| Age | Commit message (Collapse) | Author |
|---|
|
If 'n' or 'size' isn't builtin constant, we used to call __kmalloc()
before commit 7bd230a26648 ("mm/slab: enable slab allocation tagging for
kmalloc and friends"), which inadvertedly changed both paths to
kmalloc_noprof().
As Harry Yoo points out we can just call kmalloc_noprof()
unconditionally. If the compiler knows n and size are constants it
doesn't guarantee that bytes will be also seen as constant, and that is
the important test in kmalloc_noprof() anyway, so we can just defer to
it always.
[ vbabka@suse.cz: change as Harry suggested and adjust commit log ]
Fixes: 7bd230a26648 ("mm/slab: enable slab allocation tagging for kmalloc and friends")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The total size calculated for EPC can overflow u64 given the added up page
for SECS. Further, the total size calculated for shmem can overflow even
when the EPC size stays within limits of u64, given that it adds the extra
space for 128 byte PCMD structures (one for each page).
Address this by pre-evaluating the micro-architectural requirement of
SGX: the address space size must be power of two. This is eventually
checked up by ECREATE but the pre-check has the additional benefit of
making sure that there is some space for additional data.
Fixes: 888d24911787 ("x86/sgx: Add SGX_IOC_ENCLAVE_CREATE")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250305050006.43896-1-jarkko@kernel.org
Closes: https://lore.kernel.org/linux-sgx/c87e01a0-e7dd-4749-a348-0980d3444f04@stanley.mountain/
|
|
Smatch warns about this whitespace damage:
arch/x86/lib/delay.c:134 delay_halt_mwaitx() warn: inconsistent indenting
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250305063515.3951-1-hanchunchao@inspur.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD microcode loading fixes from Borislav Petkov:
- Load only sha256-signed microcode patch blobs
- Other good cleanups
* tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load only SHA256-checksummed patches
x86/microcode/AMD: Add get_patch_level()
x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration
x86/microcode/AMD: Merge early_apply_microcode() into its single callsite
x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations
x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
|
|
Unfortunately, __builtin_dynamic_object_size() does not take into account
flexible array sizes, even when they are sized by __counted_by. As a
result, the size tests for the flexible arrays need to be separated to
get an accurate check of the compiler's behavior. While at it, fully test
sizeof, __struct_size (bdos(..., 0)), and __member_size (bdos(..., 1)).
I still think this is a compiler design issue, but there's not much to
be done about it currently beyond adjusting these tests. GCC and Clang
agree on this behavior at least. :)
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/lkml/e1a1531d-6968-4ae8-a3b5-5ea0547ec4b3@t-8ch.de/
Fixes: 9dd5134c6158 ("kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX()")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
'misc.2025.03.04a', 'srcu.2025.02.05a' and 'torture.2025.02.05a'
|
|
This commit tests lazy preemption by causing the TREE07 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
This commit tests lazy preemption by causing the TREE10 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
PREEMPT_LAZY can be enabled stand-alone or alongside PREEMPT_DYNAMIC
which allows for dynamic switching of preemption models.
The choice of PREEMPT_RCU or not, however, is fixed at compile time.
Given that PREEMPT_RCU makes some trade-offs to optimize for latency
as opposed to throughput, configurations with limited preemption
might prefer the stronger forward-progress guarantees of PREEMPT_RCU=n.
Accordingly, explicitly limit PREEMPT_RCU=y to the latency oriented
preemption models: PREEMPT, PREEMPT_RT, and the runtime configurable
model PREEMPT_DYNAMIC.
This means the throughput oriented models, PREEMPT_NONE,
PREEMPT_VOLUNTARY, and PREEMPT_LAZY will run with PREEMPT_RCU=n.
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The rcutorture_one_extend_check() function's second last check assumes
that "preempt_count() & PREEMPT_MASK" is non-zero only if
RCUTORTURE_RDR_PREEMPT or RCUTORTURE_RDR_SCHED bit is set.
