| Age | Commit message (Collapse) | Author |
|---|
|
Pull bcachefs fixes from Kent Overstreet:
"User reported fixes:
- Fix btree node scan on encrypted filesystems by not using btree
node header fields encrypted
- Fix a race in btree write buffer flush; this caused EROs primarily
during fsck for some people"
* tag 'bcachefs-2025-07-24' of git://evilpiepirate.org/bcachefs:
bcachefs: Add missing snapshots_seen_add_inorder()
bcachefs: Fix write buffer flushing from open journal entry
bcachefs: btree_node_scan: don't re-read before initializing found_btree_node
|
|
This fixes an infinite loop when repairing "extent past end of inode",
when the extent is an older snapshot than the inode that needs repair.
Without the snaphsots_seen_add_inorder() we keep trying to delete the
same extent, even though it's no longer visible in the inode's snapshot.
Fixes: 63d6e9311999 ("bcachefs: bch2_fpunch_snapshot()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When flushing the btree write buffer, we pull write buffer keys directly
from the journal instead of letting the journal write path copy them to
the write buffer.
When flushing from the currently open journal buffer, we have to block
new reservations and wait for outstanding reservations to complete.
Recheck the reservation state after blocking new reservations:
previously, we were checking the reservation count from before calling
__journal_block().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
|
|
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au
Fixes: 39ced19b9e60 ("lib/vsprintf: split out sprintf() and friends")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com
Fixes: 7dab174e2e27 ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org
Fixes: 0e1c773b501f ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Create pwrctrl devices only when we need them, i.e., when
CONFIG_PCI_PWRCTRL is enabled.
This allows brcmstb to work around a pwrctrl regression by
disabling CONFIG_PCI_PWRCTRL (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Create pwrctrl devices only when CONFIG_PCI_PWRCTRL is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Some last-minute fixes. All changes are device-specific small fixes or
quirks, safe to apply"
* tag 'sound-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: mediatek: common: fix device and OF node leak
ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
ALSA: usb-audio: qcom: Adjust mutex unlock order
ASoC: SDCA: correct the calculation of the maximum init table size
ASoC: rt5650: Eliminate the high frequency glitch
ASoC: SOF: Intel: PTL: Add the sdw_process_wakeen op
ALSA: hda/realtek - Add mute LED support for HP Pavilion 15-eg0xxx
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa0xxx
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two important arm64 fixes ahead of the 6.16 release.
The first fixes a regression introduced during the merge window where
the KVM UUID (which is used to advertise KVM-specific hypercalls for
things like time synchronisation in the guest) was corrupted thanks to
an endianness bug introduced when converting the code to use the
UUID_INIT() helper.
The second fixes a stack-pointer corruption issue during
context-switch which has been observed in the wild when taking a
pseudo-NMI with shadow call stack enabled.
Summary:
- Fix broken UUID value for the KVM/arm64 hypervisor SMCCC interface
- Fix stack corruption on context-switch, primarily seen on (but not
limited to) configurations with both pNMI and SCS enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
arm64: kvm, smccc: Fix vendor uuid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and xfrm.
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth:
- mlx5: fix memory leak in cmd_exec()
- i40e: when removing VF MAC filters, avoid losing PF-set MAC
- gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth:
- ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- ism: fix concurrency management in ism_cmd()
- dpaa2: fix device reference count leak in MAC endpoint handling
- icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage"
* tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
net: hns3: default enable tx bounce buffer when smmu enabled
net: hns3: fixed vf get max channels bug
net: hns3: disable interrupt when ptp init failed
net: hns3: fix concurrent setting vlan filter issue
s390/ism: fix concurrency management in ism_cmd()
selftests: drv-net: wait for iperf client to stop sending
MAINTAINERS: Add in6.h to MAINTAINERS
selftests: netfilter: tone-down conntrack clash test
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
gve: Fix stuck TX queue for DQ queue format
net: appletalk: Fix use-after-free in AARP proxy probe
net: bcmasp: Restore programming of TX map vector register
selftests: mptcp: connect: also cover checksum
selftests: mptcp: connect: also cover alt modes
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-07-23
1) Premption fixes for xfrm_state_find.
