| Age | Commit message (Collapse) | Author |
|---|
|
The len variable is not initialized, which may cause the for loop to
behave unexpectedly.
Fixes: 9b25419ad397 ("i2c: amd-asf: Add routine to handle the ASF slave process")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
|
|
Mark Maddy as a co-maintainer, so that he can get a kernel.org account
and help manage the powerpc tree on kernel.org.
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241115045442.675721-1-mpe@ellerman.id.au
|
|
When in fatal error condition, mark device as detached first
and then complete all pending HWRM commands as firmware is not
going to process them and eventually time out. Move the device
to error only if suspend is called when device is in Fatal state.
Also, remove some outdated comments. Remove the stop_irq call
which is no longer required.
Fixes: cc5b9b48d447 ("RDMA/bnxt_re: Recover the device when FW error is detected")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Instead of driver setting the congestion mode, use
the default values setup by Firmware. Enable the tos_ecn
field in FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Adding support for different traffic class passed
to driver. Fix the traffic class setting in modify_qp
by skipping the ECN bits. Pass the service level received
from applications to the firmware.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A DREQ is sent in 2 situations:
1. When requested by the user.
This DREQ has to wait for a DREP, which will be routed to the user.
2. When the cm_id is destroyed.
This DREQ is generated by the CM to notify the peer that the
connection has been destroyed.
In the latter case, any DREP that is received will be discarded.
There's no need to hold a reference on the cm_id. Today, both
situations are covered by the same function: cm_send_dreq_locked().
When invoked in the cm_id destroy path, the cm_id reference would be
held until the DREQ completes, blocking the destruction. Because it
could take several seconds to minutes before the DREQ receives a DREP,
the destroy call posts a send for the DREQ then immediately cancels the
MAD. However, cancellation is not immediate in the MAD layer. There
could still be a delay before the MAD layer returns the DREQ to the CM.
Moreover, the only guarantee is that the DREQ will be sent at most once.
Introduce a separate flow for sending a DREQ when destroying the cm_id.
The new flow will not hold a reference on the cm_id, allowing it to be
cleaned up immediately. The cancellation trick is no longer needed.
The MAD layer will send the DREQ exactly once.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/a288a098b8e0550305755fd4a7937431699317f4.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Typically, when the CM sends a MAD it bumps a reference count
on the associated cm_id. There are some exceptions, such
as when the MAD is a direct response to a receive MAD. For
example, the CM may generate an MRA in response to a duplicate
REQ. But, in general, if a MAD may be sent as a result of
the user invoking an API call (e.g. ib_send_cm_rep(),
ib_send_cm_rtu(), etc.), a reference is taken on the cm_id.
This reference is necessary if the MAD requires a response.
The reference allows routing a response MAD back to the
cm_id, or, if no response is received, allows updating the
cm_id state to reflect the failure.
For MADs which do not generate a response from the
target, however, there's no need to hold a reference on the cm_id.
Such MADs will not be retried by the MAD layer and their
completions do not change the state of the cm_id.
There are 2 internal calls used to allocate MADs which take
a reference on the cm_id: cm_alloc_msg() and cm_alloc_priv_msg().
The latter calls the former. It turns out that all other places
where cm_alloc_msg() is called are for MADs that do not generate
a response from the target: sending an RTU, DREP, REJ, MRA, or
SIDR REP. In all of these cases, there's no need to hold a
reference on the cm_id.
The benefit of dropping unneeded references is that it allows
destruction of the cm_id to proceed immediately. Currently,
the cm_destroy_id() call blocks as long as there's a reference
held on the cm_id. Worse, is that cm_destroy_id() will send
MADs, which it then needs to complete. Sending the MADs is
beneficial, as they notify the peer that a connection is
being destroyed. However, since the MADs hold a reference
on the cm_id, they block destruction and cannot be retried.
Move cm_id referencing from cm_alloc_msg() to cm_alloc_priv_msg().
The latter should hold a reference on the cm_id in all cases but
one, which will be handled in a separate patch. cm_alloc_priv_msg()
is used when sending a REQ, REP, DREQ, and SIDR REQ, all of which
require a response.
