summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-27xfs: allow parent directory scans to be interrupted with fatal signalsDarrick J. Wong
Allow a fatal signal to interrupt us when we're scanning a directory to verify a parent pointer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-11-27Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' ↵Stephen Boyd
into clk-next - Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers
2019-11-27Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and ↵Stephen Boyd
'clk-pxa' into clk-next - Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and ↵Stephen Boyd
'clk-aspeed' into clk-next - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and ↵Stephen Boyd
'clk-imx' into clk-next * clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-27ALSA: hda: hdmi - fix regression in connect list handlingKai Vehmanen
Fix regression in how intel_haswell_fixup_connect_list() results are used in hda_read_pin_conn(). Use of snd_hda_get_raw_connections() in hda_read_pin_conn() bypasses the cache and thus also bypasses the overridden pin connection list. On platforms that require the connection list fixup, mux list will be empty and HDMI playback will fail to -EBUSY at open. Fix the regression in hda_read_pinn_conn(). Simplify code as suggested by Takashi Iwai to remove old intel_haswell_fixup_connect_list() and copy the cvt_nid list directly and not use snd_hda_override_conn_list() at all. Fixes: 9c32fea83692 ("ALSA: hda - Add DP-MST support for non-acomp codecs") BugLink: https://github.com/thesofproject/linux/issues/1537 Cc: Nikhil Mahale <nmahale@nvidia.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191127161240.17026-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-27Merge branches 'clk-rohm', 'clk-hisilicon', 'clk-marvell', 'clk-unused' and ↵Stephen Boyd
'clk-devm-ioremap-resource' into clk-next - Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() * clk-rohm: clk: bd718x7: Add MODULE_ALIAS() * clk-hisilicon: clk: hisilicon: fix sparse warnings in clk-hi3660.c clk: hisilicon: fix sparse warnings in clk-hi3670.c * clk-marvell: dt-bindings: clk: armada3700: document the PCIe clock dt-bindings: clk: armada3700: fix typo in SoC name clk: mvebu: armada-37xx-periph: change suspend/resume time clk: mvebu: armada-37xx-periph: add PCIe gated clock * clk-unused: clk: armada-xp: remove unused code clk: imx: imx8mn: drop unused pll enum clk: ast2600: remove unused variable 'eclk_parent_names' * clk-devm-ioremap-resource: clk: sprd: Change to use devm_platform_ioremap_resource() clk: s3c2410: use devm_platform_ioremap_resource() to simplify code clk: axs10x: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code clk: davinci: use devm_platform_ioremap_resource() to simplify code clk: hisilicon: use devm_platform_ioremap_resource() to simplify code clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
2019-11-27Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"Je Yen Tam
This reverts commit fdc2de87124f5183a98ea7eced1f76dbdba22951 ("serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"). The commit fdc2de87124f ("serial/8250: Add support for NI-Serial PXI/PXIe+485 devices") introduced a breakage on NI-Serial PXI(e)-RS485 devices, RS-232 variants have no issue. The Linux system can enumerate the NI-Serial PXI(e)-RS485 devices, but it broke the R/W operation on the ports. However, the implementation is working on the NI internal Linux RT kernel but it does not work in the Linux main tree kernel. This is only affecting NI products, specifically the RS-485 variants. Reverting the upstream until a proper implementation that can apply to both NI internal Linux kernel and Linux mainline kernel is figured out. Signed-off-by: Je Yen Tam <je.yen.tam@ni.com> Fixes: fdc2de87124f ("serial/8250: Add support for NI-Serial PXI/PXIe+485 devices") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191127075301.9866-1-je.yen.tam@ni.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-27ASoC: max98090: fix possible race conditionsTzung-Bi Shih
max98090_interrupt() and max98090_pll_work() run in 2 different threads. There are 2 possible races: Note: M98090_REG_DEVICE_STATUS = 0x01. Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked. max98090_interrupt max98090_pll_work ---------------------------------------------- schedule max98090_pll_work restart max98090 codec receive ULK INT assert ULK == 0 schedule max98090_pll_work (1). In the case (1), the PLL is locked but max98090_interrupt unnecessarily schedules another max98090_pll_work. max98090_interrupt max98090_pll_work max98090 codec ---------------------------------------------------------------------- ULK = 1 receive ULK INT read 0x01 ULK = 0 (clear on read) schedule max98090_pll_work restart max98090 codec ULK = 1 receive ULK INT read 0x01 ULK = 0 (clear on read) read 0x01 assert ULK == 0 (2). In the case (2), both max98090_interrupt and max98090_pll_work read the same clear-on-read register. max98090_pll_work would falsely thought PLL is locked. Note: the case (2) race is introduced by the previous commit ("ASoC: max98090: exit workaround earlier if PLL is locked") to check the status and exit the loop earlier in max98090_pll_work. There are 2 possible solution options: A. turn off ULK interrupt before scheduling max98090_pll_work; and turn on again before exiting max98090_pll_work. B. remove the second thread of execution. Option A cannot fix the case (2) race because it still has 2 threads access the same clear-on-read register simultaneously. Although we could suppose the register is volatile and read the status via I2C could be much slower than the hardware raises the bits. Option B introduces a maximum 10~12 msec penalty delay in the interrupt handler. However, it could only punish the jack detection by extra 10~12 msec. Adopts option B which is the better solution overall. