| Age | Commit message (Collapse) | Author |
|---|
|
The source ID register offset for Skylake server is 0xf0, while for
Icelake server is 0xf8. Pass the correct offset to get the source ID.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The i10nm_edac only checks the ECC enabling status for the first
channel of the memory controller. If there aren't memory DIMMs
populated on the first channel, but at least one DIMM populated
on the second channel, it will wrongly report that the ECC for
the memory controller is disabled that fails to load the i10nm_edac
driver. Fix it by checking ECC enabling status per channel.
[Tony: Also report which channel has ECC disabled]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
In traps.c, only __die calls dump_instr.
However, this function has sub-function as __dump_instr.
dump_kernel_instr can replace those functions.
By using aarch64_insn_read, it does not have to change fs to KERNEL_DS.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: jinho lim <jordan.lim@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.
Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.
This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if the user specifies an unsupported mitigation strategy on the
kernel command line, it will be ignored silently. The code will fall back
to the default strategy, possibly leaving the system more vulnerable than
expected.
This may happen due to e.g. a simple typo, or, for a stable kernel release,
because not all mitigation strategies have been backported.
Inform the user by printing a message.
Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Rewrite of the davinci timer resulting to an immutable branch to be
shared with davinci platform specific tree (Bartosz Golaszewski)
- Cleanup and improvements of the tegra timer (Dmitry Osipenko)
- Add new nxp system counter timer (Bai Ping)
- Increase priority for exynos_mct to take over the initialization
of the IP the arch ARM timer depends on (Marek Szyprowski)
- Change macro use _BITUL() by BIT() on arc timer (Masahiro Yamada)
- Implement the delay timer on ixp4xx (Linus Walleij)
- Add the SPDX license identifier on the meson timer (Neil Armstrong)
|
|
The bits set in x86_spec_ctrl_mask are used to calculate the guest's value
of SPEC_CTRL that is written to the MSR before VMENTRY, and control which
mitigations the guest can enable. In the case of SSBD, unless the host has
enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in
the kernel parameters), the SSBD bit is not set in the mask and the guest
can not properly enable the SSBD always on mitigation mode.
This has been confirmed by running the SSBD PoC on a guest using the SSBD
always on mitigation mode (booted with kernel parameter
"spec_store_bypass_disable=on"), and verifying that the guest is vulnerable
unless the host is also using SSBD always on mode. In addition, the guest
OS incorrectly reports the SSB vulnerability as mitigated.
Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports
it, allowing the guest to use SSBD whether or not the host has chosen to
enable the mitigation in any of its modes.
Fixes: be6fcb5478e9 ("x86/bugs: Rework spec_ctrl base and mask logic")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: bp@alien8.de
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.com
|
|
|
|
Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.
On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.
Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.
If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The following sparse warning is emitted:
arch/x86/kernel/crash.c:59:15:
warning: symbol 'crash_zero_bytes' was not declared. Should it be static?
The variable is only used in this compilation unit, but it is also only
used when CONFIG_KEXEC_FILE is enabled. Just making it static would result
in a 'defined but not used' warning for CONFIG_KEXEC_FILE=n.
Make it static and move it into the existing CONFIG_KEXEC_FILE section.
[ tglx: Massaged changelog and moved it into the existing ifdef ]
Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: kexec@lists.infradead.org
Cc: vgoyal@redhat.com
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/117ef0c6.3d30.16b87c9cfbf.Coremail.kernelpatch@126.com
|
|
Move mds_idle_clear_cpu_buffers() after trace_hardirqs_on() to ensure
all store buffer entries are flushed.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jgross@suse.com
Cc: ndesaulniers@google.com
Cc: gregkh@linuxfoundation.org
Link: https://lkml.kernel.org/r/1561260904-29669-2-git-send-email-zhenzhong.duan@oracle.com
|
|
These board files only use gpio_keys not gpio in general. This include is
just surplus, delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-gpio@vger.kernel.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lkml.kernel.org/r/20190626092119.3172-1-linus.walleij@linaro.org
|
|
The decoder is flawed in the following ways:
- The decoder sometimes fails silently, i.e. it announces success but
returns a word that is not a codeword.
