summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-04Merge tag 'audit-pr-20221003' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Six audit patches for v6.1, most are pretty trivial, but a quick list of the highlights are below: - Only free the audit proctitle information on task exit. This allows us to cache the information and improve performance slightly. - Use the time_after() macro to do time comparisons instead of doing it directly and potentially causing ourselves problems when the timer wraps. - Convert an audit_context state comparison from a relative enum comparison, e.g. (x < y), to a not-equal comparison to ensure that we are not caught out at some unknown point in the future by an enum shuffle. - A handful of small cleanups such as tidying up comments and removing unused declarations" * tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove selinux_audit_rule_update() declaration audit: use time_after to compare time audit: free audit_proctitle only on task exit audit: explicitly check audit_context->context enum value audit: audit_context pid unused, context enum comment fix audit: fix repeated words in comments
2022-10-04Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' ↵Stephen Boyd
into clk-next - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - Support for Renesas VersaClock7 clock generator family * clk-baikal: clk: baikal-t1: Convert to platform device driver clk: baikal-t1: Add DDR/PCIe directly controlled resets support dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs clk: baikal-t1: Move reset-controls code into a dedicated module clk: baikal-t1: Add SATA internal ref clock buffer clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD * clk-broadcom: clk: bcm: rpi: Add support for VEC clock clk: bcm: rpi: Handle pixel clock in firmware clk: bcm: rpi: Add support HEVC clock clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: bcm2835: Round UART input clock up clk: bcm2835: Make peripheral PLLC critical * clk-vc5: clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: vc5: Use regmap_{set,clear}_bits() where appropriate clk: vc5: Check IO access results * clk-versaclock: clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings
2022-10-04Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' ↵Stephen Boyd
into clk-next - More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
2022-10-04Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', ↵Stephen Boyd
'clk-allwinner' and 'clk-imx' into clk-next * clk-rockchip: dt-bindings: clock: rockchip: change SPDX-License-Identifier dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML clk: rockchip: Add clock controller support for RV1126 SoC dt-bindings: clock: rockchip: Document RV1126 CRU clk: rockchip: Add dt-binding header for RV1126 clk: rockchip: Add MUXTBL variant * clk-renesas: clk: renesas: r8a779g0: Add EtherAVB clocks clk: renesas: r8a779g0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Add I2C clocks clk: renesas: r8a779g0: Add watchdog clock dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC clk: renesas: r8a779f0: Add MSIOF clocks clk: renesas: r9a09g011: Add IIC clock and reset entries clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks clk: renesas: r8a779f0: Add CMT clocks clk: renesas: r8a779f0: Add SDH0 clock * clk-microchip: clk: at91: sama5d2: Add Generic Clocks for UART/USART clk: microchip: add PolarFire SoC fabric clock support dt-bindings: clk: add PolarFire SoC fabric clock ids dt-bindings: clk: document PolarFire SoC fabric clocks dt-bindings: clk: rename mpfs-clkcfg binding clk: microchip: mpfs: update module authorship & licencing clk: microchip: mpfs: convert periph_clk to clk_gate clk: microchip: mpfs: convert cfg_clk to clk_divider clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo() clk: microchip: mpfs: simplify control reg access clk: microchip: mpfs: move id & offset out of clock structs clk: microchip: mpfs: add MSS pll's set & round rate MAINTAINERS: add polarfire soc reset controller reset: add polarfire soc reset support clk: microchip: mpfs: add reset controller dt-bindings: clk: microchip: mpfs: add reset controller support clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation * clk-allwinner: clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper clk: sunxi-ng: d1: Limit PLL rates to stable ranges * clk-imx: clk: imx: scu: fix memleak on platform_device_add() fails clk: imx93: add SAI IPG clk clk: imx93: add MU1/2 clock clk: imx93: switch to use new clk gate API clk: imx: add i.MX93 clk gate clk: imx: clk-composite-93: check white_list clk: imx: clk-composite-93: check slice busy dt-bindings: clock: imx93-clock: add more MU/SAI clocks dt-bindings: clock: imx8mm: don't use multiple blank lines clk: imx8mp: tune the order of enet_qos_root_clk