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: max98090: exit workaround earlier if PLL is lockedTzung-Bi Shih
According to the datasheet, PLL lock time typically takes 2 msec and at most takes 7 msec. Check the lock status every 1 msec and exit the workaround if PLL is locked. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: max98090: remove msleep in PLL unlocked workaroundTzung-Bi Shih
It was observed Baytrail-based chromebooks could cause continuous PLL unlocked when using playback stream and capture stream simultaneously. Specifically, starting a capture stream after started a playback stream. As a result, the audio data could corrupt or turn completely silent. As the datasheet suggested, the maximum PLL lock time should be 7 msec. The workaround resets the codec softly by toggling SHDN off and on if PLL failed to lock for 10 msec. Notably, there is no suggested hold time for SHDN off. On Baytrail-based chromebooks, it would easily happen continuous PLL unlocked if there is a 10 msec delay between SHDN off and on. Removes the msleep(). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27spi: cadence: Correct handling of native chipselectCharles Keepax
To fix a regression on the Cadence SPI driver, this patch reverts commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native chipselect"). This patch was not the correct fix for the issue. The SPI framework calls the set_cs line with the logic level it desires on the chip select line, as such the old is_high handling was correct. However, this was broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") all controllers that offered the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware chip selects. This caused the value passed into the driver to be inverted. Which unfortunately makes it look like a logical enable the chip select value. Since the core was corrected to not unconditionally apply SPI_CS_HIGH, the Cadence driver, whilst using the hardware chip select, will deselect the chip select every time we attempt to communicate with the device, which results in failed communications. Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27regulator: fix use after free issueWen Yang
This is caused by dereferencing 'rdev' after put_device() in the _regulator_get()/_regulator_put() functions. This patch just moves the put_device() down a bit to avoid the issue. Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: wm8904: fix automatic sysclk configurationMichael Walle
The simple-card tries to signal the codec to disable rate constraints, see commit 2458adb8f92a ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown"). This wasn't handled by the codec, instead it would set the FLL frequency to 0Hz which isn't working. Since we don't have any rate constraints just ignore this request. Fixes: 13409d27cb39 ("ASoC: wm8904: configure sysclk/FLL automatically") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191122232532.22258-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: rt5677: Fix build error without CONFIG_SPIYueHaibing
If CONFIG_SPI is n, SND_SOC_RT5677_SPI also is n, building fails: sound/soc/codecs/rt5677.o: In function `rt5677_irq': rt5677.c:(.text+0x2dbf): undefined reference to `rt5677_spi_hotword_detected' sound/soc/codecs/rt5677.o: In function `rt5677_dsp_work': rt5677.c:(.text+0x3709): undefined reference to `rt5677_spi_write' This adds stub helpers to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 461c623270e4 ("ASoC: rt5677: Load firmware via SPI using delayed work") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191127082145.6100-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: SOF: topology: Fix unload for SAI/ESAIDaniel Baluta
Link unload now fails for ESAI/SAI DAIs with: "error: invalid DAI type 6" because DAI type is not properly handled. Fix this by correctly handling cases where type is ESAI or SAI. Fixes: a4eff5f86c9c5e7 ("ASoC: SOF: imx: Read ESAI parameters and send them to DSP") Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191126141606.21650-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: SOF: Intel: BYT: fix a copy/paste mistake in byt_dump()Keyon Jie
The shim registers in BYT/CHT/BSW are 64bits based, correct the copy/paste (from bdw.c where the shim registers are 32bits based) error in byt_dump(). Fixes: 3a9e204d4e36 ("ASoC: SOF: Intel: Add context data to any IPC timeout") Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191126141533.21601-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ASoC: AMD: Enable clk in startup intead of hw_paramsYu-Hsuan Hsu
