summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-14tcp_cubic: fix comparison of jiffiesstephen hemminger
Jiffies wraps around therefore the correct way to compare is to use cast to signed value. Note: cubic is not using full jiffies value on 64 bit arch because using full unsigned long makes struct bictcp grow too large for the available ca_priv area. Includes correction from Sangtae Ha to improve ack train detection. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp: fix RTT for quick packets in congestion controlstephen hemminger
In the congestion control interface, the callback for each ACK includes an estimated round trip time in microseconds. Some algorithms need high resolution (Vegas style) but most only need jiffie resolution. If RTT is not accurate (like a retransmission) -1 is used as a flag value. When doing coarse resolution if RTT is less than a a jiffie then 0 should be returned rather than no estimate. Otherwise algorithms that expect good ack's to trigger slow start (like CUBIC Hystart) will be confused. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14ftmac100: use GFP_ATOMIC allocations where neededEric Dumazet
When running in softirq context, we should use GFP_ATOMIC allocations instead of GFP_KERNEL ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14qeth: change some configurations defaultsFrank Blaschka
This patch turns on RX checksum and GRO by default. To improve receiving performance and reduce congestion in case of network bursts we also increase the default number of inbound buffers. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14bonding: documentation update: mailing lists.Nicolas de Pesloüan
In commit a6c36ee677607b02d8ecc88e8a12785418b88107 ("bonding: change list contact to netdev@vger.kernel.org"), the mailing list for bonding developpement was changed from bonding-devel to netdev. Update the bonding documentation to reflect this change: - bonding-devel is used for usage discussions (despite the name). - netdev is used for developpement discussions. Also remove the reference to the sourceforge bonding page, which is deprecated. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14Merge branch 'for-rmk-devel-stable' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2011-03-14Merge branch 'davinci-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
2011-03-14NFS: Fix a warning in fs/nfs/idmap.cTrond Myklebust
Commit 45a52a02072b2a7e265f024cfdb00127e08dd9f2 (NFS move nfs_client initialization into nfs_get_client) introduces a new warning in fs/nfs/idmap.c: ‘struct rpc_timeout’ declared inside parameter list Fix it by adding a forward declaration for the struct rpc_timeout in include/linux/nfs_xdr.h Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-14af_unix: update locking commentDaniel Baluta
We latch our state using a spinlock not a r/w kind of lock. Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14NET: cdc-phonet, handle empty phonet headerJiri Slaby
Currently, for N 5800 XM I get: cdc_phonet: probe of 1-6:1.10 failed with error -22 It's because phonet_header is empty. Extra altsetting looks like there: E 05 24 00 01 10 03 24 ab 05 24 06 0a 0b 04 24 fd .$....$..$....$. E 00 . I don't see the header used anywhere so just check if the phonet descriptor is there, not the structure itself. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14NET: cdc-phonet, fix stop-queue handlingJiri Slaby
Currently there is a warning emitted by the cdc-phonet driver: WARNING: at include/linux/netdevice.h:1557 usbpn_probe+0x3bb/0x3f0 [cdc_phonet]() Modules linked in: ... Pid: 5877, comm: insmod Not tainted 2.6.37.3-16-desktop #1 Call Trace: [<ffffffff810059b9>] dump_trace+0x79/0x340 [<ffffffff81520fdc>] dump_stack+0x69/0x6f [<ffffffff810580eb>] warn_slowpath_common+0x7b/0xc0 [<ffffffffa00254fb>] usbpn_probe+0x3bb/0x3f0 [cdc_phonet] ... ---[ end trace f5d3e02908603ab4 ]--- netif_stop_queue() cannot be called before register_netdev() So remove netif_stop_queue from the probe funtction to avoid that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: MN10300: atomic_read() should ensure it emits a load MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist MN10300: Proper use of macros get_user() in the case of incremented pointers
2011-03-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Alchemy: Fix reset for MTX-1 and XXS1500 MIPS: MTX-1: Make au1000_eth probe all PHY addresses MIPS: Jz4740: Add HAVE_CLK MIPS: Move idle task creation to work queue MIPS, Perf-events: Use unsigned delta for right shift in event update MIPS, Perf-events: Work with the new callchain interface MIPS, Perf-events: Fix event check in validate_event() MIPS, Perf-events: Work with the new PMU interface MIPS, Perf-events: Work with irq_work MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y MIPS: Loongson: Fix potentially wrong string handling MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h MIPS: Remove unused code from arch/mips/kernel/syscall.c MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c MIPS: MSP: Fix MSP71xx bpci interrupt handler return value MIPS: Select R4K timer lib for all MSP platforms MIPS: Loongson: Remove ad-hoc cmdline default MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...). MIPS: Add an unreachable return statement to satisfy buggy GCCs. ...
