summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-06igc: Remove unused igc_read/write_pci_cfg wrappersDr. David Alan Gilbert
igc_read_pci_cfg() and igc_write_pci_cfg were added in 2018 as part of commit 146740f9abc4 ("igc: Add support for PF") but have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102174142.200700-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06igc: Remove unused igc_acquire/release_nvmDr. David Alan Gilbert
igc_acquire_nvm() and igc_release_nvm() were added in 2018 as part of commit ab4056126813 ("igc: Add NVM support") but never used. Remove them. The igc_1225.c has it's own specific implementations. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102174142.200700-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06Merge branch 'i40e-deadcoding'Jakub Kicinski
Dr. David Alan Gilbert says: ==================== i40e deadcoding This is a bunch of deadcoding of functions that are entirely uncalled in the i40e driver. Build tested only. ==================== Link: https://patch.msgid.link/20250102173717.200359-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_dcb_hw_get_num_tcDr. David Alan Gilbert
The last useof i40e_dcb_hw_get_num_tc() was removed in 2022 by commit fe20371578ef ("Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-10-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_asq_send_command_v2Dr. David Alan Gilbert
i40e_asq_send_command_v2() was added in 2022 by commit 74073848b0d7 ("i40e: Add new versions of send ASQ command functions") but hasn't been used. Remove it. (The _atomic_v2 version of the function is used, so leave it). Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-9-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_commit_partition_bw_settingDr. David Alan Gilbert
i40e_commit_partition_bw_setting() was added in 2017 by commit 4fc8c6763957 ("i40e: genericize the partition bandwidth control") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-8-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_del_filterDr. David Alan Gilbert
The last use of i40e_del_filter() was removed in 2016 by commit 9569a9a4547d ("i40e: when adding or removing MAC filters, correctly handle VLANs") Remove it. Fix up a comment that referenced it. Note: The __ version of this function is still used. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-7-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_get_cur_guaranteed_fd_countDr. David Alan Gilbert
The last use of i40e_get_cur_guaranteed_fd_count() was removed in 2015 by commit 04294e38a451 ("i40e: FD filters flush policy changes") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-6-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Deadcode profile codeDr. David Alan Gilbert
i40e_add_pinfo_to_list() was added in 2017 by commit 1d5c960c5ef5 ("i40e: new AQ commands") i40e_find_section_in_profile() was added in 2019 by commit cdc594e00370 ("i40e: Implement DDP support in i40e driver") Neither have been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-5-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_(read|write)_phy_registerDr. David Alan Gilbert
i40e_read_phy_register() and i40e_write_phy_register() were added in 2016 by commit f62ba91458b5 ("i40e: Add functions which apply correct PHY access method for read and write operation") but haven't been used. Remove them. (There are more specific _clause* variants of these functions that are still used.) Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-4-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_blink_phy_link_ledDr. David Alan Gilbert
i40e_blink_phy_link_led() was added in 2016 by commit fd077cd3399b ("i40e: Add functions to blink led on 10GBaseT PHY") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Deadcode i40e_aq_*Dr. David Alan Gilbert
i40e_aq_add_mirrorrule(), i40e_aq_delete_mirrorrule() and i40e_aq_set_vsi_vlan_promisc() were added in 2016 by commit 7bd6875bef70 ("i40e: APIs to Add/remove port mirroring rules") but haven't been used. They were the last user of i40e_mirrorrule_op(). i40e_aq_rearrange_nvm() was added in 2018 by commit f05798b4ff82 ("i40e: Add AQ command for rearrange NVM structure") but hasn't been used. i40e_aq_restore_lldp() was added in 2019 by commit c65e78f87f81 ("i40e: Further implementation of LLDP") but hasn't been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06drm/amdgpu: Add a lock when accessing the buddy trim functionArunpravin Paneer Selvam