Some usages only call startup and shutdown without setting hw_params (e.g. arecord --dump-hw-params). If we don't enable clk in startup, it will cause ref count error because the clk will be disabled in shutdown. For this reason, we should move enabling clk from hw_params to startup. In addition, the hw_params is fixed in this driver(48000 rate, 2 channels, S16_LE format) so we don't need to change the clk rate after the hw_params is set. Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Acked-by: Akshu Agrawal <akshu.agarawal@amd.com> Link: https://lore.kernel.org/r/20191126075424.80668-1-yuhsuan@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-27ALSA: aloop: Avoid pointer dereference before null-checkAndrew Gabbasov
Static analysis tools (cppcheck and PVS Studio) report an error in loopback_snd_timer_period_elapsed() regarding dpcm_play pointer dereference earlier than its null-check. And although this is a result of a formal check, and the pointer correctness is also protected by having a corresponding bit set in the "running" mask, re-ordering of the lines can imake the code even formally correct and eliminate those static analysis error reports. Fixes: 26c53379f98d ("ALSA: aloop: Support selection of snd_timer instead of jiffies") Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191127110622.26105-1-andrew_gabbasov@mentor.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-27KVM x86: Move kvm cpuid support out of svmPeter Gonda
Memory encryption support does not have module parameter dependencies and can be moved into the general x86 cpuid __do_cpuid_ent function. This changes maintains current behavior of passing through all of CPUID.8000001F. Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Peter Gonda <pgonda@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-27x86/entry/32: Remove unused 'restore_all_notrace' local labelBorislav Petkov
Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0Anthony Steinhauser
When you successfully write 0 to /sys/devices/cpu/rdpmc, the RDPMC instruction should be disabled unconditionally and immediately (after you close the SYSFS file) by the documentation. Instead, in the current implementation the PMU must be reloaded which happens only eventually some time in the future. Only after that the RDPMC instruction becomes disabled (on ring 3) on the respective core. This change makes the treatment of the 0 value as blocking and as unconditional as the current treatment of the 2 value, only the CR4.PCE bit is naturally set to false instead of true. Signed-off-by: Anthony Steinhauser <asteinhauser@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: https://lkml.kernel.org/r/20191125054838.137615-1-asteinhauser@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhubEnric Balletbo i Serra
Like the other CrOS EC sub-drivers set that depends on his parent and set default to the parent's value. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-11-27fuse: fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-27fuse: fix leak of fuse_io_privMiklos Szeredi
exit_aio() is sometimes stuck in wait_for_completion() after aio is issued with direct IO and the task receives a signal. The reason is failure to call ->ki_complete() due to a leaked reference to fuse_io_priv. This happens in fuse_async_req_send() if fuse_simple_background() returns an error (e.g. -EINTR). In this case the error value is propagated via io->err, so return success to not confuse callers. This issue is tracked as a virtio-fs issue: https://gitlab.com/virtio-fs/qemu/issues/14 Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Fixes: 45ac96ed7c36 ("fuse: convert direct_io to simple api") Cc: <stable@vger.kernel.org> # v5.4 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-27rtc: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133940.13881-1-krzk@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: xgene: Remove unused struct device in struct xgene_rtc_devNobuhiro Iwamatsu
struct device in struct xgene_rtc_dev is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090234.32180-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: sun6i: Remove struct device from sun6i_rtc_devNobuhiro Iwamatsu
struct device in struct sun6i_rtc_dev is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090538.32364-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: st-lpc: Remove struct resource from struct st_rtcNobuhiro Iwamatsu
struct resource in struct st_rtc is not used, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123091241.1905-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: pcf8523: Remove struct pcf8523Nobuhiro Iwamatsu
struct pcf8523 is referenced only by pcf8523_probe(). And member variable in this is not referenced by any function. Remove struct pcf8523. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191123090838.1619-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: meson: remove redundant assignment to variable retriesColin Ian King
