summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-20drm/i915: Extract skl_compute_wm_params()Ville Syrjälä
Extract the meat of skl_compute_plane_wm_params() into a lower level helper that doesn't depend on the plane state. We'll reuse this for the cursor ddb allocation calculations. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-4-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20drm/i915: Don't pass plane state to skl_compute_plane_wm()Ville Syrjälä
skl_compute_plane_wm() doesn't actually need the plane state. While it would make logically sense to pass it, we shall need to reuse skl_compute_plane_wm() to compute the minimum ddb allocation for the cursor before the cursor may be enabled. Thus we can't rely on the plane state. The alternative would be to duplicate a lot of the wm calculations for the cursor ddb allocation case, which doens't appeal to me. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-3-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20drm/i915: Accept alloc_size == blocksVille Syrjälä
If the minimum required ddb space for all the planes equals the total ddb space available we are allowed to use the relevant watermark level. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-2-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20drm/i915: Use HPLLVCO_MOBILE for all PNVsVille Syrjälä
To allow unsetting .is_mobile for the desktop variant of PNV fix up the cdclk code to select the mobile HPLLVCO register for both PNV variants. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-5-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20drm/i915: Introduce i915_has_asle()Ville Syrjälä
We want to allow the desktop PNV to not have .is_mobile set. To that end let's add a small helper to determine if the platform has the ASLE interrupt (or equivalent). Supposdely both PNV variants have it. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-4-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20drm/i915: Introduce i9xx_has_pps()Ville Syrjälä
Add a small helper to determine if we have the panel power sequencer or not. We'll make PNV an exceptional case so that we can unset .is_mobile for the desktop variant. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-3-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20drm/i915: Introduce i9xx_has_pfit()Ville Syrjälä
Make the code self-documenting by introducing i9xx_has_pfit(). Also make PNV an exceptional case so that we can unset .is_mobile for the desktop variant. v2: s/gen4/gen>=4/ (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190319142329.22881-1-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20drm/i915: Reorder gen3/4 swizzle detection logicVille Syrjälä
g33/i964g/g45 are the exceptional cases when it comes to the swizzle detection. Let's reorder the code to handle them first and let everything else be handled by the else branch. This allows us to unset .is_mobile for the desktop PNV variant (which supposedly must follow the "mobile" path here). Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20HID: logitech: Handle 0 scroll events for the m560Peter Hutterer
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it gets interpreted as a negative scroll direction event. This can cause scroll direction resets and thus broken scrolling. Fixes: 4435ff2f09a2fc ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org # v5.0 Reported-and-tested-by: Aimo Metsälä <aimetsal@outlook.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-03-20Revert "kbuild: use -Oz instead of -Os when using clang"Matthias Kaehlcke
The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c299de1ffbe56733647b01dbcc398c419. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-21powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurationsBen Hutchings
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is enabled, and that was the case before commit 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB"). On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now define it as 46. That is larger than the real number of physical address bits, and breaks calculations in zsmalloc: mm/zsmalloc.c:130:49: warning: right shift count is negative MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ^~ ... mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope struct size_class *size_class[ZS_SIZE_CLASSES]; ^~~~~~~~~~ Fixes: 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-20USB: serial: mos7720: fix mos_parport refcount imbalance on error pathLin Yi
The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by: Lin Yi <teroincn@163.com> Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-20rtc: sd3078: fix manufacturer nameAlexandre Belloni
The proper manufacturer name is Shenzhen whwave. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20ARM: dts: pfla02: increase phy reset durationMarco Felsch
Increase the reset duration to ensure correct phy functionality. The reset duration is taken from barebox commit 52fdd510de ("ARM: dts: pfla02: use long enough reset for ethernet phy"): Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Cc: Stefan Christ <s.christ@phytec.de> Cc: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: 3180f956668e ("ARM: dts: Phytec imx6q pfla02 and pbab01 support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20drm/i915/selftests: add test to verify get/put fw domainsDaniele Ceraolo Spurio
Exercise acquiring and releasing forcewake around register reads. In order to read a register behind a GT powerwell, we need to instruct that powerwell to wake up using a forcewake. When we no longer require the GT powerwell, we tell the GT to release our forcewake. Inside the forcewake, the register read should work but outside it should just return garbage, 0 being the most common garbage. Thus we can detect when we are inside and outside of the forcewake with just a simple register read, and so can verify that the GT powerwell is released when we say so. v2: Picking the right forcewaked register to return 0 outside of forcewake is an art. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190320080052.27273-1-chris@chris-wilson.co.uk
2019-03-20tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfersNoralf Trønnes
Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org
2019-03-20rtc: sh: Fix invalid alarm warning for non-enabled alarmGeert Uytterhoeven