When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Fixes: 4a5ad08f5377 ("drm/amdgpu: Add address alignment support to DCC buffers") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) Cc: stable@vger.kernel.org
2025-01-06drm/amd/pm: fix BUG: scheduling while atomicKun Liu
atomic scheduling will be triggered in interrupt handler for AC/DC mode switch as following backtrace. Call Trace: <IRQ> dump_stack_lvl __schedule_bug __schedule schedule schedule_preempt_disabled __mutex_lock smu_cmn_send_smc_msg_with_param smu_v13_0_irq_process amdgpu_irq_dispatch amdgpu_ih_process amdgpu_irq_handler __handle_irq_event_percpu handle_irq_event handle_edge_irq __common_interrupt common_interrupt </IRQ> <TASK> asm_common_interrupt Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 03cc84b102d1a832e8dfc59344346dedcebcdf42) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: wq_release signals dma_fence only when availableZhu Lingshan
kfd_process_wq_release() signals eviction fence by dma_fence_signal() which wanrs if dma_fence is NULL. kfd_process->ef is initialized by kfd_process_device_init_vm() through ioctl. That means the fence is NULL for a new created kfd_process, and close a kfd_process right after open it will trigger the warning. This commit conditionally signals the eviction fence in kfd_process_wq_release() only when it is available. [ 503.660882] WARNING: CPU: 0 PID: 9 at drivers/dma-buf/dma-fence.c:467 dma_fence_signal+0x74/0xa0 [ 503.782940] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [ 503.789640] RIP: 0010:dma_fence_signal+0x74/0xa0 [ 503.877620] Call Trace: [ 503.880066] <TASK> [ 503.882168] ? __warn+0xcd/0x260 [ 503.885407] ? dma_fence_signal+0x74/0xa0 [ 503.889416] ? report_bug+0x288/0x2d0 [ 503.893089] ? handle_bug+0x53/0xa0 [ 503.896587] ? exc_invalid_op+0x14/0x50 [ 503.900424] ? asm_exc_invalid_op+0x16/0x20 [ 503.904616] ? dma_fence_signal+0x74/0xa0 [ 503.908626] kfd_process_wq_release+0x6b/0x370 [amdgpu] [ 503.914081] process_one_work+0x654/0x10a0 [ 503.918186] worker_thread+0x6c3/0xe70 [ 503.921943] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.926735] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.931527] ? __kthread_parkme+0x82/0x140 [ 503.935631] ? __pfx_worker_thread+0x10/0x10 [ 503.939904] kthread+0x2a8/0x380 [ 503.943132] ? __pfx_kthread+0x10/0x10 [ 503.946882] ret_from_fork+0x2d/0x70 [ 503.950458] ? __pfx_kthread+0x10/0x10 [ 503.954210] ret_from_fork_asm+0x1a/0x30 [ 503.958142] </TASK> [ 503.960328] ---[ end trace 0000000000000000 ]--- Fixes: 967d226eaae8 ("dma-buf: add WARN_ON() illegal dma-fence signaling") Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2774ef7625adb5fb9e9265c26a59dca7b8fd171e) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Add check for granularity in dml ceil/floor helpersRoman Li
[Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: fixed page fault when enable MES shader debuggerJesse.zhang@amd.com
Initialize the process context address before setting the shader debugger. [ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40 [ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0 [ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41 [ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b231f5bc9ff02ec5737f2ec95cdf15ac95088e9) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix divide error in DM plane scale calcsMelissa Wen
dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Co-developed-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: increase MAX_SURFACES to the value supported by hwMelissa Wen
As the hw supports up to 4 surfaces, increase the maximum number of surfaces to prevent the DC error when trying to use more than three planes. [drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b8d6daffc871a42026c3c20bff7b8fa0302298c1) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix page fault due to max surface definition mismatchMelissa Wen
DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <sunpeng.li@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Remove unnecessary amdgpu_irq_get/putAlex Hung
[WHY & HOW] commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank, and amdgpu_irq_get/put do not need to be called here. Part of that patch got lost somehow, so fix it up. Fixes: 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3782305ce5807c18fbf092124b9e8303cf1723ae) Cc: stable@vger.kernel.org
2025-01-06Merge tag 'vfs-6.13-rc7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Relax assertions on failure to encode file handles The ->encode_fh() method can fail for various reasons. None of them warrant a WARN_ON(). - Fix overlayfs file handle encoding by allowing encoding an fid from an inode without an alias - Make sure fuse_dir_open() handles FOPEN_KEEP_CACHE. If it's not specified fuse needs to invaludate the directory inode page cache - Fix qnx6 so it builds with gcc-15 - Various fixes for netfslib and ceph and nfs filesystems: - Ignore silly rename files from afs and nfs when building header archives - Fix read result collection in netfslib with multiple subrequests - Handle ENOMEM for netfslib buffered reads - Fix oops in nfs_netfs_init_request() - Parse the secctx command immediately in cachefiles - Remove a redundant smp_rmb() in netfslib - Handle recursion in read retry in netfslib - Fix clearing of folio_queue - Fix missing cancellation of copy-to_cache when the cache for a file is temporarly disabled in netfslib - Sanity check the hfs root record - Fix zero padding data issues in concurrent write scenarios - Fix is_mnt_ns_file() after converting nsfs to path_from_stashed() - Fix missing declaration of init_files - Increase I/O priority when writing revoke records in jbd2 - Flush filesystem device before updating tail sequence in jbd2 * tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits) ovl: support encoding fid from inode with no alias ovl: pass realinode to ovl_encode_real_fh() instead of realdentry fuse: respect FOPEN_KEEP_CACHE on opendir netfs: Fix is-caching check in read-retry netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled netfs: Fix ceph copy to cache on write-begin netfs: Work around recursion by abandoning retry if nothing read netfs: Fix missing barriers by using clear_and_wake_up_bit() netfs: Remove redundant use of smp_rmb() cachefiles: Parse the "secctx" immediately nfs: Fix oops in nfs_netfs_init_request() when copying to cache netfs: Fix enomem handling in buffered reads netfs: Fix non-contiguous donation between completed reads kheaders: Ignore silly-rename files fs: relax assertions on failure to encode file handles fs: fix missing declaration of init_files fs: fix is_mnt_ns_file() iomap: fix zero padding data issue in concurrent append writes iomap: pass byte granular end position to iomap_add_to_ioend jbd2: flush filesystem device before updating tail sequence ...
2025-01-06btrfs: zlib: fix avail_in bytes for s390 zlib HW compression pathMikhail Zaslonko
Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops Fixes: fd1e75d0105d ("btrfs: make compression path to be subpage compatible") CC: stable@vger.kernel.org # 6.12+ Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06btrfs: zoned: calculate max_extent_size properly on non-zoned setupChristoph Hellwig
Since commit 559218d43ec9 ("block: pre-calculate max_zone_append_sectors"), queue_limits's max_zone_append_sectors is default to be 0 and it is only updated when there is a zoned device. So, we have lim->max_zone_append_sectors = 0 when there is no zoned device in the filesystem. That leads to fs_info->max_zone_append_size and thus fs_info->max_extent_size to be 0, which is wrong and can for example lead to a divide by zero in count_max_extents(). Fix this by only capping fs_info->max_extent_size to fs_info->max_zone_append_size when it is non-zero. Based on a patch from Naohiro Aota <naohiro.aota@wdc.com>, from which much of this commit message is stolen as well. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 559218d43ec9 ("block: pre-calculate max_zone_append_sectors") Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06btrfs: avoid NULL pointer dereference if no valid extent treeQu Wenruo
[BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport. Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/ Fixes: 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots") Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06Merge tag 'vfio-v6.13-rc7' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix a missed order alignment requirement of the pfn when inserting mappings through the new huge fault handler introduced in v6.12 (Alex Williamson) * tag 'vfio-v6.13-rc7' of https://github.com/awilliam/linux-vfio: vfio/pci: Fallback huge faults for unaligned pfn
2025-01-06Merge patch series "Fix encoding overlayfs fid for fanotify delete events"Christian Brauner
Amir Goldstein <amir73il@gmail.com> says: This is a followup fix to the reported regression [1] that was introduced by overlayfs non-decodable file handles support in v6.6. The first fix posted two weeks ago [2] was a quick band aid which is justified on its own and is still queued on your vfs.fixes branch. This followup fix fixes the root cause of overlayfs file handle encoding failure and it also solves a bug with fanotify FAN_DELETE_SELF events on overlayfs, that was discovered from analysis of the first report. The fix to fanotify delete events was verified with a new LTP test [3]. [1] https://lore.kernel.org/linux-fsdevel/CAOQ4uxiie81voLZZi2zXS1BziXZCM24nXqPAxbu8kxXCUWdwOg@mail.gmail.com/ [2] https://lore.kernel.org/linux-fsdevel/20241219115301.465396-1-amir73il@gmail.com/ [3] https://github.com/amir73il/ltp/commits/ovl_encode_fid/ * patches from https://lore.kernel.org/r/20250105162404.357058-1-amir73il@gmail.com: ovl: support encoding fid from inode with no alias ovl: pass realinode to ovl_encode_real_fh() instead of realdentry Link: https://lore.kernel.org/r/20250105162404.357058-1-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06ovl: support encoding fid from inode with no aliasAmir Goldstein
Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events. Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Reported-by: Dmitry Safonov <dima@arista.com> Closes: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiie81voLZZi2zXS1BziXZCM24nXqPAxbu8kxXCUWdwOg@mail.gmail.com/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250105162404.357058-3-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06ovl: pass realinode to ovl_encode_real_fh() instead of realdentryAmir Goldstein
We want to be able to encode an fid from an inode with no alias. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250105162404.357058-2-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06Merge tag 'exfat-for-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: "All fixes are for issues reported by syzbot: - Fix wrong error return in exfat_find_empty_entry() - Fix a endless loop by self-linked chain - fix a KMSAN uninit-value issue in exfat_extend_valid_size()" * tag 'exfat-for-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix the infinite loop in __exfat_free_cluster() exfat: fix the new buffer was not zeroed before writing exfat: fix the infinite loop in exfat_readdir() exfat: fix exfat_find_empty_entry() not returning error on failure
2025-01-06Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"Linus Torvalds
This reverts commit adcfb264c3ed51fbbf5068ddf10d309a63683868. It turns out this just causes a different warning splat instead that seems to be much easier to trigger, so let's revert ASAP. Reported-and-bisected-by: Borislav Petkov <bp@alien8.de> Tested-by: Breno Leitao <leitao@debian.org> Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/all/20250106131817.GAZ3vYGVr3-hWFFPLj@fat_crate.local/ Cc: Koichiro Den <koichiro.den@canonical.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-01-06ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noiseZhang Yi
We modify the value of ES8326_ANA_MICBIAS to reduce the pop noise Signed-off-by: Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20241230032752.108298-1-zhangyi@everest-semi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-06regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATORManivannan Sadhasivam
