summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-15ACPI / EC: Add event clearing variation support.Lv Zheng
We've been suffering from the uncertainty of the SCI_EVT clearing timing. This patch implements 3 of 4 possible modes to handle SCI_EVT clearing variations. The old behavior is kept in this patch. Status: QR_EC is re-checked as early as possible after checking previous SCI_EVT. This always leads to 2 QR_EC transactions per SCI_EVT indication and the target may implement event queue which returns 0x00 indicating "no outstanding event". This is proven to be a conflict against Windows behavior, but is still kept in this patch to make the EC driver robust to the possible regressions that may occur on Samsung platforms. Query: QR_EC is re-checked after the target has handled the QR_EC query request command pushed by the host. Event: QR_EC is re-checked after the target has noticed the query event response data pulled by the host. This timing is not determined by any IRQs, so we may need to use a guard period in this mode, which may explain the existence of the ec_guard() code used by the old EC driver where the re-check timing is implemented in the similar way as this mode. Method: QR_EC is re-checked as late as possible after completing the _Qxx evaluation. The target may implement SCI_EVT like a level triggered interrupt. It is proven on kernel bugzilla 94411 that, Windows will have all _Qxx evaluations parallelized. Thus unless required by further evidences, we needn't implement this mode as it is a conflict of the _Qxx parallelism requirement. Note that, according to the reports, there are platforms that cannot be handled using the "Status" mode without enabling the EC_FLAGS_QUERY_HANDSHAKE quirk. But they can be handled with the other modes according to the tests (kernel bugzilla 97381). The following log entry can be used to confirm the differences of the 3 modes as it should appear at the different positions for the 3 modes: Command(QR_EC) unblocked Status: appearing after EC_SC(W) = 0x84 Query: appearing after EC_DATA(R) = 0xXX where XX is the event number used to determine _QXX Event: appearing after first EC_SC(R) = 0xX0 SCI_EVT=x BURST=0 CMD=0 IBF=0 OBF=0 that is next to the following log entry: Command(QR_EC) completed by hardware Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411 Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381 Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111 Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com> Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / EC: Convert event handling work queue into loop style.Lv Zheng
During the period that a work queue is scheduled (queued up for run) but hasn't been run, second schedule_work() could fail. This may not lead to the loss of queries because QR_EC is always ensured to be submitted after the work queue has been in the running state. The event handling work queue can be changed into the loop style to allow us to control the code in a more flexible way: 1. Makes it possible to add event=0x00 termination condition in the loop. 2. Increases the thoughput of the QR_EC transactions as the 2nd+ QR_EC transactions may be handled in the same work item used for the 1st QR_EC transaction, thus the delay caused by the 2nd+ work item scheduling can be eliminated. Except the logging message changes and the throughput improvement, this patch is just a funcitonal no-op. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Tested-by: Tigran Gabrielyan <tigrangab@gmail.com> Tested-by: Adrien D <ghbdtn@openmailbox.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / EC: Cleanup transaction state transition.Lv Zheng
This patch collects transaction state transition code into one function. We then could have a single function to maintain transaction transition related behaviors. No functional changes. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Tested-by: Tigran Gabrielyan <tigrangab@gmail.com> Tested-by: Adrien D <ghbdtn@openmailbox.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / scan: constify ACPI device idsMathias Krause
Make the button ACPI device ID array static const. Safes us a little bit of code. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / processor: constify DMI system id tableMathias Krause
There is no need to have processor_power_dmi_table[] writeable, constify it. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / HED: constify ACPI device idsMathias Krause
Constify the acpi_hed_ids[] ACPI device IDs array -- no need to have it writeable. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / LPSS: constify device descriptorsMathias Krause
The device descriptors are never written to -- even pointed to as 'const' from struct lpss_private_data. Make them r/o for real. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / battery: mark DMI table as __initconstMathias Krause
The bat_dmi_table[] DMI table is referenced from the __init function acpi_battery_init_async() only. It and its referenced functions can therefore be marked __initconst to free up ~1kB of runtime memory after initialization is done. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / battery: minor tweaks to acpi_battery_units()Mathias Krause
Make the acpi_battery_units() function take a const argument and return a const char*, too. Also make it static. It probably doesn't matter, as gcc will be clever enough to optimize and inline the code even without these hints. However, we also get rid of a #ifdef block by moving the function closer to its usage location, so it's at least a small gain in code readability. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / battery: constify the offset tablesMathias Krause
The offset tables are only read, not modified. Make them const. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15mfd: cros_ec: spi: Add delay for asserting CSAlexandru M Stan