From Sabrina Dubroca.
2) Initialize offload path also for SW IPsec GRO. This fixes a
performance regression on SW IPsec offload.
From Leon Romanovsky.
3) Fix IPsec UDP GRO for IKE packets.
From Tobias Brunner,
4) Fix transport header setting for IPcomp after decompressing.
From Fernando Fernandez Mancera.
5) Fix use-after-free when xfrmi_changelink tries to change
collect_md for a xfrm interface.
From Eyal Birger .
6) Delete the special IPcomp x->tunnel state along with the state x
to avoid refcount problems.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "xfrm: destroy xfrm_state synchronously on net exit path"
xfrm: delete x->tunnel as we delete x
xfrm: interface: fix use-after-free after changing collect_md xfrm interface
xfrm: ipcomp: adjust transport header after decompressing
xfrm: Set transport header to fix UDP GRO handling
xfrm: always initialize offload path
xfrm: state: use a consistent pcpu_id in xfrm_state_find
xfrm: state: initialize state_ptrs earlier in xfrm_state_find
====================
Link: https://patch.msgid.link/20250723075417.3432644-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
v1: https://lore.kernel.org/all/20250702130901.2879031-1-shaojijie@huawei.com/
====================
Link: https://patch.msgid.link/20250722125423.1270673-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the queried maximum of vf channels is the maximum of channels
supported by each TC. However, the actual maximum of channels is
the maximum of channels supported by the device.
Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When ptp init failed, we'd better disable the interrupt and clear the
flag, to avoid early report interrupt at next probe.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vport->req_vlan_fltr_en may be changed concurrently by function
hclge_sync_vlan_fltr_state() called in periodic work task and
function hclge_enable_vport_vlan_filter() called by user configuration.
It may cause the user configuration inoperative. Fixes it by protect
the vport->req_vlan_fltr by vport_lock.
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A few device specific fixes, none especially remarkable though all
useful.
|
|
Pull drm fixes from Dave Airlie:
"This might just be part one, but I'm sending it a bit early as it has
two sets of reverts for regressions, one is all the gem/dma-buf
handling and another was a nouveau ioctl change.
Otherwise there is an amdgpu fix, nouveau fix and a scheduler fix.
If any other changes come in I'll follow up with another more usual
Fri/Sat MR.
gem:
- revert all the dma-buf/gem changes as there as lifetime issues
with them
nouveau:
- revert an ioctl change as it causes issues
- fix NULL ptr on fermi
bridge:
- remove extra semicolon
sched:
- remove hang causing optimisation
amdgpu:
- fix garbage in cleared vram after resume"
* tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()
Revert "drm/nouveau: check ioctl command codes better"
drm/nouveau/nvif: fix null ptr deref on pre-fermi boards
Revert "drm/gem-dma: Use dma_buf from GEM object instance"
Revert "drm/gem-shmem: Use dma_buf from GEM object instance"
Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance"
Revert "drm/prime: Use dma_buf from GEM object instance"
Revert "drm/etnaviv: Use dma_buf from GEM object instance"
Revert "drm/vmwgfx: Use dma_buf from GEM object instance"
Revert "drm/virtio: Use dma_buf from GEM object instance"
drm/sched: Remove optimization that causes hang when killing dependent jobs
drm/amdgpu: Reset the clear flag in buddy during resume
|
|
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
My CC-adding automation returned nothing on a future patch to the
include/linux/in6.h file, and I went looking for why. Add the missed
in6.h to MAINTAINERS.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722165645.work.047-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fix from Paolo Bonzini:
- Fix cleanup mistake (probably a cut-and-paste error) in a Xen
hypercall
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
|
|
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
Fixes: 92c58965e965 ("KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly")
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
[Adjusted commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc8/final?:
- Revert all uses of drm_gem_object->dmabuf to
drm_gem_object->import_attach->dmabuf.