Also, merge common code into cm_alloc_priv_msg() and combine the
freeing of all messages which do not need a response.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1f0f96acace72790ecf89087fc765dead960189e.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In several situations the CM may send a reply to a received MAD
without the reply being directly linked with a cm_id. For
example, it may send a REJ in response to a REQ which does not
match a listener. Or, it may send a DREP in response to a DREQ
if the cm_id has already been destroyed. This can happen if the
original DREP was lost and the DREQ was retried.
When such a response MAD completes, it updates a counter tracking
how many MADs were retried. However, not all response MADs issued
directly by the CM may be retries. The REJ mentioned in the example
above is such a case. To distinguish between responses which were
retries versus those that are not, the send_handler performs the
following check: is a retry if the response is not associated with
a cm_id and the response is not a REJ message.
Replace this indirect method of checking if a response is a retry
with an explicit check. Note that these retries are generated
directly by the CM, rather than retried by the MAD layer.
This change will be needed by later changes which would otherwise
break the indirect check.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1ee6e2a68f8de1992b9da23aa1d7e3f9f25e0036.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When we load SSDT from efi variable (specified with efivar_ssdt=<var>
boot command line argument) a name for the variable is allocated
dynamically because we traverse all EFI variables. Unlike ACPI table
data, which is later used by ACPI engine, the name is no longer needed
once traverse is complete -- don't forget to free this memory.
Same time we silently ignore any errors happened here let's print a
message if something went wrong (but do not exit since this is not a
critical error and the system should continue to boot).
Also while here -- add a note why we keep SSDT table on success.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When CONFIG_CMDLINE_OVERRIDE or CONFIG_CMDLINE_FORCE are configured, the
command line provided by the boot stack should be ignored, and only the
built-in command line should be taken into account.
Add the required handling of this when dealing with initrd= or dtb=
command line options in the EFI stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
CONFIG_CMDLINE, when set, is supposed to serve either as a fallback when
no command line is provided by the bootloader, or to be taken into account
unconditionally, depending on the configured options.
The initrd and dtb loader ignores CONFIG_CMDLINE in either case, and
only takes the EFI firmware provided load options into account. This
means that configuring the kernel with initrd= or dtb= on the built-in
command line does not produce the expected result.
Fix this by doing a separate pass over the built-in command line when
dealing with initrd= or dtb= options.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
|
|
Revert d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()") as
suggested by Chuck [1]. It is causing deadlocks when accessing tmpfs over
NFS.
As Hugh commented, "added just to silence a syzbot sanitizer splat: added
where there has never been any practical problem".
Link: https://lkml.kernel.org/r/ZzdxKF39VEmXSSyN@tissot.1015granger.net [1]
Fixes: d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull ARM fixes from Russell King:
- Fix kernel mapping for XIP kernels
- Fix SMP support for XIP kernels
- Fix complication corner case with CFI
- Fix a typo in nommu code
- Fix cacheflush syscall when PAN is enabled on LPAE platforms
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: fix cacheflush with PAN
ARM: 9435/1: ARM/nommu: Fix typo "absence"
ARM: 9434/1: cfi: Fix compilation corner case
ARM: 9420/1: smp: Fix SMP for xip kernels
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
|
|
Pull drm fix from Dave Airlie:
"Alex sent on a last minute revert for a amdgpu/swsmu regression:
- revert patch to fix swsmu regression"
* tag 'drm-fixes-2024-11-17' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/pm: correct the workload setting"
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-11-16:
amdgpu:
- Revert a swsmu patch to fix a regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241116145320.2507156-1-alexander.deucher@amd.com
|
|
The hash_combine() could be trapped when compiled with sanitizer like "zig cc"
or clang with signed-integer-overflow option. This patch parameters and return
type to unsigned long to remove the potential overflow.
