| Age | Commit message (Collapse) | Author |
|---|
|
reg2volt returns the voltage that matches a given register value.
Converting this back the other way with volt2reg didn't return the same
register value because it used truncation instead of rounding.
This meant that values read from sysfs could not be written back to sysfs
to set back the same register value.
With this change, volt2reg will return the same value for every voltage
previously returned by reg2volt (for the set of possible input values)
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz
cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
No alarm is reported by /sys/.../inX_alarm
In detail:
The SMI Voltage status register is the only register giving a status
for voltages, but it does not work like the non-SMI status registers
used for temperatures and fans.
A bit is set for each input crossing a threshold, in both direction,
but the "inside" or "outside" limits info is not available.
Also this register is cleared on read.
Note : this is not explicitly spelled out in the datasheet, but from
experiment.
As a result if an input is crossing a threshold (min or max in any
direction), the alarm is reported only once even if the input is
still outside limits. Also if the alarm for another input is read
before the one of this input, no alarm is reported at all.
Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/5de0f566.tBga5POKAgHlmd0p%gilles.buloz@kontron.com
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
in0 thresholds are written to the in2 thresholds registers
in2 thresholds to in3 thresholds
in3 thresholds to in4 thresholds
in4 thresholds to in0 thresholds
Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
calls
The snprintf calls filling cht_rt5645_cpu_dai_name /
cht_rt5645_codec_aif_name always fill them with the same string
("ssp0-port" resp "rt5645-aif2") so instead of keeping these buffers
around and making cpus->dai_name / codecs->dai_name point to this,
simply update the *->dai_name pointers to directly point to a string
constant containing the desired string.
Signed-off-by: Damian van Soelen <dj.vsoelen@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-5-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name
always fill them with the same string ("rt56*-aif2" resp. ssp0-port").
So instead of keeping these buffers around and making codecs->dai_name /
cpus->dai_name point to them, simply update the *->dai_name pointers to
directly point to a string constant containing the desired string.
Signed-off-by: Jordy Ubink <jordyubink@hotmail.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-4-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name
always fill them with the same string ("rt56*-aif2" resp. ssp0-port").
So instead of keeping these buffers around and making codecs->dai_name /
cpus->dai_name point to them, simply update the *->dai_name pointers to
directly point to a string constant containing the desired string.
Signed-off-by: Nariman Etemadi <narimantos@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-3-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 16 and 24 bit paths in byt_rt5640_codec_fixup are mostly identical,
introduce a local bits variable to address the only difference and move
the common bits out of the if ... else ... .
Signed-off-by: Erik Bussing <eabbussing@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-2-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PM8916 has three TX inputs that each have an (optional) internal
RBIAS resistor. MIC BIAS Internal1/2 (for TX1/2) are already supported.
TX3 does not have its own MIC BIAS supply, instead it is also supplied
from MIC_BIAS1.
Now that we have simplified the MIC BIAS Internal* implementation
we can easily add support for it:
Add a MIC BIAS Internal3 supply that enables the internal RBIAS
resistor on TX3, and make sure to also enable the MIC_BIAS1 supply.
Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114181229.42302-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference
the same register, and have a part of their initialization sequence
duplicated.
For example, the sequence for enabling MIC BIAS Internal1 is:
I1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
I2. Enable internal RBIAS (TX1_INT_RBIAS_EN bit in CDC_A_MICB_1_INT_RBIAS)
The sequence for enabling MIC BIAS External1 is:
E1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
(E2. Ideally, make sure internal RBIAS is disabled. However, this should
not happen in practice because DAPM will disable unused supplies...)
Right now we have:
SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0, ...) // I1
SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, ...) // E1
and I2 is done in the PM event handler (pm8916_wcd_analog_enable_micbias_int1).
We can simplify this by defining a common DAPM supply for I1/E1 ("MIC_BIAS1"),
and one DAPM supply for I2 ("MIC BIAS Internal1"). Additional DAPM routes
ensure that we also enable the MIC_BIAS1 supply for the internal and external
pull up resistor.
Another advantage of this is that we now disable the internal RBIAS
when it is not needed. This makes it much easier to add support for
MIC BIAS Internal3 as a next step.
Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114181229.42302-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC: Fixes for v5.5
This is mostly driver specific fixes, plus an error handling fix
in the core. There is a rather large diffstat for the stm32 SAI
driver, this is a very large but mostly mechanical update which
wraps every register access in the driver to allow a fix to the
locking which avoids circular locks, the active change is much
smaller and more reasonably sized.
|
|
Modify NPCM perphiral SPI reset support from
direct register access to reset controller support.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20200115162301.235926-5-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Improving spi 8 bit per word mode transfer performance
by using 16 bit per word transfer and receive when the data
length is even and larger than one.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20200115162301.235926-3-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
drivers/spi/spi-ti-qspi.c: In function ‘ti_qspi_start_transfer_one’:
drivers/spi/spi-ti-qspi.c:392:8: warning: ‘rx_wlen’ may be used uninitialized in this function [-Wmaybe-uninitialized]
392 | if (rx_wlen >= 32)
| ^
drivers/spi/spi-ti-qspi.c:318:12: note: ‘rx_wlen’ was declared here
318 | u8 rxlen, rx_wlen;
| ^~~~~~~
The warning is a false positive; it is not thrown by all compiler versions, e.g.
Red Hat Cross 9.2.1-1 but not Linaro GCC 7.5-2019.12.
Signed-off-by: Jean Pihet <jean.pihet@newoldbits.com>
Link: https://lore.kernel.org/r/20200115100700.3357-1-jean.pihet@newoldbits.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixing NPCM BMC Peripheral SPI controller 16 bit
send and receive support by writing and reading
the SPI data in the right order.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20200115162301.235926-2-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Intel Comet Lake PCH-V which has the same LPSS than on
Intel Kaby lake unlike other Intel Comet Lake PCH variants that are based
on Intel Cannon Lake PCH LPSS.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20200116091035.575175-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix defines for MPQ7920_MASK_BUCK_ILIM and MPQ7920_DISCHARGE_ON
Remove unused MPQ7920_REG_REGULATOR_EN1.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200115002953.14731-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200116023344.163592-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
`cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock
when you have a voltage controlled regulator (vctrl).
The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the
regulator_get_voltage() and regulator_set_voltage() and that will try to lock
again the dependent regulators (the regulator supplying the control voltage).
Fix the issue by exporting the unlocked version of the regulator_get_voltage()
and regulator_set_voltage() API so drivers that need it, like the voltage
controlled regulator driver can use it.
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I2S SP instance has separate BCLK and LRCLK for Tx and Rx.
Creating additional DAI for Rx.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1579261510-12580-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes: d1ede0641b05 ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200117024149.75515-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes: 320b8b0d13b8 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200115143034.94492-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes: 7d2a5f9ae41e ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200115143027.94364-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200116021142.149000-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The QFN package is a new one.
There is a different initial setting to the chip of QFN and WLCSP package.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Should the write to MADERA_OUTPUT_ENABLES_1 fail and out_clamp[0] not be
set an additional error message will be printed. Clear the ret variable
to avoid this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With fourth pin added for iDisp for skl_dai, update SOF_SKL_DAI_NUM to
account for the change. Without this, dais from the bottom of the list
are skipped. In current state that's the case for 'Alt Analog CPU DAI'.
Fixes: ac42b142cd76 ("ASoC: SOF: Intel: hda: Add iDisp4 DAI")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113114054.9716-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correctly link both channels on the DAC if an output muxed between a
stereo and mono output. Without this one channel of the DAC may be
erroneously powered down whilst in mono mode.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The recently added API that exposes firmware mixer controls to the
kernel is missing cache handling and all writes bypass the cache, this
obviously causes the cache to get out of sync with the hardware. Factor
out the cache handling into two new helper functions and call those from
both the normal ALSA control handlers and the new kernel API.
Fixes: eb65ccdb0836 ("ASoC: wm_adsp: Expose mixer control API")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).
Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable <stable@vger.kernel.org> # 3.5
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).
Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume")
Cc: stable <stable@vger.kernel.org> # 2.6.30
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The low resolution parts of the VDSO, i.e.:
clock_gettime(CLOCK_*_COARSE), clock_getres(), time()
can be used even if there is no VDSO capable clocksource.
But if an architecture opts out of the VDSO data update then this
information becomes stale. This affects ARM when there is no architected
timer available. The lack of update causes userspace to use stale data
forever.
Make the update of the low resolution parts unconditional and only skip
the update of the high resolution parts if the architecture requests it.
Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.765577901@linutronix.de
|
|
The function name suggests that this is a boolean checking whether the
architecture asks for an update of the VDSO data, but it works the other
way round. To spare further confusion invert the logic.
Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.656652824@linutronix.de
|
|
The counters obj_pool_free, and obj_nr_tofree, and the flag obj_freeing are
read locklessly outside the pool_lock critical sections. If read with plain
accesses, this would result in data races.
This is addressed as follows:
* reads outside critical sections become READ_ONCE()s (pairing with
WRITE_ONCE()s added);
* writes become WRITE_ONCE()s (pairing with READ_ONCE()s added); since
writes happen inside critical sections, only the write and not the read
of RMWs needs to be atomic, thus WRITE_ONCE(var, var +/- X) is
sufficient.
The data races were reported by KCSAN:
BUG: KCSAN: data-race in __free_object / fill_pool
write to 0xffffffff8beb04f8 of 4 bytes by interrupt on cpu 1:
__free_object+0x1ee/0x8e0 lib/debugobjects.c:404
__debug_check_no_obj_freed+0x199/0x330 lib/debugobjects.c:969
debug_check_no_obj_freed+0x3c/0x44 lib/debugobjects.c:994
slab_free_hook mm/slub.c:1422 [inline]
read to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 2:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in __debug_object_init / fill_pool
read to 0xffffffff8beb04f8 of 4 bytes by task 10 on cpu 6:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init_on_stack+0x39/0x50 lib/debugobjects.c:606
init_timer_on_stack_key kernel/time/timer.c:742 [inline]
write to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 3:
alloc_object lib/debugobjects.c:258 [inline]
__debug_object_init+0x717/0x810 lib/debugobjects.c:544
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in free_obj_work / free_object
read to 0xffffffff9140c190 of 4 bytes by task 10 on cpu 6:
free_object+0x4b/0xd0 lib/debugobjects.c:426
debug_object_free+0x190/0x210 lib/debugobjects.c:824
destroy_timer_on_stack kernel/time/timer.c:749 [inline]
write to 0xffffffff9140c190 of 4 bytes by task 93 on cpu 1:
free_obj_work+0x24f/0x480 lib/debugobjects.c:313
process_one_work+0x454/0x8d0 kernel/workqueue.c:2264
worker_thread+0x9a/0x780 kernel/workqueue.c:2410
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200116185529.11026-1-elver@google.com
|
|
The fstest btrfs/154 reports
[ 8675.381709] BTRFS: Transaction aborted (error -28)
[ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
[ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286
[ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001
[ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971
[ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000
[ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4
[ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000
[ 8675.413994] FS: 00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000
[ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0
[ 8675.419801] Call Trace:
[ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
[ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
[ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs]
[ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs]
[ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0
[ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs]
[ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs]
[ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0
[ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400
[ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0
[ 8675.436618] ? _raw_spin_unlock+0x1f/0x30
[ 8675.438093] ? __handle_mm_fault+0x499/0x740
[ 8675.439619] ? do_vfs_ioctl+0x56e/0x770
[ 8675.441034] do_vfs_ioctl+0x56e/0x770
[ 8675.442411] ksys_ioctl+0x3a/0x70
[ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 8675.445333] __x64_sys_ioctl+0x16/0x20
[ 8675.446705] do_syscall_64+0x50/0x210
[ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes: 06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the kernel is configured with CONFIG_NR_CPUS smaller than the
number of CPU nodes in the device tree(DT), all the CPU nodes parsing
done to fetch topology information will fail. This is not reasonable
as it is legal to have all the physical CPUs in the system in the DT.
Let us just skip such CPU DT nodes that are not used in the kernel
rather than returning an error.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1579225973-32423-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
First batch of fixes intended for v5.5
* Don't send the PPAG command when PPAG is disabled, since it can
cause problems;
* A few fixes for a HW bug;
* A fix for RS offload;
* A fix for 3168 devices where the NVM tables where the wrong tables
were being read.
* Fix a couple of potential memory leaks in TXQ code;
* Disable L0S states in all hardware since our hardware doesn't
officially support them anymore (and older versions of the hardware
had instability in these states);
* Remove lar_disable parameter since it has been causing issues for
some people who erroneously disable it;
* Force the debug monitor HW to stop also when debug is disabled,
since it sometimes stays on and prevents low system power states;
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver
to hierarchical gpiochip without access to real silicon and failed
miserably since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it
for v5.5 and put the proper conversion into v5.6"
* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
|
|
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
|
|
When CONFIG_PROC_FS is disabled, the compiler warns about an unused
variable:
arch/x86/kernel/apic/x2apic_uv_x.c: In function 'uv_setup_proc_files':
arch/x86/kernel/apic/x2apic_uv_x.c:1546:8: error: unused variable 'name' [-Werror=unused-variable]
char *name = hubless ? "hubless" : "hubbed";
Simplify the code so this variable is no longer needed.
