been run like this: ./fio --name=seq-writers --ioengine=psync --iodepth=1 --rw=write \ --bs=4k --direct=0 --size=100000m --time_based --runtime=600 \ --numjobs=1 --filename=... ./fio --name=seq-writers --ioengine=io_uring --iodepth=1 --rw=write \ --bs=4k --direct=0 --size=100000m --time_based --runtime=600 \ --numjobs=1 --filename=... ./fio --name=seq-writers --ioengine=libaio --iodepth=1 --rw=write \ --bs=4k --direct=0 --size=100000m --time_based --runtime=600 \ --numjobs=1 --filename=... Testing: This patch has been tested with xfstests, fsx, fio. xfstests shows no new diffs compared to running without the patch series. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: assert nowait mode is not used for some btree search functionsStefan Roesch
Adds nowait asserts to btree search functions which are not used by buffered IO and direct IO paths. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: make btrfs_buffered_write nowait compatibleStefan Roesch
We need to avoid unconditionally calling balance_dirty_pages_ratelimited as it could wait for some reason. Use balance_dirty_pages_ratelimited_flags with the BDP_ASYNC in case the buffered write is nowait, returning EAGAIN eventually. It also moves the function after the again label. This can cause the function to be called a bit later, but this should have no impact in the real world. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: plumb NOWAIT through the write pathStefan Roesch
We have everywhere setup for nowait, plumb NOWAIT through the write path. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: make lock_and_cleanup_extent_if_need nowait compatibleStefan Roesch
Add the nowait parameter to lock_and_cleanup_extent_if_need(). If the nowait parameter is specified we try to lock the extent in nowait mode. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: make prepare_pages nowait compatibleStefan Roesch
Add nowait parameter to the prepare_pages function. In case nowait is specified for an async buffered write request, do a nowait allocation or return -EAGAIN. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: make btrfs_check_nocow_lock nowait compatibleJosef Bacik
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add a nowait flag to btrfs_check_nocow_lock so it can be used by the write path. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: add btrfs_try_lock_ordered_rangeJosef Bacik
For IOCB_NOWAIT we're going to want to use try lock on the extent lock, and simply bail if there's an ordered extent in the range because the only choice there is to wait for the ordered extent to complete. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: add the ability to use NO_FLUSH for data reservationsJosef Bacik
In order to accommodate NOWAIT IOCB's we need to be able to do NO_FLUSH data reservations, so plumb this through the delalloc reservation system. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29btrfs: make can_nocow_extent nowait compatibleJosef Bacik
If we have NOWAIT specified on our IOCB and we're writing into a PREALLOC or NOCOW extent then we need to be able to tell can_nocow_extent that we don't want to wait on any locks or metadata IO. Fix can_nocow_extent to allow for NOWAIT. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-29Merge tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme into block-6.0Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices (Michael Kelley) - disable Write Zeroes on Phison E3C/E4C (Tina Hsu)" * tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme: nvme-pci: disable Write Zeroes on Phison E3C/E4C nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
2022-09-29block: add rationale for not using blk_mq_plug() when applicablePankaj Raghav
There are two places in the block layer at the moment where blk_mq_plug() helper could be used instead of directly accessing the plug from struct current. In both these cases, directly accessing the plug should not have any consequences for zoned devices. Make the intent explicit by adding comments instead of introducing unwanted checks with blk_mq_plug() helper.[1] [1] https://lore.kernel.org/linux-block/f6e54907-1035-2b2c-6387-ed178be05ccb@kernel.dk/ Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Suggested-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20220929144141.140077-1-p.raghav@samsung.com [axboe: fixup multi-line comment style] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29ring-buffer: Fix race between reset page and reading pageSteven Rostedt (Google)
The ring buffer is broken up into sub buffers (currently of page size). Each sub buffer has a pointer to its "tail" (the last event written to the sub buffer). When a new event is requested, the tail is locally incremented to cover the size of the new event. This is done in a way that there is no need for locking. If the tail goes past the end of the sub buffer, the process of moving to the next sub buffer takes place. After setting the current sub buffer to the next one, the previous one that had the tail go passed the end of the sub buffer needs to be reset back to the original tail location (before the new event was requested) and the rest of the sub buffer needs to be "padded". The race happens when a reader takes control of the sub buffer. As readers do a "swap" of sub buffers from the ring buffer to get exclusive access to the sub buffer, it replaces the "head" sub buffer with an empty sub buffer that goes back into the writable portion of the ring buffer. This swap can happen as soon as the writer moves to the next sub buffer and before it updates the last sub buffer with padding. Because the sub buffer can be released to the reader while the writer is still updating the padding, it is possible for the reader to see the event that goes past the end of the sub buffer. This can cause obvious issues. To fix this, add a few memory barriers so that the reader definitely sees the updates to the sub buffer, and also waits until the writer has put back the "tail" of the sub buffer back to the last event that was written on it. To be paranoid, it will only spin for 1 second, otherwise it will warn and shutdown the ring buffer code. 1 second should be enough as the writer does have preemption disabled. If the writer doesn't move within 1 second (with preemption disabled) something is horribly wrong. No interrupt should last 1 second! Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369 Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: c7b0930857e22 ("ring-buffer: prevent adding write in discarded area") Reported-by: Jiazi.Li <jiazi.li@transsion.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29ext4: fix null-ptr-deref in ext4_write_infoBaokun Li