2022-10-04Merge branches 'clk-samsung', 'clk-mtk', 'clk-rm', 'clk-ast' and 'clk-qcom' ↵Stephen Boyd
into clk-next - Add resets for MediaTek MT8195 PCIe and USB - Remove DaVinci DM644x and DM646x clk driver support * clk-samsung: clk: samsung: MAINTAINERS: add Krzysztof Kozlowski clk: samsung: exynos850: Implement CMU_MFCMSCL domain clk: samsung: exynos850: Implement CMU_IS domain clk: samsung: exynos850: Implement CMU_AUD domain clk: samsung: exynos850: Style fixes clk: samsung: exynosautov9: add fsys1 clock support clk: samsung: exynosautov9: add fsys0 clock support clk: samsung: exynosautov9: correct register offsets of peric0/c1 clk: samsung: exynosautov9: add missing gate clks for peric0/c1 dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions clk: samsung: exynos7885: Add TREX clocks clk: samsung: exynos7885: Implement CMU_FSYS domain dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 clk: samsung: exynos-clkout: Use of_device_get_match_data() * clk-mtk: (42 commits) clk: mediatek: add driver for MT8365 SoC clk: mediatek: Export required common code symbols clk: mediatek: Provide mtk_devm_alloc_clk_data dt-bindings: clock: mediatek: add bindings for MT8365 SoC clk: mediatek: mt8192: deduplicate parent clock lists clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*() clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes clk: mediatek: mt8183: Add clk mux notifier for MFG mux clk: mediatek: mux: add clk notifier functions clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe clk: mediatek: gate: Export mtk_clk_register_gates_with_dev clk: mediatek: add VDOSYS1 clock dt-bindings: clk: mediatek: Add MT8195 DPI clocks ... * clk-rm: clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x * clk-ast: clk: ast2600: BCLK comes from EPLL * clk-qcom: (97 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8939: use parent_hws where possible dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc8280xp: use retention for USB power domains clk: qcom: gdsc: add missing error handling dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos clk: qcom: Add global clock controller driver for SM6375 dt-bindings: clock: add SM6375 QCOM global clock bindings clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc clk: qcom: gdsc: Fix the handling of PWRSTS_RET support clk: qcom: Add SC8280XP GPU clock controller dt-bindings: clock: Add Qualcomm SC8280XP GPU binding clk: qcom: smd: Add SM6375 clocks ...
2022-10-04Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and ↵Stephen Boyd
'clk-xilinx' into clk-next - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging * clk-ofnode: clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: tegra20: Fix refcount leak in tegra20_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra: Fix refcount leak in tegra210_clock_init clk: sprd: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: at91: dt-compat: Hold reference returned by of_get_parent() clk: qoriq: Hold reference returned by of_get_parent() clk: oxnas: Hold reference returned by of_get_parent() clk: st: Hold reference returned by of_get_parent() clk: tegra: Add missing of_node_put() clk: meson: Hold reference returned by of_get_parent() clk: nomadik: Add missing of_node_put() * clk-bindings: dt-bindings: clock: drop minItems equal to maxItems dt-bindings: clock: gpio-gate-clock: Convert to json-schema dt-bindings: clock: Move versaclock.h to dt-bindings/clock dt-bindings: clock: Move lochnagar.h to dt-bindings/clock * clk-cleanup: clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: nxp: fix typo in comment clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clkdev: Simplify devm_clk_hw_register_clkdev() function clkdev: Remove never used devm_clk_release_clkdev() clk: Remove never used devm_of_clk_del_provider() clk: pistachio: Fix initconst confusion clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data clk: do not initialize ret clk: remove extra empty line clk: Fix comment typo clk: move from strlcpy with unused retval to strscpy * clk-zynq: clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate clk: zynqmp: Check the return type zynqmp_pm_query_data clk: zynqmp: Add a check for NULL pointer clk: zynqmp: Replaced strncpy() with strscpy() clk: zynqmp: Fix stack-out-of-bounds in strncpy` clk: zynqmp: make bestdiv unsigned * clk-xilinx: clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: clocking-wizard: Update the compatible clk: clocking-wizard: Fix the reconfig for 5.2 clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs clk: clocking-wizard: Move clocking-wizard out dt-bindings: add documentation of xilinx clocking wizard