The variable retries is being initialized with a value that is never read and it is being updated later with a new value in a for-loop. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20191122225210.109172-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: v3020: remove set but unused variableAlexandre Belloni
Fix the following warning: drivers/rtc/rtc-v3020.c: In function ‘rtc_probe’: drivers/rtc/rtc-v3020.c:287:6: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20191122102212.400158-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: tegra: remove set but unused variableAlexandre Belloni
Fix the following warning: drivers/rtc/rtc-tegra.c: In function ‘tegra_rtc_read_time’: drivers/rtc/rtc-tegra.c:106:11: warning: variable ‘msec’ set but not used [-Wunused-but-set-variable] Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191122102212.400158-8-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtcAlexandre Belloni
The change from u8 ctrl_reg to const struct pm8xxx_rtc_regs *regs; did not properly update the kerneldoc comment. Fixes: drivers/rtc/rtc-pm8xxx.c:64: warning: Function parameter or member 'regs' not described in 'pm8xxx_rtc' Fixes: c8d523a4b053 ("drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc") Link: https://lore.kernel.org/r/20191122102212.400158-7-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: m41t80: remove excess kerneldocAlexandre Belloni
Fix the following warning: drivers/rtc/rtc-m41t80.c:716: warning: Excess function parameter 'inode' description in 'wdt_ioctl' Link: https://lore.kernel.org/r/20191122102212.400158-6-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: ds1685: fix build error with make W=1Alexandre Belloni
Fix the following parsing errors when building with W=1: drivers/rtc/rtc-ds1685.c:1053: error: Cannot parse struct or union! drivers/rtc/rtc-ds1685.c:1062: error: Cannot parse struct or union! drivers/rtc/rtc-ds1685.c:1363: warning: cannot understand function prototype: 'struct platform_driver ds1685_rtc_driver = ' Cc: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20191122102212.400158-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: ds1685: remove set but unused variablesAlexandre Belloni
Fix the following warnings: drivers/rtc/rtc-ds1685.c: In function ‘ds1685_rtc_read_time’: drivers/rtc/rtc-ds1685.c:264:5: warning: variable ‘ctrlb’ set but not used [-Wunused-but-set-variable] 264 | u8 ctrlb, century; | ^~~~~ drivers/rtc/rtc-ds1685.c: In function ‘ds1685_rtc_proc’: drivers/rtc/rtc-ds1685.c:758:19: warning: variable ‘ctrlc’ set but not used [-Wunused-but-set-variable] 758 | u8 ctrla, ctrlb, ctrlc, ctrld, ctrl4a, ctrl4b, ssn[8]; | ^~~~~ Cc: Joshua Kinard <kumba@gentoo.org> Acked-By: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20191122102212.400158-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: ds1374: remove unused variableAlexandre Belloni
Fix warning: drivers/rtc/rtc-ds1374.c: In function ‘ds1374_wdt_disable’: drivers/rtc/rtc-ds1374.c:442:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20191122102212.400158-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: sysfs: fix hctosys_show kerneldocAlexandre Belloni
Fix undocumented function parameters: drivers/rtc/sysfs.c:112: warning: Function parameter or member 'dev' not described in 'hctosys_show' drivers/rtc/sysfs.c:112: warning: Function parameter or member 'attr' not described in 'hctosys_show' drivers/rtc/sysfs.c:112: warning: Function parameter or member 'buf' not described in 'hctosys_show' Link: https://lore.kernel.org/r/20191122102212.400158-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27rtc: interface: fix kerneldoc commentsAlexandre Belloni
Fix kerneldoc warnings: drivers/rtc/interface.c:619: warning: Function parameter or member 'num' not described in 'rtc_handle_legacy_irq' drivers/rtc/interface.c:619: warning: Function parameter or member 'mode' not described in 'rtc_handle_legacy_irq' drivers/rtc/interface.c:804: warning: Function parameter or member 'rtc' not described in 'rtc_timer_enqueue' drivers/rtc/interface.c:804: warning: Function parameter or member 'timer' not described in 'rtc_timer_enqueue' drivers/rtc/interface.c:864: warning: Function parameter or member 'rtc' not described in 'rtc_timer_remove' drivers/rtc/interface.c:864: warning: Function parameter or member 'timer' not described in 'rtc_timer_remove' drivers/rtc/interface.c:900: warning: Function parameter or member 'work' not described in 'rtc_timer_do_work' drivers/rtc/interface.c:1035: warning: Function parameter or member 'rtc' not described in 'rtc_read_offset' drivers/rtc/interface.c:1035: warning: Function parameter or member 'offset' not described in 'rtc_read_offset' drivers/rtc/interface.c:1070: warning: Function parameter or member 'rtc' not described in 'rtc_set_offset' drivers/rtc/interface.c:1070: warning: Function parameter or member 'offset' not described in 'rtc_set_offset' Link: https://lore.kernel.org/r/20191127082932.666869-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-27drm/i915: Reduce nested prepare_remote_context() to a trylockChris Wilson
