summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-11xfs: split buffered IO write path from xfs_file_aio_writeDave Chinner
Complete the split of the different write IO paths by splitting the buffered IO write path out of xfs_file_aio_write(). This makes the different mechanisms of the write patchs easier to follow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: split direct IO write path from xfs_file_aio_writeDave Chinner
The current xfs_file_aio_write code is a mess of locking shenanigans to handle the different locking requirements of buffered and direct IO. Start to clean this up by disentangling the direct IO path from the mess. This also removes the failed direct IO fallback path to buffered IO. XFS handles all direct IO cases without needing to fall back to buffered IO, so we can safely remove this unused path. This greatly simplifies the logic and locking needed in the write path. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-12xfs: introduce xfs_rw_lock() helpers for locking the inodeDave Chinner
We need to obtain the i_mutex, i_iolock and i_ilock during the read and write paths. Add a set of wrapper functions to neatly encapsulate the lock ordering and shared/exclusive semantics to make the locking easier to follow and get right. Note that this changes some of the exclusive locking serialisation in that serialisation will occur against the i_mutex instead of the XFS_IOLOCK_EXCL. This does not change any behaviour, and it is arguably more efficient to use the mutex for such serialisation than the rw_sem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: factor post-write newsize updatesDave Chinner
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: factor common post-write isize handling codeDave Chinner
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: ensure sync write errors are returnedDave Chinner
xfs_file_aio_write() only returns the error from synchronous flushing of the data and inode if error == 0. At the point where error is being checked, it is guaranteed to be > 0. Therefore any errors returned by the data or fsync flush will never be returned. Fix the checks so we overwrite the current error once and only if an error really occurred. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Avoid array overflow if there are too many cpus in SRAT table [IA64] Remove unlikely from cpu_is_offline [IA64] irq_ia64, use set_irq_chip [IA64] perfmon: Change vmalloc to vzalloc and drop memset. [IA64] eliminate race condition in smp_flush_tlb_mm
2011-01-10Merge branch 'for-torvalds' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ux500: allow 5500 and 8500 to be built together ux500: modem_irq is only for 5500 ux500: dynamic SOC detection ux500: rename MOP board Kconfig ux500: remove build-time changing macros
2011-01-10Merge branch 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: add SMP support for msm msm: hotplug: support cpu hotplug on msm msm: timer: SMP timer support for msm msm: scm-boot: Support for setting cold/warm boot addresses msm: Secure Channel Manager (SCM) support
2011-01-10omap3: igep2: Add keypad supportEnric Balletbo i Serra
Support twl4030 keypad and gpio keys on IGEP v2. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10omap3: igep3: Fix IGEP module second MMC channel power supplyEnric Balletbo i Serra
The second MMC channel (used by the WLAN/BT module) is not linked to power regulator. This causes the WLAN/BT module to fail being detected if CONFIG_REGULATOR_DUMMY is not set. This patch adds the two regulators that actually feed the WLAN/BT module (1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the second channel is properly detected. Also change vmmc1 to use symbolic names instead of direct device reference. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10ASoC: cs4270: use the built-in register cache supportTimur Tabi
Update the CS4270 driver to use ASoC's internal codec register cache feature. This change allows ASoC to perform the low-level I2C operations necessary to read the register cache. Support is also added for initializing the register cache with an array of known power-on default values. The CS4270 driver was handling the register cache itself, but somwhere along the conversion to multi-compaonent, this feature broke. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10omap3: igep3: Add USB EHCI support for IGEP moduleEnric Balletbo i Serra
The OMAP3 IGEP module has one EHCI interface on board using USB2HS port. GPIO183 is used as PHY reset. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10Merge branch 'ehci-omap-clock' into omap-fixesTony Lindgren
2011-01-10omap3: clocks: Fix build error 'CK_3430ES2' undeclared hereSantosh Shilimkar
At latest mainline commit 0c21e3aaf6a, omap2plus build is broken. This patch is trivial fix for the missed usb clock node for CK_3430ES2PLUS flag update. CHK include/generated/compile.h CC arch/arm/mach-omap2/clock3xxx_data.o arch/arm/mach-omap2/clock3xxx_data.c:3289: error: 'CK_3430ES2' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/clock3xxx_data.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated mask to include CK_36XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10cxgb4vf: fix mailbox data/control coherency domain raceCasey Leedom
For the VFs, the Mailbox Data "registers" are actually backed by T4's "MA" interface rather than PL Registers (as is the case for the PFs). Because these are in different coherency domains, the write to the VF's PL-register-backed Mailbox Control can race in front of the writes to the MA-backed VF Mailbox Data "registers". So we need to do a read-back on at least one byte of the VF Mailbox Data registers before doing the write to the VF Mailbox Control register. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: change module parameter permissionsamit salecha
