summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-24arch/tile: make glibc's sysconf(_SC_NPROCESSORS_CONF) work correctlyChris Metcalf
glibc assumes that it can count /sys/devices/system/cpu/cpu* to get the number of configured cpus. For this to be valid on tile, we need to generate a "cpu" entry for all cpus, including the ones that are not currently allocated for Linux's use. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24Merge branch 'master' into for-linusChris Metcalf
2010-11-24pci root complex: support for tile architectureChris Metcalf
This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The <asm/io.h> header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky <asm/pci-bridge.h> header was rolled into the <asm/pci.h> header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24drivers/net/tile/: on-chip network drivers for the tile architectureChris Metcalf
This change adds the first network driver for the tile architecture, supporting the on-chip XGBE and GBE shims. The infrastructure is present for the TILE-Gx networking drivers (another three source files in the new directory) but for now the the actual tilegx sources are waiting on releasing hardware to initial customers. Note that arch/tile/include/hv/* are "upstream" headers from the Tilera hypervisor and will probably benefit less from LKML review. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliableChris Wilson
Commit d09c23de intended to add a 30ms delay to give the ADD time to detect any TVs connected. However, it used the sdvo->is_tv flag to do so which is dependent upon the previous detection result and not whether the output supports TVs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-11-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-24af_unix: limit unix_tot_inflightEric Dumazet
Vegard Nossum found a unix socket OOM was possible, posting an exploit program. My analysis is we can eat all LOWMEM memory before unix_gc() being called from unix_release_sock(). Moreover, the thread blocked in unix_gc() can consume huge amount of time to perform cleanup because of huge working set. One way to handle this is to have a sensible limit on unix_tot_inflight, tested from wait_for_unix_gc() and to force a call to unix_gc() if this limit is hit. This solves the OOM and also reduce overall latencies, and should not slowdown normal workloads. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-24xen: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/x86/xen/setup.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24xen: x86/32: perform initial startup on initial_page_tableIan Campbell
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-24ALSA: HDA: Add an extra DAC for Realtek ALC887-VDDavid Henningsson
The patch enables ALC887-VD to use the DAC at nid 0x26, which makes it possible to use this DAC for e g Headphone volume. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24ASoC: nuc900-ac97: fix a memory leakAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-24Merge branch 'fix/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.37
2010-11-24ASoC: Return proper error for omap3pandora_soc_initAxel Lin
Return PTR_ERR(omap3pandora_dac_reg) instead of 0 if regulator_get failed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-24ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000Axel Lin
MCLKDIV bit of Register 04h Clocking1: 0 : Divide by 1 1 : Divide by 2 Thus in the case of freq <= 16500000, we should clear MCLKDIV bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-11-24ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal modeAxel Lin
DACSLOPE bit of Register 06h ADC and DAC Control 2: 0: Normal mode 1: Sloping stop-band mode Thus in the case of normal mode, we should clear DACSLOPE bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-11-24MAINTAINERS: INTEL DRM DRIVERS list (intel-gfx) is subscribers-onlyJoe Perches
Mark it so. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-24Merge branch 'rmobile/fsi-despair' into rmobile-fixes-for-linusPaul Mundt
2010-11-24sisfb: delete osdef.hAaro Koskinen
The file is not needed. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: move the CONFIG warning to sis_main.cAaro Koskinen
sis_main.c is always compiled, so we can check Kconfig options there. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: replace SiS_SetMemory with memset_ioAaro Koskinen
Get rid of one more wrapper. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: remove InPort/OutPort wrappersAaro Koskinen
Remove register IO wrappers. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315HAaro Koskinen
There is no need to alias CONFIG #defines. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete redudant #define SIS_LINUX_KERNELAaro Koskinen
It's not needed anymore with SIS_XORG_XF86 gone. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete dead SIS_XORG_XF86 codeAaro Koskinen
Delete code for compiling the driver for X.org/XFree86. The development has forked, so there is no point keeping this code in the tree. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete fallback code for pci_map_rom()Aaro Koskinen
If pci_map_rom() fails, there is some fallback code that basically duplicates pci_map_rom() on non-x86 platforms. No point in that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete obsolete PCI ROM bug workaroundAaro Koskinen
Delete a workaround for a PCI ROM bug that has been fixed ages ago by the commit 761a3ac08c63718dacde12aaf0ec6d6760e8c2b7. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.Kuninori Morimoto
The PLLC2 clock was utilizing the same sort of enable/disable without regard to usecount approach that the FSIDIV clock was when being used as a PLL pass-through. This forces the enable/disable through the clock framework, which now prevents the clock from being ripped out or modified underneath users that have an existing handle on it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocksKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: clock-sh7372: modify error codeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642Kuninori Morimoto
Current AP4 FSI didn't use set_rate for ak4642, and used dummy rate when init. And FSI driver was modified to always call set_rate. The user which are using FSI set_rate is only AP4 now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMIKuninori Morimoto
