summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-04r8169: 8168DP specific MII registers access methods.françois romieu
Adapted from version 8.019.00 of Realtek's r8168 driver and amended per Hayes Wang's correction : - OCPDR_GPHY_REG_SHIFT must be 16, not 12 - the reg should be at bit 16 ~ 22, whence OCPDR_REG_MASK Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: use device dependent methods to access the MII registers.françois romieu
Current mdio_{read/write} needs device specific information to work correctly with newer chipsets. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: identify different registers.françois romieu
Documentation (sort of). The location are the same, the values are the same but it is just accidental. Note that the 810x could cope with a smaller value as it does not support jumbo frames. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: remove the firmware of RTL8111D.françois romieu
The binary file of the firmware is moved to linux-firmware repository. The firmwares are rtl_nic/rtl8168d-1.fw and rtl_nic/rtl8168d-2.fw. The driver goes along if the firmware couldn't be found. However, it is suggested to be done with the suitable firmware. Some wrong PHY parameters are directly corrected in the driver. Simple firmware checking added per Ben Hutchings suggestion. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ben Hutchings <benh@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04sched, autogroup: Fix reference leakMike Galbraith
The cgroup exit mess also uncovered a struct autogroup reference leak. copy_process() was simply freeing vs putting the signal_struct, stranding a reference. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <1293784350.6839.2.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04sched, autogroup: Fix potential access to freed memoryMike Galbraith
Oleg pointed out that the /proc interface kref_get() useage may race with the final put during autogroup_move_group(). A signal->autogroup assignment may be in flight when the /proc interface dereference, leaving them taking a reference to an already dead group. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1292508592.5940.28.camel@maggy.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04crypto: mark crypto workqueues CPU_INTENSIVETejun Heo
kcrypto_wq and pcrypt->wq's are used to run ciphers and may consume considerable amount of CPU cycles. Mark both as CPU_INTENSIVE so that they don't block other work items. As the workqueues are primarily used to burn CPU cycles, concurrency levels shouldn't matter much and are left at 1. A higher value may be beneficial and needs investigation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-04crypto: mv_cesa - dont return PTR_ERR() of wrong pointerRoel Kluin
Fix a PTR_ERR() return of the wrong pointer Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-04crypto: ripemd - Set module author and update email addressAdrian-Ken Rueegsegger
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-04ARM i.MX53: Make MX53 EVK bootableYong Shen
1. Add entries to Kconfig 2. Add machine definition 3. Add Uart platform data, pad setting and base address 4. Adjust GPIO irq number Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04ARM i.MX53: Some bug fix about MX53 MSL codeYong Shen
1. pll_base address should return right value 2. uart parent clk is from pll3 Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04HID: hidraw: add compatibility ioctl() for 32-bit applications.Alan Ott
Added the ioctl function to the compat_ioctl pointer in the file_operations struct. Before this, some ioctls would fail for 32-bit apps on 64-bit systems. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-04writeback: fix global_dirty_limits comment runtime -> real-timeMinchan Kim
Change runtime with real-time Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-04ARM: S5PV310: Tidy init+disable clock usage and s3c24xx_register_clocks cleanupKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using and cleanups the return of s3c24xx_register_clocks() because it includes it. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S5PV210: Tidy init+disable clock usage and s3c24xx_register_clocks cleanupKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using and cleanups the return of s3c24xx_register_clocks() because it includes it. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S5PC100: Tidy register and disable clock usageKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S5P6450: Tidy register and disable clock usageKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S5P6442: Tidy register and disable clock usageKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S5P6440: Tidy register and disable clock usageKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04ARM: S3C64XX: Tidy register and disable clock usageKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-04x86, mm: Initialize initial_page_table before paravirt jumpsRusty Russell