Since these are hidden inside CONFIG_REGULATOR, building the consumer drivers without CONFIG_REGULATOR will result in the following build error: >> drivers/pci/pwrctrl/slot.c:39:15: error: implicit declaration of function 'of_regulator_bulk_get_all'; did you mean 'regulator_bulk_get'? [-Werror=implicit-function-declaration] 39 | ret = of_regulator_bulk_get_all(dev, dev_of_node(dev), | ^~~~~~~~~~~~~~~~~~~~~~~~~ | regulator_bulk_get cc1: some warnings being treated as errors This also removes the duplicated definitions that were possibly added to fix the build issues. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501020407.HmQQQKa0-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250104115058.19216-3-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-06regulator: Guard of_regulator_bulk_get_all() with CONFIG_OFManivannan Sadhasivam
Since the definition is in drivers/regulator/of_regulator.c and compiled only if CONFIG_OF is enabled, building the consumer driver without CONFIG_OF and with CONFIG_REGULATOR will result in below build error: ERROR: modpost: "of_regulator_bulk_get_all" [drivers/pci/pwrctrl/pci-pwrctl-slot.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412181640.12Iufkvd-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250104115058.19216-2-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-06btrfs: don't read from userspace twice in btrfs_uring_encoded_read()Mark Harmstone
If we return -EAGAIN the first time because we need to block, btrfs_uring_encoded_read() will get called twice. Take a copy of args, the iovs, and the iter the first time, as by the time we are called the second time these may have gone out of scope. Reported-by: Jens Axboe <axboe@kernel.dk> Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)") Signed-off-by: Mark Harmstone <maharmstone@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06io_uring: add io_uring_cmd_get_async_data helperMark Harmstone
Add a helper function in include/linux/io_uring/cmd.h to read the async_data pointer from a struct io_uring_cmd. Signed-off-by: Mark Harmstone <maharmstone@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06io_uring/cmd: add per-op data to struct io_uring_cmd_dataJens Axboe
In case an op handler for ->uring_cmd() needs stable storage for user data, it can allocate io_uring_cmd_data->op_data and use it for the duration of the request. When the request gets cleaned up, uring_cmd will free it automatically. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06io_uring/cmd: rename struct uring_cache to io_uring_cmd_dataJens Axboe
In preparation for making this more generically available for ->uring_cmd() usage that needs stable command data, rename it and move it to io_uring/cmd.h instead. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06selftests/bpf: Extend netkit tests to validate set {head,tail}roomDaniel Borkmann
Extend the netkit selftests to specify and validate the {head,tail}room on the netdevice: # ./vmtest.sh -- ./test_progs -t netkit [...] ./test_progs -t netkit [ 1.174147] bpf_testmod: loading out-of-tree module taints kernel. [ 1.174585] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.422307] tsc: Refined TSC clocksource calibration: 3407.983 MHz [ 1.424511] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc3e5084, max_idle_ns: 440795359833 ns [ 1.428092] clocksource: Switched to clocksource tsc #363 tc_netkit_basic:OK #364 tc_netkit_device:OK #365 tc_netkit_multi_links:OK #366 tc_netkit_multi_opts:OK #367 tc_netkit_neigh_links:OK #368 tc_netkit_pkt_type:OK #369 tc_netkit_scrub:OK Summary: 7/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/bpf/20241220234658.490686-3-daniel@iogearbox.net
2025-01-06netkit: Add add netkit {head,tail}room to rt_link.yamlDaniel Borkmann
Add netkit {head,tail}room attribute support to the rt_link.yaml spec file. Example: # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifname": "nk0"}' --output-json | jq [...] "linkinfo": { "kind": "netkit", "data": { "primary": 0, "policy": "forward", "mode": "l3", "scrub": "default", "headroom": 0, "tailroom": 0, "peer-policy": "forward", "peer-scrub": "default" } }, [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/bpf/20241220234658.490686-2-daniel@iogearbox.net