I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-29ext4: don't run ext4lazyinit for read-only filesystemsJosh Triplett
On a read-only filesystem, we won't invoke the block allocator, so we don't need to prefetch the block bitmaps. This avoids starting and running the ext4lazyinit thread at all on a system with no read-write ext4 filesystems (for instance, a container VM with read-only filesystems underneath an overlayfs). Fixes: 21175ca434c5 ("ext4: make prefetch_block_bitmaps default") Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/48b41da1498fcac3287e2e06b660680646c1c050.1659323972.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-29ext4: remove deprecated noacl/nouser_xattr optionsYang Xu
These two options should have been removed since 3.5, but none notices it. Recently, I and Darrick found this. Also, have some discussion for this[1][2][3]. So now, let's remove them. Link: https://lore.kernel.org/linux-ext4/6258F7BB.8010104@fujitsu.com/T/#u[1] Link: https://lore.kernel.org/linux-ext4/20220602110421.ymoug3rwfspmryqg@fedora/T/#t[2] Link: https://lore.kernel.org/linux-ext4/08e2ca4c8f6344bdcd76d75b821116c6147fd57a.camel@kernel.org/T/#t[3] Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1658977369-2478-1-git-send-email-xuyang2018.jy@fujitsu.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-29ext4: avoid crash when inline data creation follows DIO writeJan Kara
When inode is created and written to using direct IO, there is nothing to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets truncated later to say 1 byte and written using normal write, we will try to store the data as inline data. This confuses the code later because the inode now has both normal block and inline data allocated and the confusion manifests for example as: kernel BUG at fs/ext4/inode.c:2721! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:ext4_writepages+0x363d/0x3660 RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293 RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180 RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000 RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128 R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001 FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0 Call Trace: <TASK> do_writepages+0x397/0x640 filemap_fdatawrite_wbc+0x151/0x1b0 file_write_and_wait_range+0x1c9/0x2b0 ext4_sync_file+0x19e/0xa00 vfs_fsync_range+0x17b/0x190 ext4_buffered_write_iter+0x488/0x530 ext4_file_write_iter+0x449/0x1b90 vfs_write+0xbcd/0xf40 ksys_write+0x198/0x2c0 __x64_sys_write+0x7b/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing direct IO write to a file. Cc: stable@kernel.org Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org> Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984 Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-29dt-bindings: gpio-regulator: add vin-supply property supportJerome Neanne
This is same scheme as fixed-regulator. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-3-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29regulator: gpio: Add input_supply support in gpio_regulator_configJerome Neanne
This is simillar as fixed-regulator. Used to extract regulator parent from the device tree. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"Krzysztof Kozlowski
This reverts commit ddea4bbf287b6028eaa15a185d0693856956ecf2 ("ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"), because it introduced double runtime PM put if pm_runtime_get_sync() returns -EACCES: wcd934x-codec wcd934x-codec.3.auto: WCD934X Minor:0x1 Version:0x401 wcd934x-codec wcd934x-codec.3.auto: Runtime PM usage count underflow! The commit claimed no changes in functionality except dropping the reference on -EACCESS. This is exactly the change introducing bug because function calls unconditionally pm_runtime_put_autosuspend() at the end. Fixes: ddea4bbf287b ("ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220929131528.217502-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29tracing/user_events: Update ABI documentation to align to bits vs bytesBeau Belgrave
Update the documentation to reflect the new ABI requirements and how to use the byte index with the mask properly to check event status. Link: https://lkml.kernel.org/r/20220728233309.1896-7-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing/user_events: Use bits vs bytes for enabled status page dataBeau Belgrave
User processes may require many events and when they do the cache performance of a byte index status check is less ideal than a bit index. The previous event limit per-page was 4096, the new limit is 32,768. This change adds a bitwise index to the user_reg struct. Programs check that the bit at status_bit has a bit set within the status page(s). Link: https://lkml.kernel.org/r/20220728233309.1896-6-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing/user_events: Use refcount instead of atomic for ref trackingBeau Belgrave
User processes could open up enough event references to cause rollovers. These could cause use after free scenarios, which we do not want. Switching to refcount APIs prevent this, but will leak memory once saturated. Once saturated, user processes can still use the events. This prevents a bad user process from stopping existing telemetry from being emitted. Link: https://lkml.kernel.org/r/20220728233309.1896-5-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing/user_events: Ensure user provided strings are safely formattedBeau Belgrave
User processes can provide bad strings that may cause issues or leak kernel details back out. Don't trust the content of these strings when formatting strings for matching. This also moves to a consistent dynamic length string creation model. Link: https://lkml.kernel.org/r/20220728233309.1896-4-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing/user_events: Use WRITE instead of READ for io vector importBeau Belgrave
import_single_range expects the direction/rw to be where it came from, not the protection/limit. Since the import is in a write path use WRITE. Link: https://lkml.kernel.org/r/20220728233309.1896-3-beaub@linux.microsoft.com Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing/user_events: Use NULL for strstr checksBeau Belgrave
