summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-04nvmem: u-boot-env: use nvmem device helpersRafał Miłecki
Use nvmem_dev_size() and nvmem_device_read() to make this driver less mtd dependent. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-4-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: u-boot-env: use nvmem_add_one_cell() nvmem subsystem helperRafał Miłecki
Simplify adding NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-3-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: core: add nvmem_dev_size() helperRafał Miłecki
This is required by layouts that need to read whole NVMEM content. It's especially useful for NVMEM devices without hardcoded layout (like U-Boot environment data block). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: drop nvmem_layout_get_match_data()Rafał Miłecki
Thanks for layouts refactoring we now have "struct device" associated with layout. Also its OF pointer points directly to the "nvmem-layout" DT node. All it takes to get match data is a generic of_device_get_match_data(). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231219120104.3422-2-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: layouts: refactor .add_cells() callback argumentsRafał Miłecki
Simply pass whole "struct nvmem_layout" instead of single variables. There is nothing in "struct nvmem_layout" that we have to hide from layout drivers. They also access it during .probe() and .remove(). Thanks to this change: 1. API gets more consistent All layouts drivers callbacks get the same argument 2. Layouts get correct device Before this change NVMEM core code was passing NVMEM device instead of layout device. That resulted in: * Confusing prints * Calling devm_*() helpers on wrong device * Helpers like of_device_get_match_data() dereferencing NULLs 3. It gets possible to get match data First of all nvmem_layout_get_match_data() requires passing "struct nvmem_layout" which .add_cells() callback didn't have before this. It doesn't matter much as it's rather useless now anyway (and will be dropped). What's more important however is that of_device_get_match_data() can be used now thanks to owning a proper device pointer. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04rpc_pipefs: Replace one label in bl_resolve_deviceid()Markus Elfring
The kfree() function was called in one case by the bl_resolve_deviceid() function during error handling even if the passed data structure member contained a null pointer. This issue was detected by using the Coccinelle software. Thus use an other label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04nfs: Remove writepageMatthew Wilcox (Oracle)
NFS already has writepages and migrate_folio, so it does not need to implement writepage. The writepage operation is deprecated as it leads to worse performance under high memory pressure due to folios being written out in LRU order rather than sequentially within a file. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFS: drop unused nfs_direct_req bytes_leftBenjamin Coddington
Now that we're calculating how large a remaining IO should be based on the current request's offset, we no longer need to track bytes_left on each struct nfs_direct_req. Drop the field, and clean up the direct request tracepoints. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04pNFS: Fix the pnfs block driver's calculation of layoutget sizeTrond Myklebust
Instead of relying on the value of the 'bytes_left' field, we should calculate the layout size based on the offset of the request that is being written out. Reported-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Fixes: 954998b60caa ("NFS: Fix error handling for O_DIRECT write scheduling") Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04nfs: print fileid in lookup tracepointsJeff Layton
With this we can see the dentry -> inode linkage that's being revalidated. A fileid of 0 means "negative dentry". Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04nfs: rename the nfs_async_rename_done tracepointJeff Layton
We do async renames in other cases besides sillyrenames now. This tracepoint name is now misleading. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04nfs: add new tracepoint at nfs4 revalidate entry pointJeff Layton
Add a call to the v4 d_revalidate entrypoint, just like the v3 one. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04SUNRPC: fix _xprt_switch_find_current_entry logicOlga Kornievskaia
Fix the logic for picking current transport entry. Fixes: 95d0d30c66b8 ("SUNRPC create an iterator to list only OFFLINE xprts") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFSv4.1/pnfs: Ensure we handle the error NFS4ERR_RETURNCONFLICTTrond Myklebust
Once the client has processed the CB_LAYOUTRECALL, but has not yet successfully returned the layout, the server is supposed to switch to returning NFS4ERR_RETURNCONFLICT. This patch ensures that we handle that return value correctly. Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFSv4.1: if referring calls are complete, trust the stateid argumentTrond Myklebust
If the server is recalling a layout, and sends us a list of referring calls that we can see are complete, then we should just trust that the stateid argument is correct, even if the sequence id doesn't match the one we hold. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFSv4: Track the number of referring calls in struct cb_process_stateTrond Myklebust