- The return value of the decoder is incoherent with respect to how
fixed erasures are counted. If the word to be decoded is a codeword,
then the decoder always returns zero even if some erasures are given.
On the other hand, if the word to be decoded contains errors, then the
number of erasures is always included in the count of corrected
symbols. So the decoder handles erasures without symbol corruption
inconsistently. This inconsistency probably doesn't affect anyone
using the decoder, but it is inconsistent with the documentation.
- The error positions returned in eras_pos include all erasures, but the
corrections are only set in the correction buffer if there actually is
a symbol error. So if there are erasures without symbol corruption,
then the correction buffer will contain errors (unless initialized to
zero before calling the decoder) or some values will be unset (if the
correction buffer is uninitialized).
- When correcting data in-place the decoder does not correct errors in
the parity. On the other hand, when returning the errors in correction
buffers, errors in the parity are included.
The respective fixed are:
- The syndrome of a codeword is always zero, and the syndrome is linear,
.i.e, S(x+e) = S(x) + S(e). So compute the syndrome for the error and
check whether it equals the syndrome of the received word. If it does,
then we have decoded to a valid codeword, otherwise we know that we
have an uncorrectable error. Fortunately, some unrecoverable error
conditions can be detected earlier in the decoding, which saves some
processing power.
- Simply count and return the number of symbols actually corrected.
- Make sure to only return positions where symbols were corrected.
- Also fix errors in parity when correcting in-place. Another option
would be to completely disregard errors in the parity, but then the
interface makes it impossible to write tests that test for silent
failures.
Other changes:
- Only fill the correction buffer and error position buffer if both of
them are provided. Otherwise correct in place. Previously the error
position buffer was always populated with the positions of the
corrected errors, irrespective of whether a correction buffer was
supplied or not. The rationale for this change is that there seems to
be two use cases for the decoder; correct in-place or use the
correction buffers. The caller does not need the positions of the
corrected errors when in-place correction is used. If in-place
correction is not used, then both the correction buffer and error
position buffer need to be populated.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-8-ferdinand.blomqvist@gmail.com
|
|
The decoder returns the number of corrected symbols, not bits.
The caller provided syndrome must be in index form.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-7-ferdinand.blomqvist@gmail.com
|
|
Check if the syndrome provided by the caller is zero, and act
accordingly.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-6-ferdinand.blomqvist@gmail.com
|
|
Nothing useful was done after the finish label when count is negative so
return directly instead of jumping to finish.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-5-ferdinand.blomqvist@gmail.com
|
|
The length of the data load must be at least one. Or in other words,
there must be room for at least 1 data and nroots parity symbols after
shortening the RS code.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-4-ferdinand.blomqvist@gmail.com
|
|
The decoding of shortenend codes is broken. It only works as expected if
there are no erasures.
When decoding with erasures, Lambda (the error and erasure locator
polynomial) is initialized from the given erasure positions. The pad
parameter is not accounted for by the initialisation code, and hence
Lambda is initialized from incorrect erasure positions.
The fix is to adjust the erasure positions by the supplied pad.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-3-ferdinand.blomqvist@gmail.com
|
|
A Reed-Solomon code with minimum distance d can correct any error and
erasure pattern that satisfies 2 * #error + #erasures < d. If the
error correction capacity is exceeded, then correct decoding cannot be
guaranteed. The decoder must, however, return a valid codeword or report
failure.
There are two main tests:
- Check for correct behaviour up to the error correction capacity
- Check for correct behaviour beyond error corrupted capacity
Both tests are simple:
1. Generate random data
2. Encode data with the chosen code
3. Add errors and erasures to data
4. Decode the corrupted word
5. Check for correct behaviour
When testing up to capacity we test for:
- Correct decoding
- Correct return value (i.e. the number of corrected symbols)
- That the returned error positions are correct
There are two kinds of erasures; the erased symbol can be corrupted or
not. When counting the number of corrected symbols, erasures without
symbol corruption should not be counted. Similarly, the returned error
positions should only include positions where a correction is necessary.
