summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-16hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributesGuenter Roeck
The alarm bit assumed to be a low voltage alarm bit is not set for low voltage alarms, and the alarm bit assumed to be a high voltage alarm turns out to be a general alarm bit which is set for both low and high voltage alarms. Remove the in1_min_alarm sysfs attribute and rename in1_max_alarm to in1_alarm to reflect the situation. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-16prune back iprune_semChristoph Hellwig
iprune_sem is continously giving us lockdep warnings because we do take it in read mode in the reclaim path, but we're also doing non-NOFS allocations under it taken in write mode. Taking a bit deeper look at it I think it's fixable quite trivially: - for invalidate_inodes we do not need iprune_sem at all. We have an active reference on the superblock, so the filesystem is not going away until it has finished. - for evict_inodes we do need it, to make sure prune_icache has done it's work before we tear down the superblock. But there is no reason to hold it over the actual reclaim operation - it's enough to cycle through it after the actual reclaim to make sure we wait for any pending prune_icache to complete. We just have to remove the WARN_ON for otherwise busy inodes as they can actually happen now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-16vfs: add nonconflicting values for O_PATHStephen Rothwell
[AV: on architectures where default conflicts with existing flags, that is] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-16oprofile, s390: CleanupsRobert Richter
Remove unused HAVE_HWSAMPLER config option. It is not used anymore, removing it. Also make some functions static and some coding style fixes. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-16oprofile, s390: Remove hwsampler_files.c and merge it into init.cHeinz Graalfs
Merge the contents of hwsampler_files.c into arch/s390/oprofile/init.c. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-16perf: Fix tear-down of inherited group eventsPeter Zijlstra
When destroying inherited events, we need to destroy groups too, otherwise the event iteration in perf_event_exit_task_context() will miss group siblings and we leak events with all the consequences. Reported-and-tested-by: Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> # .35+ LKML-Reference: <1300196470.2203.61.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf: Reorder & optimize perf_event_context to remove alignment padding on ↵Richard Kennedy
64 bit builds Remove 8 bytes of alignment padding from perf_event_context on 64 bit builds which shrinks its size to 192 bytes allowing it to fit into one fewer cache lines and into a smaller slab. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299512819.2039.5.camel@castor.rsk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf: Handle stopped state with tracepointsFrederic Weisbecker
We toggle the state from start and stop callbacks but actually don't check it when the event triggers. Do it so that these callbacks actually work. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299529629-18280-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf: Fix the software events state checkFrederic Weisbecker
Fix the mistakenly inverted check of events state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@kernel.org> LKML-Reference: <1299529629-18280-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf, powerpc: Handle events that raise an exception without overflowingAnton Blanchard
Events on POWER7 can roll back if a speculative event doesn't eventually complete. Unfortunately in some rare cases they will raise a performance monitor exception. We need to catch this to ensure we reset the PMC. In all cases the PMC will be 256 or less cycles from overflow. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> # as far back as it applies cleanly LKML-Reference: <20110309143842.6c22845e@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraintsLin Ming
PEBS_EVENT_CONSTRAINT() is just a duplicate of INTEL_UEVENT_CONSTRAINT(). Remove it and use INTEL_UEVENT_CONSTRAINT() instead. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299684089-22835-3-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16perf, x86: Clean up SandyBridge PEBS eventsLin Ming
Use INTEL_EVENT_CONSTRAINT() for the events where all umasks support PEBS. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299684089-22835-2-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16x86, AMD: Set ARAT feature on AMD processorsBoris Ostrovsky
Support for Always Running APIC timer (ARAT) was introduced in commit db954b5898dd3ef3ef93f4144158ea8f97deb058. This feature allows us to avoid switching timers from LAPIC to something else (e.g. HPET) and go into timer broadcasts when entering deep C-states. AMD processors don't provide a CPUID bit for that feature but they also keep APIC timers running in deep C-states (except for cases when the processor is affected by erratum 400). Therefore we should set ARAT feature bit on AMD CPUs. Tested-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> LKML-Reference: <1300205624-4813-1-git-send-email-ostr@amd64.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16x86, quirk: Fix SB600 revision checkAndreas Herrmann
Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) introduced a regression. It removed some SB600 specific code to determine the revision ID without adapting a corresponding revision ID check for SB600. See this mail thread: http://marc.info/?l=linux-kernel&m=129980296006380&w=2 This patch adapts the corresponding check to cover all SB600 revisions. Tested-by: Wang Lei <f3d27b@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org # 38.x, 37.x, 32.x LKML-Reference: <20110315143137.GD29499@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16sched, kernel-doc: Fix runqueue_is_locked() descriptionRandy Dunlap
Fix kernel-doc warning for runqueue_is_locked(): Warning(kernel/sched.c:664): missing initial short description Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110315161230.c4e1e8e3.rdunlap@xenotime.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-16Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2011-03-16perf lock: Fix sorting by wait_minMarcin Slusarz
If lock was uncontended, wait_time_min == ULLONG_MAX, so we need to handle this case differently to show high wait times first Acked-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110222174715.GC9687@joi.lan> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-16UBIFS: clean-up commentariesArtem Bityutskiy
Clean-up commentaries in debug.h and remove references to non-existing symblols. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: save 128KiB or more RAMArtem Bityutskiy
When debugging is enabled, we allocate a buffer of PEB size for various debugging purposes. However, now all users of this buffer are gone and we can safely remove it and save 128KiB or more RAM. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate orphans scan buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_scan_orphans()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate lpt dump buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dump_lpt_leb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate ltab checking buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_check_ltab_lnum()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate scanning buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'scan_check_cb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate dump buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_dump_leb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16perf tools: Version incorrect with some versions of grepJosh Hunt
Some versions of grep don't treat '\s' properly. When building perf on such systems and using a kernel tarball the perf version is unable to be determined from the main kernel Makefile and the user is left with a version of '..'. Replacing the use of '\s' with '[[:space:]]', which should work in all grep versions, gives a usable version number. Reported-by: Tapan Dhimant <tdhimant@akamai.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tapan Dhimant <tdhimant@akamai.com> Cc: linux-kernel@vger.kernel.org Cc: stable@kernel.org LKML-Reference: <1300241800-30281-1-git-send-email-johunt@akamai.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-16UBI: make tests modes dynamicArtem Bityutskiy
Similarly to the debugging checks and message, make the test modes be dynamically selected via the "debug_tsts" module parameter or via the "/sys/module/ubi/parameters/debug_tsts" sysfs file. This is consistent with UBIFS as well. And now, since all the Kconfig knobs became dynamic, we can remove the Kconfig.debug file completely. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: make self-checks dynamicArtem Bityutskiy
This patch adds a possibility to dynamically switch UBI self-checks on and off, instead of toggling them compile-time from the configuration menu. This is much more flexible, and consistent with UBIFS, and this also simplifies UBI Kconfig menu and the code. This patch introduces two levels of self-checks - general, which includes all self-checks which are relatively fast, and I/O, which includes write-verify checks and erase-verify checks, which are relatively slow and involve flash I/O. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: make debugging messages dynamicArtem Bityutskiy
This patch adds a possibility to dynamically select UBI debugging messages, instead of selecting them compile-time from the configuration menu. This is much more flexible, and consistent with UBIFS, and this also simplifies UBI Kconfig menu and the code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: remove UBI_IO_DEBUG macroArtem Bityutskiy
