| Age | Commit message (Collapse) | Author |
|---|
|
In the case of a thread wakeup, wake_affine determines whether a core
will be chosen for the thread on the socket where the thread ran
previously or on the socket of the waker. This is done primarily by
comparing the load of the core where th thread ran previously (prev)
and the load of the waker (this).
commit 11f10e5420f6 ("sched/fair: Use load instead of runnable load
in wakeup path") changed the load computation from the runnable load
to the load average, where the latter includes the load of threads
that have already blocked on the core.
When a short-running daemon processes happens to run on prev, this
change raised the situation that prev could appear to have a greater
load than this, even when prev is actually idle. When prev and this
are on the same socket, the idle prev is detected later, in
select_idle_sibling. But if that does not hold, prev is completely
ignored, causing the waking thread to move to the socket of the waker.
In the case of N mostly active threads on N cores, this triggers other
migrations and hurts performance.
In contrast, before commit 11f10e5420f6, the load on an idle core
was 0, and in the case of a non-idle waker core, the effect of
wake_affine was to select prev as the target for searching for a core
for the waking thread.
To avoid unnecessary migrations, extend wake_affine_idle to check
whether the core where the thread previously ran is currently idle,
and if so simply return that core as the target.
[1] commit 11f10e5420f6ce ("sched/fair: Use load instead of runnable
load in wakeup path")
This particularly has an impact when using the ondemand power manager,
where kworkers run every 0.004 seconds on all cores, increasing the
likelihood that an idle core will be considered to have a load.
The following numbers were obtained with the benchmarking tool
hyperfine (https://github.com/sharkdp/hyperfine) on the NAS parallel
benchmarks (https://www.nas.nasa.gov/publications/npb.html). The
tests were run on an 80-core Intel(R) Xeon(R) CPU E7-8870 v4 @
2.10GHz. Active (intel_pstate) and passive (intel_cpufreq) power
management were used. Times are in seconds. All experiments use all
160 hardware threads.
v5.9/intel-pstate v5.9+patch/intel-pstate
bt.C.c 24.725724+-0.962340 23.349608+-1.607214
lu.C.x 29.105952+-4.804203 25.249052+-5.561617
sp.C.x 31.220696+-1.831335 30.227760+-2.429792
ua.C.x 26.606118+-1.767384 25.778367+-1.263850
v5.9/ondemand v5.9+patch/ondemand
bt.C.c 25.330360+-1.028316 23.544036+-1.020189
lu.C.x 35.872659+-4.872090 23.719295+-3.883848
sp.C.x 32.141310+-2.289541 29.125363+-0.872300
ua.C.x 29.024597+-1.667049 25.728888+-1.539772
On the smaller data sets (A and B) and on the other NAS benchmarks
there is no impact on performance.
This also has a major impact on the splash2x.volrend benchmark of the
parsec benchmark suite that goes from 1m25 without this patch to 0m45,
in active (intel_pstate) mode.
Fixes: 11f10e5420f6 ("sched/fair: Use load instead of runnable load in wakeup path")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/1603372550-14680-1-git-send-email-Julia.Lawall@inria.fr
|
|
Florian reported that all of kernel/sched/ is rebuild when
CONFIG_BLK_DEV_INITRD is changed, which, while not a bug is
unexpected. This is due to us including vmlinux.lds.h.
Jakub explained that the problem is that we put the alignment
requirement on the type instead of on a variable. Type alignment is a
minimum, the compiler is free to pick any larger alignment for a
specific instance of the type (eg. the variable).
So force the type alignment on all individual variable definitions and
remove the undesired dependency on vmlinux.lds.h.
Fixes: 85c2ce9104eb ("sched, vmlinux.lds: Increase STRUCT_ALIGNMENT to 64 bytes for GCC-4.9")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
do_sched_yield() invokes schedule() with interrupts disabled which is
not allowed. This goes back to the pre git era to commit a6efb709806c
("[PATCH] irqlock patch 2.5.27-H6") in the history tree.
Reenable interrupts and remove the misleading comment which "explains" it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87r1pt7y5c.fsf@nanos.tec.linutronix.de
|
|
Document membarrier ordering scenarios in membarrier.c. Thanks to Alan
Stern for refreshing my memory. Now that I have those in mind, it seems
appropriate to serialize them to comments for posterity.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-4-mathieu.desnoyers@efficios.com
|
|
Add comments and memory barrier to kthread_use_mm and kthread_unuse_mm
to allow the effect of membarrier(2) to apply to kthreads accessing
user-space memory as well.
Given that no prior kthread use this guarantee and that it only affects
kthreads, adding this guarantee does not affect user-space ABI.