When no alarm has been programmed on RSK-RZA1, an error message is printed during boot: rtc rtc0: invalid alarm value: 2019-03-14T255:255:255 sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed. While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields. Fix this by returning -1 instead, as this value is handled fine for all fields. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configuredStephen Boyd
If we encounter a failure during suspend where this RTC was programmed to wakeup the system from suspend, but that wakeup couldn't be configured because the system didn't support wakeup interrupts, we'll run into the following warning: Unbalanced IRQ 166 wake disable WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278 This happens because the suspend process isn't aborted when the RTC fails to configure the wakeup IRQ. Instead, we continue suspending the system and then another suspend callback fails the suspend process and "unwinds" the previously suspended drivers by calling their resume callbacks. When we get back to resuming this RTC driver, we'll call disable_irq_wake() on an IRQ that hasn't been configured for wake. Let's just fail suspend/resume here if we can't configure the system to wake and the user has chosen to wakeup with this device. This fixes this warning and makes the code more robust in case there are systems out there that can't wakeup from suspend on this line but the user has chosen to do so. Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Evan Green <evgreen@chromium.org> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-By: Benson Leung <bleung@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20reset: Add acquire/release support for arraysThierry Reding
Add implementations that apply acquire and release operations to all reset controls part of a reset control array. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: Add acquired flag to of_reset_control_array_get()Thierry Reding
In order to be able to request an array of reset controls in acquired or released mode, add the acquired flag to of_reset_control_array_get() and pass the flag to subsequent calls of __of_reset_control_get(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: add acquired/released state for exclusive reset controlsPhilipp Zabel
There are cases where a driver needs explicit control over a reset line that is exclusively conneted to its device, but this control has to be temporarily handed over to the power domain controller to handle reset requirements during power transitions. Allow multiple exclusive reset controls to be requested in 'released' state for the same physical reset line, only one of which can be acquired at the same time. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-20drm/vboxvideo: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320015429.86347-1-yuehaibing@huawei.com
2019-03-20drm/i915/selftests: Provide stub reset functionsChris Wilson
If a test fails, we quite often mark the device as wedged. Provide the stub functions so that we can wedge the mock device, and avoid exploding on test failures. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109981 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190319214233.25498-3-chris@chris-wilson.co.uk
2019-03-20USB: gadget: f_hid: fix deadlock in f_hidg_write()Radoslav Gerganov
In f_hidg_write() the write_spinlock is acquired before calling usb_ep_queue() which causes a deadlock when dummy_hcd is being used. This is because dummy_queue() callbacks into f_hidg_req_complete() which tries to acquire the same spinlock. This is (part of) the backtrace when the deadlock occurs: 0xffffffffc06b1410 in f_hidg_req_complete 0xffffffffc06a590a in usb_gadget_giveback_request 0xffffffffc06cfff2 in dummy_queue 0xffffffffc06a4b96 in usb_ep_queue 0xffffffffc06b1eb6 in f_hidg_write 0xffffffff8127730b in __vfs_write 0xffffffff812774d1 in vfs_write 0xffffffff81277725 in SYSC_write Fix this by releasing the write_spinlock before calling usb_ep_queue() Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # 4.11+ Fixes: 749494b6bdbb ("usb: gadget: f_hid: fix: Move IN request allocation to set_alt()") Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20drm/meson: exclusively use the canvas provider moduleMaxime Jourdan
Now that the DMC register range is no longer in the bindings, remove any mention towards it and exclusively use the meson-canvas module. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190311105144.7276-3-mjourdan@baylibre.com
2019-03-20dt-bindings: display: amlogic, meson-vpu: exclusively use amlogic, canvasMaxime Jourdan
When the DRM driver for the meson platform was created, the bindings required that the DMC register region was provided. Through those DMC registers, the display driver could configure an IP called "canvas", a video lookup table used by the display IP. It was later discovered that "canvas" is actually an IP shared by other components than display: video decoder, 2D engine.. and that it wasn't possible to keep the canvas code in DRM. Over the past few months, incremental efforts have been deployed to create a standalone meson-canvas driver [1], and the DRM driver was patched to optionally use it if present [2]. This is the final step of those efforts where we simply remove any control over DMC that the meson DRM driver has. Please note that this breaks compatibility with older DTs that only provide the DMC register range but not the amlogic,canvas node. [1] https://patchwork.kernel.org/cover/10573771/ [2] https://patchwork.freedesktop.org/series/52076/ Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190311105144.7276-2-mjourdan@baylibre.com
2019-03-20drm/i915: Update DRIVER_DATE to 20190320Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-03-20netfilter: nf_tables: add missing ->release_ops() in error path of newrule()Taehee Yoo
->release_ops() callback releases resources and this is used in error path. If nf_tables_newrule() fails after ->select_ops(), it should release resources. but it can not call ->destroy() because that should be called after ->init(). At this point, ->release_ops() should be used for releasing resources. Test commands: modprobe -rv xt_tcpudp iptables-nft -I INPUT -m tcp <-- error command lsmod Result: Module Size Used by xt_tcpudp 20480 2 <-- it should be 0 Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-20drm/vmwgfx: Don't double-free the mode stored in par->set_modeThomas Zimmermann
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-03-20drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID'sDeepak Rawat
