summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-06udf: Protect all modifications of LVID with s_alloc_mutexJan Kara
udf_open_lvid() and udf_close_lvid() were modifying LVID without s_alloc_mutex. Since they can be called from remount, the modification could race with other filesystem modifications of LVID so protect them by s_alloc_mutex just to be sure. Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Move handling of uniqueID into a helper function and protect it by a ↵Jan Kara
s_alloc_mutex uniqueID handling has been duplicated in three places. Move it into a common helper. Since we modify an LVID buffer with uniqueID update, we take sbi->s_alloc_mutex to protect agaist other modifications of the structure. Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Remove BKL from udf_update_inodeJan Kara
udf_update_inode() does not need BKL since on-disk inode modifications are protected by the buffer lock and reading of values of in-memory inode is safe without any lock. In some cases we can write inconsistent inode state to disk but in that case inode will be marked dirty and overwritten later. Also make unnecessarily global udf_sync_inode() static. Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Convert UDF_SB(sb)->s_flags to use bitopsJan Kara
Use atomic bitops to manipulate with sb flags to make manipulation safe without any locking. Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06fs/udf: Add printf format/argument verificationJoe Perches
Add __attribute__((format... to udf_warning. All arguments matched formats, no other changes necessary. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06fs/udf: Use vzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probeDan Carpenter
"info->cmdset" gets dereferenced in __readid() so it needs to be initialized earlier in the function. This bug was introduced in 18c81b1828f8 "mtd: pxa3xx_nand: remove the flash info in driver structure". Cc: stable@kernel.org [2.6.37+] Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06UBI: use mtd->writebufsize to set minimal I/O unit sizeAnatolij Gustschin
Previously we used mtd->writesize field to set UBI's minimal I/O unit size. This sometimes caused UBIFS recovery issues when mounting an uncleanly unmounted UBIFS partition on NOR flash since mtd->writesize is 1 byte for NOR flash. The MTD CFI driver however often performs writing multiple bytes in one programming operation using the chip's write buffer. We have to use the size of this write buffer as a minimal I/O unit size for UBI on NOR flash to fix the observed UBIFS recovery issues. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: initialize writebufsize in the MTD object of a partitionAnatolij Gustschin
Propagate the writebufsize to the partition's MTD object so that UBI can set correct value for it's minimal I/O size using the writebufsize field of MTD object of the partition. By previous patches we added proper writebufsize field initialization. Next patch can now change UBI to use this field for setting the minimal I/O size. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: onenand: add mtd->writebufsize initializationAnatolij Gustschin
Initialize mtd->writebufsize to be equal to mtd->writesize. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: add mtd->writebufsize initializationAnatolij Gustschin
Initialize mtd->writebufsize to be equal to mtd->writesize. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: cfi: add writebufsize initializationAnatolij Gustschin
Initialize mtd->writebufsize to the value obtained by CFI query command at probe time. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: add writebufsize field to mtd_info structAnatolij Gustschin
This field will be used to indicate the write buffer size of the MTD device. UBI will set it's minimal I/O unit size (min_io_size) to the indicated write buffer size. By this change we intend to fix failed recovery of UBIFS partitions we currently observe on NOR flash when mounting the partition after unclean unmount. Currently the min_io_size is set to mtd->writesize (which is 1 byte for NOR flash). But flash programming is often done from prepared write buffer containing multiple bytes and is performed in one programming operation which could be interrupted by a power cut or a system reset causing corrupted (partially written) areas in a flash sector. Knowing the size of potentially corrupted areas UBIFS scanning and recovery algorithms are able to perform successful recovery. In case of NOR flash minimal I/O size must be equal to the maximal size of the write buffer used by embedded flash programming algorithm. In case of NAND flash mtd->writebufsize should be equivalent to mtd->writesize. The subsequent patches will add mtd->writebufsize initialization where needed. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in useAdrian Hunter
Prevent OneNAND's voltage regulator from going to sleep while OneNAND is in use, by explicitly enabling and disabling the regulator as appropriate. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: add enable / disable methods to onenand_chipAdrian Hunter
Add enable / disable methods called from get_device() / release_device(). These can be used, for example, to allow the driver to prevent the voltage regulator from being put to sleep while OneNAND is in use. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: m25p80: Fix JEDEC ID for AT26DF321Aleksandr Koltsoff
