| Age | Commit message (Collapse) | Author |
|---|
|
To pick the changes from:
d45476d983240937 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE")
Its just a comment fixup.
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.
arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
`panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
`drm_panel_dp_aux_backlight'
make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1
The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]
v2:
* fix and expand commit description (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9d6366e743f3 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.
There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.
Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.
[1] https://android.googlesource.com/device/google/cuttlefish/
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
alx_reinit has a lockdep assertion that the alx->mtx mutex must be held.
alx_reinit is called from two places: alx_reset and alx_change_mtu.
alx_reset does acquire alx->mtx before calling alx_reinit.
alx_change_mtu does not acquire this mutex, nor do its callers or any
path towards alx_change_mtu.
Acquire the mutex in alx_change_mtu.
The issue was introduced when the fine-grained locking was introduced
to the code to replace the RTNL. The same commit also introduced the
lockdep assertion.
Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220310232707.44251-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:
skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575
head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>
Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.
The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000
Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix multiple "code-block::" warnings by adding "none" as the type of
code-block. Mends these warnings:
Documentation/dev-tools/ktap.rst:71: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:120: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:126: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:132: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:139: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:145: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:195: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:208: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Documentation/dev-tools/ktap.rst:238: WARNING: Error in "code-block" directive:
1 argument(s) required, 0 supplied.
Fixes: a32fa6b2e8b4 ("Documentation: dev-tools: Add KTAP specification")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20220131003637.14274-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix the following 'make refcheckdocs' warning:
Warning: Documentation/driver-api/serial/driver.rst references a file
that doesn't exist: Documentation/driver-api/serial/tty.rst
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220304100315.6732-1-wanjiabing@vivo.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It is not obvious from the documentation that using the "port" channel
for the console requires telnetd to be installed (see port_connection()
in arch/um/drivers/port_user.c). Mention this, and the fact that UML
will not boot until a client connects.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20220310124230.3069354-1-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Translate .../admin-guide/mm/damon/reclaim.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/0a436fa78814bb0a7b9c2f3049e544b1e1802560.1646899089.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../admin-guide/mm/damon/usage.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/431f1c2a158c61a6556f58048cb54961ab7a8790.1646899089.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate Documentation/admin-guide/mm/damon/start.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/e6e328be018cbf5f9105adfdad56c951acbb8c8f.1646899089.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../admin-guide/mm/damon/index.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/0251f09dc926972068329b87b0563dd432849497.1646899089.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The Todolist in the html document looks a mess, now give it a nice looking format.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/d410408ec13d6e9cff97da50a13d793a428e05cf.1646899089.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate Documentation/admin-guide/mm/index.rst into Chinese.
Update Documentation/admin-guide/index.rst.
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/2d695dac05efc012b99fbc7525be65a421c7de03.1646899056.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate Documentation/admin-guide/mm/ksm.rst into Chinese.
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/f987a3a2cbffaad64f6e2377a5e393d9afbb099c.1646899056.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate Documentation/vm/ksm.rst into Chinese.
Update Documentation/translations/zh_CN/vm/index.rst.
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/ceb82d6458cd79bc3b7060199db0c3518adc3b8b.1646899056.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- prevent users from enabling the alternatives framework (and thus
errata handling) on XIP kernels, where runtime code patching does not
function correctly.
- properly detect offset overflow for AUIPC-based relocations in
modules. This may manifest as modules calling arbitrary invalid
addresses, depending on the address allocated when a module is
loaded.
* tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix auipc+jalr relocation range checks
riscv: alternative only works on !XIP_KERNEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix STACKTRACE=n build, in particular for skiroot_defconfig"
* tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix STACKTRACE=n build
|
|
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Restore (mostly) the busy polling for MMC_SEND_OP_COND
MMC host:
- meson-gx: Fix DMA usage of meson_mmc_post_req()"
* tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND
mmc: meson: Fix usage of meson_mmc_post_req()
|
|
* irq/qcom-mpm:
: .
: Add support for Qualcomm's MPM wakeup controller, courtesy
: of Shawn Guo.