Refine the check in membarrier_global_expedited to exclude runqueues
running the idle thread rather than all kthreads from the IPI cpumask.
Now that membarrier_global_expedited can IPI kthreads, the scheduler
also needs to update the runqueue's membarrier_state when entering lazy
TLB state.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-3-mathieu.desnoyers@efficios.com
|
|
exit_mm should issue memory barriers after user-space memory accesses,
before clearing current->mm, to order user-space memory accesses
performed prior to exit_mm before clearing tsk->mm, which has the
effect of skipping the membarrier private expedited IPIs.
exit_mm should also update the runqueue's membarrier_state so
membarrier global expedited IPIs are not sent when they are not
needed.
The membarrier system call can be issued concurrently with do_exit
if we have thread groups created with CLONE_VM but not CLONE_THREAD.
Here is the scenario I have in mind:
Two thread groups are created, A and B. Thread group B is created by
issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
Let's assume we have a single thread within each thread group (Thread A
and Thread B).
The AFAIU we can have:
Userspace variables:
int x = 0, y = 0;
CPU 0 CPU 1
Thread A Thread B
(in thread group A) (in thread group B)
x = 1
barrier()
y = 1
exit()
exit_mm()
current->mm = NULL;
r1 = load y
membarrier()
skips CPU 0 (no IPI) because its current mm is NULL
r2 = load x
BUG_ON(r1 == 1 && r2 == 0)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
|
|
It is possible for find_new_ilb() to select the current CPU, however,
this only happens from newidle balancing, in which case need_resched()
will be true, and consequently nohz_csd_func() will not trigger the
softirq.
Exclude the current CPU from becoming an ILB target.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Add CPUPRI_HIGHER above the RT99 priority to denote the CPU is in use
by higher priority tasks (specifically deadline).
XXX: we should probably drive PUSH-PULL from cpupri, that would
automagically result in an RT-PUSH when DL sets cpupri to CPUPRI_HIGHER.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
|
|
This makes the mapping continuous and frees up 100 for other usage.
Prev mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
100 0 (CPUPRI_NORMAL)
1 98 98 1
...
49 50 50 49
50 49 49 50
...
99 0 0 99
New mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
99 0 (CPUPRI_NORMAL)
1 98 98 1
...
49 50 50 49
50 49 49 50
...
99 0 0 99
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
|
|
pri_to_cpu[1] isn't used since cpupri_set(..., newpri) is
never called with newpri = 99.
The valid RT priorities RT1..RT99 (p->rt_priority = [1..99]) map into
cpupri (idx of pri_to_cpu[]) = [2..100]
Current mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
100 0 (CPUPRI_NORMAL)
1 98 98 2
...
49 50 50 50
50 49 49 51
...
99 0 0 100
So cpupri = 1 isn't used.
Reduce the size of pri_to_cpu[] by 1 and adapt the cpupri
implementation accordingly. This will save a useless for loop with an
atomic_read in cpupri_find_fitness() calling __cpupri_find().
New mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
100 0 (CPUPRI_NORMAL)
1 98 98 1
...
49 50 50 49
50 49 49 50
...
99 0 0 99
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200922083934.19275-3-dietmar.eggemann@arm.com
|
|
pri_to_cpu[CPUPRI_IDLE=0] isn't used since cpupri_set(..., newpri) is
never called with newpri = MAX_PRIO (140).
Current mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
140 0 (CPUPRI_IDLE)
100 1 (CPUPRI_NORMAL)
1 98 98 3
...
49 50 50 51
50 49 49 52
...
99 0 0 101
Even when cpupri was introduced with commit 6e0534f27819 ("sched: use a
2-d bitmap for searching lowest-pri CPU") in v2.6.27, only
(1) CPUPRI_INVALID (-1),
(2) MAX_RT_PRIO (100),
(3) an RT prio (RT1..RT99)
were used as newprio in cpupri_set(..., newpri) -> convert_prio(newpri).
MAX_RT_PRIO is used only in dec_rt_tasks() -> dec_rt_prio() ->
dec_rt_prio_smp() -> cpupri_set() in case of !rt_rq->rt_nr_running.
I.e. it stands for a non-rt task, including the IDLE task.
Commit 57785df5ac53 ("sched: Fix task priority bug") removed code in
v2.6.33 which did set the priority of the IDLE task to MAX_PRIO.
Although this happened after the introduction of cpupri, it didn't have
an effect on the values used for cpupri_set(..., newpri).
Remove CPUPRI_IDLE and adapt the cpupri implementation accordingly.
This will save a useless for loop with an atomic_read in
cpupri_find_fitness() calling __cpupri_find().
