| Age | Commit message (Collapse) | Author |
|---|
|
The stack depot filters out everything outside of the top interrupt
context as an uninteresting or irrelevant part of the stack traces. This
helps with stack trace de-duplication, avoiding an explosion of saved
stack traces that share the same IRQ context code path but originate
from different randomly interrupted points, eventually exhausting the
stack depot.
Filtering uses in_irqentry_text() to identify functions within the
.irqentry.text and .softirqentry.text sections, which then become the
last stack trace entries being saved.
While __do_softirq() is placed into the .softirqentry.text section by
common code, populating .irqentry.text is architecture-specific.
Currently, the .irqentry.text section on s390 is empty, which prevents
stack depot filtering and de-duplication and could result in warnings
like:
Stack depot reached limit capacity
WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8
with PREEMPT and KASAN enabled.
Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into
the .irqentry.text section and updating the kprobes blacklist to include
the .irqentry.text section.
This is done only for asynchronous interrupts and explicitly not for
program checks, which are synchronous and where the context beyond the
program check is important to preserve. Despite machine checks being
somewhat in between, they are extremely rare, and preserving context
when possible is also of value.
SVCs and Restart Interrupts are not relevant, one being always at the
boundary to user space and the other being a one-time thing.
IRQ entries filtering is also optionally used in ftrace function graph,
where the same logic applies.
Cc: stable@vger.kernel.org # 5.15+
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Free_sampling_buffer() releases the Sampling Data Buffers (SDBs)
and Sampling Data Buffer Table (SDBTs) allocated at event
initialization. Both buffers are of PAGE_SIZE bytes. Each SDBT
consists of 512 entries. The first 511 entries point to SDBs
the last entry points to a successor SDBT. The last SDBT in
the list points to the origin of all SDBTs. SDBTs do not
contain holes, that is an entry always points to a SDB.
If less than 511 SDBs have been allocation, the last entry
points to the origin SDBT.
Simplify the release of the SDBs and SDBTs, walk along the
SDBT chain, release SDBs and SDBTs and stop when reaching
the origin again.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If the page has been exported, do not re-import it. Imports should
only be triggered by the guest. The guest will import the page
automatically when it will need it again, there is no advantage in
importing it manually.
Moreover, vfio_pin_pages() will take an extra reference on the page and
thus will cause the import to always fail. The extra reference would be
dropped only after pointlessly trying to import the page.
Fixes: f88fb1335733 ("s390/vfio-ap: make sure nib is shared")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20241115135611.87836-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch_stack_walk_user_common() contains a return statement instead of a
break statement in case store_ip() fails while trying to store a callchain
entry of a user space process.
This may lead to a missing pagefault_enable() call.
If this happens any subsequent page fault of the process won't be resolved
by the page fault handler and this in turn will lead to the process being
killed.
Use a break instead of a return statement to fix this.
Fixes: ebd912ff9919 ("s390/stacktrace: Merge perf_callchain_user() and arch_stack_walk_user()")
Cc: stable@vger.kernel.org
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit b3e5dc45fd1e ("s390/mm: fix local TLB flushing vs.
detach of an mm address space") __tlb_flush_mm() does not flush
local CPU, but the comment suggests it does, which is misleading.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The s390dbf format handler rely on being passed an output buffer sized
such that their output will always fit and then use plain sprintf() to
write to it. While only supplied data from other kernel components this
still potentially allows buffer overwrite if callers are not careful.
Instead just pass in the size of the output buffer and use scnprintf()
instead of sprintf() and strscpy() instead of strcpy(). The latter also
allows us to get rid of a separate strlen() call.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A driver might allow the mmap access before initializing its
runtime->dma_area properly. Add a proper NULL check before passing to
virt_to_page() for avoiding a panic.
Reported-by: syzbot+4bf62a7b1d0f4fdb7ae2@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241120141104.7060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Update the hyperlink as it currently redirects to a generic site
instead of the actual specification.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Link: https://patch.msgid.link/20241120155553.21099-1-hridesh699@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #2
- Constrain invalidations from GICR_INVLPIR to only affect the LPI
INTID space
- Set of robustness improvements to the management of vgic irqs and GIC
ITS table entries
- Fix compilation issue w/ CONFIG_CC_OPTIMIZE_FOR_SIZE=y where
set_sysreg_masks() wasn't getting inlined, breaking check for a
constant sysreg index
- Correct KVM's vPMU overflow condition to match the architecture for
hyp and non-hyp counters
|
|
Fix the inverted check for security_sb_show_options().
