summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-30percpu: fix this_cpu_sub() subtrahend casting for unsignedsGreg Thelen
this_cpu_sub() is implemented as negation and addition. This patch casts the adjustment to the counter type before negation to sign extend the adjustment. This helps in cases where the counter type is wider than an unsigned adjustment. An alternative to this patch is to declare such operations unsupported, but it seemed useful to avoid surprises. This patch specifically helps the following example: unsigned int delta = 1 preempt_disable() this_cpu_write(long_counter, 0) this_cpu_sub(long_counter, delta) preempt_enable() Before this change long_counter on a 64 bit machine ends with value 0xffffffff, rather than 0xffffffffffffffff. This is because this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta), which is basically: long_counter = 0 + 0xffffffff Also apply the same cast to: __this_cpu_sub() __this_cpu_sub_return() this_cpu_sub_return() All percpu_test.ko passes, especially the following cases which previously failed: l -= ui_one; __this_cpu_sub(long_counter, ui_one); CHECK(l, long_counter, -1); l -= ui_one; this_cpu_sub(long_counter, ui_one); CHECK(l, long_counter, -1); CHECK(l, long_counter, 0xffffffffffffffff); ul -= ui_one; __this_cpu_sub(ulong_counter, ui_one); CHECK(ul, ulong_counter, -1); CHECK(ul, ulong_counter, 0xffffffffffffffff); ul = this_cpu_sub_return(ulong_counter, ui_one); CHECK(ul, ulong_counter, 2); ul = __this_cpu_sub_return(ulong_counter, ui_one); CHECK(ul, ulong_counter, 1); Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30mm/pagewalk.c: fix walk_page_range() access of wrong PTEsChen LinX
When walk_page_range walk a memory map's page tables, it'll skip VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it maybe larger than 'end'. In next loop, 'addr' will be larger than 'next'. Then in /proc/XXXX/pagemap file reading procedure, the 'addr' will growing forever in pagemap_pte_range, pte_to_pagemap_entry will access the wrong pte. BUG: Bad page map in process procrank pte:8437526f pmd:785de067 addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping: (null) index:9108d CPU: 1 PID: 4974 Comm: procrank Tainted: G B W O 3.10.1+ #1 Call Trace: dump_stack+0x16/0x18 print_bad_pte+0x114/0x1b0 vm_normal_page+0x56/0x60 pagemap_pte_range+0x17a/0x1d0 walk_page_range+0x19e/0x2c0 pagemap_read+0x16e/0x200 vfs_read+0x84/0x150 SyS_read+0x4a/0x80 syscall_call+0x7/0xb Signed-off-by: Liu ShuoX <shuox.liu@intel.com> Signed-off-by: Chen LinX <linx.z.chen@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [3.10.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30doc:net: Fix typo in Documentation/networkingMasanari Iida
Correct spelling typo in Documentation/networking Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30mm: list_lru: fix almost infinite loop causing effective livelockRussell King
I've seen a fair number of issues with kswapd and other processes appearing to get stuck in v3.12-rc. Using sysrq-p many times seems to indicate that it gets stuck somewhere in list_lru_walk_node(), called from prune_icache_sb() and super_cache_scan(). I never seem to be able to trigger a calltrace for functions above that point. So I decided to add the following to super_cache_scan(): @@ -81,10 +81,14 @@ static unsigned long super_cache_scan(struct shrinker *shrink, inodes = list_lru_count_node(&sb->s_inode_lru, sc->nid); dentries = list_lru_count_node(&sb->s_dentry_lru, sc->nid); total_objects = dentries + inodes + fs_objects + 1; +printk("%s:%u: %s: dentries %lu inodes %lu total %lu\n", current->comm, current->pid, __func__, dentries, inodes, total_objects); /* proportion the scan between the caches */ dentries = mult_frac(sc->nr_to_scan, dentries, total_objects); inodes = mult_frac(sc->nr_to_scan, inodes, total_objects); +printk("%s:%u: %s: dentries %lu inodes %lu\n", current->comm, current->pid, __func__, dentries, inodes); +BUG_ON(dentries == 0); +BUG_ON(inodes == 0); /* * prune the dcache first as the icache is pinned by it, then @@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink, freed += sb->s_op->free_cached_objects(sb, fs_objects, sc->nid); } - +printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed); drop_super(sb); return freed; } and shortly thereafter, having applied some pressure, I got this: update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635 update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0 ------------[ cut here ]------------ Kernel BUG at c0101994 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#3] SMP ARM Modules linked in: fuse rfcomm bnep bluetooth hid_cypress CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G D 3.12.0-rc7+ #154 task: daea1200 ti: c3bf8000 task.ti: c3bf8000 PC is at super_cache_scan+0x1c0/0x278 LR is at trace_hardirqs_on+0x14/0x18 Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240) ... Backtrace: (super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8) (shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0) (try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5) (__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13) (__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914) (handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc) (do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8) (do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0) (do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40) Notice