Some ECs need a little time for waking up before they can accept SPI data at a high speed. This is configurable via a DT property "google,cros-ec-spi-pre-delay". This patch makes the cros_ec_spi driver to cause a delay before the beginning of a SPI transaction, to make sure that the EC has already woken up, if the property has been defined in the DTS. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: spi: Add a DT property to delay asserting the CSAlexandru M Stan
Some ECs need a little time for waking up before they can accept SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay" property to the DT binding to configure this. If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the beginning of a transaction. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Support multiple EC in a systemGwendal Grignou
Chromebooks can have more than one Embedded Controller so the cros_ec device id has to be incremented for each EC registered. Add a new structure to represent multiple EC as different char devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to cros_ec_device and allows sysfs inferface for cros_pd. Also reduce number of allocated objects, make chromeos sysfs class object a static and add refcounting to prevent object deletion while command is in progress. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: add bus-specific proto v3 codeStephen Barber
Add proto v3 support to the SPI, I2C, and LPC. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: add proto v3 skeletonStephen Barber
Add support in cros_ec.c to handle EC host command protocol v3. For v3+, probe for maximum shared protocol version and max request, response, and passthrough sizes. For now, this will always fall back to v2, since there is no bus-specific code for handling proto v3 packets. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Move protocol helpers out of the MFD driverJavier Martinez Canillas
The MFD driver should only have the logic to instantiate its child devices and setup any shared resources that will be used by the subdevices drivers. The cros_ec MFD is more complex than expected since it also has helpers to communicate with the EC. So the driver will only get more bigger as other protocols are supported in the future. So move the communication protocol helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: rev cros_ec_commands.hStephen Barber
Update cros_ec_commands.h to the latest version in the EC firmware sources and add power domain and passthru commands. Also, update lightbar to use new command names. Signed-off-by: Stephen Barber <smbarber@chromium.org> Reviewed-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Use a zero-length array for command dataJavier Martinez Canillas
Commit 1b84f2a4cd4a ("mfd: cros_ec: Use fixed size arrays to transfer data with the EC") modified the struct cros_ec_command fields to not use pointers for the input and output buffers and use fixed length arrays instead. This change was made because the cros_ec ioctl API uses that struct cros_ec_command to allow user-space to send commands to the EC and to get data from the EC. So using pointers made the API not 64-bit safe. Unfortunately this approach was not flexible enough for all the use-cases since there may be a need to send larger commands on newer versions of the EC command protocol. So to avoid to choose a constant length that it may be too big for most commands and thus wasting memory and CPU cycles on copy from and to user-space or having a size that is too small for some big commands, use a zero-length array that is both 64-bit safe and flexible. The same buffer is used for both output and input data so the maximum of these values should be used to allocate it. Suggested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Instantiate sub-devices from device treeTodd Broch
If the EC device tree node has sub-nodes, try to instantiate them as MFD sub-devices. We can configure the EC features provided by the board. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Remove parent fieldGwendal Grignou
Parent and device were pointing to the same device structure. Parent is unused, removed. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Stephen Barber <smbarber@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15ACPI / AC: constify DMI system id tableMathias Krause
There is no need to have ac_dmi_table[] writeable, constify it. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / video: constify ACPI and DMI id tablesMathias Krause
Make the video ACPI device ID array static and constify the DMI system IDs array. Saves us a little bit of code. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / video: Add a parameter to not register the backlight sysfs interfaceHans de Goede
On some systems acpi-video backlight is broken in the sense that it cannot control the brightness of the backlight, but it must still be called on resume to power-up the backlight after resume. This commit allows these systems to work by going through all the usual backlight control moves, while not registering a sysfs backlight interface. This commit also adds a quirk enabling this parameter on Toshiba Portege R830 systems which are known to be affected by this. I wish there was a better way to deal with this, but we've been unable to find one. Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012 Link: https://bugs.freedesktop.org/show_bug.cgi?id=82634 Reported-and-tested-by: Sylvain Pasche <sylvain.pasche@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / video: Add enable_native_backlight quirk for MacbookPro12,1Hans de Goede
It seems that the latest generation of MacbookPro needs to use the native backlight driver, just like most modern laptops do, but it does not automatically get enabled as the Apple BIOS does not advertise Windows 8 compatibility. So add a quirk for this. Reported-by: Christopher Beland <beland@alum.mit.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ALSA: bebob: add support for Behringer FCA 610/1616Takashi Sakamoto