- Fix amdgpu returning BIOS cluttered VRAM after resume.
- Scheduler hang fix.
- Revert nouveau ioctl fix as it caused regressions.
- Fix null pointer deref in nouveau.
- Fix unnecessary semicolon in ti_sn_bridge_probe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/72235afd-c849-49fe-9cc1-2b1781abdf08@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs fix from Al Viro:
"Fix regression in ufs options parsing"
* tag 'pull-ufs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the regression in ufs options parsing
|
|
A really dumb braino on rebasing and a dumber fuckup with managing #for-next
Fixes: b70cb459890b ("ufs: convert ufs to the new mount API")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make sure to drop the references to the accdet OF node and platform
device taken by of_parse_phandle() and of_find_device_by_node() after
looking up the sound component during probe.
Fixes: cf536e2622e2 ("ASoC: mediatek: common: Handle mediatek,accdet property")
Cc: stable@vger.kernel.org # 6.15
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20250722092542.32754-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-22
The patch is by me and fixes a potential NULL pointer deref in the CAN
device driver infrastructure. It can be triggered from user space.
* tag 'linux-can-fixes-for-6.16-20250722' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
====================
Link: https://patch.msgid.link/20250722110059.3664104-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-21 (i40e, ice, e1000e)
For i40e:
Dennis Chen adjusts reporting of VF Tx dropped to a more appropriate
field.
Jamie Bainbridge fixes a check which can cause a PF set VF MAC address
to be lost.
For ice:
Haoxiang Li adds an error check in DDP load to prevent NULL pointer
dereference.
For e1000e:
Jacek Kowalski adds workarounds for issues surrounding Tiger Lake
platforms with uninitialized NVMs.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
====================
Link: https://patch.msgid.link/20250721173733.2248057-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If devicetree describes power supplies related to a PCI device, we
unnecessarily created a pwrctrl device even if CONFIG_PCI_PWRCTL was not
enabled.
We only need pci_pwrctrl_create_device() when CONFIG_PCI_PWRCTRL is
enabled. Compile it out when CONFIG_PCI_PWRCTRL is not enabled.
When pci_pwrctrl_create_device() creates and returns a pwrctrl device,
pci_scan_device() doesn't enumerate the PCI device. It assumes the pwrctrl
core will rescan the bus after turning on the power. However, if
CONFIG_PCI_PWRCTRL is not enabled, the rescan never happens, which breaks
PCI enumeration on any system that describes power supplies in devicetree
but does not use pwrctrl.
Jim reported that some brcmstb platforms break this way. The brcmstb
driver is still broken if CONFIG_PCI_PWRCTRL is enabled, but this commit at
least allows brcmstb to work when it's NOT enabled.
Fixes: 957f40d039a9 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Link: https://lore.kernel.org/r/CA+-6iNwgaByXEYD3j=-+H_PKAxXRU78svPMRHDKKci8AGXAUPg@mail.gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250701064731.52901-1-manivannan.sadhasivam@linaro.org
|
|
this patch is to fix my previous Commit <e5182305a519> i have fixed mute
led but for by This patch corrects the coefficient mask value introduced
in commit <e5182305a519>, which was intended to enable the mute LED
functionality. During testing, multiple values were evaluated, and
an incorrect value was mistakenly included in the final commit.
This update fixes that error by applying the correct mask value for
proper mute LED behavior.
Tested on 6.15.5-arch1-1
Fixes: e5182305a519 ("ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx")
Signed-off-by: SHARAN KUMAR M <sharweshraajan@gmail.com>
Link: https://patch.msgid.link/20250722172224.15359-1-sharweshraajan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Reported-by: Cristian Prundeanu <cpru@amazon.com>
Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt")
Tested-by: Cristian Prundeanu <cpru@amazon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As reported by the kernel test robot, a recent patch introduced an
unnecessary semicolon. Remove it.
Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid
|
|
My previous patch ended up causing a regression for the
DRM_IOCTL_NOUVEAU_NVIF ioctl. The intention of my patch was to only
pass ioctl commands that have the correct dir/type/nr bits into the
nouveau_abi16_ioctl() function.
This turned out to be too strict, as userspace does use at least
write-only and write-read direction settings. Checking for both of these
still did not fix the issue, so the best we can do for the 6.16 release
is to revert back to what we've had since linux-3.16.
This version is still fragile, but at least it is known to work with
existing userspace. Fixing this properly requires a better understanding
of what commands are being passed from userspace in practice, and how
that relies on the undocumented (miss)behavior in nouveau_drm_ioctl().
Fixes: e5478166dffb ("drm/nouveau: check ioctl command codes better")
Reported-by: Satadru Pramanik <satadru@gmail.com>
Closes: https://lore.kernel.org/lkml/CAFrh3J85tsZRpOHQtKgNHUVnn=EG=QKBnZTRtWS8eWSc1K1xkA@mail.gmail.com/
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/lkml/aH9n_QGMFx2ZbKlw@debian.local/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250722115830.2587297-1-arnd@kernel.org
[ Add Closes: tags, fix minor typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
can_priv::do_set_mode
Andrei Lalaev reported a NULL pointer deref when a CAN device is
restarted from Bus Off and the driver does not implement the struct
can_priv::do_set_mode callback.
There are 2 code path that call struct can_priv::do_set_mode:
- directly by a manual restart from the user space, via
can_changelink()
- delayed automatic restart after bus off (deactivated by default)
To prevent the NULL pointer deference, refuse a manual restart or
configure the automatic restart delay in can_changelink() and report
the error via extack to user space.
As an additional safety measure let can_restart() return an error if
can_priv::do_set_mode is not set instead of dereferencing it
unchecked.
Reported-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Closes: https://lore.kernel.org/all/20250714175520.307467-1-andrey.lalaev@gmail.com
Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://patch.msgid.link/20250718-fix-nullptr-deref-do_set_mode-v1-1-0b520097bb96@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
qfq_delete_class
might_sleep could be trigger in the atomic context in qfq_delete_class.
qfq_destroy_class was moved into atomic context locked
by sch_tree_lock to avoid a race condition bug on
qfq_aggregate. However, might_sleep could be triggered by
qfq_destroy_class, which introduced sleeping in atomic context (path:
qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key
->might_sleep).
Considering the race is on the qfq_aggregate objects, keeping
qfq_rm_from_agg in the lock but moving the left part out can solve
this issue.
Fixes: 5e28d5a3f774 ("net/sched: sch_qfq: Fix race condition on qfq_aggregate")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/4a04e0cc-a64b-44e7-9213-2880ed641d77@sabinyo.mountain
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250717230128.159766-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mutexes qdev_mutex and chip->mutex are acquired in that order
throughout the driver. To preserve proper lock hierarchy and avoid
potential deadlocks, they must be released in the reverse
order of acquisition.
This change reorders the unlock sequence to first release chip->mutex
followed by qdev_mutex, ensuring consistency with the locking pattern.
[ fixed the code indentations and Fixes tag by tiwai ]
Fixes: 326bbc348298a ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Link: https://patch.msgid.link/20250721114554.1666104-1-karanja99erick@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ")
Co-developed-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
race condition:
cpu 0 | cpu 1
atalk_sendmsg() | atif_proxy_probe_device()
aarp_send_ddp() | aarp_proxy_probe_network()
mod_timer() | lock(aarp_lock) // LOCK!!
timeout around 200ms | alloc(aarp_entry)
and then call | proxies[hash] = aarp_entry
aarp_expire_timeout() | aarp_send_probe()
| unlock(aarp_lock) // UNLOCK!!
lock(aarp_lock) // LOCK!! | msleep(100);
__aarp_expire_timer(&proxies[ct]) |
free(aarp_entry) |
unlock(aarp_lock) // UNLOCK!! |
| lock(aarp_lock) // LOCK!!
| UAF aarp_entry !!