Trivial fix to ensure strstr checks use NULL instead of 0. Link: https://lkml.kernel.org/r/20220728233309.1896-2-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing: Fix spelling mistake "preapre" -> "prepare"Colin Ian King
There is a spelling mistake in the trace text. Fix it. Link: https://lkml.kernel.org/r/20220928215828.66325-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing: Wake up waiters when tracing is disabledSteven Rostedt (Google)
When tracing is disabled, there's no reason that waiters should stay waiting, wake them up, otherwise tasks get stuck when they should be flushing the buffers. Cc: stable@vger.kernel.org Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29tracing: Add ioctl() to force ring buffer waiters to wake upSteven Rostedt (Google)
If a process is waiting on the ring buffer for data, there currently isn't a clean way to force it to wake up. Add an ioctl call that will force any tasks that are waiting on the trace_pipe_raw file to wake up. Link: https://lkml.kernel.org/r/20220929095029.117f913f@gandalf.local.home Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/panel: simple: Add Multi-Inno Technology MI0800FT-9Christoph Niedermaier
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com
2022-09-29dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panelChristoph Niedermaier
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel compatible string. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114600.4895-1-cniedermaier@dh-electronics.com
2022-09-29block: adapt blk_mq_plug() to not plug for writes that require a zone lockPankaj Raghav
The current implementation of blk_mq_plug() disables plugging for all operations that involves a transfer to the device as we just check if the last bit in op_is_write() function. Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and REQ_OP_WRITE_ZEROS as they might require a zone lock. Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29drm/amdgpu: correct the memcpy size for ip discovery firmwareLe Ma
Use fw->size instead of discovery_tmr_size for fallback path. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Skip put_reset_domain if it doesn't existVignesh Chander
For xgmi sriov, the reset is handled by host driver and hive->reset_domain is not initialized so need to check if it exists before doing a put. Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: remove switch from amdgpu_gmc_noretry_setGraham Sider
Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the switch. Also set noretry=1 as default for GFX 10.3.0 and greater since retry faults are not supported. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fix mc_umc_status used uninitialized warningLeo Li
On ChromeOS clang build, the following warning is seen: /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 && ^~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD' (((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field)) ^~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning uint64_t mc_umc_status, mc_umc_addrt0; ^ = 0 1 error generated. make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1 Fix by initializing mc_umc_status = 0. Fixes: 1014bd1cb32552 ("drm/amdgpu: support to convert dedicated umc mca address") Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add page retirement handling for CPU RASTao Zhou
Do RAS page retirement in poison consumption handler unconditionally. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: use RAS error address convert api in mca notifierTao Zhou
Use the convert interface to simplify code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support to convert dedicated umc mca addressTao Zhou
Update umc error address query interface, the mca address can be read from register or input from parameter. TODO: define a common address conversion function to simplify the code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: export umc error address convert interfaceTao Zhou
Make it global so we can convert specific mca address. v2: rename query_error_address_per_channel to convert_ras_error_address Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix sdma v4 init microcode errorLikun Gao
Fix init SDMA microcode error for sdma v4, which caused by mistake when rearch sdma init microcode function (coding 4.2.2 to 4.2.0). Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()Hamza Mahfooz
Address the following error: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds] 527 | stream->writeback_info[j] = stream->writeback_info[i]; | ~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29, from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27: ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’ 241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES]; | Currently, we aren't checking to see if j remains within writeback_info[]'s bounds. So, add a check to make sure that we aren't overflowing the buffer. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Add amdgpu suspend-resume code path under SRIOVBokun Zhang
- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor during the suspend time. Furthermore, we cannot request a mode 1 reset under SRIOV as VF. Therefore, we will skip it as it is called in suspend_noirq() function. - In the resume code path, we need to send REQ_GPU_INIT to the hypervisor and also resume PSP IP block under SRIOV. Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix compiler warning for amdgpu_gfx_cp_init_microcodeLikun Gao
Change the type of parameter on amdgpu_gfx_cp_init_microcode to fix compiler warning. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix a compiling error in old kernelsAsher Song
This patch is used to fix following compiling error that occurs in some old kernels. error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) { Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add rlc_sr_cntl_list to firmware arrayHawking Zhang
To allow upload the list via psp Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Remove fence_process in count_emittedJiadong.Zhu
The function amdgpu_fence_count_emitted used in work_hander should not call amdgpu_fence_process which must be used in irq handler. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 09:49:15 +0000