: .
irqchip: Add Qualcomm MPM controller driver
dt-bindings: interrupt-controller: Add Qualcomm MPM support
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Qualcomm SoCs based on the RPM architecture have a MSM Power Manager (MPM)
in always-on domain. In addition to managing resources during sleep, the
hardware also has an interrupt controller that monitors the interrupts
when the system is asleep, wakes up the APSS when one of these interrupts
occur and replays it to GIC after it becomes operational.
It adds an irqchip driver for this interrupt controller, and here are
some notes about it.
- For given SoC, a fixed number of MPM pins are supported, e.g. 96 pins
on QCM2290. Each of these MPM pins can be either a MPM_GIC pin or
a MPM_GPIO pin. The mapping between MPM_GIC pin and GIC interrupt
is defined by SoC, as well as the mapping between MPM_GPIO pin and
GPIO number. The former mapping is retrieved from device tree, while
the latter is defined in TLMM pinctrl driver.
- The power domain (PD) .power_off hook is used to notify RPM that APSS
is about to power collapse. This requires MPM PD be the parent PD of
CPU cluster.
- When SoC gets awake from sleep mode, the driver will receive an
interrupt from RPM, so that it can replay interrupt for particular
polarity.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220308080534.3384532-3-shawn.guo@linaro.org
|
|
It adds DT binding support for Qualcomm MPM interrupt controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220308080534.3384532-2-shawn.guo@linaro.org
|
|
In testing the "Fix non-access data TLB cache flush faults" change,
I noticed a significant improvement in glibc build and check times.
This led me to investigate the parisc_cache_flush_threshold setting.
It determines when we switch from line flushing to whole cache flushing.
It turned out that the parisc_cache_flush_threshold setting on
mako and mako2 machines (PA8800 and PA8900 processors) was way too
small. Adjusting this setting provided almost a factor two improvement
in the glibc build and check time.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Userspace is up to now limited to 32-bit, so it's sufficient to print
only 32-bit values when showing pointer addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert the inline assembly code to use the automatic EFAULT exception
handler. With that the fixup code can be dropped.
The other change is to allow double-word only when a 64-bit kernel is
used instead of depending on CONFIG_PA20.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The get_current() code uses the mfctl() macro to get the pointer to the
current task struct from %cr30. The problem with the mfctl() macro is,
that it is marked volatile which is basically correct, because mfctl()
is used to get e.g. the current internal timer or interrupt flags as
well.
But specifically the task struct pointer (%cr30) doesn't change over
time when the kernel executes code for a task.
So, by dropping the volatile when retrieving %cr30 the compiler is now
able to get this value only once and optimize the generated code a lot.
A bloat-o-meter comparism shows that this patch saves ~5kB kernel code
on a 32-bit kernel and ~6kB kernel code on a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use the provided space register constants instead of hardcoded values.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Instead of hardcoding the space registers as strings, use the SR_USER
and SR_KERNEL constants to form the space register in the access
functions.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Provide defines for space registers (SR_KERNEL, SR_USER, ...) which
should be used instead of hardcoding the values.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch drops the CONFIG_PARISC_SELF_EXTRACT option.
The palo boot loader is able to decompress a kernel which was compressed
with gzip. That possibility was useful when the Linux kernel
self-extracting feature wasn't implemented yet.
Beside the fact that the self-extracting feature offers much better
compression rates, we do support self-extracting kernels already since
kernel v4.14, so now it's really time to get rid of that old option and
always use the self-extractor.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The stifb driver (for Artist/HCRX graphics on PA-RISC) was missing
the fillrect function.
Tested on a 715/64 PA-RISC machine and in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add minimal vDSO support, which provides the signal trampoline helpers,
but none of the userspace syscall helpers like time wrappers.
The big benefit of this vDSO implementation is, that we now don't need
an executeable stack any longer. PA-RISC is one of the last
architectures where an executeable stack was needed in oder to implement
the signal trampolines by putting assembly instructions on the stack
which then gets executed. Instead the kernel will provide the relevant
code in the vDSO page and only put the pointers to the signal
information on the stack.
