summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-07m68k: Fix stack mangling logics in sigreturnAl Viro
a) we should hold modifying regs->format until we know we *will* be doing stack expansion; otherwise attacker can modify sigframe to have wrong ->sc_formatvec and install SIGSEGV handler. b) we should *not* mix copying saved extra stuff from userland with expanding the stack; once we'd done that manual memmove, we'd better not return to C, so cleanup is very hard to do. The easiest way is to copy it on stack first, making sure we won't overwrite on stack expansion. Fortunately that's easy to do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: If we fail to set sigframe up, just leave regs alone...Al Viro
Same principle as with the previous patch - do not destroy the state if sigframe setup fails. Incidentally, it's actually _less_ work - we don't need to go through adjust_stack dance on failure if we don't touch regs->stkadj until we know we'd written sigframe out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Don't lose state if sigframe setup failsAl Viro
If we'd failed in setup_frame(), we've no place to store the original sigmask. It's not an unrecoverable situation - we raise SIGSEGV, but that SIGSEGV might be successfully handled (e.g. on altstack). In that case we really don't want sa_mask of original signal permanently slapped on the set of blocked signals. Standard solution: have setup_frame()/setup_rt_frame() report failure and don't mess with the signal-related state if that has happened... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Simplify the singlestepping handling in signalsAl Viro
Instead of checking the return value of do_signal() we can just do the work (raise SIGTRAP and clear SR.T1) directly in handle_signal(), when setting the sigframe up. Simplifies the assembler glue and is closer to the way we do it on other targets. Note that do_delayed_trace does *not* disappear; it's still needed to deal with single-stepping through syscall, since 68040 doesn't raise the trace exception at all if the trap exception is pending. We hit it after returning from sys_...() if TIF_DELAYED_TRACE is set; all that has changed is that we don't reuse it for "single-step into the handler" codepath. As the result, do_signal() doesn't need to return anything anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Switch to saner sigsuspend()Al Viro
and saner do_signal() arguments, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07x86, AMD, PCI: Add AMD northbridge PCI device id for CPU families 12h and 14hRobert Richter
This patch adds the PCI northbridge device id for AMD CPU families 12h and 14h. Both families have implemented the same PCI northbridge device. There are some future use cases that use this PCI device and we would like to clarify its naming. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: xen-devel@lists.xensource.com <xen-devel@lists.xensource.com> Cc: Keir Fraser <keir@xen.org> Cc: Jan Beulich <JBeulich@novell.com> LKML-Reference: <20110106165107.GL4739@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07m68k: Resetting sa_handler in local copy of k_sigaction is pointlessAl Viro
... and had been such since the introduction of get_signal_to_deliver() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07dccp: make upper bound for seq_window consistent on 32/64 bitGerrit Renker
The 'seq_window' sysctl sets the initial value for the DCCP Sequence Window, which may range from 32..2^46-1 (RFC 4340, 7.5.2). The patch sets the upper bound consistently to 2^32-1 on both 32 and 64 bit systems, which should be sufficient - with a RTT of 1sec and 1-byte packets, a seq_window of 2^32-1 corresponds to a link speed of 34 Gbps. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07dccp: fix bug in updating the GSRSamuel Jero
Currently dccp_check_seqno allows any valid packet to update the Greatest Sequence Number Received, even if that packet's sequence number is less than the current GSR. This patch adds a check to make sure that the new packet's sequence number is greater than GSR. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07dccp: fix return value for sequence-invalid packetsSamuel Jero
Currently dccp_check_seqno returns 0 (indicating a valid packet) if the acknowledgment number is out of bounds and the sync that RFC 4340 mandates at this point is currently being rate-limited. This function should return -1, indicating an invalid packet. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07EDAC, MCE: Fix NB error formattingBorislav Petkov
Minor formatting fixup since the information which core was associated with the MCE is not always valid. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bitRandy Dunlap
Building for X86_32 produces shift count warnings, so use BIT_64() to eliminate the warnings. drivers/edac/mce_amd.c:778: warning: left shift count >= width of type drivers/edac/mce_amd.c:778: warning: left shift count >= width of type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: bluesmoke-devel@lists.sourceforge.net Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Enable MCE decoding on F15hBorislav Petkov
Now that everything is inplace, enable MCE decoding on F15h. Make initcall routine a bit more readable. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Allow F15h bank 6 MCE injectionBorislav Petkov
F15h adds a sixth MCE bank: adjust bank number check in the injection code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Shorten error report formattingBorislav Petkov
Shorten up MCi_STATUS flags and add BD's new deferred and poison types. Also, simplify formatting. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Overhaul error fields extraction macrosBorislav Petkov
Make macro names shorter thus making code shorter and more clear. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h FP MCE decoderBorislav Petkov
Add decoder for FP MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15 EX MCE decoderBorislav Petkov
Integrate the single FIROB signature into an expanded table along with the new BD MCE types. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add an F15h NB MCE decoderBorislav Petkov
by (almost) reusing the F10h one since the signatures are the same. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: No F15h LS MCE decoderBorislav Petkov
F15h BD doesn't generate LS MCEs so warn about it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h CU MCE decoderBorislav Petkov
MCE bank 2 is redefined from a BU to a CU (Combined Unit) bank on F15h. Add a decoder function for CU MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h IC MCE decoderBorislav Petkov
Add support for decoding F15h IC MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h DC MCE decoderBorislav Petkov
Add a decoder for F15h DC MCEs to support the new types of DC MCEs introduced by the BD microarchitecture. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Select extended error code maskBorislav Petkov
F15h enlarges the extended error code of an MCE to a 5-bit field (MCi_STATUS[20:16]). Add a mask variable which default 0xf is overridden on F15h. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Disable DRAM ECC injection on K8Borislav Petkov