They're based on DM1500 (ArchWave produced), and BeBoB version 3 is installed. $ cat /proc/asound/FCA610/firewire/firmware Manufacturer: bridgeCo Protocol Ver: 3 Build Ver: 0 GUID: 0x001564000002AD73 Model ID: 0x03 Model Rev: 0 Firmware Date: 20121102 Firmware Time: 153431 Firmware ID: 0x610 Firmware Ver: 8348 Base Addr: 0x400C0080 Max Size: 1422624 Loader Date: 20121015 Loader Time: 104710 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: keep duplex streams always to keep internal multiplexer properlyTakashi Sakamoto
Behringer FCA610 transmits packets with periodic noisy PCM samples when receiving no streams, and generates a bit noisy sound. ALSA BeBoB driver is programmed to establish both in/out connections when starting streaming, then transfers packets as userspace applications requested. This means that there's a case that one of incoming/outgoing streams is running, to save CPU and bandwidth usage. Although, it's natural to start transferring packets in both direction. This commit makes this driver to keeps duplex streams always. Tested-by: Kim Tore Jensen <kim@incendio.no> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: loosen up severity of checking continuity for BeBoB v3 quirkTakashi Sakamoto
PrismSound Orpheus, Behringer UFX1604 and FCA610 work with BeBoB v3, and they're confirmed to transmit discontinuous packets in the beginning of streaming. payload CIP headers 8 0x00070000 0x9002FFFF 8 0x00070000 0x9002FFFF 8 0x00070000 0x9002FFFF 8 0x00070008 0x9002FFFF <- 8 0x00070008 0x9002FFFF 8 0x00070008 0x9002FFFF 8 0x00070008 0x9002FFFF 8 0x00070008 0x9002FFFF 8 0x00070008 0x9002FFFF 232 0x00070000 0x9002E798 <- 232 0x00070008 0x9002FB99 232 0x00070010 0x90021398 8 0x00070018 0x9002FFFF (This sample was got with Behringer FCA610 and FFADO library.) This commit sets CIP_EMPTY_HAS_WRONG_DBC and CIP_SKIP_DBC_ZERO_CHECK to ignore these discontinuities. Tested-by: Kim Tore Jensen <kim@incendio.no> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: expand timeout for DM1500 quirkTakashi Sakamoto
Behringer FCA610 and UFX1604 is confirmed to require more time till transmitting packets after establishing connections. This seems to be a quirk of DM1500 ASIC which ArchWave produced. For this quirk, this commit extends the time to wait up to 2 seconds. As a result, in worst cases, below userspace functions require 2 seconds to return. - snd_pcm_prepare() - snd_pcm_hw_params() - snd_pcm_recover() Tested-by: Kim Tore Jensen <kim@incendio.no> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: add 'version' member for BeBoB protocol versionTakashi Sakamoto
BeBoB installed devices have BeBoB register area. This area stores basic information about its firmware. A register has its protocol version. This commit adds 'version' member and store the device's protocol version to handle v3 quirks in following commits. Tested-by: Kim Tore Jensen <kim@incendio.no> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: add SYT-Match supportTakashi Sakamoto
In previous commits, this driver can detect the source of clock as mush as possible. SYT-Match mode is also available. This commit purge the restriction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: obsolete string literal expression for clock sourceTakashi Sakamoto
The old string literals were completely replaced by new normalized representation. This commit obsoletes it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: use normalized representation for the type of clock sourceTakashi Sakamoto
This commit changes function prototype and its processing. As a result, function caller can execute additional processing according to detected clock source. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: preparation for replacing string literals by normalized ↵Takashi Sakamoto
representation for model-dependent structures Previous commit adds a enumerator as a normalized representation of clock source, while model-dependent structures still use string literals for this purpose. This commit is a preparation for replacement. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: apply new enumerator to normalize the type of clock sourceTakashi Sakamoto
Previous commit allows this driver to detect several types of clock source, while there's no normalized expression for it. This commit adds a new enumerator for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ALSA: bebob: improve signal mode detection for clock sourceTakashi Sakamoto
With BeBoB version 3, current ALSA BeBoB driver detects the type of current clock signal source wrongly. This is due to a lack of proper implementation to parse the information. This commit renews the parser. As a result, this driver detects SYT-Match clock signal, thus it can start streams with two modes; SYT-Match mode and the others. SYT-Match mode will be supported in future commits. There's a constrain about detected internal/external clock source. When detecting external clock source, this driver allows userspace applications to use current sampling rate only. This is due to consider abour synchronization to external clock sources such as S/PDIF, ADAT or word-clock. According to several information from some devices, I guesss that the internal clock of most devices synchronize to IEEE 1394 cycle start packet. In this case, by a usual way, it's detect as 'Sync type of output Music Sub-Unit' connected to 'Sync type of PCR output Unit (oPCR)', and this driver judges it as internal clock. Therefore, userspace applications is allowed to request arbitrary supported sampling rates. On the other hand, several devices based on BeBoB version 3 have additional internal clock. In this case, by a usual way, it's detect as 'Sync/Additional type of External input Unit'. Unfortunately, there's no way to distinguish this sync type from the other external clock sources such as word-clock. In this case, this driver handles it as external and userspace applications is forced to use current sampling rate. I note that when the source of clock is detected as 'Isochronous stream type of input PCR[0]', it's under 'SYT-Match' mode. In this mode, the synchronization clock is generated according to SYT-series in received packets. In this case, this driver generates the series by myself. I experienced this mode often make the device silent suddenly during playbacking. This means that the mode is easy to lost synchronization. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15Revert "drm/i915: Don't skip request retirement if the active list is empty"Jani Nikula
