summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-22iio: trigger: close race condition in acquiring trigger referenceAlison Schofield
In iio_trigger_write_current() we find the trigger we want while holding mutex on the list of triggers, but we don't actually do a get on it while holding mutex. We wait until further validations are completed and we're sure it's the one we want. Race condition is that it could be freed by the time we do the get. Solution is to grab the trigger (iio_trigger_get) as soon as we find it while holding mutex on the list of triggers. If later we decide it's not the right one, put it back. (iio_trigger_put). Signed-off-by: Alison Schofield <amsfield22@gmail.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: imu: st_lsm6dsx: fix typo in gyro sensitivity definitionLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: add runtime power management supportBrian Masney
This patch adds runtime power management support to the isl29028 driver. It defaults to powering off the device after two seconds of inactivity. isl29028_chip_init_and_power_on() currently only zeros the CONFIGURE register on the chip, which will cause the chip to turn off. This patch also renames that function to isl29028_clear_configure_reg() since it is now used in several places. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: only set ALS scale when ALS/IR sensing is enabledBrian Masney
isl29028_chip_init_and_power_on() calls isl29028_set_als_scale() and this is not needed until the user actually needs to take a reading from the ALS/IR sensor. This patch moves the isl29028_set_als_scale() call from isl29028_chip_init_and_power_on() to isl29028_set_als_ir_mode(). This sets the stage for faster resume times from runtime power management if the user is only querying the proximity sensor. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: only set proximity sampling rate when proximity is ↵Brian Masney
enabled isl29028_chip_init_and_power_on() calls isl29028_set_proxim_sampling() and this is not needed until the user actually needs to take a proximity reading. This patch moves the isl29028_set_proxim_sampling() call from isl29028_chip_init_and_power_on() to isl29028_enable_proximity(). This sets the stage for faster resume times from the runtime power management if the user is only querying the ALS/IR sensor. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: remove enable flag from isl29028_enable_proximity()Brian Masney
isl29028_enable_proximity() has a boolean argument named enable. This function is only called once and the enable flag is set to true in that call. This patch removes the enable parameter from that function. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: remove unnecessary parenthesisBrian Masney
isl29028_write_raw() contains unnecessary parenthesis when checking to see if the passed in lux scale is valid. This patch removes the unnecessary parenthesis. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: remove out of memory log messageBrian Masney
If the call to devm_iio_device_alloc() fails, then isl29028_probe() logs a message saying that memory cannot be allocated. The user's system most likely has larger issues at this point. This patch removes that error message since the error code is passed on and the message is not necessary. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: remove unnecessary error logging in ↵Brian Masney
isl29028_chip_init_and_power_on() If the call to isl29028_chip_init_and_power_on() in isl29028_probe() fails, then isl29028_probe() will log an error message. All of the error paths in that call path already have error logging in place. This patch removes the unnecessary logging. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: made error messages consistentBrian Masney
The wording and style of the different error messages was not consistent. This patch makes the wording and style consistent throughout the driver. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: move failure logging into isl29028_set_als_scale()Brian Masney
When isl29028_set_als_scale() fails, it was up to both callers to log the failure message. This patch moves the logging into isl29028_set_als_scale() to reduce the overall amount of code in the driver. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling()Brian Masney
When isl29028_set_proxim_sampling() fails, it was up to both callers to log the failure message. This patch moves the logging into isl29028_set_proxim_sampling() to reduce the overall amount of code in the driver. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: remove unused define ISL29028_DEV_ATTRBrian Masney
The #define ISL29028_DEV_ATTR was not used so this patch removes the unnecessary code. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: change newlines to improve readabilityBrian Masney
Add and remove newlines to improve code readability in preparation for moving the driver out of staging. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: made alignment of variables in struct isl29028_chip ↵Brian Masney
consistent The alignment of the variables in the struct isl29028_chip is not consistent. This changes all of the variables to use consistent alignment to improve the code readability. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: combine isl29028_proxim_get() and isl29028_read_proxim()Brian Masney
isl29028_proxim_get() checks to see if the promixity needs to be enabled on the chip and then calls isl29028_read_proxim(). There are no other callers of isl29028_read_proxim(). The naming between these two functions can be confusing so this patch combines the two to avoid the confusion. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22staging: iio: isl29028: fix alignment of function argumentsBrian Masney
Two separate calls to regmap_update_bits() in isl29028_set_als_scale() and isl29028_set_als_ir_mode() did not have their function arguments on the next line aligned correctly to the open parenthesis. This patch corrects the alignment. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: adc: max1363: Export OF device ID table as module aliasesJavier Martinez Canillas
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: potentiometer: mcp4531: Export OF device ID table as module aliasesJavier Martinez Canillas
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: light: opt3001: Export OF device ID table as module aliasesJavier Martinez Canillas
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: health: max30100: use msleep() for long uncritical delaysNicholas Mc Guire
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 35ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Fixes: commit 4d33615df58b ("iio: light: add MAX30100 oximeter driver support") Link: http://lkml.org/lkml/2017/1/11/377 Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22iio: adc: tlc4541: add support for TI tlc4541 adcPhil Reid