Link: https://lore.kernel.org/r/c8eaa647-5d67-49b6-9401-705afcb7e4d7@stanley.mountain
Link: https://lore.kernel.org/r/20241120-verehren-rhabarber-83a11b297bcc@brauner
Fixes: aefff51e1c29 ("statmount: retrieve security mount options")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move common code from opt_array/opt_sec_array to helper. This helper
does more than just unescape options, so rename to
statmount_opt_process().
Handle corner case of just a single character in options.
Rename some local variables to better describe their function.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20241120142732.55210-1-mszeredi@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Brian Foster <bfoster@redhat.com> says:
Here's v4 of the zero range flush improvements. No real major changes
here, mostly minor whitespace, naming issues, etc.
* patches from https://lore.kernel.org/r/20241115200155.593665-1-bfoster@redhat.com:
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
Link: https://lore.kernel.org/r/20241115200155.593665-1-bfoster@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove duplicate included header file linux/uio.h
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240628062329.321162-2-thorsten.blum@toblux.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap zero range flushes pagecache in certain situations to
determine which parts of the range might require zeroing if dirty
data is present in pagecache. The kernel robot recently reported a
regression associated with this flushing in the following stress-ng
workload on XFS:
stress-ng --timeout 60 --times --verify --metrics --no-rand-seed --metamix 64
This workload involves repeated small, strided, extending writes. On
XFS, this produces a pattern of post-eof speculative preallocation,
conversion of preallocation from delalloc to unwritten, dirtying
pagecache over newly unwritten blocks, and then rinse and repeat
from the new EOF. This leads to repetitive flushing of the EOF folio
via the zero range call XFS uses for writes that start beyond
current EOF.
To mitigate this problem, special case EOF block zeroing to prefer
zeroing the folio over a flush when the EOF folio is already dirty.
To do this, split out and open code handling of an unaligned start
offset. This brings most of the performance back by avoiding flushes
on zero range calls via write and truncate extension operations. The
flush doesn't occur in these situations because the entire range is
post-eof and therefore the folio that overlaps EOF is the only one
in the range.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-4-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation for special handling of subranges, lift the zeroed
mapping logic from the iterator into the caller. Since this puts the
pagecache dirty check and flushing in the same place, streamline the
comments a bit as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-3-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap_iter_advance() zeroes the processed and mapping fields on
every non-error iteration except for the last expected iteration
(i.e. return 0 expected to terminate the iteration loop). This
appears to be circumstantial as nothing currently relies on these
fields after the final iteration.
Therefore to better faciliate iomap_iter reuse in subsequent
patches, update iomap_iter_advance() to always reset per-iteration
state on successful completion.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-2-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap_zero_range() uses buffered writes for manual zeroing, no
longer updates i_size for such writes, but is still explicitly
called for post-eof ranges. The historical use case for this is
zeroing post-eof speculative preallocation on extending writes from
XFS. However, XFS also recently changed to convert all post-eof
delalloc mappings to unwritten in the iomap_begin() handler, which
means it now never expects manual zeroing of post-eof mappings. In
other words, all post-eof mappings should be reported as holes or
unwritten.
This is a subtle dependency that can be hard to detect if violated
because associated codepaths are likely to update i_size after folio
locks are dropped, but before writeback happens to occur. For
example, if XFS reverts back to some form of manual zeroing of
post-eof blocks on write extension, writeback of those zeroed folios
will now race with the presumed i_size update from the subsequent
buffered write.
Since iomap_zero_range() can't correctly zero post-eof mappings
beyond EOF without updating i_size, warn if this ever occurs. This
serves as minimal indication that if this use case is reintroduced
by a filesystem, iomap_zero_range() might need to reconsider i_size
updates for write extending use cases.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115145931.535207-1-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Setting GPIO direction = high, sometimes results in GPIO value = 0.
