summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-28Do not return number of bytes written for ioctl CIFS_IOC_COPYCHUNK_FILESachin Prabhu
commit 620d8745b35d ("Introduce cifs_copy_file_range()") changes the behaviour of the cifs ioctl call CIFS_IOC_COPYCHUNK_FILE. In case of successful writes, it now returns the number of bytes written. This return value is treated as an error by the xfstest cifs/001. Depending on the errno set at that time, this may or may not result in the test failing. The patch fixes this by setting the return value to 0 in case of successful writes. Fixes: commit 620d8745b35d ("Introduce cifs_copy_file_range()") Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-28Fix match_prepath()Sachin Prabhu
Incorrect return value for shares not using the prefix path means that we will never match superblocks for these shares. Fixes: commit c1d8b24d1819 ("Compare prepaths when comparing superblocks") Cc: stable@vger.kernel.org Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-28mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046ayangbo lu
The ls1046a datasheet specified that the max SD clock frequency for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet specified it's 125MHz for ls1012a. So this patch is to add the limitation. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelayyangbo lu
The loop to poll ESDHC_CLOCK_STABLE bit with mdelay would waste time because the time to stabilize is much less than 1 ms. This patch is to use udelay instead to avoid time wasting. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHYHu Ziji
The default value of LOGIC_TIMING_ADJUST register in eMMC 5.0 PHY is different from that in eMMC 5.1 PHY. Set the specific value for that register in eMMC 5.0 PHY. Signed-off-by: Hu Ziji <huziji@marvell.com> Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28mmc: sdhci-xenon: Fix the work flow in xenon_remove().Hu Ziji
sdhci_remove_host() might execute SOFT_RESET_ALL. Inside xenon_remove(), Xenon SDHC should be enabled during sdhci_remove_host(). Move xenon_sdhc_unprepare after sdhci_remove_host() such that Xenon SDHC is disabled after sdhci_remove_host() completes. Signed-off-by: Hu Ziji <huziji@marvell.com> Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28mac80211: Add support for BSS max idle period elementAvraham Stern
Parse the BSS max idle period element and set the BSS configuration accordingly so the driver can use this information to configure the max idle period and to use protected management frames for keep alive when required. The BSS max idle period element is defined in IEEE802.11-2016, section 9.4.2.79 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Fix possible sband related NULL pointer de-referenceMohammed Shafi Shajakhan
Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabledPaolo Abeni
When creating a new ipvs service, ipv6 addresses are always accepted if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family is not explicitly checked. This allows the user-space to configure ipvs services even if the system is booted with ipv6.disable=1. On specific configuration, ipvs can try to call ipv6 routing code at setup time, causing the kernel to oops due to fib6_rules_ops being NULL. This change addresses the issue adding a check for the ipv6 module being enabled while validating ipv6 service operations and adding the same validation for dest operations. According to git history, this issue is apparently present since the introduction of ipv6 support, and the oops can be triggered since commit 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Fixes: 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2017-04-28ipvs: change comparison on sync_refresh_periodAaron Conole
The sync_refresh_period variable is unsigned, so it can never be < 0. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Simon Horman <horms@verge.net.au>
2017-04-28ipvs: remove unused function ip_vs_set_state_timeoutAaron Conole
There are no in-tree callers of this function and it isn't exported. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Simon Horman <horms@verge.net.au>
2017-04-28staging: typec: Fairchild FUSB302 Type-c chip driverYueyao Zhu
Fairchild FUSB302 Type-C chip driver that works with Type-C Port Controller Manager to provide USB PD and USB Type-C functionalities. Signed-off-by: Yueyao Zhu <yueyao.zhu@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-28staging: typec: Type-C Port Controller Interface driver (tcpci)Guenter Roeck