This reverts commit 0aedb1626566efd72b369c01992ee7413c82a0c5. I messed things up while applying [1] to drm-intel-fixes. Rectify. [1] http://mid.gmane.org/1432827156-9605-1-git-send-email-ville.syrjala@linux.intel.com Fixes: 0aedb1626566 ("drm/i915: Don't skip request retirement if the active list is empty") Cc: stable@vger.kernel.org Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-15ALSA: mips: let SND_SGI_O2 select SND_PCMNicholas Mc Guire
Fix the missing dependency on PCM stuff. [Add the same fix for HAL2, too -- tiwai] Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15ASoC: intel: Constify ACPI device idsMathias Krause
Constify the ACPI device ID array, it doesn't need to be writable at runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5670: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5670_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15wm831x_power: Fix off-by-one at free_irq()Takeshi Yoshimura
An error handling in wm831x_power_probe() mistakenly frees a failed-to- request irq as well as other irqs. I added missing decrement of the loop counter. Signed-off-by: Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-15Merge ath-next from ath.gitKalle Valo
Major changes: wil6210: * add modparam for bcast ring size * support hidden SSID * add per-MCS Rx stats
2015-06-15ASoC: max98090: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5640: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5640_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15crypto: aesni - fix crypto_fpu_exit() section mismatchJeremiah Mahler
The '__init aesni_init()' function calls the '__exit crypto_fpu_exit()' function directly. Since they are in different sections, this generates a warning. make CONFIG_DEBUG_SECTION_MISMATCH=y ... WARNING: arch/x86/crypto/aesni-intel.o(.init.text+0x12b): Section mismatch in reference from the function init_module() to the function .exit.text:crypto_fpu_exit() The function __init init_module() references a function __exit crypto_fpu_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of crypto_fpu_exit() so it may be used outside an exit section. Fix the warning by removing the __exit annotation. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-15crypto: nx - replace NX842_MEM_COMPRESS with functionDan Streetman
Replace the NX842_MEM_COMPRESS define with a function that returns the specific platform driver's required working memory size. The common nx-842.c driver refuses to load if there is no platform driver present, so instead of defining an approximate working memory size that's the maximum approximate size of both platform driver's size requirements, the platform driver can directly provide its specific, i.e. sizeof(struct nx842_workmem), size requirements which the 842-nx crypto compression driver will use. This saves memory by both reducing the required size of each driver to the specific sizeof() amount, as well as using the specific loaded platform driver's required amount, instead of the maximum of both. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-15crypto: nx - move include/linux/nx842.h into drivers/crypto/nx/nx-842.hDan Streetman
Move the contents of the include/linux/nx842.h header file into the drivers/crypto/nx/nx-842.h header file. Remove the nx842.h header file and its entry in the MAINTAINERS file. The include/linux/nx842.h header originally was there because the crypto/842.c driver needed it to communicate with the nx-842 hw driver. However, that crypto compression driver was moved into the drivers/crypto/nx/ directory, and now can directly include the nx-842.h header. Nothing else needs the public include/linux/nx842.h header file, as all use of the nx-842 hardware driver will be through the "842-nx" crypto compression driver, since the direct nx-842 api is very limited in the buffer alignments and sizes that it will accept, and the crypto compression interface handles those limitations and allows any alignment and size buffers. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-15rt2800: fix assigning same WCID for different stationsStanislaw Gruszka
On some hardware reading WCID entries table results getting 0xff numbers, no matter of value written there before. This cause assigning the same WCID for different stations and makes not possible to connect to more than one station. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15ASoC: ml26124: Remove duplicate codeAxel Lin
Current code has duplicate code for 16000, 32000 and 48000 sample rates. get_srate() returns negative error code for unsupported rate, so we can remove the duplicate code in the swith cases by calling get_srate() first. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ALSA: hda - Fix audio crackles on Dell Latitude E7x40Takashi Iwai
We still got a report that the audio crackles and noises occur with the recent 4.1 kernels on Dell machines. These machines seem to need similar workarounds that have been applied to the recent Dell XPS 13 models. Since the codec of these machines (Dell Latitute E7240 and E7440) is different from XPS 13's one, we need a new fixup entry. Also, it was confirmed that the previous workaround to disable the widget power-save (commit [219f47e4f964: ALSA: hda - Disable widget power-saving for ALC292 & co]) is no longer needed after this fix. So, this patch includes the partial revert of the commit, too. Reported-and-tested-by: Mihai Donțu <mihai.dontu@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-24 02:17:51 +0000