o Updating module parameter after driver load is not supported except auto_fw_reset parameter. Changing these parameter after driver load, can have weird result. o Update driver version to 5.0.15. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix ethtool diagnostics testSony Chacko
IRQ diag test was getting executed only when both register test and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE flag is set. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix flash fw version readamit salecha
Driver is reading flash fw version from defined address, this address may be invalid. Indeed Driver should read address for fw version through flash layout table. Flash layout table has defined region and address for fw version address should be read from fw image region. Driver has check for old firmware, this bug can cause driver load fail. This patch will try to read fw version from flash image region, if that fails, read from defined address. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10phonet: some signedness bugsDan Carpenter
Dan Rosenberg pointed out that there were some signed comparison bugs in the phonet protocol. http://marc.info/?l=full-disclosure&m=129424528425330&w=2 The problem is that we check for array overflows but "protocol" is signed and we don't check for array underflows. If you have already have CAP_SYS_ADMIN then you could use the bugs to get root, or someone could cause an oops by mistake. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: let boards set vlan masksMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: disable hardware checksum if writeback cache is enabledSonic Zhang
With writeback caches, corrupted RX packets will be sent up the stack without any error markings. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: drop unused Mac dataMike Frysinger
We don't use this local "Mac" data anywhere (since we rely on the netdev's storage), so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: mark setup_system_regs as staticMike Frysinger
No need for this to be exported since it is only used in this driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: clean up printk messagesMike Frysinger
Use netdev_* and pr_* helper funcs for output rather than printk. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10i2c: Constify i2c_client where possibleJean Delvare
Helper functions for I2C and SMBus transactions don't modify the i2c_client that is passed to them, so it can be marked const. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10i2c-algo-bit: Complain about masters which can't read SCLJean Delvare
The I2C specification explicitly describes both SDA and SCL as bidirectional lines. An I2C master with a read-only SCL is thus not compliant. If a slow slave stretches the clock, errors will happen, so the bus can't be considered as reliable. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10i2c-algo-bit: Refactor adapter registrationJean Delvare
Use a function pointer to decide whether to call i2c_add_adapter or i2c_add_numbered_adapter. This makes the code more compact than the current strategy of having the common code in a separate function. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10i2c: Add generic I2C multiplexer using GPIO APIPeter Korsgaard
Add an i2c mux driver providing access to i2c bus segments using a hardware MUX sitting on a master bus and controlled through gpio pins. E.G. something like: ---------- ---------- Bus segment 1 - - - - - | | SCL/SDA | |-------------- | | | |------------| | | | | | Bus segment 2 | | | Linux | GPIO 1..N | MUX |--------------- Devices | |------------| | | | | | | | Bus segment M | | | |---------------| | ---------- ---------- - - - - - SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M according to the settings of the GPIO pins 1..N. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10i2c-nforce2: Remove unnecessary cast of pci_get_drvdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10i2c-i801: Include <linux/slab.h>Ben Hutchings
Commit 5a0e3ad6af8660be21ca98a971cd00f331318c05 added direct inclusion of <linux/slab.h> to those source files that appeared to need it, but somehow missed this. On most architectures <linux/slab.h> is still indirectly included, but there are exceptions such as alpha. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-10cciss: reinstate proper FIFO order of command queue listJens Axboe
Commit 8a3173de inadvertently changed the ordering when switching to hlists. Change to regular list heads so we can use tail list adds, this improves performance. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-10IB/srp: consolidate hot-path variables into cache linesDavid Dillow
Put the variables accessed together in the hot-path into common cachelines, and separate them by RW vs RO to avoid false dirtying. We keep a local copy of the lkey and rkey in the target to avoid traversing pointers (and associated cache lines) to find them. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: stop sharing the host lock with SCSIBart Van Assche
We don't need protection against the SCSI stack, so use our own lock to allow parallel progress on separate CPUs. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: reduce lock coverage of command completionBart Van Assche