2011-03-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14be2net: changes for BE3 native mode supportSathya Perla
So far be2net has been using BE3 in legacy mode. It now checks for native mode capability and if available it sets it. In native mode, the RX_COMPL structure is different from that in legacy mode. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14Revert "oom: oom_kill_process: fix the child_points logic"Linus Torvalds
This reverts the parent commit. I hate doing that, but it's generating some discussion ("half of it is right"), and since I am planning on doing the 2.6.38 release later today we can punt it to stable if required. Let's not rock the boat right now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14netxen: Notify firmware of Flex-10 interface downSony Chacko
Notify firmware when a Flex-10 interface is brought down so that virtual connect manager can display the correct link status. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14xen: netfront: ethtool stats fields should be unsigned longIan Campbell
Fixup the rx_gso_checksum_fixup field added in e0ce4af920eb to be unsigned long as suggested by Ben Hutchings in <1298919198.2569.14.camel@bwh-desktop> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14bridge: skip forwarding delay if not using STPstephen hemminger
If Spanning Tree Protocol is not enabled, there is no good reason for the bridge code to wait for the forwarding delay period before enabling the link. The purpose of the forwarding delay is to allow STP to learn about other bridges before nominating itself. The only possible impact is that when starting up a new port the bridge may flood a packet now, where previously it might have seen traffic from the other host and preseeded the forwarding table. Includes change for local variable br already available in that func. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14Davinci: Do not reset EMAC TX overruns counter on readThomas Lange
Don't reset tx_fifo_errors when reading out current EMAC stats. (tx_fifo_errors shows up as TX overruns in netdev stats.) Without this correction, the old counter value is lost every time stats are read out. Signed-off-by: Thomas Lange <thomas@corelatus.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14phylib: SIOCGMIIREG/SIOCSMIIREG: allow access to all mdio addressesPeter Korsgaard
phylib would silently ignore the phy_id argument to these ioctls and perform the read/write with the active phydev address, whereas most non-phylib drivers seem to allow access to all mdio addresses (E.G. pcnet_cs). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14bnx2: Update firmware and versionMichael Chan
Update 5709 mips firmware to 6.2.1a to fix iSCSI performance regression. There was an unnecessary context read in the fast path affecting performance. Update bnx2 to 2.1.6. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14enic: Support newer version of firmware devcmd CMD_MCPU_FW_INFOVasanthy Kolluri
This patch provides support to the newer version of firmware devcmd CMD_MCPU_FW_INFO that returns additional information (ASIC type and revision) about the underlying hardware. This knowledge is required by the driver to implement any hardware specific features. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14can: wrong index used in inner looproel kluin
Index i was already used in the outer loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14bridge: control carrier based on ports onlinestephen hemminger
This makes the bridge device behave like a physical device. In earlier releases the bridge always asserted carrier. This changes the behavior so that bridge device carrier is on only if one or more ports are in the forwarding state. This should help IPv6 autoconfiguration, DHCP, and routing daemons. I did brief testing with Network and Virt manager and they seem fine, but since this changes behavior of bridge, it should wait until net-next (2.6.39). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Tested-By: Adam Majer <adamm@zombino.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14IB/ipath: Don't reset disabled devicesNicolas Kaiser
The comment some lines above states that disabled devices must not reset. Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
2011-03-14drivers/net: fix build warnings with CONFIG_PM_SLEEP disabledMichel Lespinasse
This fixes a couple of build warnings when CONFIG_PM is enabled but CONFIG_PM_SLEEP is disabled. Applies on top of v2.6.38-rc7 - I know it's late, but it would be great if v2.6.38 could compile without warnings! Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: add set_mdio_gate in bb_infoYoshihiro Shimoda
The SH7757's ETHER and GETHER use common MDIO pin. The MDIO pin is selected by specific register. So this patch adds new interface in bb_info, and when the sh_eth driver use the mdio, the register can be changed by the function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: add support for SH7757's GETHERYoshihiro Shimoda
The SH7757 have GETHER and ETHER both. This patch supports them. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: modify the PHY_INTERFACE_MODEYoshihiro Shimoda
The previous code had hardcoded the PHY_INTERFACE_MODE_MII of phy_connect. So some Gigabit PHYs will not behave correctly. The patch adds the phy_interface in sh_eth_plat_data, so we can select the phy interface. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: remove almost #ifdef of SH7763Yoshihiro Shimoda
The SH7763 has GETHER. So the specification of some registers differs than other CPUs. This patch removes almost #ifdef of CONFIG_CPU_SUBTYPE_SH7763. Then we are able to add other CPU's GETHER easily. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: remove the SH_TSU_ADDRYoshihiro Shimoda
The defination is hardcoded in this driver for some CPUs. This patch modifies to get resource of TSU address from platform_device. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14net: sh_eth: modify the definitions of registerYoshihiro Shimoda
