summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-02net/mlx4_core: Fix sl_to_vl_change bit offset in flags2 dumpJack Morgenstein
The index value in function dump_dev_cap_flags2() for outputting "sl to vl mapping table change event support" needs to be consistent with the value of the enumerated constant MLX4_DEV_CAP_FLAG2_SL_TO_VL_CHANGE_EVENT defined in file include/linux/mlx4_device.h The change here restores that consistency. Fixes: fd10ed8e6f42 ("IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) supportInbar Karmy
Currently when WoL is supported but disabled, ethtool reports: "Supports Wake-on: d". Fix the indication of Wol support, so that the indication remains "g" all the time if the NIC supports WoL. Tested: As accepted, when NIC supports WoL- ethtool reports: Supports Wake-on: g Wake-on: d when NIC doesn't support WoL- ethtool reports: Supports Wake-on: d Wake-on: d Fixes: 14c07b1358ed ("mlx4: Wake on LAN support") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02Merge branch 'lan78xx-Fixes'David S. Miller
Nisar Sayed says: ==================== lan78xx: Fixes to lan78xx driver This series of patches are for lan78xx driver. These patches fixes potential issues associated with lan78xx driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: Fix to handle hard_header_len updateNisar Sayed
Fix to handle hard_header_len update When ifconfig up/down sequence is initiated hard_header_len get updated incrementally for each ifconfig up /down sequence, this leads invalid hard_header_len, moving to lan78xx_bind to have one time update of hard_header_len addresses the issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: USB fast connect/disconnect crash fixNisar Sayed
USB fast connect/disconnect crash fix When USB plugged/unplugged at fast rate, lan78xx_mdio_init() in lan78xx_bind() failing case is not handled. Whenever lan78xx_mdio_init() failed, dev->mdiobus will be freed, however since lan78xx_bind() not consider as error and try to proceed for further initialization in lan78xx_probe() which leads system hung/crash. Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind(). Hence halting the failed cases right manner fixes the system crash/hung issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02Merge tag 'platform-drivers-x86-v4.13-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Fix two bugs under error or abnormal usage conditions. Correct a config dependency: dell-wmi: - Fix driver interface version query wmi: - Fix error handling in acpi_wmi_init() peaq-wmi: - select INPUT_POLLDEV" * tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-wmi: Fix driver interface version query platform/x86: wmi: Fix error handling in acpi_wmi_init() platform/x86: peaq-wmi: select INPUT_POLLDEV
2017-08-02Merge tag 'sunxi-clk-fixes-for-4.13' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull one Allwinner clock fix from Chen-Yu Tsai: One critical clock fix for sun5i (A10s/A13/R8) which enables propagation of clock rate changes from the "cpu" clock to it's parent PLL clock. This fixes cpufreq related crashes that have been observed on KernelCI with the C.H.I.P. and multi_v7_defconfig. * tag 'sunxi-clk-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: sun5i: Add clk_set_rate_parent to the CPU clock
2017-08-02Merge tag 'meson-clk-fixes-for-4.13-rc4-v2' of ↵Stephen Boyd
git://github.com/baylibre/clk-meson into clk-fixes Pull one Meson clock fix from Neil Armstrong * tag 'meson-clk-fixes-for-4.13-rc4-v2' of git://github.com/baylibre/clk-meson: clk: meson: mpll: fix mpll0 fractional part ignored
2017-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These seven patches are mostly minor build, Kconfig and error leg fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix return code in qedi_ep_connect() scsi: lpfc: fix linking against modular NVMe support scsi: scsi_transport_fc: return -EBUSY for deleted vport scsi: libcxgbi: add check for valid cxgbi_task_data scsi: aic7xxx: fix firmware build with O=path scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
2017-08-02Merge tag 'asoc-fix-v4.13-rc3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.13 Quite a few fixes here that have been sent since the merge window, the biggest one is the fix from Tony for some confusion with the device property API which was causing issues with the of-graph card. This is fixed with some changes in the graph API itself as it seemed very likely to be error prone.