New mapping:
p->rt_priority p->prio newpri cpupri
-1 -1 (CPUPRI_INVALID)
100 0 (CPUPRI_NORMAL)
1 98 98 2
...
49 50 50 50
50 49 49 51
...
99 0 0 100
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200922083934.19275-2-dietmar.eggemann@arm.com
|
|
When change sched_rt_{runtime, period}_us, we validate that the new
settings should at least accommodate the currently allocated -dl
bandwidth:
sched_rt_handler()
--> sched_dl_bandwidth_validate()
{
new_bw = global_rt_runtime()/global_rt_period();
for_each_possible_cpu(cpu) {
dl_b = dl_bw_of(cpu);
if (new_bw < dl_b->total_bw) <-------
ret = -EBUSY;
}
}
But under CONFIG_SMP, dl_bw is per root domain , but not per CPU,
dl_b->total_bw is the allocated bandwidth of the whole root domain.
Instead, we should compare dl_b->total_bw against "cpus*new_bw",
where 'cpus' is the number of CPUs of the root domain.
Also, below annotation(in kernel/sched/sched.h) implied implementation
only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept
evolving till got merged(v9), but the annotation remains unchanged,
meaningless and misleading, update it.
* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
* - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
* - dl_total_bw array contains, in the i-eth element, the currently
* allocated bandwidth on the i-eth CPU.
[1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/
Fixes: 332ac17ef5bf ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks")
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com
|
|
Under CONFIG_SMP, dl_bw is per root domain, but not per CPU.
When checking or updating dl_bw, currently iterating every CPU is
overdoing, just need iterate each root domain once.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/78d21ee792cc48ff79e8cd62a5f26208463684d6.1602171061.git.iwtbavbm@gmail.com
|
|
When the sched_schedstat changes from 0 to 1, some sched se maybe
already in the runqueue, the se->statistics.wait_start will be 0.
So it will let the (rq_of(cfs_rq)) - se->statistics.wait_start)
wrong. We need to avoid this scenario.
Signed-off-by: jun qian <qianjun.kernel@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20201015064846.19809-1-qianjun.kernel@gmail.com
|
|
Introduce sev_status and initialize it together with sme_me_mask to have
an indicator which SEV features are enabled.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20201028164659.27002-2-joro@8bytes.org
|
|
RX and TX delay are provided by ethernet PHY. Reflect that in ethernet
node.
Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes")
Signed-off-by: Nenad Peric <nperic@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20201028115817.68113-1-nperic@gmail.com
|
|
Most of the helpers to retrieve vc4 structures from the DRM base structures
rely on the fact that the first member of the vc4 structure is the DRM one
and just cast the pointers between them.
However, this is pretty fragile especially since there's no check to make
sure that the DRM structure is indeed at the offset 0 in the structure, so
let's use container_of to make it more robust.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
|
|
Since the components for a given device in ASoC are identified by their
name, it makes sense to add one even though it's not strictly necessary.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
|
|
When built as a loadable module, coresight now causes a warning about
missing license information.
WARNING: modpost: missing MODULE_LICENSE() in drivers/hwtracing/coresight/coresight.o
Fixes: 8e264c52e1da ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201026160205.3704789-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock)
creates a lock dependecy that could possibly deadlock.
Lockdep warns:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.10.0-rc1pdx86+ #8 Not tainted
-----------------------------------------------------
systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0
and this task is already holding:
ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810
which would create a new lock dependency:
(&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2}
Create the files a bit later after lock is released.
Fixes: 673d74683627 ("usb: xhci: add debugfs support for ep with stream")
CC: Li Jun <jun.li@nxp.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this,
need to disable a bit which is enable in sparse controller.
Cc: stable@vger.kernel.org #v4.19+
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An incorrect sizeof() is being used, sizeof(rhub->ports) is not
correct, it should be sizeof(*rhub->ports). This bug did not
cause any issues because it just so happens the sizes are the same.
Fixes: bcaa9d5c5900 ("xhci: Create new structures to store xhci port information")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
chip->port_type and chip->pwr_opmode are enums and when GCC considers them
as unsigned, the conditions are never met.
