| Age | Commit message (Collapse) | Author |
|---|
|
This converts LoadPin from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
Since we already have to do a pass through the LSMs to figure out if
exclusive LSMs should be disabled after the first one is seen as enabled,
this splits the logic up a bit more cleanly. Now we do a full "prepare"
pass through the LSMs (which also allows for later use by the blob-sharing
code), before starting the LSM initialization pass.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This removes CONFIG_DEFAULT_SECURITY in favor of the explicit ordering
offered by CONFIG_LSM and adds all the exclusive LSMs to the ordered
LSM initialization. The old meaning of CONFIG_DEFAULT_SECURITY is now
captured by which exclusive LSM is listed first in the LSM order. All
LSMs not added to the ordered list are explicitly disabled.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
In preparation for removing CONFIG_DEFAULT_SECURITY, this removes the
soon-to-be redundant SECURITY_SELINUX_BOOTPARAM_VALUE. Since explicit
ordering via CONFIG_LSM or "lsm=" will define whether an LSM is enabled or
not, this CONFIG will become effectively ignored, so remove it. However,
in order to stay backward-compatible with "security=selinux", the enable
variable defaults to true.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for removing CONFIG_DEFAULT_SECURITY, this removes the
soon-to-be redundant SECURITY_APPARMOR_BOOTPARAM_VALUE. Since explicit
ordering via CONFIG_LSM or "lsm=" will define whether an LSM is enabled or
not, this CONFIG will become effectively ignored, so remove it. However,
in order to stay backward-compatible with "security=apparmor", the enable
variable defaults to true.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to both support old "security=" Legacy Major LSM selection, and
handling real exclusivity, this creates LSM_FLAG_EXCLUSIVE and updates
the selection logic to handle them.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
For what are marked as the Legacy Major LSMs, make them effectively
exclusive when selected on the "security=" boot parameter, to handle
the future case of when a previously major LSMs become non-exclusive
(e.g. when TOMOYO starts blob-sharing).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
This moves the string handling for "security=" boot parameter into
a stored pointer instead of a string duplicate. This will allow
easier handling of the string when switching logic to use the coming
enable/disable infrastructure.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
Until now, any LSM without an enable storage variable was considered
enabled. This inverts the logic and sets defaults to true only if the
LSM gets added to the ordered initialization list. (And an exception
continues for the major LSMs until they are integrated into the ordered
initialization in a later patch.)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Provide a way to explicitly choose LSM initialization order via the new
"lsm=" comma-separated list of LSMs.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This provides a way to declare LSM initialization order via the new
CONFIG_LSM. Currently only non-major LSMs are recognized. This will
be expanded in future patches.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This constructs an ordered list of LSMs to initialize, using a hard-coded
list of only "integrity": minor LSMs continue to have direct hook calls,
and major LSMs continue to initialize separately.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
As a prerequisite to adjusting LSM selection logic in the future, this
moves the selection logic up out of the individual major LSMs, making
their init functions only run when actually enabled. This considers all
LSMs enabled by default unless they specified an external "enable"
variable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
In preparation for lifting the "is this LSM enabled?" logic out of the
individual LSMs, pass in any special enabled state tracking (as needed
for SELinux, AppArmor, and LoadPin). This should be an "int" to include
handling any future cases where "enabled" is exposed via sysctl which
has no "bool" type.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
This provides a place for ordered LSMs to be initialized, separate from
the "major" LSMs. This is mainly a copy/paste from major_lsm_init() to
ordered_lsm_init(), but it will change drastically in later patches.
What is not obvious in the patch is that this change moves the integrity
LSM from major_lsm_init() into ordered_lsm_init(), since it is not marked
with the LSM_FLAG_LEGACY_MAJOR. As it is the only LSM in the "ordered"
list, there is no reordering yet created.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
This adds a flag for the current "major" LSMs to distinguish them when
we have a universal method for ordering all LSMs. It's called "legacy"
since the distinction of "major" will go away in the blob-sharing world.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
After receiving data into the page cache, we need to call flush_dcache_page()
for the architectures that define it.
Fixes: 277e4ab7d530b ("SUNRPC: Simplify TCP receive code by switching...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.
Technically, we could record the start_time anytime during fork(2). But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space. For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).
By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.
Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned. Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded. This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.
Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To get the changes in:
4b86713236e4 ("vhost: split structs into a separate header file")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Those didn't touch things used in tools, i.e. the following continues
working:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
static const char *vhost_virtio_ioctl_cmds[] = {
[0x00] = "SET_FEATURES",
[0x01] = "SET_OWNER",
[0x02] = "RESET_OWNER",
[0x03] = "SET_MEM_TABLE",
[0x04] = "SET_LOG_BASE",
[0x07] = "SET_LOG_FD",
[0x10] = "SET_VRING_NUM",
[0x11] = "SET_VRING_ADDR",
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
[0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
[0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
[0x25] = "SET_BACKEND_FEATURES",
[0x30] = "NET_SET_BACKEND",
[0x40] = "SCSI_SET_ENDPOINT",
[0x41] = "SCSI_CLEAR_ENDPOINT",
[0x42] = "SCSI_GET_ABI_VERSION",
[0x43] = "SCSI_SET_EVENTS_MISSED",
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
[0x26] = "GET_BACKEND_FEATURES",
};
$
At some point in the eBPFication of perf, using something like:
# perf trace -e ioctl(cmd=VHOST_VRING*)
Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint,
i.e. filtering at the origin.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")
That made the mount flags string table generator to switch to using
mount.h instead.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh
needs just got moved to mount.h, use that instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We were using a copy of uapi/linux/fs.h to create the mount syscall
'flags' string table to use in 'perf trace', to convert from the number
obtained via the raw_syscalls:sys_enter into a string, using
tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6bde ("vfs:
Suppress MS_* flag defs within the kernel unless explicitly enabled")
those defines got moved to linux/mount.h, so grab a copy of mount.h too.
Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.
Fixes: ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This should return -ENOMEM if __alloc_workqueue_key() fails, but it
returns success.
Fixes: 6d2d0ee27c7a ("xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The below referenced commit adds a test for integer overflow, but in
doing so prevents the unmap ioctl from ever including the last page of
the address space. Subtract one to compare to the last address of the
unmap to avoid the overflow and wrap-around.
Fixes: 71a7d3d78e3c ("vfio/type1: silence integer overflow warning")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291
Cc: stable@vger.kernel.org # v4.15+
Reported-by: Pei Zhang <pezhang@redhat.com>
Debugged-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This restriction is not present in 'perf report' and since 'perf top'
uses the same hists browser, remove it from it as well.
With this we create per event buckets with callchain trees, so that
# perf top --sort dso -g --no-children
Bucketizes samples by DSO and below it shows the callchains leading to
functions in this DSO.
Try also:
# perf top -e sched:*switch -g --no-children
To see the callchains leading to sched switches, pressing 'E' to expand
all one can quickly see the most common scheduler switches and what
leads to them, for instance, calls to IO, futexes, etc.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/20190107140854.GA28965@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to make libtraceevent into a proper library, its API
should be straightforward.
After discussion with Steven Rostedt, we decided to remove the
tep_data_event_from_type() API and to replace it with tep_find_event(),
as it does the same.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.913841066@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to make libtraceevent into a proper library, its API
should be straightforward.
After a discussion with Steven Rostedt, we decided to rename a few APIs,
to have more intuitive names.
This patch renames tep_is_file_bigendian() to tep_file_bigendian().
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.767549746@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to make libtraceevent into a proper library, its API
should be straightforward.
The tep_register_event_handler() functions returns -1 in case it
successfully registers the new event handler. Such return code is used
by the other library APIs in case of an error.
To unify the return logic of tep_register_event_handler() with the other
APIs, this patch introduces enum tep_reg_handler, which is used by this
function as return value, to handle all possible successful return
cases.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.628034497@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
trace_seq_vprintf() APIs
In order to make libtraceevent into a proper library, its API should be
straightforward.
The trace_seq_printf() and trace_seq_vprintf() APIs have inconsistent
returned values with the other trace_seq_* APIs.
This path changes the return logic of trace_seq_printf() and
trace_seq_vprintf() to return the number of printed characters, as the
other trace_seq_* related APIs.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.485792891@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to make libtraceevent a proper library, variables, data
structures and functions should have a unique prefix to prevent name
space conflicts. That prefix will be "tep_".
This patch renames 'struct cmdline' to 'struct tep_cmdline'.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.358871851@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch initializes the host_bigendian member of the tep_handle
structure with the byte order of the current host, when this handler is
created - in tep_alloc() API. We need this in order to remove the
tep_set_host_bigendian() API.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.216292134@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds a new API of tracevent library: tep_override_comm() It
registers a pid / command mapping. If a mapping with the same pid
already exists, the entry is updated with the new command.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181130154648.038915912@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some
independance with respect to the ARM CPU being used. Add a test which
tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is
turned on to help asses the system's health.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation for checking that the vectors page on the ARM
architecture, refactor the find_vdso_map() function to accept finding an
arbitrary string and create a dedicated helper function for that under
util/find-map.c and update the filename to find-map.c and all references
to it: perf-read-vdso.c and util/vdso.c.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20181221034337.26663-2-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We were not taking into account the "... [continued]" printed
characters, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qt20y0acmf8k0bzisce8kw95@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we get the sys_enter for a syscall we check if the last one is
still waiting for its matching sys_exit, if so we print this:
468.753 ( ): firefox/32382 poll(ufds: 0x7f3988d3dd00, nfds: 7, timeout_msecs: 4294967295) ...