that we had a very low number of inodes, which were reduced to zero my mult_frac(). Now, prune_icache_sb() calls list_lru_walk_node() passing that number of inodes (0) into that as the number of objects to scan: long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan, int nid) { LIST_HEAD(freeable); long freed; freed = list_lru_walk_node(&sb->s_inode_lru, nid, inode_lru_isolate, &freeable, &nr_to_scan); which does: unsigned long list_lru_walk_node(struct list_lru *lru, int nid, list_lru_walk_cb isolate, void *cb_arg, unsigned long *nr_to_walk) { struct list_lru_node *nlru = &lru->node[nid]; struct list_head *item, *n; unsigned long isolated = 0; spin_lock(&nlru->lock); restart: list_for_each_safe(item, n, &nlru->list) { enum lru_status ret; /* * decrement nr_to_walk first so that we don't livelock if we * get stuck on large numbesr of LRU_RETRY items */ if (--(*nr_to_walk) == 0) break; So, if *nr_to_walk was zero when this function was entered, that means we're wanting to operate on (~0UL)+1 objects - which might as well be infinite. Clearly this is not correct behaviour. If we think about the behaviour of this function when *nr_to_walk is 1, then clearly it's wrong - we decrement first and then test for zero - which results in us doing nothing at all. A post-decrement would give the desired behaviour - we'd try to walk one object and one object only if *nr_to_walk were one. It also gives the correct behaviour for zero - we exit at this point. Fixes: 5cedf721a7cd ("list_lru: fix broken LRU_RETRY behaviour") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> [ Modified to make sure we never underflow the count: this function gets called in a loop, so the 0 -> ~0ul transition is dangerous - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Merge tag 'tty-3.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fixes from Greg KH: "Here are 3 tiny fixes that are needed for 3.12-final for some serial drivers. One of them is a revert of a broken patch, and two others are fixes for reported bugs. All of these have been in linux-next for a while, I forgot I had not sent them to you yet, my fault" (Actually, Greg, you _had_ sent two of the three, so this pulls in just one actual new fix) * tag 'tty-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty/serial: at91: fix uart/usart selection for older products
2013-10-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Mainly Intel regression fixes and quirks, along with a simple one liner to fix rendernodes ioctl access (off by default, but testers want to test it)" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: allow DRM_IOCTL_VERSION on render-nodes drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb drm/i915: No LVDS hardware on Intel D410PT and D425KT drm/i915/dp: workaround BIOS eDP bpp clamping issue drm/i915: Add HSW CRT output readout support drm/i915: Add support for pipe_bpp readout
2013-10-30Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few small HD-audio regression fixes, mostly for stable kernels, too" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix silent headphone on Thinkpads with AD1984A codec ALSA: hda - Add missing initial vmaster hook at build_controls callback ALSA: hda - Fix unbalanced runtime PM refcount after S3/S4
2013-10-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Fixes for the 3.12 debugfs problem - removing the duplicate directory name, and using a better the error code" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: use a more sensible error number when debugfs directory creation fails KVM: Fix modprobe failure for kvm_intel/kvm_amd
2013-10-30Staging: sb105x: info leak in mp_get_count()Dan Carpenter
The icount.reserved[] array isn't initialized so it leaks stack information to userspace. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Staging: bcm: info leak in ioctlDan Carpenter
The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel information to user space. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30staging: wlags49_h2: buffer overflow setting station nameDan Carpenter
We need to check the length parameter before doing the memcpy(). I've actually changed it to strlcpy() as well so that it's NUL terminated. You need CAP_NET_ADMIN to trigger these so it's not the end of the world. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30aacraid: missing capable() check in compat ioctlDan Carpenter
In commit d496f94d22d1 ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30staging: ozwpan: prevent overflow in oz_cdev_write()Dan Carpenter
We need to check "count" so we don't overflow the ei->data buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30uml: check length in exitcode_proc_write()Dan Carpenter
We don't cap the size of buffer from the user so we could write past the end of the array here. Only root can write to this file. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Merge tag 'asoc-fix-v3.12-rc7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.12 A few of the Coverity fixes from Takashi, one of which (the wm_hubs one) is particularly noticable.