Current AP4 FSI set_rate function used bogus clock process which didn't care enable/disable and clk->usecound. To solve this issue, this patch also modify FSI driver to call set_rate with enough options. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disableKuninori Morimoto
Current FSIDIV clock framework had bogus disable. This patch remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24md: Call blk_queue_flush() to establish flush/fua supportDarrick J. Wong
Before 2.6.37, the md layer had a mechanism for catching I/Os with the barrier flag set, and translating the barrier into barriers for all the underlying devices. With 2.6.37, I/O barriers have become plain old flushes, and the md code was updated to reflect this. However, one piece was left out -- the md layer does not tell the block layer that it supports flushes or FUA access at all, which results in md silently dropping flush requests. Since the support already seems there, just add this one piece of bookkeeping. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-11-24md/raid1: really fix recovery looping when single good device fails.NeilBrown
Commit 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 supposedly fixed a problem where if a raid1 with just one good device gets a read-error during recovery, the recovery would abort and immediately restart in an infinite loop. However it depended on raid1_remove_disk removing the spare device from the array. But that does not happen in this case. So add a test so that in the 'recovery_disabled' case, the device will be removed. This suitable for any kernel since 2.6.29 which is when recovery_disabled was introduced. Cc: stable@kernel.org Reported-by: Sebastian Färber <faerber@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-11-24md: fix return value of rdev_size_change()Justin Maggard
When trying to grow an array by enlarging component devices, rdev_size_store() expects the return value of rdev_size_change() to be in sectors, but the actual value is returned in KBs. This functionality was broken by commit dd8ac336c13fd8afdb082ebacb1cddd5cf727889 so this patch is suitable for any kernel since 2.6.30. Cc: stable@kernel.org Signed-off-by: Justin Maggard <jmaggard10@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-11-24ALSA: hda - Fix Acer 7730G supportDenis Kuplyakov
Fixes automatic EAPD configuration on Acer 7730G laptop. Signed-off-by: Denis Kuplyakov <dener.kup@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24ALSA: support module on-demand loading for seq and timerKay Sievers
If CONFIG_SND_DYNAMIC_MINORS is used, assign /dev/snd/seq and /dev/snd/timer the usual static minors, and export specific module aliases to generate udev module on-demand loading instructions: $ cat /lib/modules/2.6.33.4-smp/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 uinput uinput c10:223 dm_mod mapper/control c10:236 snd_timer snd/timer c116:33 snd_seq snd/seq c116:1 The last two lines instruct udev to create device nodes, even when the modules are not loaded at that time. As soon as userspace accesses any of these nodes, the in-kernel module-loader will load the module, and the device can be used. The header file minor calculation needed to be simplified to make __stringify() (supports only two indirections) in the MODULE_ALIAS macro work. This is part of systemd's effort to get rid of unconditional module load instructions and needless init scripts. Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24virtio: fix format of sysfs driver/vendor filesStephen Hemminger
The sysfs files for virtio produce the wrong format and are missing the required newline. The output for virtio bus vendor/device should have the same format as the corresponding entries for PCI devices. Although this technically changes the ABI for sysfs, these files were broken to start with! Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-11-24Char: virtio_console, fix memory leakJiri Slaby
Stanse found that in init_vqs, memory is leaked under certain circumstanses (the fail path order is incorrect). Fix that by checking allocations in one turn and free all of them at once if some fails (some may be NULL, but this is OK). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Amit Shah <amit.shah@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-11-24virtio: return correct capacity to usersMichael S. Tsirkin
We can't rely on indirect buffers for capacity calculations because they need a memory allocation which might fail. In particular, virtio_net can get into this situation under stress, and it drops packets and performs badly. So return the number of buffers we can guarantee users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reported-By: Krishna Kumar2 <krkumar2@in.ibm.com>
2010-11-24module: Update prototype for ref_module (formerly use_module)Anders Kaseorg
Commit 9bea7f23952d5948f8e5dfdff4de09bb9981fb5f renamed use_module to ref_module (and changed its return value), but forgot to update this prototype in module.h. Signed-off-by: Anders Kaseorg <andersk@ksplice.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-11-24nilfs2: fix typo in comment of nilfs_dat_move functionRyusuke Konishi
Fixes a typo: "uncommited" -> "uncommitted". Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-11-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (41 commits) ALSA: hda - Identify more variants for ALC269 ALSA: hda - Fix wrong ALC269 variant check ALSA: hda - Enable jack sense for Thinkpad Edge 11 ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same mux on IDT/STAC" ALSA: hda - Fixed ALC887-VD initial error ALSA: atmel - Fix the return value in error path ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J ALSA: snd-atmel-abdac: test wrong variable ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolons ALSA: sound/ppc: Use printf extension %pR for struct resource ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls ASoC: uda134x - set reg_cache_default to uda134x_reg ASoC: Add support for MAX98089 CODEC ASoC: davinci: fixes for multi-component ASoC: Fix register cache setup WM8994 for multi-component ASoC: Fix dapm_seq_compare() for multi-component ASoC: RX1950: Fix hw_params function ...