2017-08-02blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failedMing Lei
When blk_mq_get_request() failed, preempt counter isn't released, and blk_mq_make_request() doesn't release the counter too. This patch fixes the issue, and makes sure that preempt counter is only held if rq is allocated successfully. The same policy is applied on .q_usage_counter too. Signed-off-by: Ming Lei <minlei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-02ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridgeGregory CLEMENT
The number of pins in South Bridge is 30 and not 29. There is a fix for the driver for the pinctrl, but a fix is also need at device tree level for the GPIO. Fixes: afda007feda5 ("ARM64: dts: marvell: Add pinctrl nodes for Armada 3700") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02NFSv4: Fix double frees in nfs4_test_session_trunk()Trond Myklebust
rpc_clnt_add_xprt() expects the callback function to be synchronous, and expects to release the transport and switch references itself. Fixes: 04fa2c6bb51b1 ("NFS pnfs data server multipath session trunking") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-02ALSA: hda - Fix speaker output from VAIO VPCL14M1RSergei A. Trusov
Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly. Tested-by: Dmitriy <mexx400@yandex.ru> Cc: <stable@vger.kernel.org> Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-02powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error checkSergei Shtylyov
of_irq_to_resource() has recently been fixed to return negative error #'s along with 0 in case of failure, however the Freescale MPC832x RDB board code still only regards 0 as a failure indication -- fix it up. Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-02gpio: tegra: fix unbalanced chained_irq_enter/exitMichał Mirosław
When more than one GPIO IRQs are triggered simultaneously, tegra_gpio_irq_handler() called chained_irq_exit() multiple times for one chained_irq_enter(). Fixes: 3c92db9ac0ca3eee8e46e2424b6c074e2e394ad9 Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> [Also changed the variable to a bool] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-02mtd: nand: atmel: Fix EDO mode checkBoris Brezillon
EDO mode should be used when tRC is less than 30ns, but timings are expressed in picoseconds in the nand_sdr_timings struct. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Reported-by: Alexander Dahl <ada@thorsis.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflowBoris Brezillon
All timings in nand_sdr_timings are expressed in picoseconds but some of them may not fit in an u32. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 204e7ecd47e2 ("mtd: nand: Add a few more timings to nand_sdr_timings") Reported-by: Alexander Dahl <ada@thorsis.com> Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Dahl <ada@thorsis.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Fix timing setup for NANDs that do not support SET FEATURESBoris Brezillon
Some ONFI NANDs do not support the SET/GET FEATURES commands, which, according to the spec, is perfectly valid. On these NANDs we can't set a specific timing mode using the "timing mode" feature, and we should assume the NAND does not require any setup to enter a specific timing mode. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reported-by: Alexander Dahl <ada@thorsis.com> Cc: <stable@vger.kernel.org> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: Fix a docs build warningJonathan Corbet
Commit 0b4773fd1649 (mtd: nand: Drop unused cached programming support) removed the "cached" parameter from nand_write_page(), but did not update the kerneldoc comments, creating this docs build warning: ./drivers/mtd/nand/nand_base.c:2751: warning: Excess function parameter 'cached' description in 'nand_write_page' Remove the offending line so we can have a little peace and quiet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02mtd: nand: sunxi: fix potential divide-by-zero errorBryan O'Donoghue
clk_round_rate() can return <= 0. Currently the value returned by clk_round_rate() is used directly for a division. This patch introduces a guard to ensure a divide-by-zero or a divide by a negative number for that matter can't happen by bugging out returning -EINVAL if clk_round_rate() returns <= 0. Fixes: 2d43457f79e4 ("mtd: nand: sunxi: fix EDO mode selection") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-02nand: fix wrong default oob layout for small pages using soft eccMiquel Raynal