This works for preemptible RCU and for non-preemptible RCU running in
a non-preemptible kernel. But it fails for non-preemptible RCU running
in a preemptible kernel because then rcu_read_lock() is just
preempt_disable(), which increases preempt count.
This commit therefore adjusts this check to take into account the case
fo non-preemptible RCU running in a preemptible kernel.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The rcutorture_one_extend_check() function's last check assumes that
if cur_ops->readlock_nesting() returns greater than zero, either the
RCUTORTURE_RDR_RCU_1 or the RCUTORTURE_RDR_RCU_2 bit must be set, that
is, there must be at least one rcu_read_lock() in effect.
This works for preemptible RCU and for non-preemptible RCU running in
a non-preemptible kernel. But it fails for non-preemptible RCU running
in a preemptible kernel because then RCU's cur_ops->readlock_nesting()
function, which is rcu_torture_readlock_nesting(), will return
the PREEMPT_MASK mask bits from preempt_count(). The result will
be greater than zero if preemption is disabled, including by the
RCUTORTURE_RDR_PREEMPT and RCUTORTURE_RDR_SCHED bits.
This commit therefore adjusts this check to take into account the case
fo non-preemptible RCU running in a preemptible kernel.
[boqun: Fix the if condition and add comment]
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171415.8ec87c87-lkp@intel.com
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
To reduce RCU noise for nohz_full configurations, osnoise depends
on cond_resched() providing quiescent states for PREEMPT_RCU=n
configurations. For PREEMPT_RCU=y configurations -- where
cond_resched() is a stub -- we do this by directly calling
rcu_momentary_eqs().
With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), however, we have a
configuration with (PREEMPTION=y, PREEMPT_RCU=n) where neither
of the above can help.
Handle that by providing an explicit quiescent state here for all
configurations.
As mentioned above this is not needed for non-stubbed cond_resched(),
but, providing a quiescent state here just pulls in one that a future
cond_resched() would provide, so doesn't cause any extra work for
this configuration.
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Switch for using of get_state_synchronize_rcu_full() and
poll_state_synchronize_rcu_full() pair to debug a normal
synchronize_rcu() call.
Just using "not" full APIs to identify if a grace period is
passed or not might lead to a false-positive kernel splat.
It can happen, because get_state_synchronize_rcu() compresses
both normal and expedited states into one single unsigned long
value, so a poll_state_synchronize_rcu() can miss GP-completion
when synchronize_rcu()/synchronize_rcu_expedited() concurrently
run.
To address this, switch to poll_state_synchronize_rcu_full() and
get_state_synchronize_rcu_full() APIs, which use separate variables
for expedited and normal states.
Reported-by: cheung wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/lkml/Z5ikQeVmVdsWQrdD@pc636/T/
Fixes: 988f569ae041 ("rcu: Reduce synchronize_rcu() latency")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250227131613.52683-3-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Add extra parameters for rcutorture module. One is the "nfakewriters"
which is set -1. There will be created number of test-kthreads which
correspond to number of CPUs in a test system. Those threads randomly
invoke synchronize_rcu() call.
Apart of that "rcu_normal" is set to 1, because it is specifically for
a normal synchronize_rcu() testing, also a newly added parameter which
is "rcu_normal_wake_from_gp" is set to 1 also. That prevents interaction
with other callbacks in a system.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20250227131613.52683-2-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently "nfakewriters" parameter can be set to any value but
there is no possibility to adjust it automatically based on how
many CPUs a system has where a test is run on.
To address this, if the "nfakewriters" is set to negative it will
be adjusted to num_online_cpus() during torture initialization.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20250227131613.52683-1-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Kernels built with CONFIG_PREEMPT_RT=y can lose significant console output
and shutdown time, which hides shutdown-time RCU issues from rcutorture.