When the server gives us a set of referring calls, to tell us that the NFSv4.1 callback needs to be ordered with respect to those calls, then we may want to make that information available to the operations. In certain cases, it may allow them to optimise their behaviour due to the extra knowledge. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFS: Use parent's objective cred in nfs_access_login_time()Scott Mayhew
The subjective cred (task->cred) can potentially be overridden and subsquently freed in non-RCU context, which could lead to a panic if we try to use it in cred_fscmp(). Use __task_cred(), which returns the objective cred (task->real_cred) instead. Fixes: 0eb43812c027 ("NFS: Clear the file access cache upon login") Fixes: 5e9a7b9c2ea1 ("NFS: Fix up a sparse warning") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04NFSv4: Always ask for type with READDIRBenjamin Coddington
Again we have claimed regressions for walking a directory tree, this time with the "find" utility which always tries to optimize away asking for any attributes until it has a complete list of entries. This behavior makes the readdir plus heuristic do the wrong thing, which causes a storm of GETATTRs to determine each entry's type in order to continue the walk. For v4 add the type attribute to each READDIR request to include it no matter the heuristic. This allows a simple `find` command to proceed quickly through a directory tree. Suggested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04pnfs/blocklayout: Don't add zero-length pnfs_block_devBenjamin Coddington
We noticed a SCSI device that refused to allow READ CAPACITY when the device had a PR with exclusive access, registrants only. The result of this situation is that the blocklayout driver adds a pnfs_block_dev of zero length which always fails the offset_in_map tests. Instead of continuously trying to do pNFS for this case, just mark the device as unavailable which will allow the client to fallback to the MDS for the duration of PNFS_DEVICE_RETRY_TIMEOUT. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04blocklayoutdriver: Fix reference leak of pnfs_device_nodeBenjamin Coddington
The error path for blocklayout's device lookup is missing a reference drop for the case where a lookup finds the device, but the device is marked with NFS_DEVICEID_UNAVAILABLE. Fixes: b3dce6a2f060 ("pnfs/blocklayout: handle transient devices") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04SUNRPC: Fix a suspicious RCU usage warningAnna Schumaker
I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969] __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [ 57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007fe2b11f8300 R11: 0000000000000202 R12: 0000000000000000 [ 57.202994] R13: 00007ffe857dfd80 R14: 00007fe2b1445000 R15: 0000000000000000 [ 57.202999] </TASK> The problem seems to be that two out of three callers aren't taking the rcu_read_lock() before calling the list_for_each_entry_rcu() function in rpc_xprt_switch_has_addr(). I fix this by having rpc_xprt_switch_has_addr() unconditionaly take the rcu_read_lock(), which is okay to do recursively in the case that the lock has already been taken by a caller. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04SUNRPC: Create a helper function for accessing the rpc_clnt's xprt_switchAnna Schumaker
This function takes the necessary rcu read lock to dereference the client's rpc_xprt_switch and bump the reference count so it doesn't disappear underneath us before returning. This does mean that callers are responsible for calling xprt_switch_put() on the returned object when they are done with it. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04SUNRPC: Remove unused function rpc_clnt_xprt_switch_put()Anna Schumaker
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04SUNRPC: Clean up unused variable in rpc_xprt_probe_trunked()Anna Schumaker
We don't use the rpc_xprt_switch anywhere in this function, so let's not take an extra reference to in unnecessarily. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2024-01-04ppdev: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ba9da12fdd5cdb2c28180b7160af5042447d803f.1702962092.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04android: binder: binderfs.c: removed asm-generic/errno-base.hTanzir Hasan
asm-generic/errno-base.h can be replaced by linux/errno.h and the file will still build correctly. It is an asm-generic file which should be avoided if possible. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tanzir Hasan <tanzirh@google.com> Acked-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20231226-binderfs-v1-1-66829e92b523@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: typec: class: fix typec_altmode_put_partner to put plugsRD Babiera