2022-10-04clk: qcom: gcc-sm6375: Ensure unsigned long typeStephen Boyd
This PLL frequency needs a UL postfix to avoid compiler warnings on 32-bit architectures. Fixes: 184fdd873d83 ("clk: qcom: Add global clock controller driver for SM6375") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04Merge tag 'x86_cleanups_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: - The usual round of smaller fixes and cleanups all over the tree * tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32 x86: Fix various duplicate-word comment typos x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
2022-10-04clk: qcom: gcc-sm6375: Remove unused variablesKonrad Dybcio
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver. Remove them. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org Fixes: 184fdd873d83 ("clk: qcom: Add global clock controller driver for SM6375") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04Merge tag 'x86_cache_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache resource control updates from Borislav Petkov: - More work by James Morse to disentangle the resctrl filesystem generic code from the architectural one with the endgoal of plugging ARM's MPAM implementation into it too so that the user interface remains the same - Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly overwriting it to 0 * tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data x86/resctrl: Rename and change the units of resctrl_cqm_threshold x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read() x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read() x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read() x86/resctrl: Abstract __rmid_read() x86/resctrl: Allow per-rmid arch private storage to be reset x86/resctrl: Add per-rmid arch private storage for overflow and chunks x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks x86/resctrl: Allow update_mba_bw() to update controls directly x86/resctrl: Remove architecture copy of mbps_val x86/resctrl: Switch over to the resctrl mbps_val list x86/resctrl: Create mba_sc configuration in the rdt_domain x86/resctrl: Abstract and use supports_mba_mbps() x86/resctrl: Remove set_mba_sc()s control array re-initialisation x86/resctrl: Add domain offline callback for resctrl work x86/resctrl: Group struct rdt_hw_domain cleanup x86/resctrl: Add domain online callback for resctrl work x86/resctrl: Merge mon_capable and mon_enabled ...
2022-10-04Merge tag 'x86_microcode_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x75 microcode loader updates from Borislav Petkov: - Get rid of a single ksize() usage - By popular demand, print the previous microcode revision an update was done over - Remove more code related to the now gone MICROCODE_OLD_INTERFACE - Document the problems stemming from microcode late loading * tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Track patch allocation size explicitly x86/microcode: Print previous version of microcode after reload x86/microcode: Remove ->request_microcode_user() x86/microcode: Document the whole late loading problem
2022-10-04Merge tag 'x86_paravirt_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt fix from Borislav Petkov: - Ensure paravirt patching site descriptors are aligned properly so that code can do proper arithmetic with their addresses * tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Ensure proper alignment
2022-10-04Merge tag 'x86_misc_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Borislav Petkov: - Drop misleading "RIP" from the opcodes dumping message - Correct APM entry's Konfig help text * tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Don't mention RIP in "Code: " x86/Kconfig: Specify idle=poll instead of no-hlt
2022-10-04Merge tag 'x86_asm_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm update from Borislav Petkov: - Use the __builtin_ffs/ctzl() compiler builtins for the constant argument case in the kernel's optimized ffs()/ffz() helpers in order to make use of the compiler's constant folding optmization passes. * tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions x86/asm/bitops: Use __builtin_ffs() to evaluate constant expressions
2022-10-04Merge tag 'x86_core_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core fixes from Borislav Petkov: - Make sure an INT3 is slapped after every unconditional retpoline JMP as both vendors suggest - Clean up pciserial a bit * tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86,retpoline: Be sure to emit INT3 after JMP *%\reg x86/earlyprintk: Clean up pciserial