This additional little macro is used to print a bit more messages while scanning the media. However, we have the 'dbg_bld()' macro for this, so we better us 'dbg_bld()' and kill UBI_IO_DEBUG. This simplifies the code a tiny bit. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: kill debugging bufferArtem Bityutskiy
This patch kills the 'ubi->dbg_peb_buf' debugging buffer and the associated mutex, because all users of this buffer are now gone. We are killing this buffer because we are going to switch to dynamic debugging control, just like in UBIFS, which means that CONFIG_MTD_UBI_DEBUG_PARANOID will be removed. In this case we'd end up always allocating 'ubi->dbg_peb_buf', which is rather large (128KiB or more), and this would be wasteful. Thus, we are just killing it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: allocate erase checking buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'ubi->dbg_peb_buf' buffer in 'ubi_dbg_check_all_ff()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'ubi->dbg_peb_buf' buffer completely. And the need for this arises because we want to change to dynamic debugging control instead of compile-time control, i.e., we are going to kill the CONFIG_MTD_UBI_DEBUG_PARANOID Kconfig option, which would mean that 'ubi->dbg_peb_buf' is always allocated, which would be wasteful. Thus, we are getting rid of 'ubi->dbg_peb_buf', and this is a preparation for that. signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBI: allocate write checking buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'ubi->dbg_peb_buf' buffer in 'ubi_dbg_check_write()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'ubi->dbg_peb_buf' buffer completely. And the need for this arises because we want to change to dynamic debugging control instead of compile-time control, i.e., we are going to kill the CONFIG_MTD_UBI_DEBUG_PARANOID Kconfig option, which would mean that 'ubi->dbg_peb_buf' is always allocated, which would be wasteful. Thus, we are getting rid of 'ubi->dbg_peb_buf', and this is a preparation for that. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16Merge branch 'for-2.6.39' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-03-16Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6Paul Mundt
2011-03-16fix follow_link() breakageAl Viro
commit 574197e0de46a8a4db5c54ef7b65e43ffa8873a7 had a missing piece, breaking the loop detection ;-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-16fbdev: sh_mobile_lcdc: Add YUV framebuffer supportDamian Hobson-Garcia
Supports YCbCr420sp, YCbCr422sp, and YCbCr44sp, formats (bpp = 12, 16, and 24) respectively. When double-buffering both Y planes appear before the C planes (Y-Y-C-C), as opposed to Y-C-Y-C. Set .nonstd in struct sh_mobile_lcdc_chan_cfg to enable YUV mode, and use .bpp to distiguish between the 3 modes. The value of .nonstd is copied to bits 16-31 of LDDFR in the LCDC and should be set accordingly. .nonstd must be set to 0 for RGB mode. Due to the encoding of YUV data, the framebuffer will clear to green instead of black. In YUV 420 mode, panning is only possible in 2 line increments. Additionally in YUV 420 mode the vertical resolution of the framebuffer must be an even number. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-16ALSA: ctxfi - use list_move() instead of list_del()/list_add() combinationKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-16ALSA: firewire - msleep needs delay.hStephen Rothwell
fixes this error: sound/firewire/fcp.c: In function 'fcp_avc_transaction': sound/firewire/fcp.c:103: error: implicit declaration of function 'msleep' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-15Input: tc3589x-keypad - fix 'double const' warningDmitry Torokhov
Also rearrange driver structure initializer a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Input: tca6416-keypad - suspend/resume wakeup supportMagnus Damm
Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake() in the suspend/resume hooks. This makes it possible to wake up from suspend-to-ram using a tca6416 key on the sh7372 mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86: Clean up apic.c and apic.h x86: Remove superflous goal definition of tsc_sync x86: dt: Correct local apic documentation in device tree bindings x86: dt: Cleanup local apic setup x86: dt: Fix OLPC=y/INTEL_CE=n build rtc: cmos: Add OF bindings x86: ce4100: Use OF to setup devices x86: ioapic: Add OF bindings for IO_APIC x86: dtb: Add generic bus probe x86: dtb: Add support for PCI devices backed by dtb nodes x86: dtb: Add device tree support for HPET x86: dtb: Add early parsing of IO_APIC x86: dtb: Add irq domain abstraction x86: dtb: Add a device tree for CE4100 x86: Add device tree support x86: e820: Remove conditional early mapping in parse_e820_ext x86: OLPC: Make OLPC=n build again x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection x86: OLPC: Cleanup config maze completely x86: OLPC: Hide OLPC_OPENFIRMWARE config switch ... Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