K8 does not allow for an atomic RMW to a cacheline as F10h does so disable the error injection interface for it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC: Fixup scrubrate manipulationBorislav Petkov
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate bandwidth it succeeded setting and remove superfluous arg pointer used for that. A negative value returned still means that an error occurred while setting the scrubrate. Document this for future reference. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove two-stage initializationBorislav Petkov
Now that all prerequisites are in place, drop the two-stage driver instances initialization in favor of the following simple init sequence: 1. Probe PCI device: we only test ECC capabilities here and if none exit early. 2. If the hw supports ECC and it is/can be enabled, we init the per-node instance. Remove "amd64_" prefix from static functions touched, while at it. There actually should be no visible functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Check ECC capabilities initiallyBorislav Petkov
Rework the code to check the hardware ECC capabilities at PCI probing time. We do all further initialization only if we actually can/have ECC enabled. While at it: 0. Fix function naming. 1. Simplify/clarify debug output. 2. Remove amd64_ prefix from the static functions 3. Reorganize code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Carve out ECC-related hw settingsBorislav Petkov
This is in preparation for the init path reorganization where we want only to 1) test whether a particular node supports ECC 2) can it be enabled and only then do the necessary allocation/initialization. For that, we need to decouple the ECC settings of the node from the instance's descriptor. The should be no functional change introduced by this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove PCI ECS enabling functionsBorislav Petkov
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is just superfluous now, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove explicit Kconfig PCI dependencyBorislav Petkov
AMD_NB pulls in the dependency on PCI. Clarify/fix help text while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Allocate driver instances dynamicallyBorislav Petkov
Remove static allocation in favor of dynamically allocating space for as many driver instances as northbridges present on the system. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rework printk macrosBorislav Petkov
Add a macro per printk level, shorten up error messages. Add relevant information to KERN_INFO level. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rename CPU PCI devicesBorislav Petkov
Rename variables representing PCI devices to their BKDG names for faster search and shorter, clearer code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Concentrate per-family init even moreBorislav Petkov
Move the remaining per-family init code into the proper place and simplify the rest of the initialization. Reorganize error handling in amd64_init_one_instance(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Cleanup the CPU PCI device reservationBorislav Petkov
Shorten code and clarify comments, return proper -E* values on error. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Simplify CPU family detectionBorislav Petkov
Concentrate CPU family detection in the per-family init function. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Add per-family init functionBorislav Petkov
Run a per-family init function which does all the settings based on the family this driver instance is running on. Move the scrubrate calculation in it and simplify code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Use cached extended CPU modelBorislav Petkov
... instead of computing it needlessly again. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove F11h supportBorislav Petkov
F11h doesn't support DRAM ECC so whack it away. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07blktrace: add missing probe argument to block_bio_completeMathieu Desnoyers
blktrace.c block bio complete callback needs to gain a new argument to reflect the newly added "error" tracepoint argument. This is needed to match the new block_bio_complete TRACE_EVENT as of commit de983a7bfcb7c020901ca6e2314cf55a4207ab5a. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Jeff Moyer <jmoyer@redhat.com> CC: Steven Rostedt <rostedt@goodmis.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07block cfq: don't use atomic_t for cfq_groupShaohua Li
cfq_group->ref is used with queue_lock hold, the only exception is cfq_set_request, which looks like a bug to me, so ref doesn't need to be an atomic and atomic operation is slower. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07block cfq: don't use atomic_t for cfq_queueShaohua Li
cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic and atomic operation is slower. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07block: trace event block fix unassigned fieldJeff Moyer
The "error" field in block_bio_complete is not assigned, leaving the memory area uninitialized (keeping garbage data). Pass an additional tracepoint argument to this event to initialize this field. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Steven Rostedt <rostedt@goodmis.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: Li Zefan <lizf@cn.fujitsu.com> CC: Alan.Brunelle@hp.com Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07block: add internal hd part table referencesJens Axboe
We can't use krefs since it's apparently restricted to very basic reference counting. This reverts commit e4a683c8. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-06Input: cy8ctmg110_ts - Convert to dev_pm_opsMark Brown
There is a general move towards the use of dev_pm_ops rather than bus specific suspend APIs as this simplifies both the bus and PM core implementations. Convert the cy8ctmg110_ts driver over. Compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-06Input: migor_ts - convert to dev_pm_opsMark Brown
There is a general move towards the use of dev_pm_ops rather than bus specific suspend APIs as this simplifies both the bus and PM core implementations. Convert the migor_ts driver over. Compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-06Input: mcs5000_ts - convert to dev_pm_opsMark Brown
There is a general move towards the use of dev_pm_ops rather than bus specific suspend APIs as this simplifies both the bus and PM core implementations. Convert the mcs5000_ts driver over. Compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-06Input: eeti_ts - convert to dev_pm_opsMark Brown
There is a general move towards the use of dev_pm_ops rather than bus specific suspend APIs as this simplifies both the bus and PM core implementations. Convert the eeti_ts driver over. Compile tested only by me, but Sven Neumann reports that the new code works. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-06Input: ad7879 - convert I2C to dev_pm_opsMark Brown
There is a general move towards the use of dev_pm_ops rather than bus specific suspend APIs as this simplifies both the bus and PM core implementations. Convert the ad7879-ts I2C support over. Compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit (git 2.34.1) at 2025-09-29 12:00:56 +0000