When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released is a plug evaluates against the released altmode's partner instead of the calling altmode, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. Because typec_altmode_set_partner calls get_device() on the port altmode, add partner_adev that points to the port altmode in typec_put_partner to call put_device() on. typec_altmode_set_partner is not called for port altmodes, so add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: <stable@vger.kernel.org> Co-developed-by: Christian A. Ehrhardt <lk@c--e.de> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Signed-off-by: RD Babiera <rdbabiera@google.com> Tested-by: Christian A. Ehrhardt <lk@c--e.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240103181754.2492492-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04KVM: x86/pmu: fix masking logic for MSR_CORE_PERF_GLOBAL_CTRLPaolo Bonzini
When commit c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") switched the initialization of cpuc->guest_switch_msrs to use compound literals, it screwed up the boolean logic: + u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable; ... - arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask; - arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable); + .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask), Before the patch, the value of arr[0].guest would have been intel_ctrl & ~cpuc->intel_ctrl_host_mask & ~pebs_mask. The intent is to always treat PEBS events as host-only because, while the guest runs, there is no way to tell the processor about the virtual address where to put PEBS records intended for the host. Unfortunately, the new expression can be expanded to (intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask) which makes no sense; it includes any bit that isn't *both* marked as exclude_guest and using PEBS. So, reinstate the old logic. Another way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask | pebs_mask)", presumably the intention of the author of the faulty. However, I personally find the repeated application of A AND NOT B to be a bit more readable. This shows up as guest failures when running concurrent long-running perf workloads on the host, and was reported to happen with rcutorture. All guests on a given host would die simultaneously with something like an instruction fault or a segmentation violation. Reported-by: Paul E. McKenney <paulmck@kernel.org> Analyzed-by: Sean Christopherson <seanjc@google.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Cc: stable@vger.kernel.org Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-01-04serial: sc16is7xx: refactor EFR lockHugo Villeneuve
Move common code for EFR lock/unlock of mutex into functions for code reuse and clarity. With the addition of old_lcr, move irda_mode within struct sc16is7xx_one to reduce memory usage: Before: /* size: 752, cachelines: 12, members: 10 */ After: /* size: 744, cachelines: 12, members: 10 */ Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-17-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: reorder code to remove prototype declarationsHugo Villeneuve
Move/reorder some functions to remove sc16is7xx_ier_set() and sc16is7xx_stop_tx() prototypes declarations. No functional change. sc16is7xx_ier_set() was introduced in commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop"). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-16-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: refactor FIFO access functions to increase commonalityHugo Villeneuve
Simplify FIFO access functions by avoiding to declare a struct sc16is7xx_port *s variable within each function. This is mainly done to have more commonality between the max310x and sc16is7xx drivers. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-15-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: drop unneeded MODULE_ALIASHugo Villeneuve
The MODULE_DEVICE_TABLE() already creates the proper aliases for the SPI driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-14-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: replace hardcoded divisor value with BIT() macroHugo Villeneuve
To better show why the limit is what it is, since we have only 16 bits for the divisor. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-13-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add explicit return for some switch default casesHugo Villeneuve
Allows to simplify code by removing the break statement in the default switch/case in some functions. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-12-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add macro for max number of UART portsHugo Villeneuve
Add macro to hold the maximum number of UART ports per IC/device. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-11-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add driver name to struct uart_driverHugo Villeneuve
Make sure that the driver name is displayed instead of "unknown" when displaying the driver infos: Before: grep ttySC /proc/tty/drivers unknown /dev/ttySC 243 0-7 serial After: grep ttySC /proc/tty/drivers sc16is7xx /dev/ttySC 243 0-7 serial Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-10-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use i2c_get_match_data()Hugo Villeneuve
Use preferred i2c_get_match_data() instead of device_get_match_data() and i2c_client_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-9-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use spi_get_device_match_data()Hugo Villeneuve