v2.6.36-rc8-54-gb40827f (x86-32, mm: Add an initial page table for core bootstrapping) made x86 boot using initial_page_table and broke lguest. For 2.6.37 we simply cut & paste the initialization code into lguest (da32dac10126 "lguest: populate initial_page_table"), now we fix it properly by doing that initialization before the paravirt jump. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: lguest <lguest@ozlabs.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <201101041720.54535.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04Merge commit 'v2.6.37-rc8' into x86/apicIngo Molnar
Conflicts: arch/x86/include/asm/io_apic.h Merge reason: move to a fresh -rc, resolve the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04sched: Remove redundant CONFIG_CGROUP_SCHED ifdefYong Zhang
CONFIG_[FAIR|RT]_GROUP_SCHED always means CONFIG_CGROUP_SCHED Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1293803938-8157-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04firewire: use split transaction timeout only for split transactionsClemens Ladisch
Instead of starting the split transaction timeout timer when any request is submitted, start it only when the destination's ACK_PENDING has been received. This prevents us from using a timeout that is too short, and, if the controller's AT queue is emptying very slowly, from cancelling a packet that has not yet been sent. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-04firewire: ohci: consolidate context status flagsStefan Richter
"firewire: ohci: restart iso DMA contexts on resume from low power mode" added the flag struct context.active and "firewire: ohci: cache the context run bit" added struct context.running. These flags contain the same information; combine them. Also, normalize whitespace in pci_resume(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-04firewire: ohci: cache the context run bitClemens Ladisch
The DMA context run control bit is entirely controlled by software, so it is safe to cache it. This allows the driver to avoid doing an additional MMIO read when queueing an AT packet. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-04firewire: ohci: flush AT contexts after bus reset - addendumStefan Richter
Add comments - on why bus_reset_tasklet flushes AT queues, - that commit 76f73ca1b291 can possibly be reverted now. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com>
2011-01-04ipmi: explicitly include of_address.h and of_irq.hRob Herring
of_address.h and of_irq.h are implicitly included on powerpc. Adding them fixes builds on non-powerpc platforms. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-04perf timechart: Adjust perf timechart to the new power eventsThomas Renninger
builtin-timechart must only pass -e power:xy events if they are supported by the running kernel, otherwise try to fetch the old power:power{start,end} events. For this I added the tiny helper function: int is_valid_tracepoint(const char *event_string) to parse-events.[hc], which could be more generic as an interface and support hardware/software/... events, not only tracepoints, but someone else could extend that if needed... Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <j-pihet@ti.com> LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04perf: Clean up power events by introducing new, more generic onesThomas Renninger
Add these new power trace events: power:cpu_idle power:cpu_frequency power:machine_suspend The old C-state/idle accounting events: power:power_start power:power_end Have now a replacement (but we are still keeping the old tracepoints for compatibility): power:cpu_idle and power:power_frequency is replaced with: power:cpu_frequency power:machine_suspend is newly introduced. Jean Pihet has a patch integrated into the generic layer (kernel/power/suspend.c) which will make use of it. the type= field got removed from both, it was never used and the type is differed by the event type itself. perf timechart userspace tool gets adjusted in a separate patch. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04perf: Do not export power_frequency, but power_start eventThomas Renninger
power_frequency moved to drivers/cpufreq/cpufreq.c which has to be compiled in, no need to export it. intel_idle can a be module though... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04Merge branch 'perf/test' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2011-01-04Merge commit 'v2.6.37-rc8' into perf/coreIngo Molnar
Merge reason: pick up latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04gameport: use this_cpu_read instead of lookupChristoph Lameter
Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-04x86: udelay: Use this_cpu_read to avoid address calculationChristoph Lameter
The code will use a segment prefix instead of doing the lookup and calculation. Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-03cnic: Do not call bnx2i when bnx2i is calling cnic_unregister_driver()Michael Chan
We should call bnx2i to send the iSCSI netlink message earlier in cnic_unregister_device(). By the time cnic_unregister_driver() is called, bnx2i may have freed data structures used by the upcalls. Update version to 2.2.12. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03cnic: Do not allow iSCSI and FCoE on bnx2x multi-function modeMichael Chan
Because the hardware does not yet support these in this mode. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03sparc: explicitly cast negative phandle checks to s32Andres Salomon