We run the up to capacity tests for three different interfaces of
decode_rs:
- Use the correction buffers
- Use the correction buffers with syndromes provided by the caller
- Error correction in place (does not check the error positions)
When testing beyond capacity test for silent failures. A silent failure is
when the decoder returns success but the returned word is not a valid
codeword.
There are a couple of options for the tests:
- Verbosity.
- Whether to test for correct behaviour beyond capacity. Default is to
test beyond capacity.
- Whether to allow erasures without symbol corruption. Defaults to yes.
Note that the tests take a couple of minutes to complete.
Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-2-ferdinand.blomqvist@gmail.com
|
|
clang versions older than 8 do not support -mcmodel=tiny.
Add a check to the vDSO Makefile for arm64 to remove the flag when
these versions of the compiler are detected.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qian Cai <cai@lca.pw>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: catalin.marinas@arm.com
Cc: will.deacon@arm.com
Cc: arnd@arndb.de
Cc: linux@armlinux.org.uk
Cc: ralf@linux-mips.org
Cc: paul.burton@mips.com
Cc: daniel.lezcano@linaro.org
Cc: salyzyn@android.com
Cc: pcc@google.com
Cc: shuah@kernel.org
Cc: 0x7f454c46@gmail.com
Cc: linux@rasmusvillemoes.dk
Cc: huw@codeweavers.com
Cc: sthotton@marvell.com
Cc: andre.przywara@arm.com
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/20190626113632.9295-1-vincenzo.frascino@arm.com
|
|
Provide the following fixes for the __arch_get_hw_counter()
implementation on arm64:
- Fallback on syscall when an unstable counter is detected.
- Introduce isb()s before and after the counter read to avoid
speculation of the counter value and of the seq lock
respectively.
The second isb() is a temporary solution that will be revisited
in 5.3-rc1.
These fixes restore the semantics that __arch_counter_get_cntvct()
had on arm64.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: catalin.marinas@arm.com
Cc: will.deacon@arm.com
Cc: arnd@arndb.de
Cc: linux@armlinux.org.uk
Cc: ralf@linux-mips.org
Cc: paul.burton@mips.com
Cc: daniel.lezcano@linaro.org
Cc: salyzyn@android.com
Cc: pcc@google.com
Cc: shuah@kernel.org
Cc: 0x7f454c46@gmail.com
Cc: linux@rasmusvillemoes.dk
Cc: huw@codeweavers.com
Cc: sthotton@marvell.com
Cc: andre.przywara@arm.com
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190625161804.38713-3-vincenzo.frascino@arm.com
|
|
Provide the following fixes for the __arch_get_hw_counter()
implementation on arm64:
- Fallback on syscall when an unstable counter is detected.
- Introduce isb()s before and after the counter read to avoid
speculation of the counter value and of the seq lock
respectively.
The second isb() is a temporary solution that will be revisited
in 5.3-rc1.
These fixes restore the semantics that __arch_counter_get_cntvct()
had on arm64.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: catalin.marinas@arm.com
Cc: will.deacon@arm.com
Cc: arnd@arndb.de
Cc: linux@armlinux.org.uk
Cc: ralf@linux-mips.org
Cc: paul.burton@mips.com
Cc: daniel.lezcano@linaro.org
Cc: salyzyn@android.com
Cc: pcc@google.com
Cc: shuah@kernel.org
Cc: 0x7f454c46@gmail.com
Cc: linux@rasmusvillemoes.dk
Cc: huw@codeweavers.com
Cc: sthotton@marvell.com
Cc: andre.przywara@arm.com
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190625161804.38713-2-vincenzo.frascino@arm.com
|
|
The x86 vdso implementation on which the generic vdso library is based on
has subtle (unfortunately undocumented) twists:
1) The code assumes that the clocksource mask is U64_MAX which means that
no bits are masked. Which is true for any valid x86 VDSO clocksource.
Stupidly it still did the mask operation for no reason and at the wrong
place right after reading the clocksource.
2) It contains a sanity check to catch the case where slightly
unsynchronized TSC values can be observed which would cause the delta
calculation to make a huge jump. It therefore checks whether the
current TSC value is larger than the value on which the current
conversion is based on. If it's not larger the base value is used to
prevent time jumps.