When using soft ecc, if no ooblayout is given, the core automatically uses one of the nand_ooblayout_{sp,lp}*() functions to determine the layout inside the out of band data. Until kernel version 4.6, struct nand_ecclayout was used for that purpose. During the migration from 4.6 to 4.7, an error shown up in the small page layout, in the case oob section is only 8 bytes long. The layout was using three bytes (0, 1, 2) for ecc, two bytes (3, 4) as free bytes, one byte (5) for bad block marker and finally two bytes (6, 7) as free bytes, as shown there: [linux-4.6] drivers/mtd/nand/nand_base.c:52 static struct nand_ecclayout nand_oob_8 = { .eccbytes = 3, .eccpos = {0, 1, 2}, .oobfree = { {.offset = 3, .length = 2}, {.offset = 6, .length = 2} } }; This fixes the current implementation which is incoherent. It references bit 3 at the same time as an ecc byte and a free byte. Furthermore, it is clear with the previous implementation that there is only one ecc section with 8 bytes oob sections. We shall return -ERANGE in the nand_ooblayout_ecc_sp() function when asked for the second section. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Fixes: 41b207a70d3a ("mtd: nand: implement the default mtd_ooblayout_ops") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-01Merge branch 'net-Fix-64-bit-statistics-seqcount-init'David S. Miller
Florian Fainelli says: ==================== drivers: net: Fix 64-bit statistics seqcount init This patch series fixes a bunch of drivers to have their 64-bit statistics seqcount cookie be initialized correctly. Most of these drivers (except b44, gtp) are probably used on 64-bit only hosts and so the lockdep splat might have never been seen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ipvlan: Fix 64-bit statistics seqcount initializationFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that by using the proper helper function: netdev_alloc_pcpu_stats(). Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01netvsc: Initialize 64-bit stats seqcountFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. In commit 6c80f3fc2398 ("netvsc: report per-channel stats in ethtool statistics") netdev_alloc_pcpu_stats() was removed in favor of open-coding the 64-bits statistics, except that u64_stats_init() was missed. Fixes: 6c80f3fc2398 ("netvsc: report per-channel stats in ethtool statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01gtp: Initialize 64-bit per-cpu stats correctlyFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that by using netdev_alloc_pcpu_stats() instead of an open coded allocation. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01nfp: Initialize RX and TX ring 64-bit stats seqcountsFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ixgbe: Initialize 64-bit stats seqcountsFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4197aa7bb818 ("ixgbevf: provide 64 bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01i40e: Initialize 64-bit statistics TX ring seqcountFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 980e9b118642 ("i40e: Add support for 64 bit netstats") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01b44: Initialize 64-bit stats seqcountFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: eeda8585522b ("b44: add 64 bit stats") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01gue: fix remcsum when GRO on and CHECKSUM_PARTIAL boundary is outer UDPK. Den
In the case that GRO is turned on and the original received packet is CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last csum-unnecessary point, which for instance could occur if the packet comes from another Linux guest on the same Linux host, we have to do either remcsum_adjust or set up CHECKSUM_PARTIAL again with its csum_start properly reset considering RCO. However, since b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") that barrier in such case could be skipped if GRO turned on, hence we pass over it and the inner L4 validation mistakenly reckons it as a bad csum. This patch makes remcsum_offload being reset at the same time of GRO remcsum cleanup, so as to make it work in such case as before. Fixes: b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01vxlan: fix remcsum when GRO on and CHECKSUM_PARTIAL boundary is outer UDPK. Den
In the case that GRO is turned on and the original received packet is CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last csum-unnecessary point, which for instance could occur if the packet comes from another Linux guest on the same Linux host, we have to do either remcsum_adjust or set up CHECKSUM_PARTIAL again with its csum_start properly reset considering RCO. However, since b7fe10e5ebac("gro: Fix remcsum offload to deal with frags in GRO") that barrier in such case could be skipped if GRO turned on, hence we pass over it and the inner L4 validation mistakenly reckons it as a bad csum. This patch makes remcsum_offload being reset at the same time of GRO remcsum cleanup, so as to make it work in such case as before. Fixes: b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01platform/x86: dell-wmi: Fix driver interface version queryAndy Lutomirski
When I converted dell-wmi to the new bus infrastructure, I left the call to dell_wmi_check_descriptor_buffer() in dell_wmi_init(). This could cause two problems: - An error message when loading the driver on a system without dell-wmi. We'd try to read the event descriptor even if the WMI GUID wasn't there. - A possible race if dell-wmi was loaded manually before wmi was fully initialized. Fix it by moving the call to the probe function where it belongs. Fixes: bff589be59c5 ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure") Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-01Cipso: cipso_v4_optptr enter infinite loopyujuan.qi