Signed-off-by: Sidong Yang <sidong.yang@furiosa.ai>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241116081054.65195-1-sidong.yang@furiosa.ai
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring buffer fixes from Steven Rostedt:
- Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU
hotplug"
A crash that happened on cpu hotplug was actually caused by the
incorrect ref counting that was fixed by commit 2cf9733891a4
("ring-buffer: Fix refcount setting of boot mapped buffers"). The
removal of calling cpu hotplug callbacks on memory mapped buffers was
not an issue even though the tests at the time pointed toward it. But
in fact, there's a check in that code that tests to see if the
buffers are already allocated or not, and will not allocate them
again if they are. Not calling the cpu hotplug callbacks ended up not
initializing the non boot CPU buffers.
Simply remove that change.
- Clear all CPU buffers when starting tracing in a boot mapped buffer
To properly process events from a previous boot, the address space
needs to be accounted for due to KASLR and the events in the buffer
are updated accordingly when read. This also requires that when the
buffer has tracing enabled again in the current boot that the buffers
are reset so that events from the previous boot do not interact with
the events of the current boot and cause confusing due to not having
the proper meta data.
It was found that if a CPU is taken offline, that its per CPU buffer
is not reset when tracing starts. This allows for events to be from
both the previous boot and the current boot to be in the buffer at
the same time. Clear all CPU buffers when tracing is started in a
boot mapped buffer.
* tag 'trace-ringbuffer-v6.12-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/ring-buffer: Clear all memory mapped CPU ring buffers on first recording
Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU hotplug"
|
|
This operation is used by alienware-wmi driver to avoid brute-forcing
operation 0x03.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183639.14726-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
WMAX_METHOD_THERMAL_INFORMATION has a *system description* operation
that outputs a buffer with the following structure:
out[0] -> Number of fans
out[1] -> Number of sensors
out[2] -> 0x00
out[3] -> Number of thermal modes
This is now used by create_thermal_profile() to retrieve available thermal
codes instead of brute-forcing every ID.
Tested on an Alienware x15 R1. Verified by checking ACPI tables of
supported models.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183623.14691-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds support to Alienware x17 R2
Tested-by: Samith Castro <SamithNarayam@hotmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183609.14653-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds thermal + gmode quirk to:
- Dell G15 5510
- Dell G15 5511
- Dell G15 5515
- Dell G3 3500
- Dell G3 3590
- Dell G5 5500
Adds thermal quirk to:
- Alienware m18 R2
- Alienware m17 R5 AMD
Support for these models was manually verified by reading their
respective ACPI tables.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183546.14617-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
alienware_quirks[] entries are now ordered alphabetically
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183520.14573-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Xuan Zhuo says:
====================
virtio-net: support AF_XDP zero copy (tx)
XDP socket(AF_XDP) is an excellent bypass kernel network framework. The zero
copy feature of xsk (XDP socket) needs to be supported by the driver. The
performance of zero copy is very good. mlx5 and intel ixgbe already support
this feature, This patch set allows virtio-net to support xsk's zerocopy xmit
feature.
At present, we have completed some preparation:
1. vq-reset (virtio spec and kernel code)
2. virtio-core premapped dma
3. virtio-net xdp refactor
So it is time for Virtio-Net to complete the support for the XDP Socket
Zerocopy.
Virtio-net can not increase the queue num at will, so xsk shares the queue with
kernel.
This patch set includes some refactor to the virtio-net to let that to support
AF_XDP.
The current configuration sets the virtqueue (vq) to premapped mode,
implying that all buffers submitted to this queue must be mapped ahead
of time. This presents a challenge for the virtnet send queue (sq): the
virtnet driver would be required to keep track of dma information for vq
size * 17, which can be substantial. However, if the premapped mode were
applied on a per-buffer basis, the complexity would be greatly reduced.
With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel
skb buffers could remain unmapped.
We can distinguish them by sg_page(sg), When sg_page(sg) is NULL, this
indicates that the driver has performed DMA mapping in advance, allowing
the Virtio core to directly utilize sg_dma_address(sg) without
conducting any internal DMA mapping. Additionally, DMA unmap operations
for this buffer will be bypassed.
ENV: Qemu with vhost-user(polling mode).