We only need the lock to cover list and credit manipulations, so push those into srp_remove_req() and update the call chains. We reorder the request removal and command completion in srp_process_rsp() to avoid the SCSI mid-layer sending another command before we've released our request and added any credits returned by the target. This prevents us from returning HOST_BUSY unneccesarily. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out, small cleanups, and modified to avoid potential extraneous HOST_BUSY returns by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: reduce local coverage for command submission and EHBart Van Assche
We only need locks to protect our lists and number of credits available. By pre-consuming the credit for the request, we can reduce our lock coverage to just those areas. If we don't actually send the request, we'll need to put the credit back into the pool. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: don't move active requests to their own listBart Van Assche
We use req->scmnd != NULL to indicate an active request, so there's no need to keep a separate list for them. We can afford the array iteration during error handling, and dropping it gives us one less item that needs lock protection. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10hostap_cs: fix sleeping function called from invalid contextStanislaw Gruszka
pcmcia_request_irq() and pcmcia_enable_device() are intended to be called from process context (first function allocate memory with GFP_KERNEL, second take a mutex). We can not take spin lock and call them. It's safe to move spin lock after pcmcia_enable_device() as we still hold off IRQ until dev->base_addr is 0 and driver will not proceed with interrupts when is not ready. Patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=643758 Reported-and-tested-by: rbugz@biobind.com Cc: stable@kernel.org # 2.6.34+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ipw2200: Check for -1 INTA in tasklet too.Indan Zupancic
This is an attempt to fix a long standing open bug: http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1334 The interrupt handler checks for INTA being -1, apparently that means that the hardware is gone. But the interrupt handler defers actual interrupt processing to a tasklet. By the time the tasklet is run and checks INTA again, the hardware might be gone and INTA be -1, which confuses the driver because all event bits are set. The patch applies to 2.6.37. Signed-off-by: Indan Zupancic <indan@nul.nu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ssb: Ignore dangling ethernet cores on wireless devicesMichael Büsch
Some Broadcom based wireless devices contain dangling ethernet cores. This triggers the ssb probing mechanism and tries to load the b44 driver on this core. Ignore the dangling core in the ssb core scanning code to avoid access to the core and failure of b44 probing. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10p54: fix sequence no. accounting off-by-one errorChristian Lamparter
P54_HDR_FLAG_DATA_OUT_SEQNR is meant to tell the firmware that "the frame's sequence number has already been set by the application." Whereas IEEE80211_TX_CTL_ASSIGN_SEQ is set for frames which lack a valid sequence number and either the driver or firmware has to assign one. Yup, it's the exact opposite! Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10mac80211: add doc short section on LED triggersJohannes Berg
Just create a section to collect the LED trigger functions and add a very short description as to what drivers should do. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10nl80211: add/fix mesh docsJohannes Berg
Some mesh attribute/command docs are missing or have errors in the name so they don't match, fix all of them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10cfg80211: add mesh join/leave callback docsJohannes Berg
When I made the patch to add mesh join/leave I didn't pay attention to docs because it was a proof of concept, and then when we actually did merge it I forgot -- add docs now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10mac80211: add missing docs for off-chan TX flagJohannes Berg
The flag is IEEE80211_TX_CTL_TX_OFFCHAN and I had added that in a previous patch but forgotten docs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ath9k_htc: Really fix packet injectionSujith Manoharan
The chainmask value along with other configuration has to be set on the target for packet injection. Fix this and also move the monitor interface addition before the channel set segment to ensure that the opmode is updated properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10mac80211: add remain-on-channel docsJohannes Berg
Add documentation for the new callbacks that I forgot in the patch adding the callbacks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ath9k_hw: Fix RX handling for USB devicesSujith Manoharan
Commit "ath9k_hw: Abort rx if hw is not coming out of full sleep in reset" uncondionally added aborting RX DMA in a HW reset, though it is a bit unclear as to why this is needed. Anyway, RX DMA is handled in the target for USB devices, and this would interfere with normal operations (scanning etc.), so fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ath9k_hw: Fix thermal issue with UB94Sujith Manoharan
Hardcode the output voltage of x-PA bias LDO to the lowest value for UB94. The card doesn't get too hot now. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-10ath9k_hw: Fix calibration for AR9287 devicesSujith Manoharan
AR9287 based devices have issues with ADC gain calibration which would cause uplink throughput drops in HT40 mode. Remove ADC gain from the supported calibration algorithms. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-22 22:57:15 +0000