| Age | Commit message (Collapse) | Author |
|---|
|
This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.
Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.
Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.
Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
|
|
drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.
Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.
So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
|
|
Table needs to be specified for selective rule dumps per chain.
Fixes: 241faeceb849c ("netfilter: nf_tables: Speed up selective rule dumps")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is no code that decreases the reference count of stateful objects
in error path of the nft_add_set_elem(). this causes a leak of reference
count of stateful objects.
Test commands:
$nft add table ip filter
$nft add counter ip filter c1
$nft add map ip filter m1 { type ipv4_addr : counter \;}
$nft add element ip filter m1 { 1 : c1 }
$nft add element ip filter m1 { 1 : c1 }
$nft delete element ip filter m1 { 1 }
$nft delete counter ip filter c1
Result:
Error: Could not process rule: Device or resource busy
delete counter ip filter c1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
At the second 'nft add element ip filter m1 { 1 : c1 }', the reference
count of the 'c1' is increased then it tries to insert into the 'm1'. but
the 'm1' already has same element so it returns -EEXIST.
But it doesn't decrease the reference count of the 'c1' in the error path.
Due to a leak of the reference count of the 'c1', the 'c1' can't be
removed by 'nft delete counter ip filter c1'.
Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
__nf_tables_dump_rules() stores the current idx value into cb->args[0]
before returning to caller. With multiple chains present, cb->args[0] is
therefore updated after each chain's rules have been traversed. This
though causes the final nf_tables_dump_rules() run (which should return
an skb->len of zero since no rules are left to dump) to continue dumping
rules for each but the first chain. Fix this by moving the cb->args[0]
update to nf_tables_dump_rules().
With no final action to be performed anymore in
__nf_tables_dump_rules(), drop 'out_unfinished' jump label and 'rc'
variable - instead return the appropriate value directly.
Fixes: 241faeceb849c ("netfilter: nf_tables: Speed up selective rule dumps")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
from Andrey.
2) Follow-up fix to the speculation fix where we need to reject a
corner case for sanitation when ptr and scalars are mixed in the
same alu op. Also, some unrelated minor doc fixes, from Daniel.
3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
by not assuming fd of zero value to be the result of an error
case, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a VLAN is deleted from a bridge port we should not change the PVID
unless the deleted VLAN is the PVID.
Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.
When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.
Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.
For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding / deleting VLANs to / from a bridge port, the bridge driver
first tries to propagate the information via switchdev and falls back to
the 8021q driver in case the underlying driver does not support
switchdev. This can result in a memory leak [1] when VXLAN and mlxsw
ports are enslaved to the bridge:
$ ip link set dev vxlan0 master br0
# No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev
# notification and the bridge driver adds the VLAN on 'vxlan0' via the
# 8021q driver
$ bridge vlan add vid 10 dev vxlan0 pvid untagged
# mlxsw port is enslaved to the bridge
$ ip link set dev swp1 master br0
# mlxsw processes the switchdev notification and the 8021q driver is
# skipped
$ bridge vlan del vid 10 dev vxlan0
This results in 'struct vlan_info' and 'struct vlan_vid_info' being
leaked, as they were allocated by the 8021q driver during VLAN addition,
but never freed as the 8021q driver was skipped during deletion.
Fix this by introducing a new VLAN private flag that indicates whether
the VLAN was added on the port by switchdev or the 8021q driver. If the
VLAN was added by the 8021q driver, then we make sure to delete it via
the 8021q driver as well.
[1]
unreferenced object 0xffff88822d20b1e8 (size 256):
comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s)
hex dump (first 32 bytes):
e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<00000000e0178b02>] vlan_vid_add+0x661/0x920
[<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<000000003535392c>] br_vlan_info+0x132/0x410
[<00000000aedaa9dc>] br_afspec+0x75c/0x870
[<00000000f5716133>] br_setlink+0x3dc/0x6d0
[<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
unreferenced object 0xffff888227454308 (size 32):
comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s)
hex dump (first 32 bytes):
88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -....
81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330
[<0000000018050631>] vlan_vid_add+0x3e6/0x920
[<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00
[<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90
[<000000003535392c>] br_vlan_info+0x132/0x410
[<00000000aedaa9dc>] br_afspec+0x75c/0x870
[<00000000f5716133>] br_setlink+0x3dc/0x6d0
[<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30
[<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80
[<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0
[<000000008be8d614>] rtnetlink_rcv+0x21/0x30
[<000000009ab2ca25>] netlink_unicast+0x52f/0x740
[<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50
[<000000005d1e2050>] sock_sendmsg+0xbe/0x120
[<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0
[<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test case for the issue fixed by previous commit. In case the
offloading of an unsupported VxLAN tunnel was triggered by adding the
mapped VLAN to a local port, then error should be returned to the user.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which
is already a member in the VLAN. In case the configuration of the VXLAN
is not supported, the driver would return -EOPNOTSUPP.
This is problematic since bridge code does not interpret this as error,
but rather that it should try to setup the VLAN using the 8021q driver
instead of switchdev.
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drivers are not supposed to return errors in switchdev commit phase if
they returned OK in prepare phase. Otherwise, a WARNING is emitted.
However, when the offloading of a VXLAN tunnel is triggered by the
addition of a VLAN on a local port, it is not possible to guarantee that
the commit phase will succeed without doing a lot of work.
In these cases, the artificial division between prepare and commit phase
does not make sense, so simply do the work in the prepare phase.
Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in:
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined
reference to `vxlan_fdb_find_uc'
Add Kconfig dependency to enforce usable configurations.
Fixes: 1231e04f5bba ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave()
is called and prevent from possible EMAD error.
Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removal of the mlxsw driver on Spectrum-2 platforms hits an ASSERT_RTNL()
in Spectrum-2 ACL Bloom filter and in ERP removal paths. This happens
because the multicast router implementation in Spectrum-2 relies on ACLs.
Taking the RTNL lock upon driver removal is useless since the driver first
removes its ports and unregisters from notifiers so concurrent writes
cannot happen at that time. The assertions were originally put as a
reminder for future work involving ERP background optimization, but having
these assertions only during addition serves this purpose as well.
Therefore remove the ASSERT_RTNL() in both places related to ERP and Bloom
filter removal.
Fixes: cf7221a4f5a5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().
Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fix typo after a recent commit causing headphones to have no sound
Fixes: ad43d528a7ac (ALSA: usb-audio: Define registers for CM6206)
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This soft dependency works around an issue where sometimes the genphy
driver is used instead of the dedicated PHY driver. The root cause of
the issue isn't clear yet. People reported the unloading/re-loading
module r8169 helps, and also configuring this soft dependency in
the modprobe config files. Important just seems to be that the
realtek module is loaded before r8169.
Once this has been applied preliminary fix 38af4b903210 ("net: phy:
add workaround for issue where PHY driver doesn't bind to the device")
will be removed.
Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When creating frame buffer, userspace may request to attach to a
previously allocated GEM object that is smaller than what GPU
requires. Validation must be done to prevent out-of-bound DMA,
otherwise it could be exploited to reveal sensitive data.
This fix is not done in a common code path because individual
driver might have different requirement.
Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Userspace may request pitch alignment that is not supported by GPU.
Some requests 32, but GPU ignores it and uses default 64 when cpp is
4. If GEM object is allocated based on the smaller alignment, GPU
DMA will go out of bound.
Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since soft min setting is enough. Hard min setting is redundant.
Reported-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make sure the clock level enforced is within the allowed
ranges.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since pp_od_clk_voltage device file is for OD related sysfs operations.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It has been noticed that some phys do not have the registers
required by the previous implementation.
To fix this, instead of using phy_read, the required information
is extracted from the phy_device structure.
fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For those ASICs with no overdrive capabilities, the OD support flag
will be reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ioctl command is read/write (or just read, if the fact that user space
writes n_samples field is ignored).
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise it is impossible to use it for something else, as it will break
userspace that puts garbage there.
The same check should be done in other structures, but the fact that
data in reserved fields is ignored is already part of the kernel ABI.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With blob sharing in place, TOMOYO is no longer an exclusive LSM, so it
can operate separately now. Mark it as such.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Move management of the kern_ipc_perm->security and
msg_msg->security blobs out of the individual security
modules and into the security infrastructure. Instead
of allocating the blobs from within the modules the modules
tell the infrastructure how much space is required, and
the space is allocated there.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the ipc->security pointer directly.
Don't use the msg_msg->security pointer directly.
Provide helper functions that provides the security blob pointers.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the ipc->security pointer directly.
Don't use the msg_msg->security pointer directly.
Provide helper functions that provides the security blob pointers.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Move management of the task_struct->security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
The only user of this blob is AppArmor. The AppArmor use
is abstracted to avoid future conflict.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Move management of the inode->i_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the inode->i_security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the inode->i_security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Move management of the file->f_security blob out of the
individual security modules and into the infrastructure.
The modules no longer allocate or free the data, instead
they tell the infrastructure how much space they require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the file->f_security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the file->f_security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Move management of the cred security blob out of the
security modules and into the security infrastructre.
Instead of allocating and freeing space the security
modules tell the infrastructure how much space they
require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the cred->security pointer directly.
Provide helper functions that provide the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
There are no longer users of selinux_is_enabled().
Remove it. As selinux_is_enabled() is the only reason
for include/linux/selinux.h remove that as well.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The SELinux specific credential poisioning only makes sense
if SELinux is managing the credentials. As the intent of this
patch set is to move the blob management out of the modules
and into the infrastructure, the SELinux specific code has
to go. The poisioning could be introduced into the infrastructure
at some later date.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Back in 2007 I made what turned out to be a rather serious
mistake in the implementation of the Smack security module.
The SELinux module used an interface in /proc to manipulate
the security context on processes. Rather than use a similar
interface, I used the same interface. The AppArmor team did
likewise. Now /proc/.../attr/current will tell you the
security "context" of the process, but it will be different
depending on the security module you're using.
This patch provides a subdirectory in /proc/.../attr for
Smack. Smack user space can use the "current" file in
this subdirectory and never have to worry about getting
SELinux attributes by mistake. Programs that use the
old interface will continue to work (or fail, as the case
may be) as before.
The proposed S.A.R.A security module is dependent on
the mechanism to create its own attr subdirectory.
The original implementation is by Kees Cook.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This converts capabilities to use the new LSM_ORDER_FIRST position.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
In preparation for distinguishing the "capability" LSM from other LSMs, it
must be ordered first. This introduces LSM_ORDER_MUTABLE for the general
LSMs and LSM_ORDER_FIRST for capability. In the future LSM_ORDER_LAST
for could be added for anything that must run last (e.g. Landlock may
use this).
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This converts Yama from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