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc1/0x630 mm/kasan/report.c:521
kasan_report+0xca/0x100 mm/kasan/report.c:634
aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
sock_do_ioctl+0xdc/0x260 net/socket.c:1190
sock_ioctl+0x239/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated:
aarp_alloc net/appletalk/aarp.c:382 [inline]
aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
Freed:
kfree+0x148/0x4d0 mm/slub.c:4841
__aarp_expire net/appletalk/aarp.c:90 [inline]
__aarp_expire_timer net/appletalk/aarp.c:261 [inline]
aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address:
ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On ASP versions v2.x we need to program the TX map vector register to
properly exercise end-to-end flow control, otherwise the TX engine can
either lock-up, or cause the hardware calculated checksum to be
wrong/corrupted when multiple back to back packets are being submitted
for transmission. This register defaults to 0, which means no flow
control being applied.
Fixes: e9f31435ee7d ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250718212242.3447751-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: connect: cover alt modes
mptcp_connect.sh can be executed manually with "-m <MODE>" and "-C" to
make sure everything works as expected when using "mmap" and "sendfile"
modes instead of "poll", and with the MPTCP checksum support.
These modes should be validated, but they are not when the selftests are
executed via the kselftest helpers. It means that most CIs validating
these selftests, like NIPA for the net development trees and LKFT for
the stable ones, are not covering these modes.
To fix that, new test programs have been added, simply calling
mptcp_connect.sh with the right parameters.
The first patch can be backported up to v5.6, and the second one up to
v5.14.
v1: https://lore.kernel.org/20250714-net-mptcp-sft-connect-alt-v1-0-bf1c5abbe575@kernel.org
====================
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-0-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8e4 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the PF is processing an Admin Queue message to delete a VF's MACs
from the MAC filter, we currently check if the PF set the MAC and if
the VF is trusted.
This results in undesirable behaviour, where if a trusted VF with a
PF-set MAC sets itself down (which sends an AQ message to delete the
VF's MAC filters) then the VF MAC is erased from the interface.
This results in the VF losing its PF-set MAC which should not happen.
There is no need to check for trust at all, because an untrusted VF
cannot change its own MAC. The only check needed is whether the PF set
the MAC. If the PF set the MAC, then don't erase the MAC on link-down.
Resolve this by changing the deletion check only for PF-set MAC.
(the out-of-tree driver has also intentionally removed the check for VF
trust here with OOT driver version 2.26.8, this changes the Linux kernel
driver behaviour and comment to match the OOT driver behaviour)
Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the tx_dropped field in VF stats is not updated correctly
when reading stats from the PF. This is because it reads from
i40e_eth_stats.tx_discards which seems to be unused for per VSI stats,
as it is not updated by i40e_update_eth_stats() and the corresponding
register, GLV_TDPC, is not implemented[1].
Use i40e_eth_stats.tx_errors instead, which is actually updated by
i40e_update_eth_stats() by reading from GLV_TEPC.
To test, create a VF and try to send bad packets through it:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ cat test.py
from scapy.all import *
vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP()
ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP()
print("Send packet with bad VLAN tag")
sendp(vlan_pkt, iface="enp2s0f0v0")
print("Send packet with TTL=0")
sendp(ttl_pkt, iface="enp2s0f0v0")
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
$ python test.py
Send packet with bad VLAN tag
.
Sent 1 packets.
Send packet with TTL=0
.
Sent 1 packets.
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
A packet with non-existent VLAN tag and a packet with TTL = 0 are sent,
but tx_dropped is not incremented.
After patch:
$ ip -s link show dev enp2s0f0
19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 2
Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO")
Signed-off-by: Dennis Chen <dechen@redhat.com>
Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