This patch takes advantage of the ret variable and fixes the following
warnings:
drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero.
drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When stusb160x driver is built as a module, no modalias information is
available, and it prevents the module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fix this issue.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Nesting container_of() causes warnings with W=2, which is
annoying if it happens in headers and fills the build log
like:
In file included from drivers/clk/qcom/clk-alpha-pll.c:6:
drivers/clk/qcom/clk-alpha-pll.c: In function 'clk_alpha_pll_hwfsm_enable':
include/linux/kernel.h:852:8: warning: declaration of '__mptr' shadows a previous local [-Wshadow]
852 | void *__mptr = (void *)(ptr); \
| ^~~~~~
drivers/clk/qcom/clk-alpha-pll.c:155:31: note: in expansion of macro 'container_of'
155 | #define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
| ^~~~~~~~~~~~
drivers/clk/qcom/clk-regmap.h:27:28: note: in expansion of macro 'container_of'
27 | #define to_clk_regmap(_hw) container_of(_hw, struct clk_regmap, hw)
| ^~~~~~~~~~~~
drivers/clk/qcom/clk-alpha-pll.c:155:44: note: in expansion of macro 'to_clk_regmap'
155 | #define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
| ^~~~~~~~~~~~~
drivers/clk/qcom/clk-alpha-pll.c:254:30: note: in expansion of macro 'to_clk_alpha_pll'
254 | struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
| ^~~~~~~~~~~~~~~~
include/linux/kernel.h:852:8: note: shadowed declaration is here
852 | void *__mptr = (void *)(ptr); \
| ^~~~~~
Redefine two copies of the to_clk_regmap() macro as inline functions
to avoid a lot of these.
Fixes: ea11dda9e091 ("clk: meson: add regmap clocks")
Fixes: 085d7a455444 ("clk: qcom: Add a regmap type clock struct")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201026161411.3708639-1-arnd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove trailing white spaces. No functional/substantive change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201016151528.7553-4-krzk@kernel.org
|
|
Jeongtae Park has not been active on LKML:
https://lore.kernel.org/lkml/?q=f%3A%22Jeongtae+Park%22
Remove him from the Samsung S5P MFC driver entry.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jeongtae Park <jtp.park@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Link: https://lore.kernel.org/r/20201016151528.7553-3-krzk@kernel.org
|
|
Kyungmin Park maintained and contributed to some of the upstreamed
S5Pv210 and Exynos4210 machines - as described in commit 10ffa96407b2
("MAINTAINERS: add maintainer of Samsung Mobile Machine support").
However the entry in maintainers got slightly twisted by
commit 004bbd3c01d4 ("MAINTAINERS: remove non existent files") -
the directory matching pattern was changed from specific machines to
the entire S5Pv210.
Anyway since long time, all S5Pv210 maintenance is covered by the
Samsung ARM architectures maintainer entry and Krzysztof Kozlowski, so
move Kyungmin Park to the CREDITS.
There was also no activity on LKML regarding other maintained drivers:
https://lore.kernel.org/lkml/?q=f%3A%22Kyungmin+Park%22
Dear Kyungmin Park, thank you for all the effort you put in to the
upstream Samsung support.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Link: https://lore.kernel.org/r/20201016151528.7553-1-krzk@kernel.org
|
|
Kamil Debski has not been active on LKML since 2017:
https://lore.kernel.org/lkml/?q=f%3A%22Kamil+Debski%22
Move Kamil Debski to the CREDITS file. Thank you for the effort you put
in to the upstream Linux kernel work.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Kamil Debski <kamil@wypas.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20201016151528.7553-1-krzk@kernel.org
|
|
Linux 5.10-rc1
|
|
Linux 5.10-rc1
|
|
Linux 5.10-rc1
|
|
Coredump logics needs to report not only the registers of the dumping
thread, but (since 2.5.43) those of other threads getting killed.
Doing that might require extra state saved on the stack in asm glue at
kernel entry; signal delivery logics does that (we need to be able to
save sigcontext there, at the very least) and so does seccomp.
That covers all callers of do_coredump(). Secondary threads get hit with
SIGKILL and caught as soon as they reach exit_mm(), which normally happens
in signal delivery, so those are also fine most of the time. Unfortunately,
it is possible to end up with secondary zapped when it has already entered
exit(2) (or, worse yet, is oopsing). In those cases we reach exit_mm()
when mm->core_state is already set, but the stack contents is not what
we would have in signal delivery.
At least on two architectures (alpha and m68k) it leads to infoleaks - we
end up with a chunk of kernel stack written into coredump, with the contents
consisting of normal C stack frames of the call chain leading to exit_mm()
instead of the expected copy of userland registers. In case of alpha we
leak 312 bytes of stack. Other architectures (including the regset-using
ones) might have similar problems - the normal user of regsets is ptrace
and the state of tracee at the time of such calls is special in the same
way signal delivery is.