Host CPU: Intel(R) Xeon(R) Platinum 8163 CPU @ 2.50GHz
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 19531092064 RX-missed: 0 RX-bytes: 1093741155584
RX-errors: 0
RX-nombuf: 0
TX-packets: 5959955552 TX-errors: 0 TX-bytes: 371030645664
Throughput (since last show)
Rx-pps: 8861574 Rx-bps: 3969985208
Tx-pps: 8861493 Tx-bps: 3969962736
############################################################################
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 68152727 RX-missed: 0 RX-bytes: 3816552712
RX-errors: 0
RX-nombuf: 0
TX-packets: 68114967 TX-errors: 33216 TX-bytes: 3814438152
Throughput (since last show)
Rx-pps: 6333196 Rx-bps: 2837272088
Tx-pps: 6333227 Tx-bps: 2837285936
############################################################################
But AF_XDP consumes more CPU for tx and rx napi(100% and 86%).
====================
Link: https://patch.msgid.link/20241112012928.102478-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, we support AF_XDP(xsk). Add NETDEV_XDP_ACT_XSK_ZEROCOPY to
xdp_features.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-14-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If send queue sent some packets, we update the tx timeout
record to prevent the tx timeout.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-13-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver's tx napi is very important for XSK. It is responsible for
obtaining data from the XSK queue and sending it out.
At the beginning, we need to trigger tx napi.
virtnet_free_old_xmit distinguishes three type ptr(skb, xdp frame, xsk
buffer) by the last bits of the pointer.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-12-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since xsk's TX queue is consumed by TX NAPI, if sq is bound to xsk, then
we must stop tx napi from being disabled.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-11-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch implement the logic of bind/unbind xsk pool to sq and rq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-10-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because the af-xdp will introduce a new xmit type, so I refactor the
xmit type mechanism first.
We know both xdp_frame and sk_buff are at least 4 bytes aligned.
For the xdp tx, we do not pass any pointer to virtio core as data,
we just need to pass the len of the packet. So we will push len
to the void pointer. We can make sure the pointer is 4 bytes aligned.
And the data structure of AF_XDP also is at least 4 bytes aligned.
So the last two bits of the pointers are free, we can't use these to
distinguish them.
00 for skb
01 for SKB_ORPHAN
10 for XDP
11 for AF-XDP tx
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-9-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, this API is useless. remove it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-8-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtio-net rq submits premapped per-buffer by setting sg page to NULL;
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-7-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two APIs are introduced to submit premapped per-buffers.
int virtqueue_add_inbuf_premapped(struct virtqueue *vq,
struct scatterlist *sg, unsigned int num,
void *data,
void *ctx,
gfp_t gfp);
int virtqueue_add_outbuf_premapped(struct virtqueue *vq,
struct scatterlist *sg, unsigned int num,
void *data,
gfp_t gfp);
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-6-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current configuration sets the virtqueue (vq) to premapped mode,
implying that all buffers submitted to this queue must be mapped ahead
of time. This presents a challenge for the virtnet send queue (sq): the
virtnet driver would be required to keep track of dma information for vq
size * 17, which can be substantial. However, if the premapped mode were
applied on a per-buffer basis, the complexity would be greatly reduced.
With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel
skb buffers could remain unmapped.
And consider that some sgs are not generated by the virtio driver,
that may be passed from the block stack. So we can not change the
sgs, new APIs are the better way.
So we pass the new argument 'premapped' to indicate the buffers
submitted to virtio are premapped in advance. Additionally,
DMA unmap operations for these buffers will be bypassed.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-5-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent commit needs to know whether every indirect buffer is
premapped or not. So we need to introduce an extra struct for every
indirect buffer to record this info.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-4-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent commit needs to know whether every indirect buffer is
premapped or not. So we need to introduce an extra struct for every
indirect buffer to record this info.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make the code readable, introduce vring_need_unmap_buffer() to
replace do_unmap.
use_dma_api premapped -> vring_need_unmap_buffer()
1. false false false
2. true false true
3. true true false
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)
For ice:
Mateusz refactors and adds additional SerDes configuration values to be
output.
Przemek refactors processing of DDP and adds support for a flag field in
the DDP's signature segment header.
