summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15dt-bindings: mailbox: imx-mu: add generic MU channel supportOleksij Rempel
Each MU has four pairs of rx/tx data register with four rx/tx interrupts which can also be used as a separate channel. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15dt-bindings: arm: fsl: add mu binding docDong Aisheng
The Messaging Unit module enables two processors within the SoC to communicate and coordinate by passing messages (e.g. data, status and control) through the MU interface. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-14PCI: Limit config space size for Netronome NFP5000Jakub Kicinski
Like the NFP4000 and NFP6000, the NFP5000 as an erratum where reading/ writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP5000's PF's config space size to 0x600 bytes as is already done for the NFP4000 and NFP6000. The NFP5000's VF is 0x6003 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tony Egan <tony.egan@netronome.com>
2018-08-14Merge tag 'for-linus-4.19-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - add dma-buf functionality to Xen grant table handling - fix for booting the kernel as Xen PVH dom0 - fix for booting the kernel as a Xen PV guest with CONFIG_DEBUG_VIRTUAL enabled - other minor performance and style fixes * tag 'for-linus-4.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix balloon initialization for PVH Dom0 xen: don't use privcmd_call() from xen_mc_flush() xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits xen/biomerge: Use true and false for boolean values xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failure xen/spinlock: Don't use pvqspinlock if only 1 vCPU xen/gntdev: Implement dma-buf import functionality xen/gntdev: Implement dma-buf export functionality xen/gntdev: Add initial support for dma-buf UAPI xen/gntdev: Make private routines/structures accessible xen/gntdev: Allow mappings for DMA buffers xen/grant-table: Allow allocating buffers suitable for DMA xen/balloon: Share common memory reservation routines xen/grant-table: Make set/clear page private code shared
2018-08-14Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A bunch of good stuff in here. Worth noting is that we've pulled in the x86/mm branch from -tip so that we can make use of the core ioremap changes which allow us to put down huge mappings in the vmalloc area without screwing up the TLB. Much of the positive diffstat is because of the rseq selftest for arm64. Summary: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) arm64: alternative: Use true and false for boolean values arm64: kexec: Add comment to explain use of __flush_icache_range() arm64: sdei: Mark sdei stack helper functions as static arm64, kaslr: export offset in VMCOREINFO ELF notes arm64: perf: Add cap_user_time aarch64 efi/libstub: Only disable stackleak plugin for arm64 arm64: drop unused kernel_neon_begin_partial() macro arm64: kexec: machine_kexec should call __flush_icache_range arm64: svc: Ensure hardirq tracing is updated before return arm64: mm: Export __sync_icache_dcache() for xen-privcmd drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory arm64: Add support for STACKLEAK gcc plugin arm64: Add stack information to on_accessible_stack drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported arm64: fix ACPI dependencies rseq/selftests: Add support for arm64 arm64: acpi: fix alignment fault in accessing ACPI efi/arm: map UEFI memory map even w/o runtime services enabled efi/arm: preserve early mapping of UEFI memory map longer for BGRT drivers: acpi: add dependency of EFI for arm64 ...
2018-08-14IB/core: Avoid confusing del_netdev_default_ipsParav Pandit
Currently bond_delete_netdev_default_gids() is called by two callers. (a) del_netdev_default_ips_join() (b) del_netdev_default_ips() Both above functions changes the argument order while calling bond_delete_netdev_default_gids(). This required silly del_netdev_default_ips() wrapper. Additionally, del_netdev_default_ips() deletes default GIDs not IP based GIDs. del_netdev_default_ips() having _ips suffix is confusing. Therefore, get rid of confusing del_netdev_default_ips() and simplify bond_delete_netdev_default_gids() to follow same argument order as its caller. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14IB/core: Add comment for change upper netevent handlingParav Pandit
Add comment for handling CHANGEUPPER netevent handling. To improve code readability, (a) move cmd definitions to its respective if-else branches, (b) avoid single line structure definitions. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add user space support for SRQYuval Bason
This patch adds support for SRQ's created in user space and update qedr_affiliated_event to deal with general SRQ events. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add support for kernel mode SRQ'sYuval Bason
Implement the SRQ specific verbs and update the poll_cq verb to deal with SRQ completions. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14qedr: Add wrapping generic structure for qpidr and adjust idr routines.Yuval Bason
Today, we are using idr mechanism for QP's only. This patch prepares the qedr_idr stuctures and the idr routines for both QP's and SRQ's. Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-15ubifs: Set default assert action to read-onlyRichard Weinberger