2013-10-30sysfs: return correct error code on unimplemented mmap()Vladimir Zapolskiy
Both POSIX.1-2008 and Linux Programmer's Manual have a dedicated return error code for a case, when a file doesn't support mmap(), it's ENODEV. This change replaces overloaded EINVAL with ENODEV in a situation described above for sysfs binary files. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30misc: mic: Fixes for randconfig build errors and warnings.Ashutosh Dixit
This patch fixes the build errors and warnings reported at https://lkml.org/lkml/2013/10/29/421. Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30tifm: fix error return code in tifm_7xx1_probe()Wei Yongjun
Fix to return ENODEV in the pci ioremap error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30staging: drm/imx: fix return value check in ipu_add_subdevice_pdata()Wei Yongjun
In case of error, the function platform_device_register_data() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: usbtest: support container id descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. Container ID descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.3 of USB 3.0 spec. This patch adds to support getting Container ID descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Merge remote-tracking branch 'asoc/fix/wm8994' into asoc-linusMark Brown
2013-10-30usb: usbtest: support superspeed device capbility descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. SuperSpeed USB Device Capability descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.2 of USB 3.0 spec. This patch adds to support getting SuperSpeed USB Device Capability descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: usbtest: support usb2 extension descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. USB2.0 Extension descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.1 of USB 3.0 spec. This patch adds to support getting usb2.0 extension descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: chipidea: only get vbus regulator for non-peripheral modePeter Chen
If the user chooses peripheral mode for this controller, the vbus regulator doesn't need to get, since the host will supply the vbus, it can save one vbus pin for other usage. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Frank Li <frank.li@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30USB: ehci-atmel: add usb_clk for transition to CCFBoris BREZILLON
The AT91 PMC (Power Management Controller) provides a USB clock used by the different USB controllers (ehci, ohci and udc). The atmel-ehci driver must configure the usb clock rate to 48Mhz in order to get a fully functionnal USB host controller. This configuration was formely done in mach-at91/clock.c, but will be bypassed when moving to common clk framework. This patch adds support for usb clock retrieval and configuration only if CCF is enabled (CONFIG_COMMON_CLK). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: zram: Fix access of NULL pointerRashika Kheria
This patch fixes the bug in reset_store caused by accessing NULL pointer. The bdev gets its value from bdget_disk() which could fail when memory pressure is severe and hence can return NULL because allocation of inode in bdget could fail. Hence, this patch introduces a check for bdev to prevent reference to a NULL pointer in the later part of the code. It also removes unnecessary check of bdev for fsync_bdev(). Cc: stable <stable@vger.kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30ASoC: wm_hubs: Add missing break in hp_supply_event()Takashi Iwai
Spotted by coverity CID 115170. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-10-30Staging: zram: Fix variable dereferenced before checkRashika Kheria
This patch fixes the following Smatch warning in zram_drv.c- drivers/staging/zram/zram_drv.c:899 destroy_device() warn: variable dereferenced before check 'zram->disk' (see line 896) Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: rtl8187se: space prohibited before semicolon in r8185b_init.cEbru Akagunduz
Fix checkpatch.pl issues with space prohibited before semicolon in r8185b_init.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: rtl8187se: fix space prohibited after that open parenthesis '(' in ↵Ebru Akagunduz
r8185b_init.c Fix checkpatch.pl issues with space prohibited after that open parenthesis '(' in r8185b_init.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: rtl8187se: fix braces {} are not necessary for single statement ↵Ebru Akagunduz