This adds TI's tlc4541 16-bit ADC driver. Which is a single channel ADC. Supports raw and trigger buffer access. Also supports the tlc3541 14-bit device, which has not been tested. Implementation of the tlc3541 is fairly straight forward thou. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22dt-bindings: iio: document MAX11100 ADCJacopo Mondi
Add device tree bindings documentation for Maxim MAX11100 single-channel ADC Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: adc: Add Maxim MAX11100 driverJacopo Mondi
Add iio driver for Maxim MAX11100 single-channel ADC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: bmi160: use variable names for sizeof() operatorAlison Schofield
Replace the types with the actual variable names when using the sizeof() operator. This is kernel preferred style as it's more obvious that it is correct. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: light: cm3605: mark PM functions as __maybe_unusedArnd Bergmann
When CONFIG_PM_SLEEP is disabled, we get a harmless warning drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function] drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function] Marking the functions as possibly unused avoids the warning without needing to add an #ifdef. Fixes: 8afa505c1230 ("iio: light: add driver for Capella CM3605") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: pressure: ms5611: claim direct mode during oversampling changesAlison Schofield
Driver was checking for direct mode before changing oversampling ratios, but was not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode while the oversampling ratios are being updated. Continue to use the drivers private state lock to protect against conflicting direct mode access of the state data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: proximity: sx9500: claim direct mode during raw proximity readsAlison Schofield
Driver was checking for direct mode but not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode during raw reads of proximity data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Vlad Dogaru <ddvlad@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: magnetometer: mag3110: claim direct mode during raw writesAlison Schofield
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-20devicetree: sort the Garmin vendor prefix properly.Greg Kroah-Hartman
The addition of Garmin put it in the incorrect place. This fixes that issue. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 9b27c270d403 ("devicetree: add Garmin vendor prefix") Cc: Rob Herring <robh@kernel.org> Cc: Matt Ranostay <matt@ranostay.consulting> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2017-01-20staging: skein: fix checkpatch block comments warningAbdul Rauf
Fix the following warnings: Block comments should align the * on each line Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: fbtft: fb_ssd1306: Refactor write_vmem()Andy Shevchenko
Refactor write_vmem() for sake of readability. While here, fix indentation in one comment. Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: fbtft: fb_ssd1306: Support smaller screen sizesAndy Shevchenko
There is 64x48 display exists. In order to support that set multiplexer to 48 pixels and window address to proper position in the graphic display data RAM. Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: fbtft: propagate error code from kstrto*()Andy Shevchenko
kstrto*() functions return proper error code. Do propogate it to the user. Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: fbtft: remove custom DMA mapped bufferAndy Shevchenko
There is no need to duplicate what SPI core already does, i.e. mapping buffers for DMA capable transfers. Remove all related pices of code. Note, that code, besides its redundancy, was buggy: DMA address potentially can be 0, SPI slave device has nothing to do with DMA capable device properties and DMA mask in particular. Suggested-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: fbtft: convert fbtft_reset() to be non-atomicAndy Shevchenko
First of all, fbtft in current state doesn't allow to override GPIOs to be optional, like "reset" one. It might be a bug somewhere, but rather out of scope of this fix. Second, not all GPIOs available on the board would be SoC based, some of them might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus any communication with them might sleep. Besides that using udelay() and mdelay() is kinda resource wasteful. Summarize all of the above, convert fbtft_reset() function to non-atomic variant by using gpio_set_value_cansleep(), usleep_range(), and msleep(). Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: rtl8188eu: core: Remove NULL test before vfreeShyam Saini
vfree frees the virtually continuous block of memory beginning at addr. If addr is NULL, no operation is performed. So, NULL test is not needed before vfree(). Signed-off-by: Shyam Saini <mayhs11saini@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: vc04: Fix coding style errors "open brace go on the same line"Adrien Descamps
Open braces for enum, union and struct go on the same line. Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change sfw_counter_t to proper structureJames Simmons
Change sfw_counter_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change srpc_counters_t to proper structureJames Simmons
Change srpc_counters_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lst_test_ping_param_t to proper structureJames Simmons
Change lst_test_ping_param_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lst_test_bulk_param_t to proper structureJames Simmons
Change lst_test_bulk_param_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lst_brw_[type|flags]_t to proper enumJames Simmons
Change lst_brw_[type|flags]_t from typedef to proper enum. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_test_args_t to proper structureJames Simmons
Change lstio_test_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lst_test_type_t to proper enumJames Simmons
Change lst_test_type_t from typedef to proper enum. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_stat_args_t to proper structureJames Simmons
Change lstio_stat_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_batch_info_args_t to proper structureJames Simmons
Change lstio_batch_info_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_batch_list_args_t to proper structureJames Simmons
Change lstio_batch_list_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_batch_query_args_t to proper structureJames Simmons
Change lstio_batch_query_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19staging: lustre: lnet: change lstio_batch_stop_args_t to proper structureJames Simmons
Change lstio_batch_stop_args_t from typedef to proper structure. Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-19 04:22:29 +0000