The last byte of the ID should be zero for this chip. Was added in commit d0e8c47c58575b9131e786edb488fd029eba443e . Reported by Tomi Varjo. Signed-off-by: Aleksandr Koltsoff <aleksandr.koltsoff@ebts.fi> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)Ralf Rösch
See commit: c0cbfd0e81d879a950ba6f0df3f75ea30c5ab16e Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This is correct, but not more: With NAND chips providing page sizes > 512 Bytes chip->ecc.bytes are calculated > 6 in txx9ndfmc_nand_scan. According the data sheet there are (only) 6 bytes ECC available. After applying the patch a Hynix 512M*8 with 2KiB page size could be successfully formatted and used with an ubifs file system. Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chipsGuillaume LECERF
These chips report CFI v3.3 [1], so patch them on the fly to the more correct v1.3. Discussed and tested by the OpenWRT people [2]. [1] http://www.samsung.com/global/system/business/semiconductor/product/2007/6/11/NORFlash/32Mbit/K8D3216UBC/ds_K8D3x16UxC_rev17.pdf [2] https://dev.openwrt.org/ticket/866 Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chipsGuillaume LECERF
These chips report CFI v0.0 [1], so extend cfi_fixup_major_minor() to patch all Samsung chips from 0.0 to 1.0. Discussed and tested by the OpenWRT people [2]. [1] http://www.samsung.com/global/system/business/semiconductor/product/2007/6/11/NORFlash/64Mbit/K8D6316UTM/ds_K8D6x16UxM_rev16.pdf [2] https://dev.openwrt.org/ticket/7348 Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: ams-delta: drop omap_read/write, use ioremapJanusz Krzysztofik
There is a common requirement for not using OMAP specific omap_readw() / omap_writew() function calls in drivers/, but replace them with readw() / writew() on ioremap()ped addresses passed from arch/ instead. The patch implements this idea for the Amstrad Delta NAND driver. To be able to use the modified driver, the board file is updated with the platform device I/O resource declaration, which is passed from there. Created and tested against linux-2.6.37-rc5, on top of recent patch 'MTD: NAND: ams-delta: convert to platform driver'. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: m25p80: add debugging trace in sst_writeNicolas Ferre
Add a DEBUG(MTD_DEBUG_LEVEL2, ..) trace at beginning of sst_write() function as it is done in m25p80_write() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: ams-delta: select for built-in by defaultJanusz Krzysztofik
Now that the Amstrad Delta NAND driver is converted to a platform driver, which prevents it from interfering with other unrelated hardware in multiple OMAP1 cpu and machine configurations, it can be automatically configured for being built into the kernel if the Amstrad Delta board is also selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: lighten scary initial bad block messagesAdrian Hunter
Initial bad blocks are normal but the messages look like errors. Make the messages less scary, make the main message an informational message not a warning, make the message displaying registers a debug message and include the address there instead of in the informational message. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: OMAP2/3: add support for command line partitioningAdrian Hunter
Add the ability to parse MTD partition information from the kernel command line. Note that a pointless BUG_ON is removed, as are redundant calls to 'del_mtd_partitions()' and 'del_mtd_device()' because they are also done by 'onenand_release()'. Finally note that 'add_mtd_device()' returns 1 on failure so the error condition was incorrect. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: rearrange ONFI revision checking, add ONFI 2.3Brian Norris
In checking for the ONFI revision, the first conditional (for checking "unsupported" ONFI) seems unnecessary. All ONFI revisions should be backwards-compatible; even if this is not the case on some newer ONFI revision, it should simply fail the second version-checking if-else block (i.e., the bit-fields for 1.0, 2.0, etc. would not be set to 1). Thus, we move our "unsupported" condition after having checked each bit field. Also, it's simple enough to add a condition for ONFI revision 2.3. Note that this does *NOT* mean we handle all new features of ONFI versions above 1.0. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: choose correct chip name (ONFI bug)Brian Norris
We have the order of the conditional wrong for choosing the ONFI chip name vs. the ID table name. Without this fix, we will almost *always* choose a NULL string to print out instead of the correct one. This has already been suggested by Matthieu Castet. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: ams-delta: convert to platform driverJanusz Krzysztofik
In its current form, the driver may interfere with different hardware on different boards if built into the kernel, hence is not suitable for inclusion into a defconfig, inteded to be usable with multiple OMAP1 cpu and machine types. Convert it to a platform driver, that should be free from this issue. Created and tested against linux-2.6.37-rc5 on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush cxt->work_{erase|write} on removal instead. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: OneNAND: Fix multi block erase support at 4KiB pagesizeKyungmin Park