449.575 ( 0.004 ms): Softwar~cThrea/32434 futex(uaddr: 0x7f39a18a9b70, op: WAKE|PRIVATE_FLAG, val: 1) = 0
At some point we'll get that poll sys_exit event and will print a "[continued]" line.
While making the sizing of the alignment after the syscall arg list and
its result configurable, so that we can mimic strace, which uses a
smaller alingment by default, a bug was introduced where the closing
parens appeared before the syscall name and its arg list, fix it.
Fixes: 4b8a240ed5e0 ("perf trace: Add alignment spaces after the closing parens")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oi45i54s59h1w1kmgpzrfuum@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The handle_irq_perbit function loop every bit in hwirq local variable.
handle_irq_perbit(hwirq) {
for_everyt_bit_in(hwirq) {
handle_domain_irq()
->irq_exit()
->invoke_softirq()
->__do_softirq()
->local_irq_enable() // Here will cause new interrupt.
}
}
When new interrupt coming at local_irq_enable, it will finish another
interrupt handler and pull down the interrupt source. But hwirq is the
local variable for handle_irq_perbit(), it can't get new interrupt
controller pending reg status. So we need update hwirq with pending reg
in every loop.
Also change write_relax to writel could prevent stw from fast retire.
When local_irq is enabled, intc regs is really set-in.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Lu Baoquan <lu.baoquan@intellif.com>
|
|
Commit: 4cf58924951e remove the address argument of pte_alloc without
modify csky related code. linux-5.0-rc1 compile failed with csky.
Remove the unnecessary address testing in pte_alloc().
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree
building.
CC drivers/vfio/pci/vfio_pci_nvlink2.o
In file included from drivers/vfio/pci/trace.h:102,
from drivers/vfio/pci/vfio_pci_nvlink2.c:29:
./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
^
compilation terminated.
make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1
To fix the build error, let's tell include/trace/define_trace.h the
location of drivers/vfio/pci/trace.h
Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The ltq_r32() and ltq_w32() macros use the __raw_readl() and
__raw_writel() functions which do not swap the value to little endian.
On the big endian vrx200 SoC the UART is operated in big endian IO mode,
the readl() and write() functions convert the value to little endian
first and then the driver does not work any more on this SoC.
Currently the vrx200 SoC selects the CONFIG_SWAP_IO_SPACE option,
without this option the serial driver would work, but PCI devices do not
work any more.
This patch makes the driver use the __raw_readl() and __raw_writel()
functions which do not swap the endianness. On big endian system it is
assumed that the device should be access in big endian IO mode and on a
little endian system it would be access in little endian mode.
Fixes: 89b8bd2082bb ("serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This website hasn't worked for quite some time.
Signed-off-by: David Brown <david.brown@linaro.org>
Cc: Matt Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For I/O access, 810/807 store instruction fast retire will cause wrong
primitive. For example:
stw (clear interrupt source)
stw (unmask interrupt controller)
enable interrupt
stw is fast retire instruction. When PC is run at enable interrupt
stage, the clear interrupt source hasn't finished. It will cause another
wrong irq-enter.
So use mb() to prevent above.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Lu Baoquan <lu.baoquan@intellif.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf annotate:
Ivan Krylov:
- Pass filename to objdump via execl, fixing usage with filenames
with special characters.
perf report:
Jin Yao:
Fix wrong iteration count in --branch-history
perf stat:
Jin Yao:
- Fix endless wait for child process
perf test:
Arnaldo Carvalho de Melo:
- Use a fallback to get the pathname in vfs_getname in
tools build:
Jiri Olsa:
- Allow overriding CFLAGS assignments.
Misc:
Arnaldo Carvalho de Melo:
- Syncronize UAPI headers
Mattias Jacobsson:
- Remove redundant va_end() in strbuf_addv()
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Building the driver when GPIOLIB=n is not selected is causing the following
compilation failure:
drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset':
drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(mp->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe':
drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~~
devm_gpio_free
drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~
GPIOF_INIT_LOW
Add the missing linux/gpio/consumer.h header to fix it.
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
We are getting rid of the "raw" BUS_ATTR() macro, so fix up the
documentation to not refer to it anymore.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_zalloc_coherent() is no longer needed as it has no users because
dma_alloc_coherent() already zeroes out memory for us.
The Coccinelle grammar rule that used to check for dma_alloc_coherent()
+ memset() is modified so that it just tells the user that the memset is
not needed anymore.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The last few stragglers coccinelle doesn't pick up are on driver
specific header files. Phase those out as well as dma_alloc_coherent()
zeroes out the memory as well now too.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
810 doesn't support jsri instruction and csky-as will leave
jsri + nop for relocation. Module-probe need replace them with
lrw + jsr.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Hui Kai <huikai@acoinfo.com>
|