in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop. Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue Signed-off-by: yujuan.qi <yujuan.qi@mediatek.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge branch 'ethernet-ti-cpts-fix-tx-timestamping-timeout'David S. Miller
Grygorii Strashko says: ==================== net: ethernet: ti: cpts: fix tx timestamping timeout With the low Ethernet connection speed cpdma notification about packet processing can be received before CPTS TX timestamp event, which is set when packet actually left CPSW while cpdma notification is sent when packet pushed in CPSW fifo. As result, when connection is slow and CPU is fast enough TX timestamping is not working properly. Issue was discovered using timestamping tool on am57x boards with Ethernet link speed forced to 100M and on am335x-evm with Ethernet link speed forced to 10M. Patch3 - This series fixes it by introducing TX SKB queue to store PTP SKBs for which Ethernet Transmit Event hasn't been received yet and then re-check this queue with new Ethernet Transmit Events by scheduling CPTS overflow work more often until TX SKB queue is not empty. Patch 1,2 - As CPTS overflow work is time critical task it important to ensure that its scheduling is not delayed. Unfortunately, There could be significant delay in CPTS work schedule under high system load and on -RT which could cause CPTS misbehavior due to internal counter overflow and there is no way to tune CPTS overflow work execution policy and priority manually. The kthread_worker can be used instead of workqueues, as it creates separate named kthread for each worker and its its execution policy and priority can be configured using chrt tool. Instead of modifying CPTS driver itself it was proposed to it was proposed to add PTP auxiliary worker to the PHC subsystem [1], so other drivers can benefit from this feature also. [1] https://www.spinics.net/lists/netdev/msg445392.html changes in v4: - fixed memleak in ptp_clock_register() - undocumented change in cpts_find_ts() moved to separate patch (minor fix) changes in v3: - patch 1: added proper error handling in ptp_clock_register. minor comments applied. changes in v2: - added PTP auxiliary worker to the PHC subsystem Links v3: https://www.spinics.net/lists/netdev/msg446058.html v2: https://www.spinics.net/lists/netdev/msg445859.html v1: https://www.spinics.net/lists/netdev/msg445387.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix fifo read in cpts_find_tsGrygorii Strashko
Now the call chain cpts_find_ts() |- cpts_fifo_read(cpts, CPTS_EV_PUSH) will stop reading CPTS FIFO if PUSH event is found. But this is not expected and CPTS FIFI should be completely drained here. This is most probably copy-paste error and it has no negative impact as CPTS_EV_PUSH should not be present in FIFO without TS_PUSH request and cpts_systim_read() and cpts_find_ts() synchronized by spin_lock. Correct above by calling cpts_fifo_read() with -1 parameter, so it will read all CPTS event from FIFO. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix tx timestamping timeoutGrygorii Strashko
With the low speed Ethernet connection CPDMA notification about packet processing can be received before CPTS TX timestamp event, which is set when packet actually left CPSW while cpdma notification is sent when packet pushed in CPSW fifo. As result, when connection is slow and CPU is fast enough TX timestamping is not working properly. Fix it, by introducing TX SKB queue to store PTP SKBs for which Ethernet Transmit Event hasn't been received yet and then re-check this queue with new Ethernet Transmit Events by scheduling CPTS overflow work more often (every 1 jiffies) until TX SKB queue is not empty. Side effect of this change is: - User space tools require to take into account possible delay in TX timestamp processing (for example ptp4l works with tx_timestamp_timeout=400 under net traffic and tx_timestamp_timeout=25 in idle). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: convert to use ptp auxiliary workerGrygorii Strashko
There could be significant delay in CPTS work schedule under high system load and on -RT which could cause CPTS misbehavior due to internal counter overflow. Usage of own kthread_worker allows to avoid such kind of issues and makes it possible to tune priority of CPTS kthread_worker thread on -RT (thread name "cpts"). Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC subsystem implements such functionality in a generic way now. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ptp: introduce ptp auxiliary workerGrygorii Strashko
Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01NFSv4: Fix EXCHANGE_ID corrupt verifier issueTrond Myklebust
The verifier is allocated on the stack, but the EXCHANGE_ID RPC call was changed to be asynchronous by commit 8d89bd70bc939. If we interrrupt the call to rpc_wait_for_completion_task(), we can therefore end up transmitting random stack contents in lieu of the verifier. Fixes: 8d89bd70bc939 ("NFS setup async exchange_id") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-01KVM: async_pf: make rcu irq exit if not triggered from idle taskWanpeng Li