Original 4KiB pagesize chip (SLC) doesn't support Multi block erase at Spec. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06Revert "mtd: nand: add check for out of page read"Artem Bityutskiy
This reverts commit e14feafbe0d5c6d64bb6fe4eba928cb57ac9a4c8. The commit limits the maximum amount of bytes which can be read at one go to the OOB size, which is incorrect, because mtd->read_oob() allows reading multiple pages at a time, see comment near "struct mtd_oob_ops" at include/linux/mtd/mtd.h. So this patch breaks ABI and hence, has to be reverted. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06drm/nvc0: fix init without firmware presentBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-06ext3: Add journal error check into ext3_rename()Namhyung Kim
Check return value of ext3_journal_get_write_access() and ext3_journal_dirty_metadata(). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: Use search_dirblock() in ext3_dx_find_entry()Theodore Ts'o
Use the search_dirblock() in ext3_dx_find_entry(). It makes the code easier to read, and it takes advantage of common code. It also saves 100 bytes or so of text space. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: Avoid uninitialized memory references with a corrupted htree directoryTheodore Ts'o
If the first htree directory is missing '.' or '..' but is otherwise a valid directory, and we do a lookup for '.' or '..', it's possible to dereference an uninitialized memory pointer in ext3_htree_next_block(). Avoid this. We avoid this by moving the special case from ext3_dx_find_entry() to ext3_find_entry(); this also means we can optimize ext3_find_entry() slightly when NFS looks up "..". Thanks to Brad Spengler for pointing a Clang warning that led me to look more closely at this code. The warning was harmless, but it was useful in pointing out code that was too ugly to live. This warning was also reported by Roman Borisov. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: Return error code from generic_check_addressableDarrick J. Wong
ext3_fill_super should return the error code that generic_check_accessible returns when an error condition occurs. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: Add journal error check into ext3_delete_entry()Namhyung Kim
Check return value of ext3_journal_get_write_access() and ext3_journal_dirty_metadata(). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: Add error check in ext3_mkdir()Namhyung Kim
Check return value of ext3_journal_get_write_access, ext3_journal_dirty_metadata and ext3_mark_inode_dirty. Consolidate error path under new label 'out_clear_inode' and adjust bh releasing appropriately. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06fs/ext3/super.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06fs/ext2/super.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: don't update sb journal_devnum when RO devMaciej Żenczykowski
An ext3 filesystem on a read-only device, with an external journal which is at a different device number then recorded in the superblock will fail to honor the read-only setting of the device and trigger a superblock update (write). For example: - ext3 on a software raid which is in read-only mode - external journal on a read-write device which has changed device num - attempt to mount with -o journal_dev=<new_number> - hits BUG_ON(mddev->ro = 1) in md.c Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06[media] radio-aimslab.c: Fix gcc 4.5+ bugMauro Carvalho Chehab
gcc 4.5+ doesn't properly evaluate some inlined expressions. A previous patch were proposed by Andrew Morton using noinline. However, the entire inlined function is bogus, so let's just remove it and be happy. Reported-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-06Merge branch 'next-s3c24xx' into for-nextKukjin Kim
2011-01-06ARM: S3C24XX: Add support UART3 for S3C2443 and S3C2416Abhilash Kesavan
Both S3C2443 and S3C2416 support 4 UART channels, this patch adds support for the missing uart channel. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/video/sh_mobile_lcdcfb.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest Conflicts: arch/sh/kernel/cpu/sh2a/clock-sh7201.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06Merge branch 'fbdev/udlfb'Paul Mundt
2011-01-06video: udlfb: Kill off special printk wrappers, use pr_fmt().Paul Mundt
This kills off all of the dl_xxx() printk wrappers and simply stubs in a pr_fmt() definition to accomplish the same thing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: Kill off some magic constants for EDID sizing.Paul Mundt
The edid length is fixed, so use the standard definition consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: deifdefify (yes, that's a word).Paul Mundt
udlfb selects all of the options it presently ifdef conditionalizes, so none of the statements have any effect outside of aggravating eye strain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06sh: include Migo-R TS driver in Migo-R defconfigMagnus Damm
This patch enables the Migo-R specific touch screen driver in the Migo-R defconfig. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit (git 2.34.1) at 2025-09-30 23:01:10 +0000