2022-10-04Merge tag 'x86_apic_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 APIC update from Borislav Petkov: - Add support for locking the APIC in X2APIC mode to prevent SGX enclave leaks * tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Don't disable x2APIC if locked
2022-10-04Merge tag 'ras_core_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Borislav Petkov: - Fix the APEI MCE callback handler to consult the hardware about the granularity of the memory error instead of hard-coding it - Offline memory pages on Intel machines after 2 errors reported per page * tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Retrieve poison range from hardware RAS/CEC: Reduce offline page threshold for Intel systems
2022-10-04Merge tag 'x86_cpu_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Print the CPU number at segfault time. The number printed is not always accurate (preemption is enabled at that time) but the print string contains "likely" and after a lot of back'n'forth on this, this was the consensus that was reached. See thread at [1]. - After a *lot* of testing and polishing, finally the clear_user() improvements to inline REP; STOSB by default Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1] * tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Print likely CPU at segfault time x86/clear_user: Make it faster
2022-10-04Merge tag 'x86_sgx_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX update from Borislav Petkov: - Improve the documentation of a couple of SGX functions handling backing storage * tag 'x86_sgx_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Improve comments for sgx_encl_lookup/alloc_backing()
2022-10-04Merge tag 'x86_timers_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RTC cleanups from Borislav Petkov: - Cleanup x86/rtc.c and delete duplicated functionality in favor of using the respective functionality from the RTC library * tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/rtc: Rename mach_set_rtc_mmss() to mach_set_cmos_time() x86/rtc: Rewrite & simplify mach_get_cmos_time() by deleting duplicated functionality
2022-10-04Merge tag 'x86_platform_for_v6.1_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform update from Borislav Petkov: "A single x86/platform improvement when the kernel is running as an ACRN guest: - Get TSC and CPU frequency from CPUID leaf 0x40000010 when the kernel is running as a guest on the ACRN hypervisor" * tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acrn: Set up timekeeping
2022-10-04Merge tag 'edac_updates_for_v6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add support for Skylake-S CPUs to ie31200_edac - Improve error decoding speed of the Intel drivers by avoiding the ACPI facilities but doing decoding in the driver itself - Other misc improvements to the Intel drivers - The usual cleanups and fixlets all over EDAC land * tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i7300: Correct the i7300_exit() function name in comment x86/sb_edac: Add row column translation for Broadwell EDAC/i10nm: Print an extra register set of retry_rd_err_log EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM EDAC/skx_common: Add ChipSelect ADXL component EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations EDAC: Remove obsolete declarations in edac_module.h EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs EDAC/skx_common: Make output format similar EDAC/skx_common: Use driver decoder first EDAC/mc: Drop duplicated dimm->nr_pages debug printout EDAC/mc: Replace spaces with tabs in memtype flags definition EDAC/wq: Remove unneeded flush_workqueue() EDAC/ie31200: Add Skylake-S support
2022-10-04Merge tag 'thermal-v6.1-rc1-2' of ↵Rafael J. Wysocki
https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal control fixes for 6.1-rc1 from Daniel Lezcano: "- Used the platform data to get the sensor id instead of parsing the device in the driver and remove the dedicated OF function (Daniel Lezcano) - Fixed Kconfig dependency for the QCom tsens driver (Jonathan Cameron) - Fixed missing const annotation for the RCar ops driver and removed a duplicate parameter check (Lad Prabhakar) - Fixed a NULL pointer dereference when calling set_trip_temp() (Lad Prabhakar) - Fixed the fourth hardware id in the QCom tsens driver (Vincent Knecht)" * tag 'thermal-v6.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id thermal/core: Add a check before calling set_trip_temp() thermal/core: Drop valid pointer check for type thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS thermal/of: Remove the thermal_zone_of_get_sensor_id() function thermal/drivers/imx_sc: Rely on the platform data to get the resource id