By dropping the need for executable stacks we avoid running into issues
with applications which want non executable stacks for security reasons.
Additionally, alternative stacks on memory areas without exec
permissions are supported too.
This code is based on an initial implementation by Randolph Chung from 2006:
https://lore.kernel.org/linux-parisc/4544A34A.6080700@tausq.org/
I did the porting and lifted the code to current code base. Dave fixed
the unwind code so that gdb and glibc are able to backtrace through the
code. An additional patch to gdb will be pushed upstream by Dave.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: Randolph Chung <randolph@tausq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With the latest cache fix for non-access faults and the support for
non-access faults (code 17) in handle_interruption, we can remove
the fast path emulation for fdc, fic, pdc, lpa, probe and probei
instructions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When a page is not present, we get non-access data TLB faults from
the fdc and fic instructions in flush_user_dcache_range_asm and
flush_user_icache_range_asm. When these occur, the cache line is
not invalidated and potentially we get memory corruption. The
problem was hidden by the nullification of the flush instructions.
These faults also affect performance. With pa8800/pa8900 processors,
there will be 32 faults per 4 KB page since the cache line is 128
bytes. There will be more faults with earlier processors.
The problem is fixed by using flush_cache_pages(). It does the flush
using a tmp alias mapping.
The flush_cache_pages() call in flush_cache_range() flushed too
large a range.
V2: Remove unnecessary preempt_disable() and preempt_enable() calls.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
|
|
Merge misc fixes from David Howells:
"A set of patches for watch_queue filter issues noted by Jann. I've
added in a cleanup patch from Christophe Jaillet to convert to using
formal bitmap specifiers for the note allocation bitmap.
Also two filesystem fixes (afs and cachefiles)"
* emailed patches from David Howells <dhowells@redhat.com>:
cachefiles: Fix volume coherency attribute
afs: Fix potential thrashing in afs writeback
watch_queue: Make comment about setting ->defunct more accurate
watch_queue: Fix lack of barrier/sync/lock between post and read
watch_queue: Free the alloc bitmap when the watch_queue is torn down
watch_queue: Fix the alloc bitmap size to reflect notes allocated
watch_queue: Use the bitmap API when applicable
watch_queue: Fix to always request a pow-of-2 pipe ring size
watch_queue: Fix to release page in ->release()
watch_queue, pipe: Free watchqueue state after clearing pipe ring
watch_queue: Fix filter limit check
|
|
A network filesystem may set coherency data on a volume cookie, and if
given, cachefiles will store this in an xattr on the directory in the
cache corresponding to the volume.
The function that sets the xattr just stores the contents of the volume
coherency buffer directly into the xattr, with nothing added; the
checking function, on the other hand, has a cut'n'paste error whereby it
tries to interpret the xattr contents as would be the xattr on an
ordinary file (using the cachefiles_xattr struct). This results in a
failure to match the coherency data because the buffer ends up being
shifted by 18 bytes.
Fix this by defining a structure specifically for the volume xattr and
making both the setting and checking functions use it.
Since the volume coherency doesn't work if used, take the opportunity to
insert a reserved field for future use, set it to 0 and check that it is
0. Log mismatch through the appropriate tracepoint.
Note that this only affects cifs; 9p, afs, ceph and nfs don't use the
volume coherency data at the moment.
Fixes: 32e150037dce ("fscache, cachefiles: Store the volume coherency data")
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In afs_writepages_region(), if the dirty page we find is undergoing
writeback or write to cache, but the sync_mode is WB_SYNC_NONE, we go
round the loop trying the same page again and again with no pausing or
waiting unless and until another thread manages to clear the writeback
and fscache flags.
Fix this with three measures:
(1) Advance start to after the page we found.
(2) Break out of the loop and return if rescheduling is requested.
(3) Arbitrarily give up after a maximum of 5 skips.
Fixes: 31143d5d515e ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/164692725757.2097000.2060513769492301854.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes: 21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
|
|
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
