| Age | Commit message (Collapse) | Author |
|---|
|
Changing the casefold option requires extra checks/work - factor out a
helper from bch2_fileattr_set() for the xattr code to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Christian Marangi says:
====================
net: phy: Add support for new Aeonsemi PHYs
Add support for new Aeonsemi 10G C45 PHYs. These PHYs intergate an IPC
to setup some configuration and require special handling to sync with
the parity bit. The parity bit is a way the IPC use to follow correct
order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7500
before the firmware is loaded.
The big special thing about this PHY is that it does provide
a generic PHY ID in C45 register that change to the correct one
one the firmware is loaded.
In practice:
- MMD 0x7 ID 0x7500 0x9410 -> FW LOAD -> ID 0x7500 0x9422
To handle this, we operate on .match_phy_device where
we check the PHY ID, if the ID match the generic one,
we load the firmware and we return 0 (PHY driver doesn't
match). Then PHY core will try the next PHY driver in the list
and this time the PHY is correctly filled in and we register
for it.
To help in the matching and not modify part of the PHY device
struct, .match_phy_device is extended to provide also the
current phy_driver is trying to match for. This add the
extra benefits that some other PHY can simplify their
.match_phy_device OP.
====================
Link: https://patch.msgid.link/20250517201353.5137-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.
They all support up to 5 LEDs with various HW mode supported.
While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.
For reference here the AS21xxx PHY name logic:
AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID
with new variant for macsec and no_macsec PHYs.
Also make use of PHY_ID_MATCH_MODEL macro and drop PHY_ID_MASK define to
introduce phy_id and phy_id_mask again in phy_driver struct.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a log should be printed as info level, not error level.
Fixes: 9bfd65980f8d ("net: libwx: Add sriov api for wangxun nics")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/67409DB57B87E2F0+20250519063357.21164-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
There are some bugfix for hibmcge driver
v1: https://lore.kernel.org/20250430093127.2400813-1-shaojijie@huawei.com
====================
Link: https://patch.msgid.link/20250517095828.1763126-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e79 ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use min() instead of min_t() to avoid the possibility of casting to the
wrong type.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250520042031.9297-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Biggers says:
====================
net: faster and simpler CRC32C computation
Update networking code that computes the CRC32C of packets to just call
crc32c() without unnecessary abstraction layers. The result is faster
and simpler code.
Patches 1-7 add skb_crc32c() and remove the overly-abstracted and
inefficient __skb_checksum().
Patches 8-10 replace skb_copy_and_hash_datagram_iter() with
skb_copy_and_crc32c_datagram_iter(), eliminating the unnecessary use of
the crypto layer. This unblocks the conversion of nvme-tcp to call
crc32c() directly instead of using the crypto layer, which patch 9 does.
v1: https://lore.kernel.org/20250511004110.145171-1-ebiggers@kernel.org
====================
Link: https://patch.msgid.link/20250519175012.36581-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that skb_copy_and_hash_datagram_iter() is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-11-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations and there also now exists a function
skb_copy_and_crc32c_datagram_iter(), it is unnecessary to go through the
crypto_ahash API. Just use those functions. This is much simpler, and
it also improves performance due to eliminating the crypto API overhead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-10-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since skb_copy_and_hash_datagram_iter() is used only with CRC32C, the
crypto_ahash abstraction provides no value. Add
skb_copy_and_crc32c_datagram_iter() which just calls crc32c() directly.
This is faster and simpler. It also doesn't have the weird dependency
issue where skb_copy_and_hash_datagram_iter() depends on
CONFIG_CRYPTO_HASH=y without that being expressed explicitly in the
kconfig (presumably because it was too heavyweight for NET to select).
The new function is conditional on the hidden boolean symbol NET_CRC32C,
which selects CRC32. So it gets compiled only when something that
actually needs CRC32C packet checksums is enabled, it has no implicit
dependency, and it doesn't depend on the heavyweight crypto layer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-9-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
crc32c_combine() and crc32c_shift() are no longer used (except by the
KUnit test that tests them), and their current implementation is very
slow. Remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-8-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Acked-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add skb_crc32c(), which calculates the CRC32C of a sk_buff. It will
replace __skb_checksum(), which unnecessarily supports arbitrary
checksums. Compared to __skb_checksum(), skb_crc32c():
- Uses the correct type for CRC32C values (u32, not __wsum).
- Does not require the caller to provide a skb_checksum_ops struct.
- Is faster because it does not use indirect calls and does not use
the very slow crc32c_combine().
According to commit 2817a336d4d5 ("net: skb_checksum: allow custom
update/combine for walking skb") which added __skb_checksum(), the
original motivation for the abstraction layer was to avoid code
duplication for CRC32C and other checksums in the future. However:
- No additional checksums showed up after CRC32C. __skb_checksum()
is only used with the "regular" net checksum and CRC32C.