2022-10-04PM: domains: log failures to register always-on domainsJohan Hovold
Always-on PM domains must be on during initialisation or the domain is currently silently rejected. Print an error message in case an always-on domain is not on to make it easier to debug drivers getting this wrong (e.g. by setting an always-on genpd flag without making sure that the state matches). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04io_uring: Add missing inline to io_uring_cmd_import_fixed() dummyGeert Uytterhoeven
If CONFIG_IO_URING is not set: include/linux/io_uring.h:65:12: error: ‘io_uring_cmd_import_fixed’ defined but not used [-Werror=unused-function] 65 | static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw, | ^~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by adding the missing "inline" keyword. Fixes: a9216fac3ed8819c ("io_uring: add io_uring_cmd_import_fixed") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7404b4a696f64e33e5ef3c5bd3754d4f26d13e50.1664887093.git.geert+renesas@glider.be Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-04platform/x86: int3472: Don't leak reference on errorAndy Shevchenko
The for_each_acpi_consumer_dev() takes a reference to the iterator and if we break a loop we must drop that reference. This usually happens when error handling is involved. However it's not the case for skl_int3472_fill_clk_pdata(). Don't leak reference on error by dropping it properly. Fixes: 43cf36974d76 ("platform/x86: int3472: Support multiple clock consumers") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04ACPI: APEI: do not add task_work to kernel thread to avoid memory leakShuai Xue
If an error is detected as a result of user-space process accessing a corrupt memory location, the CPU may take an abort. Then the platform firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA, NOTIFY_SOFTWARE_DELEGATED, etc. For NMI like notifications, commit 7f17b4a121d0 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors") keep track of whether memory_failure() work was queued, and make task_work pending to flush out the queue so that the work is processed before return to user-space. The code use init_mm to check whether the error occurs in user space: if (current->mm != &init_mm) The condition is always true, becase _nobody_ ever has "init_mm" as a real VM any more. In addition to abort, errors can also be signaled as asynchronous exceptions, such as interrupt and SError. In such case, the interrupted current process could be any kind of thread. When a kernel thread is interrupted, the work ghes_kick_task_work deferred to task_work will never be processed because entry_handler returns to call ret_to_kernel() instead of ret_to_user(). Consequently, the estatus_node alloced from ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed. After around 200 allocations in our platform, the ghes_estatus_pool will run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a result, the event failed to be processed. sdei: event 805 on CPU 113 failed with error: -2 Finally, a lot of unhandled events may cause platform firmware to exceed some threshold and reboot. The condition should generally just do if (current->mm) as described in active_mm.rst documentation. Then if an asynchronous error is detected when a kernel thread is running, (e.g. when detected by a background scrubber), do not add task_work to it as the original patch intends to do. Fixes: 7f17b4a121d0 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors") Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04PM: ACPI: reboot: Reinstate S5 for rebootKai-Heng Feng
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused Dell PowerEdge r440 hangs at reboot. The issue is fixed by commit 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER"), so use the new sysoff API to reinstate S5 for reboot on ACPI-based systems. Using S5 for reboot is default behavior under Windows: "A full shutdown (S5) occurs when a system restart is requested" [1]. Link: https://docs.microsoft.com/en-us/windows/win32/power/system-power-state # [1] Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE modeKai-Heng Feng
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before a system restart. Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04Merge branch 'rework/kthreads' into for-linusPetr Mladek
2022-10-04Merge branch 'for-6.1-hash-pointer-init' into for-linusPetr Mladek
2022-10-04ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idleRaul E Rangel