If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: <stable@vger.kernel.org> Fixes: 4eb085e42fde ("drm/vmwgfx: Convert to new IDA API") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-03-20usb: gadget: net2272: Fix net2272_dequeue()Guido Kiener
Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: gadget: net2280: Fix net2280_dequeue()Guido Kiener
When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: gadget: net2280: Fix overrun of OUT messagesGuido Kiener
The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: dwc3: pci: add support for Comet Lake PCH IDFelipe Balbi
This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-19drm/i915/cml: Introduce Comet Lake PCHAnusha Srivatsa
Comet Lake PCH is based off of Cannon Point(CNP). Add PCI ID for Comet Lake PCH. v2: Code cleanup (DK) v3: Comment cleanup (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318200133.9666-2-anusha.srivatsa@intel.com
2019-03-19drm/i915/cml: Add CML PCI IDSAnusha Srivatsa
Comet Lake is a Intel Processor containing Gen9 Intel HD Graphics. This patch adds the initial set of PCI IDs. Comet Lake comes off of Coffee Lake - adding the IDs to Coffee Lake ID list. More support and features will be in the patches that follow. v2: Split IDs according to GT. (Rodrigo) v3: Update IDs. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318200133.9666-1-anusha.srivatsa@intel.com
2019-03-19mpls: Fix 6PE forwardingVinay K Nallamothu
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6 nexthop to connect IPv6 islands over IPv4 only MPLS network core. Prior to this fix, to find the link-layer destination mac address, 6PE enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6 nexthop address over the interface facing the IPv4 only core which wouldn't success as the core is IPv6 free. This fix changes that behavior on 6PE host to treat the nexthop as IPv4 address and send ARP requests whenever the next-hop address is an IPv4-mapped IPv6 address. Below topology illustrates the issue and how the patch addresses it. abcd::1.1.1.1 (lo) abcd::2.2.2.2 (lo) R0 (PE/host)------------------------R1--------------------------------R2 (PE/host) <--- IPv4 MPLS core ---> <------ IPv4 MPLS core --------> eth1 eth2 eth3 eth4 172.18.0.10 172.18.0.11 172.19.0.11 172.19.0.12 ffff::172.18.0.10 ffff::172.19.0.12 <------------------IPv6 MPLS tunnel ----------------------> R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels between R0,R1 and R1,R2. docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1 docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4 docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3 docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2 With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2, using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for 172.18.18.0.11. Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net> Tested-by: Avinash Lingala <ar977m@att.com> Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-193c515: fix integer overflow warningArnd Bergmann
clang points out a harmless signed integer overflow: drivers/net/ethernet/3com/3c515.c:1530:66: error: implicit conversion from 'int' to 'short' changes value from 32783 to -32753 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~ drivers/net/ethernet/3com/3c515.c:1532:52: error: implicit conversion from 'int' to 'short' changes value from 32775 to -32761 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ drivers/net/ethernet/3com/3c515.c:1534:38: error: implicit conversion from 'int' to 'short' changes value from 32773 to -32763 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxBroadcast; ~ ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ Make the variable unsigned to avoid the overflow. Fixes: Linux-2.1.128pre1 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19PM / Domains: Avoid a potential deadlockJiada Wang
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19ACPI / utils: Drop reference in test for device presenceAndy Shevchenko
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19Merge tag 'meson-clk-fixes-for-5.1' of https://github.com/BayLibre/clk-meson ↵Stephen Boyd
into clk-fixes Pull a round of fixes for meson clocks from Neil Armstrong: - g12a: Fix VPU clock parents and mux mask - gxbb: Add CLK_DIVIDER_ROUND_CLOSEST to video decoder clocks * tag 'meson-clk-fixes-for-5.1' of https://github.com/BayLibre/clk-meson: clk: meson-g12a: fix VPU clock parents clk: meson: g12a: fix VPU clock muxes mask clk: meson-gxbb: round the vdec dividers to closest
2019-03-19dccp: do not use ipv6 header for ipv4 flowEric Dumazet
When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tcp: do not use ipv6 header for ipv4 flowEric Dumazet
When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35f22d ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ffc665 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19nfc: Fix to check for kmemdup failureAditya Pakki
In case of kmemdup failure while setting the service name the patch returns -ENOMEM upstream for processing. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net-sysfs: call dev_hold if kobject_init_and_add successYueHaibing
In netdev_queue_add_kobject and rx_queue_add_kobject, if sysfs_create_group failed, kobject_put will call netdev_queue_release to decrease dev refcont, however dev_hold has not be called. So we will see this while unregistering dev: unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1 Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d0d668371679 ("net: don't decrement kobj reference count on init failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19drm/amdgpu: support userptr cross VMAs case with HMMPhilip Yang
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdkfd: support concurrent userptr update for HMMPhilip Yang
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdgpu: stop evicting busy PDs/PTsChristian König
Otherwise we won't be able to cleanly handle page faults. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdgpu: wait for VM to become idle during flushChristian König
Make sure that not only the entities are flush, but that we also wait for the HW to finish all processing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdgpu: remove non-sense NULL ptr checkChristian König
It's a bug having a dead pointer in the IDR, silently returning is the worst we can do. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-10-02 15:09:03 +0000