summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-07ARM: iomux-imx31: allow pin_list to be constUwe Kleine-König
This fixes the following warning in a mx3_defconfig build: arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init': arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx53_smd: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx25_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx27_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx31_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx35_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: Add SSI and aic3204 code to Visstrim_M10 boards.Javier Martin
Visstrim_M10 boards have an TI tlv320aic3204 codec attached to SSI1. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx3/cpuimx35: fix build failureUwe Kleine-König
It seems vim's autocompletion played tricks on me without me noticing. This was intruduced in 97976e2 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx53_loco: add esdhc device supportRichard Zhu
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx51/53: add sdhc3/4 clockRichard Zhu
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: tx28: add i2c bus and connected RTCWolfram Sang
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: add i2c-devices for mx28Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add registration functions for SPI.Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add data structure for SPIGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Register clock for SPI2Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Rename SPI interrupt name and base address.Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix trivial copy/paste errorRyan Lortie
Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in mach-mx3/devices-imx35.h. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix ATA_DATA3 pad control addressRyan Lortie
According to the "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual" the correct address for the pad control register IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07i.MX25: add sdma clock definitionsEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: Initial support for Ka-Ro TX28Lothar Waßmann
Based on code created by Lothar Waßmann, Sascha Hauer, Wolfram Sang and me. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-07ARM: mxs: Add missing EXPORT_SYMBOL for mxs_reset_blockSascha Hauer
It is used for example in the i2c driver which can be compiled modular. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-07ASoC: Remove warnings in ep93xx-i2s.cAlexander Sverdlin
Remove warnings in ep93xx-i2s.c Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Extend range of supported sample rates for CS4271 CODEC.Alexander Sverdlin
Extend range of supported sample rates for CS4271 CODEC. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07nfsd4: fix bad pointer on failure to find delegationJ. Bruce Fields
In case of a nonempty list, the return on error here is obviously bogus; it ends up being a pointer to the list head instead of to any valid delegation on the list. In particular, if nfsd4_delegreturn() hits this case, and you're quite unlucky, then renew_client may oops, and it may take an embarassingly long time to figure out why. Facepalm. BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffff81292965>] nfsd4_delegreturn+0x125/0x200 ... Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-03-07ext3: Always set dx_node's fake_dirent explicitly.Eric Sandeen
(crossport of 1f7bebb9e911d870fa8f997ddff838e82b5715ea by Andreas Schlick <schlick@lavabit.com>) When ext3_dx_add_entry() has to split an index node, it has to ensure that name_len of dx_node's fake_dirent is also zero, because otherwise e2fsck won't recognise it as an intermediate htree node and consider the htree to be corrupted. CC: stable@kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-03-07Btrfs: deal with short returns from copy_from_userChris Mason
When copy_from_user is only able to copy some of the bytes we requested, we may end up creating a partially up to date page. To avoid garbage in the page, we need to treat a partial copy as a zero length copy. This makes the rest of the file_write code drop the page and retry the whole copy instead of marking the partially up to date page as dirty. Signed-off-by: Chris Mason <chris.mason@oracle.com> cc: stable@kernel.org
2011-03-07Btrfs: fix regressions in copy_from_user handlingChris Mason
Commit 914ee295af418e936ec20a08c1663eaabe4cd07a fixed deadlocks in btrfs_file_write where we would catch page faults on pages we had locked. But, there were a few problems: 1) The x86-32 iov_iter_copy_from_user_atomic code always fails to copy data when the amount to copy is more than 4K and the offset to start copying from is not page aligned. The result was btrfs_file_write looping forever retrying the iov_iter_copy_from_user_atomic We deal with this by changing btrfs_file_write to drop down to single page copies when iov_iter_copy_from_user_atomic starts returning failure. 2) The btrfs_file_write code was leaking delalloc reservations when iov_iter_copy_from_user_atomic returned zero. The looping above would result in the entire filesystem running out of delalloc reservations and constantly trying to flush things to disk. 3) btrfs_file_write will lock down page cache pages, make sure any writeback is finished, do the copy_from_user and then release them. Before the loop runs we check the first and last pages in the write to see if they are only being partially modified. If the start or end of the write isn't aligned, we make sure the corresponding pages are up to date so that we don't introduce garbage into the file. With the copy_from_user changes, we're allowing the VM to reclaim the pages after a partial update from copy_from_user, but we're not making sure the page cache page is up to date when we loop around to resume the write. We deal with this by pushing the up to date checks down into the page prep code. This fits better with how the rest of file_write works. Signed-off-by: Chris Mason <chris.mason@oracle.com> Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> cc: stable@kernel.org
2011-03-07ASoC: Add LM4857 to SND_SOC_ALL_CODECSMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-07Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson
Apply the trivial conflicting regression fixes, but keep GPU semaphores enabled. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_execbuffer.c
2011-03-07ASoC: Add driver for the dfbmcs320 bluetooth moduleLars-Peter Clausen
This patch adds a codec driver for the dfbmcs320 bluetooth module, which is used on the neo1973 boards. The patch also modifies the neo1937_wm8753 sound board driver to use the new driver instead of registering the bluetooth DAI manually. Previously there was a name mismatch between the bluetooth DAI and the bluetooth DAI link and the sound card was not instantiated, with this patch the issue is no longer present and sound support works again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driverLars-Peter Clausen
The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware setup. They both use the same codec with the same routing to the gsm modem and bluetooth chip. But they do use different AMPs though and there are some minor differences in the speaker setup. As a result most of the code of those two drivers is identical. So from a maintenance point of view it makes sense to merge them into a single driver. It also reduces the size of kernel images supporting both the GTA01 and GTA02. As a side-effect of this merge the GTA01 for example gains support for routing audio to and from the bluetooth DAI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpiosLars-Peter Clausen
Using gpio_request_array instead of requesting and setting up each gpio by hand makes the code more readable and more compact. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_stateLars-Peter Clausen
This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch" control. Those were noops which existed to maintain alsa state file compatibility. Since the control names have changed due to internal changes in the ASoC core and state file compatibility was broken anyway it makes sense to drop them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Move lm4857 specefic code to its own moduleLars-Peter Clausen
This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound board driver to its own module. The lm4857 is a generic AMP IC and not specific to the neo1973. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Remove scenario management code.Lars-Peter Clausen
It has been proven to be inflexible to do scenario management in kernel space. Since actual neo1973 board support has not been merged in mainline and this patch has been in the neo1973 tree for some time now it should be safe to remove this functionality without breaking existing userspace. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Add machine driver for Visstrim_M10 board.Javier Martin
Visstrim_M10 boards have an external tlcv320aic3205 codec attached to SSI1. This driver glues together both interfaces. External amplifier is not supported in this first version. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Constify i2c_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: tlv320dac33: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Add missing debugfs conditionalsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-07ASoC: Fix outdated API usage in tlv320aic32x4Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-07drm/i915: Only wait on a pending flip if we intend to write to the bufferChris Wilson
... as if we are only reading from it, we can do that concurrently with the queue flip. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07drm/i915/dp: Sanity check eDP existenceChris Wilson
Some hardware claims to have both an LVDS panel and an eDP output. Whilst this may be true in a rare case, more often it is just broken hardware. If we see an eDP device we know that it must be connected and so we can confirm its existence with a simple probe. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34165 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=24822 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07drm/i915: Rebind the buffer if its alignment constraints changes with tilingChris Wilson
Early gen3 and gen2 chipset do not have the relaxed per-surface tiling constraints of the later chipsets, so we need to check that the GTT alignment is correct for the new tiling. If it is not, we need to rebind. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07drm/i915: Disable GPU semaphores by defaultChris Wilson
Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09 down to the use of GPU semaphores, and we already know that they appear broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling GPU semaphores is simply hiding another bug by the latency and side-effects of the additional device interaction it introduces...) However, use of semaphores is a massive performance improvement... Only as long as the system remains stable. Enable at your peril. Reported-by: Andi Kleen <andi-fd@firstfloor.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeupRajendra Nayak
For the I2C module to be wakeup capable, programming I2C_WE register (which was skipped for OMAP4430) is needed even on OMAP4. This fixes i2c controller timeouts which were seen recently with the static dependency being cleared between MPU and L4PER clockdomains. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [ben-linux@fluff.org: re-flowed description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-07Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-03-07ARM: EXYNOS4: Remove meaningless REGULATOR config optionKyungmin Park
The regulator API ifdefs itself out when not enabled so there is no need for users to do this. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: edited description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-06bnx2x: fix MaxBW configurationDmitry Kravkov
Increase resolution of MaxBW algorithm to suit Min Bandwidth configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: (NPAR) prevent HW access in D3 stateDmitry Kravkov
Changing speed setting in NPAR requires HW access, this patch delays the access to D0 state when performed in D3. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-06bnx2x: fix link notificationDmitry Kravkov
Report link to OS and other PFs after HW is fully reconfigured according to new link parameters. (Affected only Multi Function modes). Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-03 05:07:17 +0000