This change adds support for ACPI devices that use ExclusiveAndWake or SharedAndWake in their _CRS GpioInt definition (instead of using _PRW), and also provide power resources. Previously the ACPI subsystem had no idea if the device had a wake capable interrupt armed. This resulted in the ACPI device PM system placing the device into D3Cold, and thus cutting power to the device. With this change we will now query the _S0W method to figure out the appropriate wake capable D-state. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04i2c: acpi: Use ACPI wake capability bit to set wake_irqRaul E Rangel
Device tree already has a mechanism to pass the wake_irq. It does this by looking for the wakeup-source property and setting the I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the ACPI interrupt wake flag to determine if the interrupt can be used to wake the system. Previously the i2c drivers had to make assumptions and blindly enable the wake IRQ. This can cause spurious wake events. e.g., If there is a device with an Active Low interrupt and the device gets powered off while suspending, the interrupt line will go low since it's no longer powered and wakes the system. For this reason we should respect the board designers wishes and honor the wake bit defined on the interrupt. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flagsRaul E Rangel
ACPI IRQ/Interrupt resources contain a bit that describes if the interrupt should wake the system. This change exposes that bit via a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag before arming an IRQ to wake the system. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_getRaul E Rangel
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type keywords. This is an indication that the GPIO IRQ can also be used as a wake source. This change exposes the wake_capable bit so drivers can correctly enable wake functionality instead of making an assumption. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04powerpc/64: Fix msr_check_and_set/clear MSR[EE] raceNicholas Piggin
irq soft-masking means that when Linux irqs are disabled, the MSR[EE] value can change from 1 to 0 asynchronously: if a masked interrupt of the PACA_IRQ_MUST_HARD_MASK variety fires while irqs are disabled, the masked handler will return with MSR[EE]=0. This means a sequence like mtmsr(mfmsr() | MSR_FP) is racy if it can be called with local irqs disabled, unless a hard_irq_disable has been done. Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004051157.308999-2-npiggin@gmail.com
2022-10-04powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARNNicholas Piggin
This new assertion added is generally harmless and gets fixed up naturally, but it does indicate a problem with MSR manipulation somewhere. Fixes: c39fb71a54f0 ("powerpc/64s/interrupt: masked handler debug check for previous hard disable") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004051157.308999-1-npiggin@gmail.com
2022-10-04perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutexPeter Zijlstra
Perf fuzzer gifted a lockdep splat: perf_event_init_context() mutex_lock(parent_ctx->mutex); (B) inherit_task_group() inherit_group() inherit_event() perf_event_alloc() perf_try_init_event() := hw_breakpoint_event_init() register_perf_hw_breakpoint() mutex_lock(child->perf_event_mutex); (A) Which is against the normal (documented) order. Now, this is a false positive in that child is not published yet, but also inherited events never end up on ->perf_event_list. Annotate this one away. Fixes: 0912037fec11 ("perf/hw_breakpoint: Reduce contention with large number of tasks") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2022-10-04perf: Fix pmu_filter_match()Peter Zijlstra
Mark reported that the new for_each_sibling_event() assertion triggers in pmu_filter_match() -- which isn't always called with IRQs disabled or ctx->mutex held. Fixes: f3c0eba28704 ("perf: Add a few assertions") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YvvJq2f/7eFVcnNy@FVFF77S0Q05N
2022-10-04perf: Fix lockdep_assert_event_ctx()Peter Zijlstra
I'm a flamin' moron; because even after Mark told me it should be '&&' I still got it wrong in the final commit. Fixes: f3c0eba28704 ("perf: Add a few assertions") Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/YvvIWmDBWdIUCMZj@FVFF77S0Q05N
2022-10-04ARM: 9246/1: dump: show page table level nameWang Kefeng
ARM could have 3 page table level if ARM_LPAE enabled, or only 2 page table level, let's show the page table level name when dump. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9245/1: dump: show FDT regionWang Kefeng