2011-03-15Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (93 commits) x86, tlb, UV: Do small micro-optimization for native_flush_tlb_others() x86-64, NUMA: Don't call numa_set_distanc() for all possible node combinations during emulation x86-64, NUMA: Don't assume phys node 0 is always online in numa_emulation() x86-64, NUMA: Clean up initmem_init() x86-64, NUMA: Fix numa_emulation code with node0 without RAM x86-64, NUMA: Revert NUMA affine page table allocation x86: Work around old gas bug x86-64, NUMA: Better explain numa_distance handling x86-64, NUMA: Fix distance table handling mm: Move early_node_map[] reverse scan helpers under HAVE_MEMBLOCK x86-64, NUMA: Fix size of numa_distance array x86: Rename e820_table_* to pgt_buf_* bootmem: Move __alloc_memory_core_early() to nobootmem.c bootmem: Move contig_page_data definition to bootmem.c/nobootmem.c bootmem: Separate out CONFIG_NO_BOOTMEM code into nobootmem.c x86-64, NUMA: Seperate out numa_alloc_distance() from numa_set_distance() x86-64, NUMA: Add proper function comments to global functions x86-64, NUMA: Move NUMA emulation into numa_emulation.c x86-64, NUMA: Prepare numa_emulation() for moving NUMA emulation into a separate file x86-64, NUMA: Do not scan two times for setup_node_bootmem() ... Fix up conflicts in arch/x86/kernel/smpboot.c
2011-03-15Merge branch 'x86-mem-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, mem: Convert memmove() to assembly file and fix return value bug
2011-03-15Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, microcode, AMD: Fix signedness bug in generic_load_microcode() x86, microcode, AMD: Extend ucode size verification x86, microcode, AMD: Cleanup dmesg output x86, microcode, AMD: Remove unneeded memset call x86, microcode, AMD: Simplify get_next_ucode x86, microcode, AMD: Simplify install_equiv_cpu_table x86, microcode, AMD: Release firmware on error x86, microcode: Correct sysdev_add error path
2011-03-15Merge branch 'um-irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'um-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Select GENERIC_HARDIRQS_NO_DEPRECATED um: Use proper accessors in show_interrupts() um: Convert irq_chips to new functions um: Remove stale irq_chip.end
2011-03-15xen network backend driverIan Campbell
netback is the host side counterpart to the frontend driver in drivers/net/xen-netfront.c. The PV protocol is also implemented by frontend drivers in other OSes too, such as the BSDs and even Windows. The patch is based on the driver from the xen.git pvops kernel tree but has been put through the checkpatch.pl wringer plus several manual cleanup passes and review iterations. The driver has been moved from drivers/xen/netback to drivers/net/xen-netback. One major change from xen.git is that the guest transmit path (i.e. what looks like receive to netback) has been significantly reworked to remove the dependency on the out of tree PageForeign page flag (a core kernel patch which enables a per page destructor callback on the final put_page). This page flag was used in order to implement a grant map based transmit path (where guest pages are mapped directly into SKB frags). Instead this version of netback uses grant copy operations into regular memory belonging to the backend domain. Reinstating the grant map functionality is something which I would like to revisit in the future. Note that this driver depends on 2e820f58f7ad "xen/irq: implement bind_interdomain_evtchn_to_irqhandler for backend drivers" which is in linux next via the "xen-two" tree and is intended for the 2.6.39 merge window: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git stable/backends this branch has only that single commit since 2.6.38-rc2 and is safe for cross merging into the net branch. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15Merge branch 'stable/backends' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
2011-03-15bonding: Improve syslog message at device creation timePhil Oester
When the bonding module is loaded, it creates bond0 by default. Then, when attempting to create bond0, the following messages are printed to syslog: kernel: bonding: bond0 is being created... kernel: bonding: Bond creation failed. Which seems to indicate a problem, when in reality there is no problem. Since the actual error code is passed down from bond_create, make use of it to print a bit less ominous message: kernel: bonding: bond0 is being created... kernel: bond0 already exists. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15bonding: Call netif_carrier_off after register_netdevicePhil Oester
Bringing up a bond interface with all network cables disconnected does not properly set the interface as DOWN because the call to netif_carrier_off occurs too early in bond_init. The call needs to occur after register_netdevice has set dev->reg_state to NETREG_REGISTERED, so that netif_carrier_off will trigger the call to linkwatch_fire_event. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15bonding: Incorrect TX queue offsetPhil Oester
When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 06:19:39 +0000