If a GPIO is pulled high, the following construction results in the
value being 0 when the desired value is 1:
$ echo "high" > /sys/class/gpio/gpio336/direction
$ cat /sys/class/gpio/gpio336/value
0
Before the GPIO direction is changed from an input to an output,
exar_set_value() is called with value = 1, but since the GPIO is an
input when exar_set_value() is called, _regmap_update_bits() reads a 1
due to an external pull-up. regmap_set_bits() sets force_write =
false, so the value (1) is not written. When the direction is then
changed, the GPIO becomes an output with the value of 0 (the hardware
default).
regmap_write_bits() sets force_write = true, so the value is always
written by exar_set_value() and an external pull-up doesn't affect the
outcome of setting direction = high.
The same can happen when a GPIO is pulled low, but the scenario is a
little more complicated.
$ echo high > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1
$ echo in > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
0
$ echo low > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1
Fixes: 36fb7218e878 ("gpio: exar: switch to using regmap")
Co-developed-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Sai Kumar Cholleti <skmr537@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241105071523.2372032-1-skmr537@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
During conversion driver to modern APIs the base field initial value
of the GPIO chip was moved from -1 to 0, which triggers a warning.
Add missed base initialisation as it was in the original code.
Initialise the GPIO chip label correctly as it was done by
of_mm_gpiochip_add_data() before the below mentioned change.
Fixes: 50dded8d9d62 ("gpio: altera: Drop legacy-of-mm-gpiochip.h header")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241118095402.516989-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Initialise the GPIO chip label correctly as it was done by
of_mm_gpiochip_add_data() before the below mentioned change.
Fixes: cf8f4462e5fa ("gpio: zevio: drop of_gpio.h header")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241118092729.516736-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Pull in the fixes branch to resolve conflict in UFS core.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 'global enable control' (as it is termed in the architecture) for
counters reserved by EL2 is MDCR_EL2.HPME. Use that instead of
PMCR_EL0.E when evaluating the overflow state for hyp counters.
Change the return value to a bool while at it, which better reflects the
fact that the overflow state is a shared signal and not a per-counter
property.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates
to true if any counter's global enable (PMCR_EL0.E), overflow flag
(PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1.
Of note, this does not require a counter to be enabled
(i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow.
Align kvm_pmu_overflow_status() with the reality of the architecture
and stop using PMCNTENSET_EL0 as part of the overflow condition. The
bug was discovered while running an SBSA PMU test [*], which only sets
PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt.
Cc: stable@vger.kernel.org
Fixes: 76d883c4e640 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register")
Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[ oliver: massaged changelog ]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When compiling with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, set_sysreg_masks()
fails to compile thanks to:
BUILD_BUG_ON(!__builtin_constant_p(sr));
as the compiler doesn't identify sr as a constant, despite all the
callers passing constants.
Fix the issue by always inlining this function, which allows GCC to
do the right thing.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411201857.ZNudtGJl-lkp@intel.com/
Fixes: a0162020095e2 ("KVM: arm64: Extend masking facility to arbitrary registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20241120111516.304250-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ITS ABI infrastructure allows for some pretty lax code, where
the size of the data doesn't have to match the size of the entry,
potentially leading to a collection of interesting bugs.
Commit 7fe28d7e68f9 ("KVM: arm64: vgic-its: Add a data length check
in vgic_its_save_*") added some checks, but starts by implicitly
casting all writes to a 64bit value, hiding some of the issues.
Instead, introduce macros that will check the data type actually used
for dealing with the table entries. The macros are taking a symbolic
entry type that is used to fetch the size of the entry type for the
current ABI. This immediately catches a couple of low-impact gotchas
(zero values that are implicitly 32bit), easy enough to fix.
Given that we currently only have a single ABI, hardcode a couple of
BUILD_BUG_ON()s that will fire if we use anything but a 64bit quantity,
and some (currently unreachable) fallback code that may become useful
one day.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
VGIC_MAX_PRIVATE is a pretty useless definition, and is better
replaced with VGIC_NR_PRIVATE_IRQS.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_get_irq() has an awkward signature, as it takes both a kvm
*and* a vcpu, where the vcpu is allowed to be NULL if the INTID
being looked up is a global interrupt (SPI or LPI).