Therefore, make pr_flush() public and invoke it after then last print
in kernel_power_off().
[ paulmck: Apply John Ogness feedback. ]
[ paulmck: Appy Sebastian Andrzej Siewior feedback. ]
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/5f743488-dc2a-4f19-bdda-cf50b9314832@paulmck-laptop
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The WARN_ON_ONCE() in ct_kernel_exit_state() follows the call to
ct_state_inc(), which means that RCU is not watching this WARN_ON_ONCE().
This can (and does) result in extraneous lockdep warnings when this
WARN_ON_ONCE() triggers. These extraneous warnings are the opposite
of helpful.
Therefore, invert the WARN_ON_ONCE() condition and move it before the
call to ct_state_inc(). This does mean that the ct_state_inc() return
value can no longer be used in the WARN_ON_ONCE() condition, so discard
this return value and instead use a call to rcu_is_watching_curr_cpu().
This call is executed only in CONFIG_RCU_EQS_DEBUG=y kernels, so there
is no added overhead in production use.
[Boqun: Add the subsystem tag in the title]
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/bd911cd9-1fe9-447c-85e0-ea811a1dc896@paulmck-laptop
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Analysis of an rcutorture callback-based forward-progress test failure was
hampered by the lack of ->cblist segment lengths. This commit therefore
adds this information, so that what would have been ".W85620.N." (there
are some callbacks waiting for grace period sequence number 85620 and
some number more that have not yet been assigned to a grace period)
now prints as ".W2(85620).N6." (there are 2 callbacks waiting for grace
period 85620 and 6 not yet assigned to a grace period). Note that
"D" (done), "N" (next and not yet assigned to a grace period, and "B"
(bypass, also not yet assigned to a grace period) have just the number
of callbacks without the parenthesized grace-period sequence number.
In contrast, "W" (waiting for the current grace period) and "R" (ready
to wait for the next grace period to start) both have parenthesized
grace-period sequence numbers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The timer and hrtimer softirq processing has moved to dedicated threads
for kernels built with CONFIG_IRQ_FORCED_THREADING=y. This results in
timers not expiring until later in early boot, which in turn causes the
RCU Tasks self-tests to hang in kernels built with CONFIG_PROVE_RCU=y,
which further causes the entire kernel to hang. One fix would be to
make timers work during this time, but there are no known users of RCU
Tasks grace periods during that time, so no justification for the added
complexity. Not yet, anyway.
This commit therefore moves the call to rcu_init_tasks_generic() from
kernel_init_freeable() to a core_initcall(). This works because the
timer and hrtimer kthreads are created at early_initcall() time.
Fixes: 49a17639508c3 ("softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <linux-trace-kernel@vger.kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The get_state_synchronize_rcu_full() and poll_state_synchronize_rcu_full()
functions use the root rcu_node structure's ->gp_seq field to detect
the beginnings and ends of grace periods, respectively. This choice is
necessary for the poll_state_synchronize_rcu_full() function because
(give or take counter wrap), the following sequence is guaranteed not
to trigger:
get_state_synchronize_rcu_full(&rgos);
synchronize_rcu();
WARN_ON_ONCE(!poll_state_synchronize_rcu_full(&rgos));
The RCU callbacks that awaken synchronize_rcu() instances are
guaranteed not to be invoked before the root rcu_node structure's
->gp_seq field is updated to indicate the end of the grace period.
However, these callbacks might start being invoked immediately
thereafter, in particular, before rcu_state.gp_seq has been updated.
Therefore, poll_state_synchronize_rcu_full() must refer to the
root rcu_node structure's ->gp_seq field. Because this field is
updated under this structure's ->lock, any code following a call to
poll_state_synchronize_rcu_full() will be fully ordered after the
full grace-period computation, as is required by RCU's memory-ordering
semantics.