When we switched sparc from using 'int's to 'phandle's (which is a u32), we neglected to do anything with the various checks for -1. For those tests, explicitly cast the phandles to s32. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-04perf test: Add test for counting open syscallsArnaldo Carvalho de Melo
To test the use of the perf_evsel class on something other than the tools from where we refactored code to create it. It calls open() N times and then checks if the event created to monitor it returns N events. [acme@felicio linux]$ perf test 1: vmlinux symtab matches kallsyms: Ok 2: detect open syscall event: Ok [acme@felicio linux]$ It does. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Auto allocate resources needed for some methodsArnaldo Carvalho de Melo
While writing the first user of the routines created from the ad-hoc routines in the existing builtins I noticed that the resulting set of calls was too long, reduce it by doing some best effort allocations. Tools that need to operate on multiple threads and cpus should pre-allocate enough resources by explicitely calling the perf_evsel__alloc_{fd,counters} methods. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Use {cpu,thread}_map to shorten list of parametersArnaldo Carvalho de Melo
Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf tools: Refactor all_tids to hold nr and the mapArnaldo Carvalho de Melo
So that later, we can pass the thread_map instance instead of (thread_num, thread_map) for things like perf_evsel__open and friends, just like was done with cpu_map. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf tools: Refactor cpumap to hold nr and the mapArnaldo Carvalho de Melo
So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map) for things like perf_evsel__open and friends. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Introduce per cpu and per thread open helpersArnaldo Carvalho de Melo
Abstracting away the loops needed to create the various event fd handlers. The users have to pass a confiruged perf->evsel.attr field, which is already usable after perf_evsel__new (constructor) time, using defaults. Comes out of the ad-hoc routines in builtin-stat, that now uses it. Fixed a small silly bug where we were die()ing before killing our children, dysfunctional family this one 8-) Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Steal the counter reading routines from statArnaldo Carvalho de Melo
Making them hopefully generic enough to be used in 'perf test', well see. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04i2c-mv64xxx: send repeated START between messages in xferRodolfo Giometti
As stated into file include/linux/i2c.h we must send a repeated START between messages in the same xfer groupset: * Except when I2C "protocol mangling" is used, all I2C adapters implement * the standard rules for I2C transactions. Each transaction begins with a * START. That is followed by the slave address, and a bit encoding read * versus write. Then follow all the data bytes, possibly including a byte * with SMBus PEC. The transfer terminates with a NAK, or when all those * bytes have been transferred and ACKed. If this is the last message in a * group, it is followed by a STOP. Otherwise it is followed by the next * @i2c_msg transaction segment, beginning with a (repeated) START. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Mauro Barella <mbarella@vds-it.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-04i2c-nomadik: fix regression on adapter nameLinus Walleij
The Nomadik I2C adapter does not provide a name for the struct passed into i2c_add_numbered_adapter() causing a regression on 2.6.37-rc3 due to commit 2236baa75f704851d3cd3310569058151acb1f06 adding sanity checks for adapters. Fix this by providing a name proper. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-04i2c-omap: Set latency requirements only once for several messagesSamu Onkalo
Ordinary I2C read consist of two messages. First a write operation to tell register address and then read operation to get data. CPU wake up latency is set and removed twice in read case. Set latency requirement before the message processing loop and remove the requirement after the loop to remove latency adjustment operations between the messages. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-04i2c-eg20t: add driver for Intel EG20TTomoya MORINAGA
I2C driver for Intel EG20T PCH Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Qi Wang <qi.wang@intel.com> [ben-linux@fluff.org: reworded commit message] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-04i2c-ocores: add some device tree documentationJonas Bonn
This puts some documentation for the device tree configuration at the head of the driver file. Hopefully this can get moved to a common area for this type of documentation at a later date; unfortunately, there isn't really such a place in the kernel tree at this time. Furthermore, the regstep and clock-frequency parameters are really bus parameters and should probably be passed to the driver in a better way. Consider that a TODO. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit (git 2.34.1) at 2025-10-03 14:37:41 +0000