#1 Is not only stupid for the X86 case because it does the masking for no
reason it is also completely wrong for clocksources with a smaller mask
which can legitimately wrap around during a conversion period. The core
timekeeping code does it correct by applying the mask after the delta
calculation:
(now - base) & mask
#2 is equally broken for clocksources which have smaller masks and can wrap
around during a conversion period because there the now > base check is
just wrong and causes stale time stamps and time going backwards issues.
Unbreak it by:
1) Removing the mask operation from the clocksource read which makes the
fallback detection work for all clocksources
2) Replacing the conditional delta calculation with a overrideable inline
function.
#2 could reuse clocksource_delta() from the timekeeping code but that
results in a significant performance hit for the x86 VSDO. The timekeeping
core code must have the non optimized version as it has to operate
correctly with clocksources which have smaller masks as well to handle the
case where TSC is discarded as timekeeper clocksource and replaced by HPET
or pmtimer. For the VDSO there is no replacement clocksource. If TSC is
unusable the syscall is enforced which does the right thing.
To accommodate to the needs of various architectures provide an
override-able inline function which defaults to the regular delta
calculation with masking:
(now - base) & mask
Override it for x86 with the non-masking and checking version.
This unbreaks the ARM64 syscall fallback operation, allows to use
clocksources with arbitrary width and preserves the performance
optimization for x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@armlinux.org.uk
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: paul.burton@mips.com
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: salyzyn@android.com
Cc: pcc@google.com
Cc: shuah@kernel.org
Cc: 0x7f454c46@gmail.com
Cc: linux@rasmusvillemoes.dk
Cc: huw@codeweavers.com
Cc: sthotton@marvell.com
Cc: andre.przywara@arm.com
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906261159230.32342@nanos.tec.linutronix.de
|
|
Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.
So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.
The device can be found on HP ZBook 17 G5.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The HID++ spec also defines very long HID++ reports, with a reportid of
0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending
messages to display on their buildin LCD.
Userspace (libmx5000) supports this, in order for this to work when talking
to the HID devices instantiated for the keyboard by hid-logitech-dj,
we need to properly forward these reports to the device.
This commit fixes logi_dj_ll_raw_request not forwarding these reports.
Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add support for Huion HS64 drawing tablet to hid-uclogic
Signed-off-by: Kyle Godbey <me@kyle.ee>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.
USB ID of this device is 0x04f2:0x0939.
We've introduced quirks like this for other models before, so lets add
this mouse too.
Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linux
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Linux 5.2-rc6
|
|
The zero-length transfer results in timeout error because
the transfer doesn't start.
This commit modified to return success in this case.
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Timeout error was silently ignored.
This commit adds timeout error handling and modifies return type of
wait_for_completion_timeout().
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have to print the filename first before we can kfree it.
Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
commit b9f2e25c599bb ("ASoC: soc-core: use soc_find_component() at
snd_soc_find_dai()") used soc_find_component() at snd_soc_find_dai(),
but, some CPU driver has CPU component for DAI and Platform component,
for example generic DMAEngine component.
In such case, CPU component and Platform component have same
of_node / name.
Here soc_find_component() returns *1st* found component.
Thus, we shouldn't use soc_find_component() at snd_soc_find_dai().
This patch fixup this it, and add comment to indicate this limitation.
Fixes: commit b9f2e25c599bb ("ASoC: soc-core: use soc_find_component() at snd_soc_find_dai()")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When SSI9 is sharing pin with SSI0, we need to care about it,
but is missing. This patch fixup it.
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Chaoliang Qin <chaoliang.qin.jg@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Sound can use pin sharing and multi-SSI for
SSI0/1/2/3/4/9.
Because complex HW settings and spaghetti code,
the settings for SSI9 pin sharing with SSI0 doesn't work.
This patch tidyup settings for it.
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Chaoliang Qin <chaoliang.qin.jg@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The madera driver was merged too late to catch Thomas Gleixner's cleanup
of the SPDX headers tree wide. Update the headers to match what was done
in that patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since change_bit() requires unsigned long*, making this cast on an
unsigned int variable will change a wrong bit on BE platforms, causing
memory corruption. Replace this function with a simple XOR.