Note that had the zapper gotten to the exiting thread slightly later,
it wouldn't have been included into coredump anyway - we skip the threads
that have already cleared their ->mm. So let's pretend that zapper always
loses the race. IOW, have exit_mm() only insert into the dumper list if
we'd gotten there from handling a fatal signal[*]
As the result, the callers of do_exit() that have *not* gone through get_signal()
are not seen by coredump logics as secondary threads. Which excludes voluntary
exit()/oopsen/traps/etc. The dumper thread itself is unaffected by that,
so seccomp is fine.
[*] originally I intended to add a new flag in tsk->flags, but ebiederman pointed
out that PF_SIGNALED is already doing just what we need.
Cc: stable@vger.kernel.org
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix synthetic event "strcat" overrun
New synthetic event code used strcat() and miscalculated the ending,
causing the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which
has all the mechanisms in place to protect against writing more than
what is allocated, and cleans up the code a bit"
* tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, synthetic events: Replace buggy strcat() with seq_buf operations
|
|
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No functional change; just reserve the feature bit for now so that VMMs
can start to implement it.
This will allow the host to indicate that MSI emulation supports 15-bit
destination IDs, allowing up to 32768 CPUs without interrupt remapping.
cf. https://patchwork.kernel.org/patch/11816693/ for qemu
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4cd59bed05f4b7410d3d1ffd1e997ab53683874d.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On exception entry, the kernel explicitly resets the PSTATE.TCO (tag
check override) so that any kernel memory accesses will be checked (the
bit is restored on exception return). This has the side-effect that the
uaccess routines will not honour the PSTATE.TCO that may have been set
by the user prior to a syscall.
There is no issue in practice since PSTATE.TCO is expected to be used
only for brief periods in specific routines (e.g. garbage collection).
To control the tag checking mode of the uaccess routines, the user will
have to invoke a corresponding prctl() call.
Document the kernel behaviour w.r.t. PSTATE.TCO accordingly.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: df9d7a22dd21 ("arm64: mte: Add Memory Tagging Extension documentation")
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This switches ext4 over to the generic support provided in libfs.
Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_ext_search_right() will read more extent blocks and call put_bh
after we get the information we need. However, ret_ex will break this
and may cause use-after-free once pagecache has been freed. Fix it by
copying the extent structure if needed.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
With this fix, fast commit recovery code uses IS_ERR() for path
returned by ext4_find_extent.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027204342.2794949-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Mauro says:
This series contain the patches from a previous series I sent:
[PATCH v2 00/24] Documentation build fixes against next-20201013
Plus other patches I sent later, against other versions of linux-next between
20201013 and v5.10-rc1.
It fixes most of the remaining documentation build warnings.
There were some changes from v2, as I changed some patches due to the
feedback received, and added reviewed-by/acked-by to several of them.
After this series, there will be just 3 warnings at include/kunit/test.h, whose
fixes were already applied by Shuah via her tree at linux-next. Hopefully, she
will be sending it upstream anytime toon. So, I dropped the fix from my trees.
The vast majority of patches here are also on my linux-next tree, as my
original plan were to send them upstream by the end of the merge window.
I'll drop from it once they get merged.
As those patches are fixes, I guess it should be ok to get them merged for
-rc2 or -rc3.
[jc: removed DRM and JBD patches applied elsewhere]
|
|
Commit afb585a97f81 "ext4: data=journal: write-protect pages on
j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write()
to track inode ranges whose mappings need to get write-protected during
transaction commits. However the added calls use wrong start of a range
(0 instead of page offset) and so write protection is not necessarily
effective. Use correct range start to fix the problem.
Fixes: afb585a97f81 ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The kernel-doc markup that documents _fc_replay_callback is
missing an asterisk, causing this warning:
../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s'
When building the docs.
Fixes: 609f928af48f ("jbd2: fast commit recovery path")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Ext4's fast commit related transient states should use
sb->s_mount_flags instead of persistent sb->s_mount_state.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Fixes: 6866d7b3f2bb ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As reported by Sphinx 2.4.4:
docs/Documentation/admin-guide/LSM/SafeSetID.rst:110: WARNING: Title underline too short.
Note on GID policies and setgroups()
==================
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4afa281c170daabd1ce522653d5d5d5078ebd92c.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
A kernel-doc markup can't be mixed with a random comment,
as it causes parsing problems.
While here, change an invalid kernel-doc markup into
a common comment.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e899f50404e94ac9a7c3267dd34f951c1a44fb2b.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The kernel-doc markups there is violating the expected
syntax, causing it to not parse the name of the
markup identifier properly, preventing it to check
if the kernel-doc matches the #define below each
markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/697640045663f1366beb15e76e78b420dac5f5a2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
dm_comressor_info -> dm_compressor_info
The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9de495fa791596609eb2e73ba71cea99e09b2689.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