This leads to potentially problematic situations where the INTID
passed is a private interrupt, but that there is no vcpu.
In order to make things less ambiguous, let have *two* helpers
instead:
- vgic_get_irq(struct kvm *kvm, u32 intid), which is only concerned
with *global* interrupts, as indicated by the lack of vcpu.
- vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid), which can
return *any* interrupt class, but must have of course a non-NULL
vcpu.
Most of the code nicely falls under one or the other situations,
except for a couple of cases (close to the UABI or in the debug code)
where we have to distinguish between the two cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Make sure we filter out non-LPI invalidation when handling writes
to GICR_INVLPIR.
Fixes: 4645d11f4a553 ("KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241117165757.247686-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The SoC specific code updates for 6.13 are fairly minimal.
One Broadcom SoC model gains automatic configuration for the debug
uarg as we have on many other machines, the remaining changes are
trivial cleanups"
* tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx: Switch to new sys-off handler API
ARM: bcm: brcmstb: Drop custom init_irq callback
ARM: bcm: Support BCMBCA debug UART
ARM: zynq: Remove unused zynq_slcr_init() declaration
ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio
ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a few newly added device drivers get enabled in the arm32
multi_v7_defconfig and arm64 defconfig as well as a few of the SoC
specific config files.
The main visible change is the inclusion of (reduced) debug info by
default in the 32-bit defconfig"
* tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E
arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3
arm64: defconfig: Enable PCF857X GPIO expander
arm64: defconfig: Enable sc7280 clock controllers
ARM: configs: at91: enable PAC1934 driver as module
ARM: multi_v7_defconfig: Enable debugging symbols by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
Pull OpenRISC update from Stafford Horne:
"A single fixup from me: Fix bug with earlycon being broken due to
removal of early_ioremap"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Implement fixmap to fix earlycon
|
|
Pull microblaze updates from Michal Simek:
- Export xmb_manager functions
- Remove empty #ifndef __ASSEMBLY__ statement
- Use str_yes_no() helper in show_cpuinfo()
* tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: mb: Use str_yes_no() helper in show_cpuinfo()
microblaze: Remove empty #ifndef __ASSEMBLY__ statement
microblaze: Export xmb_manager functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE update from Fan Wu:
"One commit from Colin Ian King, which removes unnecessary error
handling code in the IPE boot policy generation helper program"
* tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
scripts: ipe: polgen: remove redundant close and error exit path
|
|
Add the SPI-NAND controller on the RTL9300 family of devices. This
supports serial/dual/quad data width and DMA for read/program
operations.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij)
This will make it easier to port arm32 to the generic entry code.
* tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Just some cleanups and bug fixes this time around:
- Align handling of the compiled-in command line with the core kernel
- Measure the initrd into the TPM also when it was loaded via the EFI
file I/O protocols
- Clean up TPM event log handling
- Sanity check the EFI memory attributes table, and apply it after
kexec too
- Assorted other fixes"
* tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Fix memory leak in efivar_ssdt_load
efi/libstub: Take command line overrides into account for loaded files
efi/libstub: Fix command line fallback handling when loading files
efi/libstub: Parse builtin command line after bootloader provided one
x86/efi: Apply EFI Memory Attributes after kexec
x86/efi: Drop support for the EFI_PROPERTIES_TABLE
efi/memattr: Ignore table if the size is clearly bogus
efi/zboot: Fix outdated comment about using LoadImage/StartImage
efi/libstub: Free correct pointer on failure
libstub,tpm: do not ignore failure case when reading final event log
tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size
tpm: do not ignore memblock_reserve return value
tpm: fix signed/unsigned bug when checking event logs
efi/libstub: measure initrd to PCR9 independent of source
efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline()
efi/libstub: fix efi_parse_options() ignoring the default command line
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
- uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in
uvc_parse_format
* tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- removal of the old omap4iss media driver
- mantis: remove orphan mantis_core.h
- add support for Raspberypi CFE
- uvc driver got a co-maintainer
- main media tree moved to git://linuxtv.org/media.git
- lots of driver cleanups, updates and fixes
* tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits)
docs: media: update location of the media patches
MAINTAINERS: update location of media main tree
media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer
media: platform: samsung: s5p-jpeg: Remove deadcode