The port controller interface driver interconnects the Type-C Port Manager with a Type-C Port Controller Interface (TCPCI) compliant port controller. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-28staging: typec: USB Type-C Port Manager (tcpm)Guenter Roeck
This driver implements the USB Type-C Power Delivery state machine for both source and sink ports. Alternate mode support is not fully implemented. The driver attaches to the USB Type-C class code implemented in the following patches. usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY usb: USB Type-C connector class This driver only implements the state machine. Lower level drivers are responsible for - Reporting VBUS status and activating VBUS - Setting CC lines and providing CC line status - Setting line polarity - Activating and deactivating VCONN - Setting the current limit - Activating and deactivating PD message transfers - Sending and receiving PD messages The driver provides both a functional API as well as callbacks for lower level drivers. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-28mac80211: add ieee80211_tx_status_extFelix Fietkau
This allows the driver to pass in struct ieee80211_tx_status directly. Make ieee80211_tx_status_noskb a wrapper around it. As with ieee80211_tx_status_noskb, there is no _ni variant of this call, because it probably won't be needed. Even if the driver won't provide any extra status info other than what's in struct ieee80211_tx_info already, it can optimize status reporting this way by passing in the station pointer. Signed-off-by: Felix Fietkau <nbd@nbd.name> [use C99 initializers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: move ieee80211_tx_status_noskb below ieee80211_tx_statusFelix Fietkau
Makes further cleanups more readable Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: make rate control tx status API more extensibleFelix Fietkau
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack struct ieee80211_tx_status instead of struct ieee80211_tx_info. This struct can be used to pass extra information, e.g. for dynamic tx power control Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: use bitfield macros for encoded rateJohannes Berg
Instead of hand-coding the bit manipulations, use the bitfield macros to generate the code for the encoded bitrate. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28gpio: f7188x: Add a missing breakDan Carpenter
A break statement was obviously intended here. Fixes: d69843e416d3 ("gpio: f7188x: Add F71889A GPIO support.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28pinctrl: mediatek: Add missing pinctrl bindings for mt7623Sean Wang
Add missing pinctrl binding these which would be used in devicetree related files. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28gpio: omap: return error if requested debounce time is not possibleDavid Rivshin
omap_gpio_debounce() does not validate that the requested debounce is within a range it can handle. Instead it lets the register value wrap silently, and always returns success. This can lead to all sorts of unexpected behavior, such as gpio_keys asking for a too-long debounce, but getting a very short debounce in practice. Fix this by returning -EINVAL if the requested value does not fit into the register field. If there is no debounce clock available at all, return -ENOTSUPP. Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce") Cc: <stable@vger.kernel.org> # 4.3+ Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28gpio: Add ROHM BD9571MWV-M PMIC GPIO driverMarek Vasut
Add driver for the GPIO block in the ROHM BD9571MWV-W MFD PMIC. This block is pretty trivial and supports setting GPIO direction as Input/Output and in case of Output, supports setting value. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()Wei Yongjun
In case of error, the function pinctrl_register() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28gpio: gpio-wcove: fix GPIO IRQ status maskKuppuswamy Sathyanarayanan
According to Whiskey Cove PMIC spec, bit 7 of GPIOIRQ0_REG belongs to battery IO. So we should skip this bit when checking for GPIO IRQ pending status. Otherwise, wcove_gpio_irq_handler() might go into the infinite loop until IRQ "pending" status becomes 0. This patch fixes this issue. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-28x86/KASLR: Fix kexec kernel boot crash when KASLR randomization failsBaoquan He