The previous code cannot handle the ETHER and GETHER both as same time because the definitions of register was hardcoded. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14Merge branch 'tipc-Mar14-2011' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/net-next-2.6
2011-03-14pktgen: bug fix in transmission headers with frags=0Daniel Turull
(bug introduced by commit 26ad787962ef84677a48c560 (pktgen: speedup fragmented skbs) The headers of pktgen were incorrectly added in a pktgen packet without frags (frags=0). There was an offset in the pktgen headers. The cause was in reusing the pgh variable as a return variable in skb_put when adding the payload to the skb. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-03-14bnx2x: fix swap of rx-ticks and tx-ticks parameters in interrupt coalescing flowAriel Elior
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14oom: oom_kill_process: fix the child_points logicOleg Nesterov
oom_kill_process() starts with victim_points == 0. This means that (most likely) any child has more points and can be killed erroneously. Also, "children has a different mm" doesn't match the reality, we should check child->mm != t->mm. This check is not exactly correct if t->mm == NULL but this doesn't really matter, oom_kill_task() will kill them anyway. Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14arm: Remove bogus comment in futex_atomic_cmpxchg_inatomic()Thomas Gleixner
commit 522d7dec(futex: Remove redundant pagefault_disable in futex_atomic_cmpxchg_inatomic()) added a bogus comment. /* Note that preemption is disabled by futex_atomic_cmpxchg_inatomic * call sites. */ Bogus in two aspects: 1) pagefault_disable != preempt_disable even if the mechanism we use is the same 2) we have a call site which deliberately does not disable pagefaults as it wants the possible fault to be handled - though that has been changed for consistency reasons now. Sigh. I really should have seen that when committing the above. :( Catched-by-and-rightfully-ranted-at-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <alpine.LFD.2.00.1103141126590.2787@localhost6.localdomain6> Cc: Michel Lespinasse <walken@google.com> Cc: Darren Hart <darren@dvhart.com>
2011-03-14futex: Deobfuscate handle_futex_death()Thomas Gleixner
handle_futex_death() uses futex_atomic_cmpxchg_inatomic() without disabling page faults. That's ok, but totally non obvious. We don't hold locks so we actually can and want to fault here, because the get_user() before futex_atomic_cmpxchg_inatomic() does not guarantee a R/W mapping. We could just add a big fat comment to explain this, but actually changing the code so that the functionality is entirely clear is better. Use the helper function which disables page faults around the futex_atomic_cmpxchg_inatomic() and handle a fault with a call to fault_in_user_writeable() as all other places in the futex code do as well. Pointed-out-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Darren Hart <darren@dvhart.com> Cc: Michel Lespinasse <walken@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> LKML-Reference: <alpine.LFD.2.00.1103141126590.2787@localhost6.localdomain6> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-14MIPS: Alchemy: Fix reset for MTX-1 and XXS1500Florian Fainelli
Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c) Alchemy-based boards use their own reset function. For MTX-1 and XXS1500, the reset function pokes at the BCSR.SYSTEM_RESET register, but this does not work. According to Bruno Randolf, this was not tested when written. Previously, the generic au1000_restart() routine called the board specific reset function, which for MTX-1 and XXS1500 did not work, but finally made a jump to the reset vector, which really triggers a system restart. Fix reboot for both targets by jumping to the reset vector. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2093/ Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: MTX-1: Make au1000_eth probe all PHY addressesFlorian Fainelli
When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2111/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Jz4740: Add HAVE_CLKMaurus Cuelenaere
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined, so define it! Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2112/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Move idle task creation to work queueMaksim Rayskiy
To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Use unsigned delta for right shift in event updateDeng-Cheng Zhu
Leverage the commit for ARM by Will Deacon: - 446a5a8b1eb91a6990e5c8fe29f14e7a95b69132 ARM: 6205/1: perf: ensure counter delta is treated as unsigned Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2015/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new callchain interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Fix event check in validate_event()Deng-Cheng Zhu
Ignore events that are in off/error state or belong to a different PMU. This patch originates from the following commit for ARM by Will Deacon: - 65b4711ff513767341aa1915c822de6ec0de65cb ARM: 6352/1: perf: fix event validation The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new PMU interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with irq_workDeng-Cheng Zhu
This is the MIPS part of the following commit by Peter Zijlstra: - e360adbe29241a0194e10e20595360dd7b98a2b3 irq_work: Add generic hardirq context callbacks Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ handler as described above. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com, Patchwork: http://patchwork.linux-mips.org/patch/2011/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix always CONFIG_LOONGSON_UART_BASE=yYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2055/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Fix potentially wrong string handlingStefan Weil
This error was reported by cppcheck: arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it) If strncpy copied MACHTYPE_LEN bytes, the destination string str was not terminated. The patch adds one more byte to str and makes sure that this byte is always 0. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2053/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit (git 2.34.1) at 2025-09-22 12:05:56 +0000