Use preferred spi_get_device_match_data() instead of device_get_match_data() and spi_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-8-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfieldHugo Villeneuve
Replace the explicit sc16is7xx_lines bitfield declaration with the generic macro DECLARE_BITMAP() to reserve just enough memory to contain all required bits. This also improves code self-documentation by showing the maximum number of bits required. This conversion now makes sc16is7xx_lines an array, so drop the "&" before sc16is7xx_lines in all bit access functions. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()Hugo Villeneuve
Simplify and improve readability by replacing while(1) loop with do {} while, and by using the keep_polling variable as the exit condition, making it more explicit. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()Hugo Villeneuve
Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: set safe default SPI clock frequencyHugo Villeneuve
15 MHz is supported only by 76x variants. If the SPI clock frequency is not specified, use a safe default clock value of 4 MHz that is supported by all variants. Also use HZ_PER_MHZ macro to improve readability. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add check for unsupported SPI modes during probeHugo Villeneuve
The original comment is confusing because it implies that variants other than the SC16IS762 supports other SPI modes beside SPI_MODE_0. Extract from datasheet: The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752... In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The same is also true of the SC16IS760 variant versus the SC16IS740 and SC16IS750 variants. For all variants, only SPI mode 0 is supported. Change comment and abort probing if the specified SPI mode is not SPI_MODE_0. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe errorHugo Villeneuve
If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable@vger.kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_exar: Set missing rs485_supported flagLino Sanfilippo
The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: omap: do not override settings for RS485 supportLino Sanfilippo
The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called. Also replace the assignment of rs485_config() to have the complete RS485 setup in one function. Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: <stable@vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core, imx: do not set RS485 enabled if it is not supportedLino Sanfilippo
If the imx driver cannot support RS485 it nullifies the ports rs485_supported structure. But it still calls uart_get_rs485_mode() which may set the RS485_ENABLED flag nevertheless. This may lead to an attempt to configure RS485 even if it is not supported when the flag is evaluated in uart_configure_port() at port startup. Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED flag is not supported by the caller. With this fix a check for RTS availability is now obsolete in the imx driver, since it can not evaluate to true any more. So remove this check. Furthermore the explicit nullifcation of rs485_supported is not needed, since the memory has already been set to zeros at allocation. So remove this, too. Fixes: 00d7a00e2a6f ("serial: imx: Fill in rs485_supported") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: make sure RS485 cannot be enabled when it is not supportedLino Sanfilippo
Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. This has a small impact on userspace visibility but it is consistent with the -ENOTTY error for TIOCGRS485. Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported") Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-5-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: fix sanitizing check for RTS settingsLino Sanfilippo
Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS settings in a RS485 configuration that has been passed by userspace. If RTS-on-send and RTS-after-send are both set or unset the configuration is adjusted and RTS-after-send is disabled and RTS-on-send enabled. This however makes only sense if both RTS modes are actually supported by the driver. With commit be2e2cb1d281 ("serial: Sanitize rs485_struct") the code does take the driver support into account but only checks if one of both RTS modes are supported. This may lead to the errorneous result of RTS-on-send being set even if only RTS-after-send is supported. Fix this by changing the implemented logic: First clear all unsupported flags in the RS485 configuration, then adjust an invalid RTS setting by taking into account which RTS mode is supported. Cc: <stable@vger.kernel.org> Fixes: be2e2cb1d281 ("serial: Sanitize rs485_struct") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-4-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: set missing supported flag for RX during TX GPIOLino Sanfilippo
If the RS485 feature RX-during-TX is supported by means of a GPIO set the according supported flag. Otherwise setting this feature from userspace may not be possible, since in uart_sanitize_serial_rs485() the passed RS485 configuration is matched against the supported features and unsupported settings are thereby removed and thus take no effect. Cc: <stable@vger.kernel.org> Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-20 14:02:27 +0000