Dave found that a kdump kernel with KASLR enabled will reset to the BIOS immediately if physical randomization failed to find a new position for the kernel. A kernel with the 'nokaslr' option works in this case. The reason is that KASLR will install a new page table for the identity mapping, while it missed building it for the original kernel location if KASLR physical randomization fails. This only happens in the kexec/kdump kernel, because the identity mapping has been built for kexec/kdump in the 1st kernel for the whole memory by calling init_pgtable(). Here if physical randomizaiton fails, it won't build the identity mapping for the original area of the kernel but change to a new page table '_pgtable'. Then the kernel will triple fault immediately caused by no identity mappings. The normal kernel won't see this bug, because it comes here via startup_32() and CR3 will be set to _pgtable already. In startup_32() the identity mapping is built for the 0~4G area. In KASLR we just append to the existing area instead of entirely overwriting it for on-demand identity mapping building. So the identity mapping for the original area of kernel is still there. To fix it we just switch to the new identity mapping page table when physical KASLR succeeds. Otherwise we keep the old page table unchanged just like "nokaslr" does. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1493278940-5885-1-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-27pstore: Solve lockdep warning by moving inode locksKees Cook
Lockdep complains about a possible deadlock between mount and unlink (which is technically impossible), but fixing this improves possible future multiple-backend support, and keeps locking in the right order. The lockdep warning could be triggered by unlinking a file in the pstore filesystem: -> #1 (&sb->s_type->i_mutex_key#14){++++++}: lock_acquire+0xc9/0x220 down_write+0x3f/0x70 pstore_mkfile+0x1f4/0x460 pstore_get_records+0x17a/0x320 pstore_fill_super+0xa4/0xc0 mount_single+0x89/0xb0 pstore_mount+0x13/0x20 mount_fs+0xf/0x90 vfs_kern_mount+0x66/0x170 do_mount+0x190/0xd50 SyS_mount+0x90/0xd0 entry_SYSCALL_64_fastpath+0x1c/0xb1 -> #0 (&psinfo->read_mutex){+.+.+.}: __lock_acquire+0x1ac0/0x1bb0 lock_acquire+0xc9/0x220 __mutex_lock+0x6e/0x990 mutex_lock_nested+0x16/0x20 pstore_unlink+0x3f/0xa0 vfs_unlink+0xb5/0x190 do_unlinkat+0x24c/0x2a0 SyS_unlinkat+0x16/0x30 entry_SYSCALL_64_fastpath+0x1c/0xb1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#14); lock(&psinfo->read_mutex); lock(&sb->s_type->i_mutex_key#14); lock(&psinfo->read_mutex); Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Namhyung Kim <namhyung@kernel.org>
2017-04-27docs: Fix a couple typosStan Drozd
This commit gets rid of some minor errors in Documentation/: * cputopology.txt: drawes -> drawers * debugging-via-ohci1394.txt: remove an unnecessary line break * static-keys: statemnts -> statements * zorro.txt: busses -> buses Signed-off-by: Stan Drozd <drozdziak1@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-27docs: Fix a spelling error in vfio-mediated-device.txtStan Drozd
This commit fixes a repeated "the" in vfio-mediated-device.txt and reflows the paragraph. Signed-off-by: Stan Drozd <drozdziak1@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-27docs: Fix a spelling error in ioctl-number.txtStan Drozd
This commit fixes a misspelled header name in the ioctl numbers list Signed-off-by: Stan Drozd <drozdziak1@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-27MAINTAINERS: update file entry for HSI subsystemTobias Klauser
The HSI documentation was moved into Documentation/driver-api/hsi.rst in commit 5e995786850e ("docs: split up serial-interfaces.rst"). Update the corresponding file entry in MAINTAINERS. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-27pstore: Fix flags to enable dumps on powerpcAnkit Kumar
After commit c950fd6f201a kernel registers pstore write based on flag set. Pstore write for powerpc is broken as flags(PSTORE_FLAGS_DMESG) is not set for powerpc architecture. On panic, kernel doesn't write message to /fs/pstore/dmesg*(Entry doesn't gets created at all). This patch enables pstore write for powerpc architecture by setting PSTORE_FLAGS_DMESG flag. Fixes: c950fd6f201a ("pstore: Split pstore fragile flags") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Ankit Kumar <ankit@linux.vnet.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-04-27pstore: Remove unused vmalloc.h in pmsgGeliang Tang
Since the vmalloc code has been removed from write_pmsg() in the commit "5bf6d1b pstore/pmsg: drop bounce buffer", remove the unused header vmalloc.h. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-04-27Merge tag 'wireless-drivers-next-for-davem-2017-04-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Few remaining patches for 4.12 submitted during the last week. Major changes: iwlwifi * the firmware for 7265D and 3168 NICs is frozen at version 29 * more support for the upcoming A000 series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27dm mpath: make it easier to detect unintended I/O request flushesBart Van Assche