Fixes: 8785968bce1c ("x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191212140419.315264-1-arnd@arndb.de
|
|
The kernel stashes the current task struct in sp_el0 so that this can be
acquired consistently/cheaply when required. When we take an exception
from EL0 we have to:
1) stash the original sp_el0 value
2) find the current task
3) update sp_el0 with the current task pointer
Currently steps #1 and #2 occur in one place, and step #3 a while later.
As the value of sp_el0 is immaterial between these points, let's move
them together to make the code clearer and minimize ifdeffery. This
necessitates moving the comment for MDSCR_EL1.SS.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For most of the exception entry code, <foo>_handler() is the first C
function called from the entry assembly in entry-common.c, and external
functions handling the bulk of the logic are called do_<foo>().
For consistency, apply this scheme to el0_svc_handler and
el0_svc_compat_handler, renaming them to do_el0_svc and
do_el0_svc_compat respectively.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Almost all functions in entry-common.c are marked notrace, with
el1_undef and el1_inv being the only exceptions. We appear to have done
this on the assumption that there were no exception registers that we
needed to snapshot, and thus it was safe to run trace code that might
result in further exceptions and clobber those registers.
However, until we inherit the DAIF flags, our irq flag tracing is stale,
and this discrepancy could set off warnings in some configurations. For
example if CONFIG_DEBUG_LOCKDEP is selected and a trace function calls
into any flag-checking locking routines. Given we don't expect to
trigger el1_undef or el1_inv unless something is already wrong, any
irqflag warnigns are liable to mask the information we'd actually care
about.
Let's keep things simple and mark el1_undef and el1_inv as notrace.
Developers can trace do_undefinstr and bad_mode if they really want to
monitor these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These days arm64 kernels are always SMP, and thus smp_dmb is an
overly-long way of writing dmb. Naturally, no-one uses it.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We haven't needed the inherit_daif macro since commit:
ed3768db588291dd ("arm64: entry: convert el1_sync to C")
... which converted all callers to C and the local_daif_inherit
function.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The IORT specification [0] (Section 3, table 4, page 9) defines the
'Number of IDs' as 'The number of IDs in the range minus one'.
However, the IORT ID mapping function iort_id_map() treats the 'Number
of IDs' field as if it were the full IDs mapping count, with the
following check in place to detect out of boundary input IDs:
InputID >= Input base + Number of IDs
This check is flawed in that it considers the 'Number of IDs' field as
the full number of IDs mapping and disregards the 'minus one' from
the IDs count.
The correct check in iort_id_map() should be implemented as:
InputID > Input base + Number of IDs
this implements the specification correctly but unfortunately it breaks
existing firmwares that erroneously set the 'Number of IDs' as the full
IDs mapping count rather than IDs mapping count minus one.
e.g.
PCI hostbridge mapping entry 1:
Input base: 0x1000
ID Count: 0x100
Output base: 0x1000
Output reference: 0xC4 //ITS reference
PCI hostbridge mapping entry 2:
Input base: 0x1100
ID Count: 0x100
Output base: 0x2000
Output reference: 0xD4 //ITS reference
Two mapping entries which the second entry's Input base = the first
entry's Input base + ID count, so for InputID 0x1100 and with the
correct InputID check in place in iort_id_map() the kernel would map
the InputID to ITS 0xC4 not 0xD4 as it would be expected.
Therefore, to keep supporting existing flawed firmwares, introduce a
workaround that instructs the kernel to use the old InputID range check
logic in iort_id_map(), so that we can support both firmwares written
with the flawed 'Number of IDs' logic and the correct one as defined in
the specifications.
[0]: http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
Reported-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Link: https://lore.kernel.org/linux-acpi/20191215203303.29811-1-pankaj.bansal@nxp.com/
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The asm-generic/mman.h definitions are used by a few architectures that
also define arch-specific PROT flags with value 0x10 and 0x20. This
currently applies to sparc and powerpc for 0x10, while arm64 will soon
join with 0x10 and 0x20.
To help future maintainers, document the use of this flag in the
asm-generic header too.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[catalin.marinas@arm.com: reserve 0x20 as well]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
