summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-09ARM: omap3: Thumb-2 compatibility for sram34xx.SDave Martin
* Build unconditionally as ARM for correct interoperation with OMAP firmware. * Remove deprecated PC-relative stores * Add the required ENDPROC() directive for each ENTRY(). * .align before data words Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap3: Remove hand-encoded SMC instructionsDave Martin
For various reasons, Linux now only officially supports being built with tools which are new enough to understand the SMC instruction. Replacing the hand-encoded instructions when the mnemonic also allows for correct assembly in Thumb-2 (otherwise, the result is random data in the middle of the code). The Makefile already ensures that this file is built with a high enough gcc -march= flag (armv7-a). Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap4: Convert END() to ENDPROC() for correct linkage with ↵Dave Martin
CONFIG_THUMB2_KERNEL Code marked with ENTRY() also needs a matching ENDPROC() directive, in order to ensure that the type and instruction set of the symbol are correctly annotated. ENDPROC() tags the affected symbol as a function symbol, which will ensure that link-time fixups don't accidentally switch to the wrong instruction set. Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap4: Provide do_wfi() for Thumb-2Dave Martin
For CONFIG_THUMB2_KERNEL, the existing definition of do_wfi() will insert invalid code into the instruction stream. Any assembler which can assemble Thumb-2 is guaranteed to accept the "wfi" mnemonic, so for the Thumb-2 case, just use the mnemonic. The ARM case is left as-is. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: PM: Initialize IVA only if availableSanjeev Premi
IVA device is not present in many OMAP3 variants. This patch ensures that initialization is tied to the presence of IVA on the device. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: PM: Set/clear T2 bit for Smartreflex on TWLThara Gopinath
Voltage control on TWL can be done using VMODE/I2C1/I2C_SR. Since almost all platforms use I2C_SR on omap3, omap3_twl_init by default expects that OMAP's I2C_SR is plugged in to TWL's I2C and calls omap3_twl_set_sr_bit. On platforms where I2C_SR is not connected, the board files are expected to call omap3_twl_set_sr_bit(false) to ensure that I2C_SR path is not set for voltage control and prevent the default behavior of omap3_twl_init. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09omap3: cpuidle: Add description field to each C-state.Santosh Shilimkar
Add a description field to each idle C-state. This helps to give better data with PowerTop and one don't have to refer to the code to link what Cx means from system point of view while analysing PowerTop data. No functional change. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09omap3: pm: Use exported set_cr() instead of a custom one.Santosh Shilimkar
Remove the custom restore_control_register() and use the exported set_cr() instead to set the system control register(SCTRL) value. No functional change. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clearPaul Walmsley
The OMAP2 and OMAP3 PM code clears clockdomain wakeup and sleep dependencies. This is unnecessary after commit 6f7f63cc9adf3192e6fcac4e8bed5cc10fd924aa ("OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts") which clears these dependencies during clockdomain init. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP2+: remove unused UART base addresses from omap_globalsKevin Hilman
Now that omap_hwmod + omap_device is used for OMAP UART device and driver code, we no longer need the UART physical addresses in omap_globals. Note that the #defines for the base addresses are still left in <plat/serial.h> since they are used by DEBUG_LL and uncompress code. Build tested for OMAP1 (omap1_defconfig) and OMAP2+ (omap2plus_defconfig) Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP: PM: SmartReflex: fix potential NULL dereferenceVasiliy Kulikov
kzalloc() may fail, if so return -ENOMEM. Also Walter Harms suggested to use kasprintf() instead of kzalloc+strcpy+strcat. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: beagle xm: enable up to 800MHz OPPNishanth Menon
OMP3630 silicon can enable higher frequencies only depending on the board characteristics meeting the recommended standards, and has to be selectively toggled. Beagle XM uses 3730 variant and the board design allows enabling 800MHz and 1GHz OPPs. However, We need Smart reflex class 1.5 and ABB to enable 1GHz safely. For the moment, we tweak the default table to allow for 800Mhz OPP usage. Reported-by: Koen Kooi <koen@beagleboard.org> Tested-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3|4: OPP: make omapx_opp_init non-staticMenon, Nishanth
omap3 and omap4 opp_init should be made non-static to allow for platform specific opp table tweaking. making these static conflicts with the definition in pm.h(global) as well. we include pm.h as well to ensure that there are no such prototype conflicts with actual implementation in the future. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUMRicardo Salveti de Araujo
In case in user has a OMAP3630 < ES1.2 the kernel should warn the user about the ERRATUM, but using pr_warn instead of WARN_ON is already enough, as there is nothing else the user can do besides changing the board. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09MAINTAINERS: update Kevin's email for OMAP PM sectionKevin Hilman
Change my email to TI email address for OMAP PM maintenance. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09drivers:misc: ti-st: fix debugging codePavan Savoy
debug code in TI-ST driver can be enabled by #defining DEBUG in the first line of the code and in case debugfs is mounted, the 2 entries in /sys/kernel/debug/ti-st/ will also provide useful information. These 2 were broken because of the recent changes to the parsing logic and the registration mechanism of the protocol drivers, this patch fixes them. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-10powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: core irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/xilinx_intc irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/uic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/tsi108_pci irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/qe_lib/qe_ic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/mv64x60_pic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/mpc8xxx_gpio irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/mpc8xx_pic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/ipic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/i8259 irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/fsl_msi irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/cpm2_pic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: sysdev/cpm1 irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/pseries irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/ps3 irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/powermac irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/iseries irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/embedded6xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/chrp irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/cell irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/8xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/86xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/85xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/82xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/52xx irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: platforms/512x irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10powerpc: mpic irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-09staging: xgifb: vb_init: make internal functions staticAaro Koskinen
Make some internal functions static. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09staging: xgifb: vb_init: delete unused functionsAaro Koskinen
Delete unused functions. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09staging: xgifb: vb_init: delete redundant declarationsAaro Koskinen
Delete redundant declarations. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09staging: xgifb: vb_ext: make internal functions staticAaro Koskinen
Make internal functions static. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09staging: xgifb: vb_ext: delete unused functionsAaro Koskinen
Delete unused functions. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09staging: xgifb: vb_ext: delete redundant declarationsAaro Koskinen
Delete redundant declarations. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-29 21:50:42 +0000