media: qcom: camss: Add MSM8953 resources
media: dt-bindings: Add qcom,msm8953-camss
media: qcom: camss: implement pm domain ops for VFE v4.1
media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
media: adv7180: Also check for "adi,force-bt656-4"
media: dt-bindings: adv7180: Document 'adi,force-bt656-4'
media: mgb4: Fix inconsistent input/output alignment in loopback mode
media: replace obsolete hans.verkuil@cisco.com alias
Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc
media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls
media: atomisp: Add check for rgby_data memory allocation failure
media: atomisp: remove redundant re-checking of err
media: atomisp: Fix spelling errors reported by codespell
media: atomisp: Remove License information boilerplate
media: atomisp: Fix typos in comment
media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- improvement in the way hid-bpf coexists with specific drivers (others
than hid-generic) that are already bound to devices (Benjamin
Tissoires)
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He
Lugang)
- assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
Yan Zhen, Nathan Chancellor, Andy Shevchenko)
- support for Corsair Void headset family (Stuart Hayhurst)
- Support for Goodix GT7986U SPI (Charles Wang)
- initial vendor-specific driver for Kysona, currently adding support
for Kysona M600 (Lode Willems)
- other assorted code cleanups and small bugfixes all over the place
* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
HID: multitouch: make mt_set_mode() less cryptic
HID: hid-goodix-spi: Add OF supports
dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
HID: hyperv: streamline driver probe to avoid devres issues
HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
HID: rmi: Add select RMI4_F3A in Kconfig
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
HID: steelseries: Add capacity_level mapping
HID: steelseries: Fix battery requests stopping after some time
HID: hid-goodix: Fix HID get/set feature operation overwritten problem
HID: hid-goodix: Return 0 when receiving an empty HID feature package
HID: bpf: drop use of Logical|Physical|UsageRange
HID: bpf: Fix Rapoo M50 Plus Silent side buttons
HID: bpf: Fix NKRO on Mistel MD770
HID: replace BUG_ON() with WARN_ON()
HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
HID: Kysona: add basic online status
HID: Kysona: check battery status every 5s using a workqueue
HID: Kysona: Add basic battery reporting for Kysona M600
HID: Add IDs for Kysona
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay update from Andy Shevchenko:
- Move Holtek 16k33 driver to use agnostic i2c_get_match_data()
- Miscellaneuous cleanups
* tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: Remove unused functions
auxdisplay: ht16k33: Make use of i2c_get_match_data()
auxdisplay: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
- Add support for Ultra High-Speed II SD cards (UHS-II)
- Use a reset control for pwrseq_simple
- Add SD card quirk for broken poweroff notification
- Use GFP_NOIO for SD ACMD22
MMC host:
- bcm2835: Introduce proper clock handling
- mtk-sd: Add support for the Host-Software-Queue interface
- mtk-sd: Add support for the mt7988/mt8196 variants
- mtk-sd: Fix a couple of error paths in ->probe()
- sdhci: Add interface to support UHS-II SD cards
- sdhci_am654: Fixup support for changing the signal voltage level
- sdhci-cadence: Add support for the Microchip PIC64GX variant
- sdhci-esdhc-imx: Add support for eMMC HW-reset
- sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
- sdhci-of-arasan: Add support for eMMC HW-reset
- sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants
MEMSTICK:
- A couple of minor updates"
* tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits)
mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly
mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting
mmc: mtk-sd: Fix error handle of probe function
mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II
mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask
mmc: sdhci-esdhc-imx: Implement emmc hardware reset
mmc: core: Correct type in variable assignment for UHS-II
mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument
mmc: sdhci-uhs2: Remove unnecessary variables
mmc: sdhci-uhs2: Correct incorrect type in argument
mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible
mmc: sdhci-uhs2: Remove unnecessary NULL check
mmc: core: Fix error paths for UHS-II card init and re-init
mmc: core: Add error handling of sd_uhs2_power_up()
mmc: core: Simplify sd_uhs2_power_up()
mmc: bcm2835: Introduce proper clock handling
mmc: bcm2835: Fix type of current clock speed
dt-bindings: mmc: Add sdhci compatible for QCS615
mmc: core: Use GFP_NOIO in ACMD22
dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
- extend support for the wcn6855 model in the pwrseq-qcom-wcn driver
- make this driver depend on CONFIG_OF=y as it uses some very
OF-specific interfaces and depends on phandle parsing
* tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: improve support for wcn6855
power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Three new drivers, support for some new models in existing ones and
lots of various tweaks and improvements across the board (switching to
using recommended APIs, code shrink and simplification, etc.).