2025-01-06netkit: Allow for configuring needed_{head,tail}roomDaniel Borkmann
Allow the user to configure needed_{head,tail}room for both netkit devices. The idea is similar to 163e529200af ("veth: implement ndo_set_rx_headroom") with the difference that the two parameters can be specified upon device creation. By default the current behavior stays as is which is needed_{head,tail}room is 0. In case of Cilium, for example, the netkit devices are not enslaved into a bridge or openvswitch device (rather, BPF-based redirection is used out of tcx), and as such these parameters are not propagated into the Pod's netns via peer device. Given Cilium can run in vxlan/geneve tunneling mode (needed_headroom) and/or be used in combination with WireGuard (needed_{head,tail}room), allow the Cilium CNI plugin to specify these two upon netkit device creation. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/bpf/20241220234658.490686-1-daniel@iogearbox.net
2025-01-05ksmbd: Remove unneeded if check in ksmbd_rdma_capable_netdev()Thorsten Blum
Remove the unnecessary if check and assign the result directly. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-05ksmbd: fix a missing return value check bugWentao Liang
In the smb2_send_interim_resp(), if ksmbd_alloc_work_struct() fails to allocate a node, it returns a NULL pointer to the in_work pointer. This can lead to an illegal memory write of in_work->response_buf when allocate_interim_rsp_buf() attempts to perform a kzalloc() on it. To address this issue, incorporating a check for the return value of ksmbd_alloc_work_struct() ensures that the function returns immediately upon allocation failure, thereby preventing the aforementioned illegal memory access. Fixes: 041bba4414cd ("ksmbd: fix wrong interim response on compound") Signed-off-by: Wentao Liang <liangwentao@iscas.ac.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-05Linux 6.13-rc6Linus Torvalds
2025-01-05Merge tag 'kbuild-fixes-v6.13-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix escaping of '$' in scripts/mksysmap - Fix a modpost crash observed with the latest binutils - Fix 'provides' in the linux-api-headers pacman package * tag 'kbuild-fixes-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: pacman-pkg: provide versioned linux-api-headers package modpost: work around unaligned data access error modpost: refactor do_vmbus_entry() modpost: fix the missed iteration for the max bit in do_input() scripts/mksysmap: Fix escape chars '$'
2025-01-05Merge tag 'mm-hotfixes-stable-2025-01-04-18-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "25 hotfixes. 16 are cc:stable. 18 are MM and 7 are non-MM. The usual bunch of singletons and two doubletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2025-01-04-18-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits) MAINTAINERS: change Arınç _NAL's name and email address scripts/sorttable: fix orc_sort_cmp() to maintain symmetry and transitivity mm/util: make memdup_user_nul() similar to memdup_user() mm, madvise: fix potential workingset node list_lru leaks mm/damon/core: fix ignored quota goals and filters of newly committed schemes mm/damon/core: fix new damon_target objects leaks on damon_commit_targets() mm/list_lru: fix false warning of negative counter vmstat: disable vmstat_work on vmstat_cpu_down_prep() mm: shmem: fix the update of 'shmem_falloc->nr_unswapped' mm: shmem: fix incorrect index alignment for within_size policy percpu: remove intermediate variable in PERCPU_PTR() mm: zswap: fix race between [de]compression and CPU hotunplug ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv fs/proc/task_mmu: fix pagemap flags with PMD THP entries on 32bit kcov: mark in_softirq_really() as __always_inline docs: mm: fix the incorrect 'FileHugeMapped' field mailmap: modify the entry for Mathieu Othacehe mm/kmemleak: fix sleeping function called from invalid context at print message mm: hugetlb: independent PMD page table shared count maple_tree: reload mas before the second call for mas_empty_area ...