Traditionally UBIFS just reported a failed assertion and moved on. The drawback is that users will notice UBIFS bugs when it is too late, most of the time when it is no longer about to mount. This makes bug hunting problematic since valuable information from failing asserts is long gone when UBIFS is dead. The other extreme, panic'ing on a failing assert is also not worthwhile, we want users and developers give a chance to collect as much debugging information as possible if UBIFS hits an assert. Therefore go for the third option, switch to read-only mode when an assert fails. That way UBIFS will not write possible bad data to the MTD and gives users the chance to collect debugging information. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Allow setting assert action as mount parameterRichard Weinberger
Expose our three options to userspace. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Rework ubifs_assert()Richard Weinberger
With having access to struct ubifs_info in ubifs_assert() we can give more information when an assert is failing. By using ubifs_err() we can tell which UBIFS instance failed. Also multiple actions can be taken now. We support: - report: This is what UBIFS did so far, just report the failure and go on. - read-only: Switch to read-only mode. - panic: shoot the kernel in the head. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Pass struct ubifs_info to ubifs_assert()Richard Weinberger
This allows us to have more context in ubifs_assert() and take different actions depending on the configuration. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Turn two ubifs_assert() into a WARN_ON()Richard Weinberger
We are going to pass struct ubifs_info to ubifs_assert() but while unloading the UBIFS module we don't have the info struct anymore. Therefore replace the asserts by a regular WARN_ON(). Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: expose the volume CRC check skip flagQuentin Schulz
Now that we have the logic for skipping CRC check for static UBI volumes in the core, let's expose it to users. This makes use of a padding byte in the volume description data structure as a flag. This flag only tell for now whether we should skip the CRC check of a volume. This checks the UBI volume for which we are trying to skip the CRC check is static. Let's also make sure that the flags passed to verify_mkvol_req are valid. We voluntarily do not take into account the skip_check flag in vol_cdev_write() as we want to make sure what we wrote was correctly written. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Use kmalloc_array()Richard Weinberger
Since commit 6da2ec56059c ("treewide: kmalloc() -> kmalloc_array()") we use kmalloc_array() for kmalloc() that computes the length with a multiplication. Cc: Kees Cook <keescook@chromium.org> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Check data node size before truncateRichard Weinberger
Check whether the size is within bounds before using it. If the size is not correct, abort and dump the bad data node. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15Revert "UBIFS: Fix potential integer overflow in allocation"Richard Weinberger
This reverts commit 353748a359f1821ee934afc579cf04572406b420. It bypassed the linux-mtd review process and fixes the issue not as it should. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Add comment on c->commit_semRichard Weinberger
Every single time I come across that code, I get confused because it looks like a possible dead lock. Help myself by adding a comment. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: introduce Kconfig symbol for xattr supportStefan Agner
Allow to disable extended attribute support. This aids in reliability testing, especially since some xattr related bugs have surfaced. Also an embedded system might not need it, so this allows for a slightly smaller kernel (about 4KiB). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: use swap macro in swap_dirty_idxGustavo A. R. Silva
Make use of the swap macro and remove unnecessary variable *t*. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutralPrarit Bhargava
Commit 5209654a46ee (x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems) forgot to update the ACPI C1 idle state description and tools like turbostat display "ACPI FFH INTEL MWAIT 0x0" which is quite confusing on an AMD system. Drop the "INTEL" part from the ACPI C1 FFH MWAIT C-state description to avoid confusion. Fixes: 5209654a46ee (x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems) Signed-off-by: Prarit Bhargava <prarit@redhat.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14x86: Add entry trampolines to kcoreAdrian Hunter
Without program headers for PTI entry trampoline pages, the trampoline virtual addresses do not map to anything. Example before: sudo gdb --quiet vmlinux /proc/kcore Reading symbols from vmlinux...done. [New process 1] Core was generated by `BOOT_IMAGE=/boot/vmlinuz-4.16.0 root=UUID=a6096b83-b763-4101-807e-f33daff63233'. #0 0x0000000000000000 in irq_stack_union () (gdb) x /21ib 0xfffffe0000006000 0xfffffe0000006000: Cannot access memory at address 0xfffffe0000006000 (gdb) quit After: sudo gdb --quiet vmlinux /proc/kcore [sudo] password for ahunter: Reading symbols from vmlinux...done. [New process 1] Core was generated by `BOOT_IMAGE=/boot/vmlinuz-4.16.0-fix-4-00005-gd6e65a8b4072 root=UUID=a6096b83-b7'. #0 0x0000000000000000 in irq_stack_union () (gdb) x /21ib 0xfffffe0000006000 0xfffffe0000006000: swapgs 0xfffffe0000006003: mov %rsp,-0x3e12(%rip) # 0xfffffe00000021f8 0xfffffe000000600a: xchg %ax,%ax 0xfffffe000000600c: mov %cr3,%rsp 0xfffffe000000600f: bts $0x3f,%rsp 0xfffffe0000006014: and $0xffffffffffffe7ff,%rsp 0xfffffe000000601b: mov %rsp,%cr3 0xfffffe000000601e: mov -0x3019(%rip),%rsp # 0xfffffe000000300c 0xfffffe0000006025: pushq $0x2b 0xfffffe0000006027: pushq -0x3e35(%rip) # 0xfffffe00000021f8 0xfffffe000000602d: push %r11 0xfffffe000000602f: pushq $0x33 0xfffffe0000006031: push %rcx 0xfffffe0000006032: push %rdi 0xfffffe0000006033: mov $0xffffffff91a00010,%rdi 0xfffffe000000603a: callq 0xfffffe0000006046 0xfffffe000000603f: pause 0xfffffe0000006041: lfence 0xfffffe0000006044: jmp 0xfffffe000000603f 0xfffffe0000006046: mov %rdi,(%rsp) 0xfffffe000000604a: retq (gdb) quit In addition, entry trampolines all map to the same page. Represent that by giving the corresponding program headers in kcore the same offset. This has the benefit that, when perf tools uses /proc/kcore as a source for kernel object code, samples from different CPU trampolines are aggregated together. Note, such aggregation is normal for profiling i.e. people want to profile the object code, not every different virtual address the object code might be mapped to (across different processes for example). Notes by PeterZ: This also adds the KCORE_REMAP functionality. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1528289651-4113-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14kallsyms, x86: Export addresses of PTI entry trampolinesAlexander Shishkin
Currently, the addresses of PTI entry trampolines are not exported to user space. Kernel profiling tools need these addresses to identify the kernel code, so add a symbol and address for each CPU's PTI entry trampoline. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1528289651-4113-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14kallsyms: Simplify update_iter_mod()Adrian Hunter
The logic in update_iter_mod() is overcomplicated and gets worse every time another get_ksymbol_* function is added. In preparation for adding another get_ksymbol_* function, simplify logic in update_iter_mod(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: (ftrace changes only) Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1528289651-4113-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-15cpuidle: menu: Fix white spaceRafael J. Wysocki
Fix some damaged white space in menu_select(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15PM / sleep: wakeup: Fix build error caused by missing SRCU supportzhangyi (F)
Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to select CONFIG_SRCU in Kconfig, which leads to the following build error if CONFIG_SRCU is not selected somewhere else: drivers/built-in.o: In function `wakeup_source_remove': (.text+0x3c6fc): undefined reference to `synchronize_srcu' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c7a8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c84c): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d1d8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d228): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d24c): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d29c): undefined reference to `__srcu_read_unlock' drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu' Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled. Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU) Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> [ rjw: Minor subject/changelog fixups ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15ubifs: tnc: use monotonic znode timestampArnd Bergmann
The tnc uses get_seconds() based timestamps to check the age of a znode, which has two problems: on 32-bit architectures this may overflow in 2038 or 2106, and it gives incorrect information when the system time is updated using settimeofday(). Using montonic timestamps with ktime_get_seconds() solves both thes problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: use timespec64 for inode timestampsArnd Bergmann
Both vfs and the on-disk inode structures can deal with fine-grained timestamps now, so this is the last missing piece to make ubifs y2038-safe on 32-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: xattr: Don't operate on deleted inodesRichard Weinberger
xattr operations can race with unlink and the following assert triggers: UBIFS assert failed in ubifs_jnl_change_xattr at 1606 (pid 6256) Fix this by checking i_nlink before working on the host inode. Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: gc: Fix typoRichard Weinberger
UBIFS operates on LEBs, not PEBs. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Fix memory leak in lprobs self-checkRichard Weinberger
Allocate the buffer after we return early. Otherwise memory is being leaked. Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: Initialize Fastmap checkmapping correctlyRichard Weinberger
We cannot do it last, otherwithse it will be skipped for dynamic volumes. Reported-by: Lachmann, Juergen <juergen.lachmann@harman.com> Fixes: 34653fd8c46e ("ubi: fastmap: Check each mapping only once") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Fix synced_i_size calculation for xattr inodesRichard Weinberger
In ubifs_jnl_update() we sync parent and child inodes to the flash, in case of xattrs, the parent inode (AKA host inode) has a non-zero data_len. Therefore we need to adjust synced_i_size too. This issue was reported by ubifs self tests unter a xattr related work load. UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4 Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Fix directory size calculation for symlinksRichard Weinberger