Also a new feature in the character device uAPI where we now notify
the user-space about changes triggered by in-kernel users as well, not
only when they were done by other user-space agents.
Summary:
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO
descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for
consistency with other places
- modify the behavior of the sysfs interface by no longer exporting
lines that are named inside the driver code or board files with the
sysfs links bearing the line names as this has for many years been
largely unused due to the prevalence of DT, ACPI and firmware nodes
over board files and made the API inconsistent
- for GPIO interrupt providers: free irqs that are still requested by
users when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested,
released, reconfigured) triggered from the kernel as well (until
now we'd only do this for changes triggered from user-space)
- to that end: modify the internal workings of the notification
mechanism by switching to an atomic notifier which allows us to
send events from atomic context
- also to that end store the debounce period in the GPIO descriptor
struct and not in the character device context struct
- while at it, also cover the corner-case of users introducing
changes over sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to
user-space as it can still request them as GPIOs
New drivers:
- GPIO part of the MFD Congatec Board Controller
- PolarFire GPIO controller
- GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones
across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or
entirely remove the driver's remove() callback (grgpio, amdpt,
menz127, max730x, ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid
some line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the
fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and
gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the
conversion to remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
this deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in
gpiolib-of and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to
gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools"
* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
gpio: tegra186: Allow to enable driver on Tegra234
gpio: grgpio: Add NULL check in grgpio_probe
tools: gpio: Fix several incorrect format specifiers
gpio: mpfs: add CoreGPIO support
gpio: rockchip: support new version GPIO
gpio: rockchip: change the GPIO version judgment logic
gpio: rockchip: explan the format of the GPIO version ID
gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
MAINTAINERS: add gpio driver to PolarFire entry
gpio: Get rid of GPIOF_ACTIVE_LOW
USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
leds: gpio: Avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
gpio: Use of_property_present() for non-boolean properties
gpio: mpfs: add polarfire soc gpio support
gpio: altera: Drop legacy-of-mm-gpiochip.h header
gpio: pcie-idio-24: Replace deprecated PCI functions
gpio: pci-idio-16: Replace deprecated PCI functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains a new abstraction for PWM waveforms that is more
expressive that the legacy one. Compared to the old abstraction it
contains a duty_offset member instead of polarity. This new
abstraction is already used in an ADC driver merged into the iio tree.
The new API requires changes to the lowlevel drivers. For now there
are two drivers that are converted to the new API (axi-pwmgen and
stm32). Converted drivers continue to work with the old API. Drivers
not yet converted only work with the older API.
Otherwise it's the usual collection of fixes, cleanups and dt doc
updates.
This time around thanks go to Andy Shevchenko, Clark Wang, Conor
Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang,
Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code
contributions, testing and review"
* tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Assume a disabled PWM to emit a constant inactive output
pwm: core: export pwm_get_state_hw()
pwm: core: use device_match_name() instead of strcmp(dev_name(...
dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3
pwm: imx27: Use clk_bulk_*() API to simplify clock handling
pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle
pwm: axi-pwmgen: Enable FORCE_ALIGN by default
pwm: axi-pwmgen: Rename 0x10 register
dt-bindings: pwm: amlogic: Document C3 PWM
pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip
pwm: atmel-tcb: Use min() macro
pwm: stm32: Fix error checking for a regmap_read() call
pwm: Add kernel doc for members added to pwm_ops recently
pwm: Reorder symbols in core.c
pwm: stm32: Implementation of the waveform callbacks
pwm: axi-pwmgen: Implementation of the waveform callbacks
pwm: Add tracing for waveform callbacks
pwm: Provide new consumer API functions for waveforms
pwm: New abstraction for PWM waveforms
pwm: Add more locking
|