On context retiring, we may invoke the kernel_context to unpin this context. Elsewhere, we may use the kernel_context to modify this context. This currently leads to an AB-BA lock inversion, so we need to back-off from the contended lock, and repeat. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111732 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: a9877da2d629 ("drm/i915/oa: Reconfigure contexts on the fly") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191126065521.2331017-1-chris@chris-wilson.co.uk (cherry picked from commit 58b4c1a07ada7fb91ea757bdb9bd47df02207357) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-27drm/i915: Default to a more lenient forced preemption timeoutChris Wilson
Based on a sampling of a number of benchmarks across platforms, by default opt for a much more lenient timeout so that we should not adversely affect existing "good" clients. 640ms ought to be enough for anyone. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112169 Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125162737.2161069-1-chris@chris-wilson.co.uk (cherry picked from commit 5766a5ffc6a69595903865518c43636bde0e4ac4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-27powerpc: Define arch_is_kernel_initmem_freed() for lockdepMichael Ellerman
Under certain circumstances, we hit a warning in lockdep_register_key: if (WARN_ON_ONCE(static_obj(key))) return; This occurs when the key falls into initmem that has since been freed and can now be reused. This has been observed on boot, and under memory pressure. Define arch_is_kernel_initmem_freed(), which allows lockdep to correctly identify this memory as dynamic. This fixes a bug picked up by the powerpc64 syzkaller instance where we hit the WARN via alloc_netdev_mqs. Reported-by: Qian Cai <cai@lca.pw> Reported-by: ppc syzbot c/o Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/87lfs4f7d6.fsf@dja-thinkpad.axtens.net
2019-11-27drm/mgag200: Add workaround for HW that does not support 'startadd'Thomas Zimmermann
There's at least one system that does not interpret the value of the device's 'startadd' field correctly, which leads to incorrectly displayed scanout buffers. Always placing the active scanout buffer at offset 0 works around the problem. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: John Donnelly <john.p.donnelly@oracle.com> Tested-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "José Roberto de Souza" <jose.souza@intel.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.3+ Link: https://gitlab.freedesktop.org/drm/misc/issues/7 Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-4-tzimmermann@suse.de
2019-11-27drm/mgag200: Store flags from PCI driver data in device structureThomas Zimmermann
The flags field in struct mga_device has been unused so far. We now use it to store flag bits from the PCI driver. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin") Cc: John Donnelly <john.p.donnelly@oracle.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "José Roberto de Souza" <jose.souza@intel.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.3+ Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-3-tzimmermann@suse.de
2019-11-27drm/mgag200: Extract device type from flagsThomas Zimmermann
Adds a conversion function that extracts the device type from the PCI id-table flags. Allows for storing additional information in the other flag bits. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: John Donnelly <john.p.donnelly@oracle.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: "José Roberto de Souza" <jose.souza@intel.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.3+ Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-2-tzimmermann@suse.de
2019-11-27vcs: prevent write access to vcsu devicesNicolas Pitre
Commit d21b0be246bf ("vt: introduce unicode mode for /dev/vcs") guarded against using devices containing attributes as this is not yet implemented. It however failed to guard against writes to any devices as this is also unimplemented. Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Cc: <stable@vger.kernel.org> # v4.19+ Cc: Jiri Slaby <jslaby@suse.com> Fixes: d21b0be246bf ("vt: introduce unicode mode for /dev/vcs") Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.1911051030580.30289@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-27drm/i915/gvt: Update force-to-nonpriv register whitelistGao, Fred
Host print below warning message when creating guest: "gvt: vgpu(1) Invalid FORCE_NONPRIV write 10002349". Add register 0x2348 in force-to-nonpriv whitelist as required by guest. Signed-off-by: Gao, Fred <fred.gao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-11-27crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx()Dan Carpenter
The hisi_acc_create_sgl_pool() function returns error pointers, it never returns NULL pointers. Fixes: 416d82204df4 ("crypto: hisilicon - add HiSilicon SEC V2 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-27crypto: talitos - Fix build error by selecting LIB_DESHerbert Xu
The talitos driver needs to select LIB_DES as it needs calls des_expand_key. Fixes: 9d574ae8ebc1 ("crypto: talitos/des - switch to new...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-26 04:33:45 +0000