blocks in r8185b_init.c Fix checkpatch.pl issues with braces {} are not necessary for single statement blocks in r8185b_init.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: rtl8187se: fix trailing whitespace in r8185b_init.cEbru Akagunduz
Fix checkpatch.pl issues with trailing whitespace in r8185b_init.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: rtl8187se: fix please, no space before tabs in r8185b_init.cEbru Akagunduz
Fix checkpatch.pl issues with please, no space before tabs in r8185b_init.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30drivers/staging/nvec/Kconfig: remove trailing whitespaceHimangi Saraogi
This patch fixes checkpatch.pl error trailing whitespace. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: dwc2: Fix variable dereferenced before checkRashika Kheria
This patch fixes the following smatch warning in hcd_intr.c- drivers/staging/dwc2/hcd_intr.c:1946 dwc2_hc_n_intr() warn: variable dereferenced before check 'chan' (see line 1936) Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30Staging: xgifb: fix braces {} are not necessary for any arm of this statementEbru Akagunduz
Fix checkpatch.pl issues with braces {} are not necessary for any arm of this statement in vb_setmode.c Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30staging: rtl8192e: remove unneeded semicolonsValentina Manea
This fixes coccinelle errors regarding unneeded semicolons. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30staging: rtl8192e: use true and false for bool variablesValentina Manea
This patch fixes coccinelle errors for bool variables initialized with 1 or 0 instead of true and false. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30SUNRPC: remove duplicated include from clnt.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-30MIPS: malta: Fix GIC interrupt offsetsMarkos Chandras
The GIC interrupt offsets are calculated based on the value of NR_CPUS. However, this is wrong because NR_CPUS may or may not contain the real number of the actual cpus present in the system. We fix that by using the 'nr_cpu_ids' variable which contains the real number of cpus in the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if NR_CPUS was > 8 with the following errors: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5 Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053 807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000 00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4 807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0 ... Call Trace: [<801098c0>] show_stack+0x64/0x7c [<8049c6b0>] dump_stack+0x64/0x84 [<8012efc4>] warn_slowpath_common+0x84/0xb4 [<8012f00c>] warn_slowpath_null+0x18/0x24 [<80173218>] __irq_set_handler+0x15c/0x164 [<80587cf4>] arch_init_ipiirq+0x2c/0x3c [<805880c8>] arch_init_irq+0x3c4/0x4bc [<80588e28>] init_IRQ+0x3c/0x50 [<805847e8>] start_kernel+0x230/0x3d8 ---[ end trace 4eaa2a86a8e2da26 ]--- This is now fixed and the Malta board can boot with any NR_CPUS value which also helps supporting more processors in a single kernel binary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"Mika Westerberg
Commit 2dc4128 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) changed the enable_slot() to check return value of pci_scan_slot() and if it is zero return early from the function. It means that there were no new devices in this particular slot. However, if a device appeared deeper in the hierarchy the code now ignores it causing things like Thunderbolt chaining fail to recognize new devices. The problem with Alex Williamson's machine was solved with commit a47d8c8 (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks) and hence we should be able to restore the original functionality that we always rescan on bus check notification. On a device check notification we still check what acpiphp_rescan_slot() returns and on zero bail out early. Fixes: 2dc41281b1d1 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30Revert "select: use freezable blocking call"Rafael J. Wysocki