2025-01-05Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A randconfig build fix and a performance fix: - Fix the CONFIG_RESET_CONTROLLER=n path signature of clk_imx8mp_audiomix_reset_controller_register() to appease randconfig - Speed up the sdhci clk on TH1520 by a factor of 4 by adding a fixed factor clk" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: clk-imx8mp-audiomix: fix function signature clk: thead: Fix TH1520 emmc and shdci clock rate
2025-01-05netfilter: xt_hashlimit: htable_selective_cleanup() optimizationEric Dumazet
I have seen syzbot reports hinting at xt_hashlimit abuse: [ 105.783066][ T4331] xt_hashlimit: max too large, truncated to 1048576 [ 105.811405][ T4331] xt_hashlimit: size too large, truncated to 1048576 And worker threads using up to 1 second per htable_selective_cleanup() invocation. [ 269.734496][ C1] [<ffffffff81547180>] ? __local_bh_enable_ip+0x1a0/0x1a0 [ 269.734513][ C1] [<ffffffff817d75d0>] ? lockdep_hardirqs_on_prepare+0x740/0x740 [ 269.734533][ C1] [<ffffffff852e71ff>] ? htable_selective_cleanup+0x25f/0x310 [ 269.734549][ C1] [<ffffffff817dcd30>] ? __lock_acquire+0x2060/0x2060 [ 269.734567][ C1] [<ffffffff817f058a>] ? do_raw_spin_lock+0x14a/0x370 [ 269.734583][ C1] [<ffffffff852e71ff>] ? htable_selective_cleanup+0x25f/0x310 [ 269.734599][ C1] [<ffffffff81547147>] __local_bh_enable_ip+0x167/0x1a0 [ 269.734616][ C1] [<ffffffff81546fe0>] ? _local_bh_enable+0xa0/0xa0 [ 269.734634][ C1] [<ffffffff852e71ff>] ? htable_selective_cleanup+0x25f/0x310 [ 269.734651][ C1] [<ffffffff852e71ff>] htable_selective_cleanup+0x25f/0x310 [ 269.734670][ C1] [<ffffffff815b3cc9>] ? process_one_work+0x7a9/0x1170 [ 269.734685][ C1] [<ffffffff852e57db>] htable_gc+0x1b/0xa0 [ 269.734700][ C1] [<ffffffff815b3cc9>] ? process_one_work+0x7a9/0x1170 [ 269.734714][ C1] [<ffffffff815b3dc9>] process_one_work+0x8a9/0x1170 [ 269.734733][ C1] [<ffffffff815b3520>] ? worker_detach_from_pool+0x260/0x260 [ 269.734749][ C1] [<ffffffff810201c7>] ? _raw_spin_lock_irq+0xb7/0xf0 [ 269.734763][ C1] [<ffffffff81020110>] ? _raw_spin_lock_irqsave+0x100/0x100 [ 269.734777][ C1] [<ffffffff8159d3df>] ? wq_worker_sleeping+0x5f/0x270 [ 269.734800][ C1] [<ffffffff815b53c7>] worker_thread+0xa47/0x1200 [ 269.734815][ C1] [<ffffffff81020010>] ? _raw_spin_lock+0x40/0x40 [ 269.734835][ C1] [<ffffffff815c9f2a>] kthread+0x25a/0x2e0 [ 269.734853][ C1] [<ffffffff815b4980>] ? worker_clr_flags+0x190/0x190 [ 269.734866][ C1] [<ffffffff815c9cd0>] ? kthread_blkcg+0xd0/0xd0 [ 269.734885][ C1] [<ffffffff81027b1a>] ret_from_fork+0x3a/0x50 We can skip over empty buckets, avoiding the lockdep penalty for debug kernels, and avoid atomic operations on non debug ones. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-05ipvs: speed up reads from ip_vs_conn proc fileFlorian Westphal
Reading is very slow because ->start() performs a linear re-scan of the entire hash table until it finds the successor to the last dumped element. The current implementation uses 'pos' as the 'number of elements to skip, then does linear iteration until it has skipped 'pos' entries. Store the last bucket and the number of elements to skip in that bucket instead, so we can resume from bucket b directly. before this patch, its possible to read ~35k entries in one second, but each read() gets slower as the number of entries to skip grows: time timeout 60 cat /proc/net/ip_vs_conn > /tmp/all; wc -l /tmp/all real 1m0.007s user 0m0.003s sys 0m59.956s 140386 /tmp/all Only ~100k more got read in remaining the remaining 59s, and did not get nowhere near the 1m entries that are stored at the time. after this patch, dump completes very quickly: time cat /proc/net/ip_vs_conn > /tmp/all; wc -l /tmp/all real 0m2.286s user 0m0.004s sys 0m2.281s 1000001 /tmp/all Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-05kbuild: pacman-pkg: provide versioned linux-api-headers packageThomas Weißschuh
The Arch Linux glibc package contains a versioned dependency on "linux-api-headers". If the linux-api-headers package provided by pacman-pkg does not specify an explicit version this dependency is not satisfied. Fix the dependency by providing an explicit version. Fixes: c8578539deba ("kbuild: add script and target to generate pacman package") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 07:18:30 +0000