By symmetry, the get_state_synchronize_rcu_full() function should also
use this same root rcu_node structure's ->gp_seq field. But it turns out
that symmetry is profoundly (though extremely infrequently) destructive
in this case. To see this, consider the following sequence of events:
1. CPU 0 starts a new grace period, and updates rcu_state.gp_seq
accordingly.
2. As its first step of grace-period initialization, CPU 0 examines
the current CPU hotplug state and decides that it need not wait
for CPU 1, which is currently offline.
3. CPU 1 comes online, and updates its state. But this does not
affect the current grace period, but rather the one after that.
After all, CPU 1 was offline when the current grace period
started, so all pre-existing RCU readers on CPU 1 must have
completed or been preempted before it last went offline.
The current grace period therefore has nothing it needs to wait
for on CPU 1.
4. CPU 1 switches to an rcutorture kthread which is running
rcutorture's rcu_torture_reader() function, which starts a new
RCU reader.
5. CPU 2 is running rcutorture's rcu_torture_writer() function
and collects a new polled grace-period "cookie" using
get_state_synchronize_rcu_full(). Because the newly started
grace period has not completed initialization, the root rcu_node
structure's ->gp_seq field has not yet been updated to indicate
that this new grace period has already started.
This cookie is therefore set up for the end of the current grace
period (rather than the end of the following grace period).
6. CPU 0 finishes grace-period initialization.
7. If CPU 1’s rcutorture reader is preempted, it will be added to
the ->blkd_tasks list, but because CPU 1’s ->qsmask bit is not
set in CPU 1's leaf rcu_node structure, the ->gp_tasks pointer
will not be updated. Thus, this grace period will not wait on
it. Which is only fair, given that the CPU did not come online
until after the grace period officially started.
8. CPUs 0 and 2 then detect the new grace period and then report
a quiescent state to the RCU core.
9. Because CPU 1 was offline at the start of the current grace
period, CPUs 0 and 2 are the only CPUs that this grace period
needs to wait on. So the grace period ends and post-grace-period
cleanup starts. In particular, the root rcu_node structure's
->gp_seq field is updated to indicate that this grace period
has now ended.
10. CPU 2 continues running rcu_torture_writer() and sees that,
from the viewpoint of the root rcu_node structure consulted by
the poll_state_synchronize_rcu_full() function, the grace period
has ended. It therefore updates state accordingly.
11. CPU 1 is still running the same RCU reader, which notices this
update and thus complains about the too-short grace period.
The fix is for the get_state_synchronize_rcu_full() function to use
rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq field.
With this change in place, if step 5's cookie indicates that the grace
period has not yet started, then any prior code executed by CPU 2 must
have happened before CPU 1 came online. This will in turn prevent CPU
1's code in steps 3 and 11 from spanning CPU 2's grace-period wait,
thus preventing CPU 1 from being subjected to a too-short grace period.
This commit therefore makes this change. Note that there is no change to
the poll_state_synchronize_rcu_full() function, which as noted above,
must continue to use the root rcu_node structure's ->gp_seq field.
This is of course an asymmetry between these two functions, but is an
asymmetry that is absolutely required for correct operation. It is a
common human tendency to greatly value symmetry, and sometimes symmetry
is a wonderful thing. Other times, symmetry results in poor performance.
But in this case, symmetry is just plain wrong.
Nevertheless, the asymmetry does require an additional adjustment.
It is possible for get_state_synchronize_rcu_full() to see a given
grace period as having started, but for an immediately following
poll_state_synchronize_rcu_full() to see it as having not yet started.
Given the current rcu_seq_done_exact() implementation, this will
result in a false-positive indication that the grace period is done
from poll_state_synchronize_rcu_full(). This is dealt with by making
rcu_seq_done_exact() reach back three grace periods rather than just
two of them.