Since commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region"), FDT is placed between the end of the vmalloc region and the start of the fixmap region, let's show it in dump. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=nAlex Sverdlin
In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the shadow pages dynamically. But even worse is that kasan_release_vmalloc() releases them, which is not compatible with create_mapping() of MODULES_VADDR..MODULES_END range: BUG: Bad page state in process kworker/9:1 pfn:2068b page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0 flags: 0x1000(reserved) raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1000(reserved) Modules linked in: ip_tables CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1 Hardware name: LSI Axxia AXM55XX Workqueue: events do_free_init unwind_backtrace show_stack dump_stack bad_page free_pcp_prepare free_unref_page kasan_depopulate_vmalloc_pte __apply_to_page_range apply_to_existing_page_range kasan_release_vmalloc __purge_vmap_area_lazy _vm_unmap_aliases.part.0 __vunmap do_free_init process_one_work worker_thread kthread Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9240/1: dma-mapping: Pass (void *) to virt_to_page()Linus Walleij
Pointers to virtual memory functions are (void *) but the __dma_update_pte() function is passing an unsigned long. Fix this up by explicit cast. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC valueLi Huafei
Because an exception stack frame is not created in the exception entry, save_trace() does special handling for the exception PC, but this is only needed when CONFIG_FRAME_POINTER_UNWIND=y. When CONFIG_ARM_UNWIND=y, unwind annotations have been added to the exception entry and save_trace() will repeatedly save the exception PC: [0x7f000090] hrtimer_hander+0x8/0x10 [hrtimer] [0x8019ec50] __hrtimer_run_queues+0x18c/0x394 [0x8019f760] hrtimer_run_queues+0xbc/0xd0 [0x8019def0] update_process_times+0x34/0x80 [0x801ad2a4] tick_periodic+0x48/0xd0 [0x801ad3dc] tick_handle_periodic+0x1c/0x7c [0x8010f2e0] twd_handler+0x30/0x40 [0x80177620] handle_percpu_devid_irq+0xa0/0x23c [0x801718d0] generic_handle_domain_irq+0x24/0x34 [0x80502d28] gic_handle_irq+0x74/0x88 [0x8085817c] generic_handle_arch_irq+0x58/0x78 [0x80100ba8] __irq_svc+0x88/0xc8 [0x80108114] arch_cpu_idle+0x38/0x3c [0x80108114] arch_cpu_idle+0x38/0x3c <==== duplicate saved exception PC [0x80861bf8] default_idle_call+0x38/0x130 [0x8015d5cc] do_idle+0x150/0x214 [0x8015d978] cpu_startup_entry+0x18/0x1c [0x808589c0] rest_init+0xd8/0xdc [0x80c00a44] arch_post_acpi_subsys_init+0x0/0x8 We can move the special handling of the exception PC in save_trace() to the unwind_frame() of the frame pointer unwinder. Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()Li Huafei
When using the frame pointer unwinder, it was found that the stack trace output of stack_trace_save() is incomplete if the stack contains call_with_stack(): [0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer] [0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer] [0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4 [0x801a7350] hrtimer_run_queues+0xc4/0xd8 [0x801a597c] update_process_times+0x3c/0x88 [0x801b5a98] tick_periodic+0x50/0xd8 [0x801b5bf4] tick_handle_periodic+0x24/0x84 [0x8010ffc4] twd_handler+0x38/0x48 [0x8017d220] handle_percpu_devid_irq+0xa8/0x244 [0x80176e9c] generic_handle_domain_irq+0x2c/0x3c [0x8052e3a8] gic_handle_irq+0x7c/0x90 [0x808ab15c] generic_handle_arch_irq+0x60/0x80 [0x8051191c] call_with_stack+0x1c/0x20 For the frame pointer unwinder, unwind_frame() checks stackframe::fp by stackframe::sp. Since call_with_stack() switches the SP from one stack to another, stackframe::fp and stackframe: :sp will point to different stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip checking stackframe::fp at this point to avoid this problem. Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-10-04alpha: add full ioread64/iowrite64 implementationArnd Bergmann
The previous patch introduced ioread64/iowrite64 declarations, but this means we no longer get the io-64-nonatomic variant, and run into a long error when someone actually wants to use these: ERROR: modpost: "ioread64" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined! Add the (hopefully) correct implementation for each machine type, based on the 32-bit accessor. Since the 32-bit return type does not work for ioread64(), change the internal implementation to use the correct width consistently, but leave the external interface to match the asm-generic/iomap.h header that uses 32-bit or 64-bit return values. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 7e772dad9913 ("alpha: Use generic <asm-generic/io.h>") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'timers-v6.1-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event updates from Daniel Lezcano: - Added DT bindings for Mediatek MT8188 (Johnson Wang) - Added DT bindings for Renesas r8a779f0 (Wolfram Sang) - Added support for RZ/V2L SoC (Lad Prabhakar) - Rename TIMER_IRQ_EN to TIMER_IRQ_CLEAR to prevent confusion on sun4i (Victor Hassan) - Added support for Exynos ARTPEC-8 MCT, including DT bindings (Vincent Whitchurch) - Fixed handling of ARM erratum 858921 on the ARM Arch timer (Kunkun Jiang) - Added missing call platform_device_put() in the error path on ther GXP timer (Lin Yujun) - Cleaned the timer TI DM driver by self-encapsulating the code, dropping dead code and simplifying some functions (Tony Lindgren) - Added a DT property to tell the driver the clock is no longer divided on recent NXP hardware (Peng Fan) - Fixed the CNTPCT_LO and CNTVCT_LO values in the ARM arch timer (Yang Guo) Link: https://lore.kernel.org/r/b28ac4b0-5745-b3a9-b7e7-cc86dcb1b023@linaro.org
2022-10-04thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_idVincent Knecht
Reading temperature from this sensor fails with 'Invalid argument'. Looking at old vendor dts [1], its hw_id should be 3 instead of 4. Change this hw_id accordingly. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511 Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20220811105014.7194-1-vincent.knecht@mailoo.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/core: Add a check before calling set_trip_temp()Lad Prabhakar
The thermal driver [0] for Renesas RZ/G2L SoC does not implement set_trip_temp() callback but has trips commit 9326167058e8 ("thermal/core: Move set_trip_temp ops to the sysfs code") changed the behaviour which causes the below panic when trying to set the trip temperature: root@smarc-rzg2l:~# echo 51000 > /sys/class/thermal/thermal_zone0/trip_point_0_temp [ 92.461521] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 92.470958] Mem abort info: [ 92.474311] ESR = 0x0000000086000004 [ 92.478546] EC = 0x21: IABT (current EL), IL = 32 bits [ 92.484290] SET = 0, FnV = 0 [ 92.487693] EA = 0, S1PTW = 0 [ 92.491153] FSC = 0x04: level 0 translation fault [ 92.496461] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004e885000 [ 92.503736] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 92.510869] Internal error: Oops: 86000004 [#3] PREEMPT SMP [ 92.516556] CPU: 0 PID: 290 Comm: sh Tainted: G D 6.0.0-rc4-next-20220906-arm64-renesas-00124-g84633c87c5f6-dirty #509 [ 92.528814] Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT) [ 92.535441] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 92.542516] pc : 0x0 [ 92.544764] lr : trip_point_temp_store+0x84/0x140 [ 92.549582] sp : ffff80000a92bc10 [ 92.552961] x29: ffff80000a92bc10 x28: ffff00000d8a45c0 x27: 0000000000000000 [ 92.560249] x26: 0000000000000000 x25: ffff8000082b53e8 x24: ffff00000eaffc20 [ 92.567532] x23: ffff80000a92bd68 x22: ffff00000d3e0f80 x21: 0000000000000006 [ 92.574814] x20: ffff800009149000 x19: ffff00000b8ab000 x18: 0000000000000000 [ 92.582097] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab028cdee0 [ 92.589378] x14: 0000000000000000 x13: 0000000000000000 x12: ffff80000a92bbd0 [ 92.596659] x11: ffff00000d3e0f80 x10: ffff800009149eb8 x9 : 000000000000000a [ 92.603940] x8 : 00000000ffffffc9 x7 : 0000000000000005 x6 : 000000000000002a [ 92.611220] x5 : 000000000000c738 x4 : 00000000ffffffd3 x3 : 0000000000000000 [ 92.618500] x2 : 000000000000c738 x1 : 0000000000000000 x0 : ffff00000b8ab000 [ 92.625781] Call trace: [ 92.628282] 0x0 [ 92.630176] dev_attr_store+0x14/0x28 [ 92.633935] sysfs_kf_write+0x4c/0x70 [ 92.637681] kernfs_fop_write_iter+0x160/0x1e0 [ 92.642213] vfs_write+0x474/0x540 [ 92.645703] ksys_write+0x68/0xf8 [ 92.649100] __arm64_sys_write+0x18/0x20 [ 92.653111] invoke_syscall+0x40/0xf8 [ 92.656866] el0_svc_common.constprop.3+0x88/0x110 [ 92.661758] do_el0_svc+0x20/0x78 [ 92.665158] el0_svc+0x3c/0x90 [ 92.668291] el0t_64_sync_handler+0x90/0xb8 [ 92.672563] el0t_64_sync+0x148/0x14c [ 92.676322] Code: bad PC value [ 92.679453] ---[ end trace 0000000000000000 ]--- /bin/start_getty: line 40: 290 Segmentation fault ${setsid:-} ${getty} -L $1 $2 $3 Poky (Yocto Project Reference Distro) 3.2.1 smarc-rzg2l ttySC0 smarc-rzg2l login: This patch fixes the above issue by adding a check to see if set_trip_temp() callback is implemented before calling it. [0] drivers/thermal/rzg2l_thermal.c Fixes: 9326167058e8 ("thermal/core: Move set_trip_temp ops to the sysfs code") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220908174610.7837-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-11 16:23:21 +0000