- Indirect calls are expensive. Commit 2544af0344ba ("net: avoid
indirect calls in L4 checksum calculation") worked around this
using the INDIRECT_CALL_1 macro. But that only avoided the indirect
call for the net checksum, and at the cost of an extra branch.
- The checksums use different types (__wsum and u32), causing casts
to be needed.
- It made the checksums of fragments be combined (rather than
chained) for both checksums, despite this being highly
counterproductive for CRC32C due to how slow crc32c_combine() is.
This can clearly be seen in commit 4c2f24549644 ("sctp: linearize
early if it's not GSO") which tried to work around this performance
bug. With a dedicated function for each checksum, we can instead
just use the proper strategy for each checksum.
As shown by the following tables, the new function skb_crc32c() is
faster than __skb_checksum(), with the improvement varying greatly from
5% to 2500% depending on the case. The largest improvements come from
fragmented packets, mainly due to eliminating the inefficient
crc32c_combine(). But linear packets are improved too, especially
shorter ones, mainly due to eliminating indirect calls. These
benchmarks were done on AMD Zen 5. On that CPU, Linux uses IBRS instead
of retpoline; an even greater improvement might be seen with retpoline:
Linear sk_buffs
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 43 18
256 94 77
1420 204 161
16384 1735 1642
Nonlinear sk_buffs (even split between head and one fragment)
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 579 22
256 829 77
1420 1506 194
16384 4365 1682
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a hidden kconfig symbol NET_CRC32C that will group together the
functions that calculate CRC32C checksums of packets, so that these
don't have to be built into NET-enabled kernels that don't need them.
Make skb_crc32c_csum_help() (which is called only when IP_SCTP is
enabled) conditional on this symbol, and make IP_SCTP select it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
tools: ynl-gen: add support for "inherited" selector and therefore TC
Add C codegen support for constructs needed by TC, namely passing
sub-message selector from a lower nest, and sub-messages with
fixed headers.
====================
Link: https://patch.msgid.link/20250520161916.413298-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm Arm64 DeviceTree updates for v6.16
Support for CPU frequency scaling is enabled on the X Elite platform.
Also on X Elite, support for the HP EliteBook Ultra G1q is introduced.
Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added.
PCIe controllers and PHYs are described and enabled across IPQ5018,
IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is
added. The TCSR block is described and used to enable download mode
flags on IPQ5018.
The venus video encoder/decoder is enabled on the MSM8998-based Lenovo
Miix 630 laptop.
The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled
on the QCM2210-based RB1 board.
The Fairphone FP5 gains Displayport sound support.
SAR2130P display nodes are added.
On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is
enabled on Lenovo Thinkpad X13s and the CRD.
The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial
sound support.
On SDX75 the QPIC BAM and NAND support is added, and these are enabled
on the IDP board.
LLCC is added for SM8750. SM8550 gains Iris video decoder support.
For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well
as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support,
Microsoft Surface Laptop 7 models gets support for DP over USB Type-C,
HP Omnibook X 14 gains audio support. The devkit gets the USB multiport
controller and the two USB Type-A ports described.
Additionally a variety of Devicetree fixes are introduced, primarily
identified through binding validation.
* tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits)
arm64: dts: qcom: sm4450: Add RPMh power domains support
arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support
arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers
arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes
arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent
arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC BAM support
arm64: dts: qcom: qcm2290: Add crypto engine
arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
arm64: dts: qcom: qcs615: Fix up UFS clocks
arm64: dts: qcom: sa8775p: Clean up the PSCI PDs
arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX
arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators
arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply
arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node
arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument
...
Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Arm32 DeviceTree updates for v6.16
This adds missing LVDS clocks to APQ8064 display controller. The unused HDMI HPD
gpio on ifc6410 is dropped (chip uses pinmuxed hpd function).
Missing timer clocks are added to MSM8960 to address bindings warning.
* tag 'qcom-arm32-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064-ifc6410: drop HDMI HPD GPIO
ARM: dts: qcom: apq8064: link LVDS clocks
ARM: dts: qcom-msm8960: add missing clocks to the timer node
Link: https://lore.kernel.org/r/20250520024716.39418-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
RK3036 usbphy addition and two Sonoff iHost adjustments.
* tag 'v6.16-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin
ARM: dts: rockchip: Sonoff-iHost: correct IO domain voltages
ARM: dts: rockchip: Sonoff-iHost: adjust SDIO for stability
Link: https://lore.kernel.org/r/3652020.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Power-domains needed for stability, dropping of unnecessary assigned-clocks
(handled by cpufreq) and fixes for dtc W=1 warnings.