I/O errors triggered by multipathd incorrectly not enabling the no-flush flag for DM_DEVICE_SUSPEND or DM_DEVICE_RESUME are hard to debug. Add more logging to make it easier to debug this. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit()Bart Van Assche
No functional change but makes the code easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATHBart Van Assche
Instead of checking MPATHF_QUEUE_IF_NO_PATH, MPATHF_SAVED_QUEUE_IF_NO_PATH and the no_flush flag to decide whether or not to push back a request (or bio) if there are no paths available, only clear MPATHF_QUEUE_IF_NO_PATH in queue_if_no_path() if no_flush has not been set. The result is that only a single bit has to be tested in the hot path to decide whether or not a request must be pushed back and also that m->lock does not have to be taken in the hot path. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm: introduce enum dm_queue_mode to cleanup related codeBart Van Assche
Introduce an enumeration type for the queue mode. This patch does not change any functionality but makes the DM code easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm mpath: verify __pg_init_all_paths locking assumptions at runtimeBart Van Assche
Verify at runtime that __pg_init_all_paths() is called with multipath.lock held if lockdep is enabled. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm: verify suspend_locking assumptions at runtimeBart Van Assche
Ensure that the assumptions about the caller holding suspend_lock are checked at runtime if lockdep is enabled. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm block manager: remove an unused argument from dm_block_manager_create()Bart Van Assche
The 'cache_size' argument of dm_block_manager_create() has never been used. Remove it along with the definitions of the constants passed as the 'cache_size' argument. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue()Bart Van Assche
Otherwise the request-based DM blk-mq request_queue will be put into service without being properly exported via sysfs. Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm mpath: delay requeuing while path initialization is in progressBart Van Assche
Requeuing a request immediately while path initialization is ongoing causes high CPU usage, something that is undesired. Hence delay requeuing while path initialization is in progress. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27dm mpath: avoid that path removal can trigger an infinite loopBart Van Assche
If blk_get_request() fails, check whether the failure is due to a path being removed. If that is the case, fail the path by triggering a call to fail_path(). This avoids that the following scenario can be encountered while removing paths: * CPU usage of a kworker thread jumps to 100%. * Removing the DM device becomes impossible. Delay requeueing if blk_get_request() returns -EBUSY or -EWOULDBLOCK, and the queue is not dying, because in these cases immediate requeuing is inappropriate. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27md/raid1: Use a new variable to count flighting sync requestsXiao Ni
In new barrier codes, raise_barrier waits if conf->nr_pending[idx] is not zero. After all the conditions are true, the resync request can go on be handled. But it adds conf->nr_pending[idx] again. The next resync request hit the same bucket idx need to wait the resync request which is submitted before. The performance of resync/recovery is degraded. So we should use a new variable to count sync requests which are in flight. I did a simple test: 1. Without the patch, create a raid1 with two disks. The resync speed: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0.00 0.00 166.00 0.00 10.38 0.00 128.00 0.03 0.20 0.20 0.00 0.19 3.20 sdc 0.00 0.00 0.00 166.00 0.00 10.38 128.00 0.96 5.77 0.00 5.77 5.75 95.50 2. With the patch, the result is: sdb 2214.00 0.00 766.00 0.00 185.69 0.00 496.46 2.80 3.66 3.66 0.00 1.03 79.10 sdc 0.00 2205.00 0.00 769.00 0.00 186.44 496.52 5.25 6.84 0.00 6.84 1.30 100.10 Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-27dm mpath: split and rename activate_path() to prepare for its expanded useBart Van Assche
activate_path() is renamed to activate_path_work() which now calls activate_or_offline_path(). activate_or_offline_path() will be used by the next commit. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 14:01:20 +0000