We have to account the name of the symlink and not the target length. Fixes: ca7f85be8d6c ("ubifs: Add support for encrypted symlinks") Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-14perf auxtrace: Fix queue resizeAdrian Hunter
When the number of queues grows beyond 32, the array of queues is resized but not all members were being copied. Fix by also copying 'tid', 'cpu' and 'set'. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: e502789302a6e ("perf auxtrace: Add helpers for queuing AUX area tracing data") Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14x86/smp: fix non-SMP broken build due to redefinition of ↵Vlastimil Babka
apic_id_is_primary_thread The function has an inline "return false;" definition with CONFIG_SMP=n but the "real" definition is also visible leading to "redefinition of ‘apic_id_is_primary_thread’" compiler error. Guard it with #ifdef CONFIG_SMP Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Fixes: 6a4d2657e048 ("x86/smp: Provide topology_is_primary_thread()") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-14cpu/hotplug: Non-SMP machines do not make use of booted_onceAbel Vesa
Commit 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") breaks non-SMP builds. [ I suspect the 'bool' fields should just be made to be bitfields and be exposed regardless of configuration, but that's a separate cleanup that I'll leave to the owners of this file for later. - Linus ] Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Abel Vesa <abelvesa@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-14ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fieldsHans de Goede
Prior to this commit the CRC PMOP handler only supported the X285 and V18X PMOP fields. Leading to errors like these on device using the VBUS field: [ 765.766489] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20180531/evregion-266) [ 765.766526] ACPI Error: Method parse/execution failed \_SB.I2C1.BATC._BST, AE_BAD_PARAMETER (20180531/psparse-516) [ 765.766586] ACPI Error: AE_BAD_PARAMETER, Evaluating _BST (20180531/battery-577) This commit adds support for all known fields to the CRC PMOP OpRegion handler, the name and register info in this commit comes from: https://github.com/01org/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/0002-ACPI-Adding-support-for-WC-and-CRC-opregion.patch Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Clear status of all events when entering sleep statesRafael J. Wysocki
Commit fa85015c0d95 (ACPICA: Clear status of all events when entering S5) made the sleep state entry code in ACPICA clear the status of all ACPI events when entering S5 to fix a functional regression reported against commit 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume). However, it is reported now that the regression also affects system states other than S5 on some systems and causes them to wake up from sleep prematurely. For this reason, make the code in question clear the status of all ACPI events when entering all sleep states (in addition to S5) to avoid the premature wakeups (this may cause some wakeup events to be missed in theory, but the likelihood of that is small and the change here simply restores the previous behavior of the code). Fixes: 18996f2db918 (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume) Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: fa85015c0d95 ACPICA: Clear status ... Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14perf python: Remove -mcet and -fcf-protection when building with clangArnaldo Carvalho de Melo
These options are not present in older clang versions, so when we build for a distro that has a gcc new enough to have these options and that the distro python build config settings use them but clang doesn't support, b00m. This is the case with fedora 28 and rawhide, so check if clang has the options and remove the missing ones from CFLAGS. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-7asds7yn6gzg6ns1lw17ukul@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14ACPICA: Update version to 20180810Bob Moore
Version 20180810. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: acpiexec: fix a small memory leak regressionBob Moore
Eliminates warnings only seen when acpiexec exits. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Reference Counts: increase max to 0x4000 for large serversErik Schmauss
Increase the reference count limit to 0x4000 as the current one is not sufficient for some large server systems. Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com> Tested-by: Russ Anderson <russ.anderson@hpe.com> Reported-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: Reference count: add additional debugging detailsErik Schmauss
Make reference counting diagnostics provide more information on what has happened. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-14ACPICA: acpi_exec: fixing -fi optionErik Schmauss
Field elements listed in the init file used to be initialized after the table load and before executing module-level code blocks. The recent changes in module-level code mean that the table load becomes a method execution. If fields are used within module-level code and we are executing with -fi option, then these values are populated after the table has finished loading. This commit changes the initialization of objects listed in the init file so that field unit values are populated during the table load. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 05:53:33 +0000