WARNING: CPU: 5 PID: 1242 at kernel/rcu/tree_plugin.h:323 rcu_note_context_switch+0x207/0x6b0 CPU: 5 PID: 1242 Comm: unity-settings- Not tainted 4.13.0-rc2+ #1 RIP: 0010:rcu_note_context_switch+0x207/0x6b0 Call Trace: __schedule+0xda/0xba0 ? kvm_async_pf_task_wait+0x1b2/0x270 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 RIP: 0010:__d_lookup_rcu+0x90/0x1e0 I encounter this when trying to stress the async page fault in L1 guest w/ L2 guests running. Commit 9b132fbe5419 (Add rcu user eqs exception hooks for async page fault) adds rcu_irq_enter/exit() to kvm_async_pf_task_wait() to exit cpu idle eqs when needed, to protect the code that needs use rcu. However, we need to call the pair even if the function calls schedule(), as seen from the above backtrace. This patch fixes it by informing the RCU subsystem exit/enter the irq towards/away from idle for both n.halted and !n.halted. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-01KVM: nVMX: fixes to nested virt interrupt injectionPaolo Bonzini
There are three issues in nested_vmx_check_exception: 1) it is not taking PFEC_MATCH/PFEC_MASK into account, as reported by Wanpeng Li; 2) it should rebuild the interruption info and exit qualification fields from scratch, as reported by Jim Mattson, because the values from the L2->L0 vmexit may be invalid (e.g. if an emulated instruction causes a page fault, the EPT misconfig's exit qualification is incorrect). 3) CR2 and DR6 should not be written for exception intercept vmexits (CR2 only for AMD). This patch fixes the first two and adds a comment about the last, outlining the fix. Cc: Jim Mattson <jmattson@google.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01KVM: nVMX: do not fill vm_exit_intr_error_code in prepare_vmcs12Paolo Bonzini
Do this in the caller of nested_vmx_vmexit instead. nested_vmx_check_exception was doing a vmwrite to the vmcs02's VM_EXIT_INTR_ERROR_CODE field, so that prepare_vmcs12 would move the field to vmcs12->vm_exit_intr_error_code. However that isn't possible on pre-Haswell machines. Moving the vmcs12 write to the callers fixes it. Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Changed nested_vmx_reflect_vmexit() return type to (int)1 from (bool)1, thanks to fengguang.wu@intel.com] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-01Merge branch 'parisc-4.13-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: - Our cache flushing code ran into a BUG in case context is not current. Fix it by flushing the whole cache in such rare situations (by Dave Anglin). - Fix a "sleeping function called from invalid context BUG" in our pdc_stable driver by rearranging our locks (by James Bottomley) - The thread and irq stacks require more than 16 KB since kernel 4.11. Increase both to 32 KB. - Define CONFIG_CPU_BIG_ENDIAN unconditionally on parisc to avoid wrong behaviour in qrwlock functions (by Babu Moger). * 'parisc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Define CONFIG_CPU_BIG_ENDIAN parisc: pdc_stable: Fix locking when creating sysfs links parisc: Increase thread and stack size to 32kb parisc: Handle vma's whose context is not current in flush_cache_range
2017-08-01xtensa: mm/cache: add missing EXPORT_SYMBOLsMax Filippov
Functions clear_user_highpage, copy_user_highpage, flush_dcache_page, local_flush_cache_range and local_flush_cache_page may be used from modules. Export them. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-08-01xtensa: don't limit csum_partial export by CONFIG_NETMax Filippov
csum_partial and csum_partial_copy_generic are defined unconditionally and are available even when CONFIG_NET is disabled. They are used not only by the network drivers, but also by scsi and media. Don't limit these functions export by CONFIG_NET. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-08-01libceph: make RECOVERY_DELETES feature create a new intervalIlya Dryomov
This is needed so that the OSDs can regenerate the missing set at the start of a new interval where support for recovery deletes changed. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: upmap semantic changesIlya Dryomov
- apply both pg_upmap and pg_upmap_items - allow bidirectional swap of pg-upmap-items Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01crush: assume weight_set != null imples weight_set_size > 0Ilya Dryomov
Reflects ceph.git commit 5e8fa3e06b68fae1582c9230a3a8d1abc6146286. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: fallback for when there isn't a pool-specific choose_argIlya Dryomov
There is now a fallback to a choose_arg index of -1 if there isn't a pool-specific choose_arg set. If you create a per-pool weight-set, that works for that pool. Otherwise we try the compat/default one. If that doesn't exist either, then we use the normal CRUSH weights. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 14:26:20 +0000