2010-11-24Merge branch 'upstream/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits) xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable Revert "xen/privcmd: create address space to allow writable mmaps" xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: implement XENMEM_machphys_mapping xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier ...
2010-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: of/phylib: Use device tree properties to initialize Marvell PHYs. phylib: Add support for Marvell 88E1149R devices. phylib: Use common page register definition for Marvell PHYs. qlge: Fix incorrect usage of module parameters and netdev msg level ipv6: fix missing in6_ifa_put in addrconf SuperH IrDA: correct Baud rate error correction atl1c: Fix hardware type check for enabling OTP CLK net: allow GFP_HIGHMEM in __vmalloc() bonding: change list contact to netdev@vger.kernel.org e1000: fix screaming IRQ
2010-11-24Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: EHCI: fix obscure race in ehci_endpoint_disable USB: gadget: AT91: fix typo in atmel_usba_udc driver USB: isp1362-hcd - fix section mismatch warning USB: EHCI: AMD periodic frame list table quirk USB: OTG: langwell_otg: fix up some sysfs attribute permissions USB: misc: usbsevseg: fix up some sysfs attribute permissions USB: misc: usbled: fix up some sysfs attribute permissions USB: misc: trancevibrator: fix up a sysfs attribute permission USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions USB: storage: sierra_ms: fix sysfs file attribute USB: ehci: fix debugfs 'lpm' permissions USB: atm: ueagle-atm: fix up some permissions on the sysfs files xhci: Fix command ring replay after resume. xHCI: fix wMaxPacketSize mask xHCI: release spinlock when setup interrupt xhci: Remove excessive printks with shared IRQs.
2010-11-23drm/i915/sdvo: Always fallback to querying the shared DDC lineChris Wilson
On a few devices, like the Mac Mini, the CRT DDC pins are shared between the analog connector and the digital connector. In this scenario, rely on the EDID to determine if a digital panel is connected to the digital connector. Reported-and-tested-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.contextMyungJoo Ham
init_mm used at kernel/sched.c:idle_task_exit() has spin_lock (init_mm.context.id_lock) that is not initialized when spin_lock/unlock is called at an ARM machine. Note that mm_struct.context.id_lock is usually initialized except for the instance of init_mm at linux/arch/arm/mm/context.c Not initializing this spinlock incurs "BUG: pinlock bad magic" warning when spinlock debug is enabled. We have observed such instances when testing PM in S5PC210 machines. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23ARM: avoid annoying <4>'s in printk outputRussell King
Adding KERN_WARNING in the middle of strings now produces those tokens in the output, rather than accepting the level as was once the case. Fix this in the one reported case. There might be more... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23SCSI: arm fas216: fix missing ';'Russell King
f281233 (SCSI host lock push-down) broke the fas216 build: drivers/scsi/arm/fas216.h: In function 'fas216_noqueue_command': drivers/scsi/arm/fas216.h:354: error: storage class specified for parameter 'fas216_intr' drivers/scsi/arm/fas216.h:356: error: storage class specified for parameter 'fas216_remove' ... Fix it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-12 14:57:00 +0000