However, simply changing get_state_synchronize_rcu_full() function to
use rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq
field results in a theoretical bug in kernels booted with
rcutree.rcu_normal_wake_from_gp=1 due to the following sequence of
events:
o The rcu_gp_init() function invokes rcu_seq_start() to officially
start a new grace period.
o A new RCU reader begins, referencing X from some RCU-protected
list. The new grace period is not obligated to wait for this
reader.
o An updater removes X, then calls synchronize_rcu(), which queues
a wait element.
o The grace period ends, awakening the updater, which frees X
while the reader is still referencing it.
The reason that this is theoretical is that although the grace period
has officially started, none of the CPUs are officially aware of this,
and thus will have to assume that the RCU reader pre-dated the start of
the grace period. Detailed explanation can be found at [2] and [3].
Except for kernels built with CONFIG_PROVE_RCU=y, which use the polled
grace-period APIs, which can and do complain bitterly when this sequence
of events occurs. Not only that, there might be some future RCU
grace-period mechanism that pulls this sequence of events from theory
into practice. This commit therefore also pulls the call to
rcu_sr_normal_gp_init() to precede that to rcu_seq_start().
Although this fixes commit 91a967fd6934 ("rcu: Add full-sized polling
for get_completed*() and poll_state*()"), it is not clear that it is
worth backporting this commit. First, it took me many weeks to convince
rcutorture to reproduce this more frequently than once per year.
Second, this cannot be reproduced at all without frequent CPU-hotplug
operations, as in waiting all of 50 milliseconds from the end of the
previous operation until starting the next one. Third, the TREE03.boot
settings cause multi-millisecond delays during RCU grace-period
initialization, which greatly increase the probability of the above
sequence of events. (Don't do this in production workloads!) Fourth,
the TREE03 rcutorture scenario was modified to use four-CPU guest OSes,
to have a single-rcu_node combining tree, no testing of RCU priority
boosting, and no random preemption, and these modifications were
necessary to reproduce this issue in a reasonable timeframe. Fifth,
extremely heavy use of get_state_synchronize_rcu_full() and/or
poll_state_synchronize_rcu_full() is required to reproduce this, and as
of v6.12, only kfree_rcu() uses it, and even then not particularly
heavily.
[boqun: Apply the fix [1], and add the comment before the moved
rcu_sr_normal_gp_init(). Additional links are added for explanation.]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/rcu/d90bd6d9-d15c-4b9b-8a69-95336e74e8f4@paulmck-laptop/ [1]
Link: https://lore.kernel.org/rcu/20250303001507.GA3994772@joelnvbox/ [2]
Link: https://lore.kernel.org/rcu/Z8bcUsZ9IpRi1QoP@pc636/ [3]
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.
Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luca Weiss says:
====================
Fixes for IPA v4.7
During bringup of IPA v4.7 unfortunately some bits were missed, and it
couldn't be tested much back then due to missing features in tqftpserv
which caused the modem to not enable correctly.
Especially the last commit is important since it makes mobile data
actually functional on SoCs with IPA v4.7 like SM6350 - used on the
Fairphone 4. Before that, you'd get an IP address on the interface but
then e.g. ping never got any response back.
====================
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the checksum option for these two endpoints in order to allow
mobile data to actually work. Without this, no packets seem to make it
through the IPA.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per downstream reference, max_writes should be 12 and max_reads
should be 13.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f4c5c1eaf02f003d7d588ba6706aa71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78d63a2a621b30caff8b9424160c6c89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a8153627520a ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997979fbf11765281ef752f07c5cf25bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Make __per_cpu_hot_end marker point to the end of the percpu cache
hot data, not to the end of the percpu cache hot section.
This fixes CONFIG_MPENTIUM4 case where X86_L1_CACHE_SHIFT
is set to 7 (128 bytes).
Also update assert message accordingly.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250304173455.89361-1-ubizjak@gmail.com
Closes: https://lore.kernel.org/lkml/Z8a-NVJs-pm5W-mG@gmail.com/
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-12-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-11-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-10-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-9-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-8-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-7-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-6-brgerst@gmail.com
|