Fixes: 90f6e6803139 ("ASoC: codecs: ad193x: Fix frame polarity for DSP_A format")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After r363059 and r363928 in LLVM, a build using ld.lld as the linker
with CONFIG_RANDOMIZE_BASE enabled fails like so:
ld.lld: error: relocation R_AARCH64_ABS32 cannot be used against symbol
__efistub_stext_offset; recompile with -fPIC
Fangrui and Peter figured out that ld.lld is incorrectly considering
__efistub_stext_offset as a relative symbol because of the order in
which symbols are evaluated. _text is treated as an absolute symbol
and stext is a relative symbol, making __efistub_stext_offset a
relative symbol.
Adding ABSOLUTE will force ld.lld to evalute this expression in the
right context and does not change ld.bfd's behavior. ld.lld will
need to be fixed but the developers do not see a quick or simple fix
without some research (see the linked issue for further explanation).
Add this simple workaround so that ld.lld can continue to link kernels.
Link: https://github.com/ClangBuiltLinux/linux/issues/561
Link: https://github.com/llvm/llvm-project/commit/025a815d75d2356f2944136269aa5874721ec236
Link: https://github.com/llvm/llvm-project/commit/249fde85832c33f8b06c6b4ac65d1c4b96d23b83
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Debugged-by: Fangrui Song <maskray@google.com>
Debugged-by: Peter Smith <peter.smith@linaro.org>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[will: add comment]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When KASLR and KASAN are both enabled, we keep the modules where they
are, and randomize the placement of the kernel so it is within 2 GB
of the module region. The reason for this is that putting modules in
the vmalloc region (like we normally do when KASLR is enabled) is not
possible in this case, given that the entire vmalloc region is already
backed by KASAN zero shadow pages, and so allocating dedicated KASAN
shadow space as required by loaded modules is not possible.
The default module allocation window is set to [_etext - 128MB, _etext]
in kaslr.c, which is appropriate for KASLR kernels booted without a
seed or with 'nokaslr' on the command line. However, as it turns out,
it is not quite correct for the KASAN case, since it still intersects
the vmalloc region at the top, where attempts to allocate shadow pages
will collide with the KASAN zero shadow pages, causing a WARN() and all
kinds of other trouble. So cap the top end to MODULES_END explicitly
when running with KASAN.
Cc: <stable@vger.kernel.org> # 4.9+
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This was added part of the original commit which added MMU definitions.
commit 4f04d8f00545 ("arm64: MMU definitions").
These symbols never got used as confirmed from a git log search.
git log -p arch/arm64/ | grep PTE_TYPE_FAULT
git log -p arch/arm64/ | grep PMD_TYPE_FAULT
These probably meant to identify non present entries which can now be
achieved with PMD_SECT_VALID or PTE_VALID bits. Hence just drop these
unused symbols which are not required anymore.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into fbdev-for-next
topic/remove-fbcon-notifiers:
- Export fbcon_update_vcs to fix sh_mobile_lcdcfb.c compilation.
- Rely on fbcon being builtin when vgaswitcheroo is builtin.
|
|
For code consistency, use has_target() instead of !setpolicy everywhere,
as it is already done at several places. Maybe we should also use
"!has_target()" instead of "cpufreq_driver->setpolicy" where we need to
check if the driver supports setpolicy, so to use only one expression
for this kind of differentiation.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Upon failure to enable clocks while trying to enable the PWM, make sure
to unlock the mutex that was taken to avoid a deadlock during subsequent
operations.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Modifying the prescaler or polarity value must be done with the
write protection disabled. Currently this is working by chance as
the write protection is in a disabled state by default.
This patch makes sure that we enable/disable the write protection
when needed.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The Flextimer has only one period for several channels. The PWM
subsystem doesn't allow to model something like that. The current
implementation simply disallows changing the period once it has
been set, having as a side effect that you need to enable and
disable the PWM if you want to change the period.