* tag 'v6.16-rockchip-dts64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Link: https://lore.kernel.org/r/4798229.ejJDZkT8p0@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.16 (part 1)
Clean up unused pinctrl-names in pca9555 nodes
* tag 'mvebu-dt64-6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Drop unused "pinctrl-names"
Link: https://lore.kernel.org/r/87tt5kpqy9.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take four)
- Fix White Hawk ARD Audio breakage.
* tag 'renesas-dts-for-v6.16-tag4' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groups
Link: https://lore.kernel.org/r/cover.1747817851.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take three)
- Silence a DTC warning,
- Add an extra compatible value to avoid future issues.
* tag 'renesas-dts-for-v6.16-tag3' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
riscv: dts: renesas: Add specific RZ/Five cache compatible
arm64: dts: renesas: sparrow-hawk: Disable dtc spi_bus_bridge check
Link: https://lore.kernel.org/r/cover.1747399860.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.16
Starfive:
All Starfive this time (again), enabling the usb3 port on the framework
laptop mainboard, and a few cleanup patches that are syncing things with
the dts used by U-Boot.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: jh7110-common: bootph-pre-ram hinting needed by boot loader
riscv: dts: starfive: jh7110-common: add eeprom node to i2c5
riscv: dts: starfive: jh7110-common: qspi flash setting read-delay 2 cycles max 100MHz
riscv: dts: starfive: jh7110-common: add CPU BUS PERH QSPI clocks to syscrg
riscv: dts: starfive: jh7110-common: use macros for MMC0 pins
riscv: dts: starfive: fml13v01: enable USB 3.0 port
Link: https://lore.kernel.org/r/20250516-gap-exploring-f8f516ab4e1c@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for v6.16
This update includes:
- fix CPU node "enable-method" property dependencies
* tag 'microchip-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies
Link: https://lore.kernel.org/r/20250516055607.11248-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.16
This update includes:
- more controllers enabled for SAMA7D65 SoC (Ethernet, Flexcoms,
SRAM, DRAM, RTC, RTT, GBPR)
- cleanups and fixes for Calao boards
* tag 'at91-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g54_curiosity: Add fixed-partitions for spi-nor flash
ARM: dts: microchip: sama7d65: Add RTT timer to curiosity board
ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65 SoC
ARM: dts: microchip: sama7d65: Add SRAM and DRAM components support
ARM: dts: microchip: sama7d65_curiosity: add EEPROM
ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosity
ARM: dts: microchip: sama7d65: Enable GMAC interface
ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC
ARM: dts: microchip: sama7d65: Add gmac interfaces for sama7d65 SoC
ARM: dts: at91: at91sam9263: fix NAND chip selects
ARM: dts: at91: usb_a9g20: move wrong RTC node
ARM: dts: at91: calao_usb: simplify chosen node
ARM: dts: at91: usb_a9260: use 'stdout-path'
ARM: dts: at91: calao_usb: simplify memory node
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select
ARM: dts: at91: usb_a9g20: add SPI EEPROM
Link: https://lore.kernel.org/r/20250516055330.10852-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.16
Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1
Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.
Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100
Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)
Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)
Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6
* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...
Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.16
- Add clock driver, fix for pinctrl/uart
- Add gpio support, enable LED heartbeat
* tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: add gpio LED for system heartbeat
riscv: dts: spacemit: add gpio support for K1 SoC
riscv: dts: spacemit: Acquire clocks for UART
riscv: dts: spacemit: Acquire clocks for pinctrl
riscv: dts: spacemit: Add clock tree for SpacemiT K1
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.16
Introduce support for the AP8064-based LG Nexus 4. MSM8226 is extended
with modem-related features, the LTE-capable variant MSM8926 is
introduced, and modem support is enabled on Samsung Galaxy Tab 4.
Display-related clocks and power-domains are defined for the simple
framebuffer of Motorola Moto G, to allow booting without
clk_ignore_unused and pd_ignore_unused.
On MSM8960 SDCC BAM and thermal sensor (tsens) is introduced.
* tag 'qcom-arm32-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: move replicator out of soc node
ARM: dts: qcom: apq8064: use new compatible for SPS SIC device
ARM: dts: qcom: apq8064: use new compatible for SFPB device
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device
ARM: dts: qcom: apq8064: add missing clocks to the timer node
ARM: dts: qcom: apq8064-lg-nexus4-mako: Enable WiFi
ARM: dts: qcom: msm8226-motorola-falcon: specify vddio_disp output voltage
ARM: dts: qcom: msm8226-motorola-falcon: limit TPS65132 to 5.4V
ARM: dts: qcom: msm8226-motorola-falcon: add I2C clock frequencies
ARM: dts: qcom: msm8226-motorola-falcon: add clocks, power-domain to simpleFB
ARM: dts: qcom: ipq4019: Drop redundant CPU "clock-latency"
ARM: dts: qcom: sdx55/sdx65: Fix CPU power-domain-names
ARM: dts: qcom: msm8974: Use the header with DSI phy clock IDs
ARM: dts: qcom: msm8226: Use the header with DSI phy clock IDs
Link: https://lore.kernel.org/r/20250513214111.43401-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
VT8500 DTS ARM changes for v6.16
1. New board: VIA APC Rock/Paper.
2. Add SCC ID register/socinfo node.
3. List all timer interrupts.
* tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: list all four timer interrupts
ARM: dts: vt8500: add DT nodes for the system config ID register
ARM: dts: vt8500: Add VIA APC Rock/Paper board
dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards
Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.16
The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.
Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.
IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.
Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.
The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.
On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.
The MSM8953 platform gains another UART and interconnects.
On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.
Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.
The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.
Display and GPU are enabled for the Nothing Phone (1).
QCS615 platform gains command DB definition.
The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.
On SAR2130P PCIe EP device nodes are added.
On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.
The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.
On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.
On SM8450 the PCIe endpoint controller is described.
For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.
SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.
On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.
On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.
On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.
Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.
DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.
A couple of DWC3 quirks are added across a lot of platforms.
The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.
* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
arm64: dts: qcom: qcs8300: add the pcie smmu node
arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
arm64: dts: qcom: msm8953: Add interconnects
arm64: dts: qcom: msm8953: Add uart_5
arm64: dts: qcom: sm8350: Use q6asm defines for reg
arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
arm64: dts: qcom: sdm850*: Use q6asm defines for reg
arm64: dts: qcom: sdm845*: Use q6asm defines for reg
arm64: dts: qcom: sc7280: Use q6asm defines for reg
arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
arm64: dts: qcom: msm8996*: Use q6asm defines for reg
arm64: dts: qcom: msm8953: Use q6asm defines for reg
arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
...
Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
Nuvoton ARM devicetree updates for v6.16
- MMC, OHCI, UDC and EDAC blocks added to the NPCM7XX DTSI
- Fixes for GPIO hog names in the NPCM730 and RunBMC Olympus platforms
* tag 'nuvoton-arm-6.16-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: nuvoton: Add MMC Nodes
ARM: dts: nuvoton: Add OHCI node
ARM: dts: nuvoton: Add UDC nodes
ARM: dts: nuvoton: Add EDAC node
ARM: dts: nuvoton: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/CACPK8Xe=f_hNNWUGL670x4-OeKgDB+2P+mxp5BaTLW==T5jE_A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 6.15 (part 1)
Fix uDPU board LEDs by correcting pinctrl state
* tag 'mvebu-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Link: https://lore.kernel.org/r/87wmagpr0a.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.15
Only one fix:
Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using
Allwinner's proprietary bus ended up causing issues when the PMIC was
sharing the bus with other devices.
* tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
Link: https://lore.kernel.org/r/aCaeLgjZllV7bauX@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from
user"), the CRYPTO_CHACHA20_NEON option is no longer selected by default
due to changes in how crypto library options are exposed and selected.
To restore the previous behavior and ensure CRYPTO_CHACHA20_NEON is
enabled, explicitly select CONFIG_CRYPTO_CHACHA20 in the defconfig. This
pulls in CRYPTO_LIB_CHACHA_INTERNAL and allows CRYPTO_CHACHA20_NEON to be
selected automatically as before.
Fixes: 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from user")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.16
Allow HP EliteBook Ultra G1q to use QSSECOM for UEFI variable acecss.
Add missing compatible for IPQ5018 TCSR block. Fix a kernel-doc warning
in SCM driver.
* tag 'qcom-drivers-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
docs: firmware: qcom_scm: Fix kernel-doc warning
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
Link: https://lore.kernel.org/r/20250520024916.39712-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V cache drivers for v6.16
SiFive:
Add support for the Eswin EIC7700 SoC, which needs to make sure of the
non-standard cache-ops provided by the ccache driver.
Bindings:
Conversions for two Marvell bindings to yaml, and additions of two
soc-specific compatibles to the axm45mp bindings.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: cache: add QiLai compatible to ax45mp
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
dt-bindings: cache: add specific RZ/Five compatible to ax45mp
cache: sifive_ccache: Add ESWIN EIC7700 support
dt-bindings: cache: sifive,ccache0: Add ESWIN EIC7700 SoC compatibility
Link: https://lore.kernel.org/r/20250516-liability-facility-667fc14a2a85@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.16, part two
Few fixes for STM32 Octo Memory Manager driver introduced for the same
cycle in few commits before. These fixes were reported only after wider
coverage by bots through linux-next exposure.
* tag 'memory-controller-drv-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
memory: stm32_omm: Fix NULL vs IS_ERR() check in probe()
memory: stm32_omm: Fix error handling in stm32_omm_configure()
memory: stm32: Fix spelling mistake "resset" -> "reset"
Link: https://lore.kernel.org/r/20250516082415.7871-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