This reverts commit 9745cdb36da8 (select: use freezable blocking call) that triggers problems during resume from suspend to RAM on Paul Bolle's 32-bit x86 machines. Paul says: Ever since I tried running (release candidates of) v3.11 on the two working i686s I still have lying around I ran into issues on resuming from suspend. Reverting 9745cdb36da8 (select: use freezable blocking call) resolves those issues. Resuming from suspend on i686 on (release candidates of) v3.11 and later triggers issues like: traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000] and traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000] Once I hit the systemd error I can only get out of the mess that the system is at that point by power cycling it. Since we are reverting another freezer-related change causing similar problems to happen, this one should be reverted as well. References: https://lkml.org/lkml/2013/10/29/583 Reported-by: Paul Bolle <pebolle@tiscali.nl> Fixes: 9745cdb36da8 (select: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
2013-10-30Revert "epoll: use freezable blocking call"Rafael J. Wysocki
This reverts commit 1c441e921201 (epoll: use freezable blocking call) which is reported to cause user space memory corruption to happen after suspend to RAM. Since it appears to be extremely difficult to root cause this problem, it is best to revert the offending commit and try to address the original issue in a better way later. References: https://bugzilla.kernel.org/show_bug.cgi?id=61781 Reported-by: Natrio <natrio@list.ru> Reported-by: Jeff Pohlmeyer <yetanothergeek@gmail.com> Bisected-by: Leo Wolf <jclw@ymail.com> Fixes: 1c441e921201 (epoll: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
2013-10-30ALSA: hda - Add a fixup for ASUS N76VZTakashi Iwai
ASUS N76VZ needs the same fixup as N56VZ for supporting the boost speaker. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=846529 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-30KVM: use a more sensible error number when debugfs directory creation failsPaolo Bonzini
I don't know if this was due to cut and paste, or somebody was really using a D20 to pick the error code for kvm_init_debugfs as suggested by Linus (EFAULT is 14, so the possibility cannot be entirely ruled out). In any case, this patch fixes it. Reported-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30KVM: Fix modprobe failure for kvm_intel/kvm_amdTim Gardner
The x86 specific kvm init creates a new conflicting debugfs directory which causes modprobe issues with kvm_intel and kvm_amd. For example, sudo modprobe kvm_amd modprobe: ERROR: could not insert 'kvm_amd': Bad address The simplest fix is to just rename the directory. The following KVM config options are set: CONFIG_KVM_GUEST=y CONFIG_KVM_DEBUG_FS=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_KVM_DEVICE_ASSIGNMENT=y Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Change debugfs directory name. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-30drm: allow DRM_IOCTL_VERSION on render-nodesDavid Herrmann
DRM_IOCTL_VERSION is a reliable way to get the driver-name and version information. It's not related to the interface-version (SET_VERSION ioctl) so we can safely enable it on render-nodes. Note that gbm uses udev-BUSID to load the correct mesa driver. However, the VERSION ioctl should be the more reliable way to do this (in case we add new DRM-bus drivers which have no BUSID or similar). Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-29bgmac: don't update slot on skb alloc/dma mapping errorNathan Hintz
Don't update the slot in "bgmac_dma_rx_skb_for_slot" unless both the skb alloc and dma mapping are successful; and free the newly allocated skb if a dma mapping error occurs. This relieves the caller of the need to deduce/execute the appropriate cleanup action required when an error occurs. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ibm emac: Fix locking for enable/disable eob irqAlistair Popple
Calls to mal_enable_eob_irq perform a read-write-modify of a dcr to enable device irqs which is protected by a spin lock. However calls to mal_disable_eob_irq do not take the corresponding lock. This patch resolves the problem by ensuring that calls to mal_disable_eob_irq also take the lock. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ibm emac: Don't call napi_complete if napi_reschedule failedAlistair Popple
This patch fixes a bug which would trigger the BUG_ON() at net/core/dev.c:4156. It was found that this was due to continuing processing in the current poll call even when the call to napi_reschedule failed, indicating the device was already on the polling list. This resulted in an extra call to napi_complete which triggered the BUG_ON(). This patch ensures that we only contine processing rotting packets in the current mal_poll call if we are not already on the polling list. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 02:36:02 +0000