The driver should allow as much freedom as possible for configuring
the period and duty cycle. Therefore, this patch reworks the code
to allow the following:
- period and duty_cycle can be set at will when the PWM is disabled;
- when enabling a PWM, verify that the period is either not set yet,
or the same as the other already enabled PWM(s), and fail if not;
- allow to change the period on the fly when the PWM is the only one
enabled.
It also allows to have different periods configured for different PWMs.
Only one period can be used at a time, thus the first PWM to be enabled
will set that period, only other PWMs with that same period can be
enabled at the same time. To use another PWM with another period, the
enabled PWMs must be disabled first.
Example scenario :
echo 5000000 > pwm0/period #OK
echo 1000000 > pwm0/duty_cycle #OK
echo 1000000 > pwm1/period #OK
echo 1000000 > pwm1/duty_cycle #OK
echo 1 > pwm0/enable #OK
echo 1 > pwm1/enable #FAIL (pwm0/period != pwm1/period)
echo 0 > pwm0/enable #OK
echo 1 > pwm1/enable #OK
echo 1000000 > pwm0/period #OK
echo 2000000 > pwm0/period #OK
echo 1 > pwm0/enable #FAIL (pwm0/period != pwm1/period)
echo 2000000 > pwm1/period #OK (pwm1 still running, changed on the fly)
echo 1 > pwm0/enable #OK (now pwm0/period == pwm1/period)
echo 3000000 > pwm1/period #FAIL (other PWMs running)
echo 0 > pwm0/enable #OK
echo 3000000 > pwm1/period #OK (only this PWM running)
Adapting the code to satisfy these constraints turned up a number of
additional issues with the current implementation:
- the prescaler value 0 was not used (when it could have been);
- when setting the period was not possible, the internal state was
inconsistent;
- the maximal value for configuring the period was never used;
Since all of these interact with each other, rather than trying to fix
each individual issue, this patch reworks how the period and duty cycle
are set entirely, with the following additional improvements:
- implement the new apply() method instead of the individual methods;
- return the exact used period/duty_cycle values;
- more coherent argument types for period, duty_cycle;
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add compatible string for SAM9X60 HLCDC's PWM.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
If sending IR with carrier of 455kHz using the pwm-ir-tx driver, the
carrier ends up being 476kHz. The clock is set to bcm2835-pwm with a
rate of 10MHz.
A carrier of 455kHz has a period of 2198ns, but the arithmetic truncates
this to 2100ns rather than 2200ns. So, use DIV_ROUND_CLOSEST() to reduce
rounding errors, and we have a much more accurate carrier of 454.5kHz.
Reported-by: Andreas Christ <andreas@christ-faesch.ch>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
DT specific handling is replaced by firmware-node abstration to support
ACPI specification of PWM LEDS.
Example ASL:
Device (PWML)
{
Name (_HID, "PRP0001")
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () { Package () {"compatible",
Package () {"pwm-leds"}}}})
Device (PWL0)
{
Name (_HID, "PRP0001")
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"label", "alarm-led"},
Package () {"pwms", Package ()
{\_SB_.PCI0.PWM, 0, 600000, 0}},
Package () {"linux,default-state", "off"}}})
}
}
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In analogy to referencing a GPIO using the "gpios" property from ACPI,
support referencing a PWM using the "pwms" property.
ACPI entries must look like
Package () {"pwms", Package ()
{ <PWM device reference>, <PWM index>, <PWM period> [, <PWM flags>]}}
In contrast to the DT implementation, only _one_ PWM entry in the "pwms"
property is supported. As a consequence "pwm-names"-property and
con_id lookup aren't supported.
Support for ACPI is added via the firmware-node framework which is an
abstraction layer on top of ACPI/DT. To keep this patch clean, DT and
ACPI paths are kept separate. The firmware-node framework could be used
to unify both paths in a future patch.
To support leds-pwm driver, an additional method devm_fwnode_pwm_get()
which supports both ACPI and DT configuration is exported.
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
[thierry.reding@gmail.com: fix build failures for !ACPI]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
According to the Documentation/pwm.txt, all PWM consumers should
implement power management instead of the PWM driver. So, this
patch removes suspend/resume support.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