Joe Damato adds support for persistent NAPI config.
Brett adjusts setting of Tx promiscuous based on unicast/multicast
setting.
Jake moves setting of pf->supported_rxdids to occur directly after DDP
load and changes a small struct to use stack memory.
Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue.
For ixgbe:
Diomidis Spinellis removes a circular dependency.
For igc:
Vitaly removes an unneeded autoneg parameter.
For igb:
Johnny Park fixes a couple of typos.
For igbvf:
Wander Lairson Costa removes an unused spinlock.
For e1000:
Joe Damato adds RTNL lock to some calls where it is expected to be held.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000: Hold RTNL when e1000_down can be called
igbvf: remove unused spinlock
igb: Fix 2 typos in comments in igb_main.c
igc: remove autoneg parameter from igc_mac_info
ixgbe: Break include dependency cycle
ice: Unbind the workqueue
ice: use stack variable for virtchnl_supported_rxdids
ice: initialize pf->supported_rxdids immediately after loading DDP
ice: only allow Tx promiscuous for multicast
ice: Add support for persistent NAPI config
ice: support optional flags in signature segment header
ice: refactor "last" segment of DDP pkg
ice: extend dump serdes equalizer values feature
ice: rework of dump serdes equalizer values feature
====================
Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
net: ndo_fdb_add/del: Have drivers report whether they notified
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own.
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a parameter, bool *notified, to
ndo_fdb_add and ndo_fdb_del. The flag is primed to false, and if the callee
sends a notification on its own, it sets the flag to true, thus informing
the core that it should not generate another notification.
Patches #1 to #2 are concerned with the above.
In the remaining patches, #3 to #7, add a selftest. This takes place across
several patches. Many of the helpers we would like to use for the test are
in forwarding/lib.sh, whereas net/ is a more suitable place for the test,
so the libraries need to be massaged a bit first.
====================
Link: https://patch.msgid.link/cover.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that only one notification is produced for various FDB edit
operations.
Regarding the ip_link_add() and ip_link_master() helpers. This pattern of
action plus corresponding defer is bound to come up often, and a dedicated
vocabulary to capture it will be handy. tunnel_create() and vlan_create()
from forwarding/lib.sh are somewhat opaque and perhaps too kitchen-sinky,
so I tried to go in the opposite direction with these ones, and wrapped
only the bare minimum to schedule a corresponding cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/910c5880ae6d3b558d6889cbdba2be690c2615c6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A number of selftests run processes in the background and need to kill them
afterwards. Instead for everyone to open-code the kill / wait / redirect
mantra, add a helper in net/lib.sh. Convert existing open-code sites.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/a9db102067d741c118f0bd93b10c75e2a34665ea.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For logging to be useful, something has to set RET and retmsg by calling
ret_set_ksft_status(). There is a suite of functions to that end in
forwarding/lib: check_err, check_fail et.al. Move them to net/lib.sh so
that every net test can use them.
Existing lib.sh users might be using these same names for their functions.
However lib.sh is always sourced near the top of the file (checked), and
whatever new definitions will simply override the ones provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/f488a00dc85b8e0c1f3c71476b32b21b5189a847.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It would be good to use the same mechanism for scheduling and dispatching
general net tests as the many forwarding tests already use. To that end,
move the logging helpers to net/lib.sh so that every net test can use them.
Existing lib.sh users might be using the name themselves. However lib.sh is
always sourced near the top of the file (checked), and whatever new
definition will simply override the one provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/a6fc083486493425b2c61185c327845b6ce3233a.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to ndo_fdb_add, which was covered in the previous
patch, add the bool *notified argument to ndo_fdb_del. Callees that send a
notification on their own set the flag to true.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own:
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a paremeter to ndo_fdb_add,
bool *notified. The flag is primed to false, and if the callee sends a
notification on its own, it sets it to true, thus informing the core that
it should not generate another notification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Justin Lai says:
====================
Modifying format and renaming goto labels
This patch set primarily involves modifying the enum rtase_registers
format and renaming the goto labels in rtase_init_one.
====================
Link: https://patch.msgid.link/20241114112549.376101-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
