summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-24MIPS: Fix MSA asm warnings in control reg accessorsJames Hogan
Building an MSA capable kernel with a toolchain that supports MSA produces warnings such as this: CC arch/mips/kernel/cpu-probe.o {standard input}: Assembler messages: {standard input}:4786: Warning: the `msa' extension requires 64-bit FPRs This is due to ".set msa" without ".set fp=64" in the inline assembly of control register accessors, since MSA requires the 64-bit FPU registers (FR=1). Add the missing fp=64 in these functions to silence the warnings. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13554/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MAINTAINERS: Add pistachio SoC SupportJames Hartley
The Pistachio SoC from Imagination Technologies currently has no entry in the MAINTAINERS file, so add one. Signed-off-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: davem@davemloft.net Cc: geert@linux-m68k.org Cc: gregkh@linuxfoundation.org Cc: akpm@linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: ionela.voinescu@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/13755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Pistachio: Remove plat_setup_iocoherencyZubair Lutfullah Kakakhel
The Pistachio SoC does not have an IOCU. Hence, DMA is non-coherent. Remove the function checking for iocoherency and select CONFIG_DMA_NONCOHERENT in Kconfig This code is probably accidentally inherited from Malta. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Lantiq: Register IRQ handler for virtual IRQ numberHauke Mehrtens
We used the hardware IRQ number to register the IRQ handler and not the virtual one. This probably caused some problems because the hardware IRQ numbers are only unique for each IRQ controller and not in the system. The virtual IRQ number is managed by Linux and unique in the system. This was probably the reason there was a gab of 8 IRQ numbers added before the numbers used for the lantiq IRQ controller. With the current setup the hardware and the virtual IRQ numbers are the same. Reported-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Cc: thomas.langer@intel.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13539/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Delete use of ARCH_WANT_OPTIONAL_GPIOLIBLinus Walleij
The Loongson1 added a new instance of ARCH_WANT_OPTIONAL_GPIOLIB which is no longer required to have GPIOLIB available in Kconfig. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Lantiq: Use the real EXIN countJohn Crispin
We runtime load the available external interrupts into an array and store the number inside exin_avail. Some of the code however uses MAX_EIU for looping over the array which may partially be 0. This is a cosmetic fix as the existing code works as is. It is just nicer to only loop over the array elements that were actually populated during probe. Signed-off-by: John Crispin <john@phrozen.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13602/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Lantiq: Fix eiu interrupt loading codeJohn Crispin
Using of_irq_count to load the irq index from the devicetree is incorrect. This will cause the kernel to map them regardless, even if they dont actually get used. Change the code to use of_property_count_u32_elems() instead which is the correct API to use in this case. Signed-off-by: John Crispin <john@phrozen.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13601/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Lantiq: Fix eiu interrupt loading codeJohn Crispin
Using of_irq_count to load the irq index from the devicetree is incorrect. This will cause the kernel to map them regardless, even if they dont actually get used. Change the code to use of_property_count_u32_elems() instead which is the correct API to use in this case. Signed-off-by: John Crispin <john@phrozen.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13601/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Move CPU Hotplug config option into submenuMatt Redfearn
The KConfig option HOTPLUG_CPU should appear in the "Kernel Type" submenu. Relocate it to where SMP support is configured. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processorsMatt Redfearn
Introduce support for hotplug of Virtual Processors in MIPSr6 systems. The method is simpler than the VPE parallel from the now-deprecated MT ASE, it can now simply write the VP_STOP register with the mask of VPs to halt, and use the VP_RUNNING register to determine when the VP has halted. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: smp-cps: Allow booting of CPU other than VP0 within a coreMatt Redfearn
The boot_core function was hardcoded to always start VP0 when starting a core via the CPC. When hotplugging a CPU this may not be the desired behaviour. Make boot_core receive the VP ID to start running on the core, such that alternate VPs can be started via CPU hotplug. Also ensure that all other VPs within the core are stopped before bringing the core out of reset so that only the desired VP starts. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: hpet: Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLESHuacai Chen
At first, we prefer to use mips clockevent device, so we decrease the rating of hpet clockevent device. For hpet, if HPET_MIN_PROG_DELTA (minimum delta of hpet programming) is too small and HPET_MIN_CYCLES (threshold of -ETIME checking) is too large, then hpet_next_event() can easily return -ETIME. After commit c6eb3f70d44828 ("hrtimer: Get rid of hrtimer softirq") this will cause a RCU stall. So, HPET_MIN_PROG_DELTA must be sufficient that we don't re-trip the -ETIME check -- if we do, we will return -ETIME, forward the next event time, try to set it, return -ETIME again, and basically lock the system up. Meanwhile, HPET_MIN_CYCLES doesn't need to be too large, 16 cycles is enough. This solution is similar to commit f9eccf24615672 ("clocksource/drivers /vt8500: Increase the minimum delta"). By the way, this patch ensures hpet count/compare to be 32-bit long. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Don't register r4k sched clock when CPUFREQ enabledHuacai Chen
Don't register r4k sched clock when CPUFREQ enabled because sched clock need a constant frequency. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24MIPS: Fix r4k clockevents registrationHuacai Chen
CPUFreq need min_delta_ticks/max_delta_ticks to be initialized, and this can be done by clockevents_config_and_register(). Cc: stable@vger.kernel.org Signed-off-by: Heiher <r@hev.cc> Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-24KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototypeMarc Zyngier
kvm_set_routing_entry is changing in -next, and causes things to explode. Add a temporary workaround that should be dropped when we hit 4.8-rc1 Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-23target: fix spelling mistake: "limitiation" -> "limitation"Colin Ian King
trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-07-23target: Fix residual overflow handling in target_complete_cmd_with_lengthSumit Rai
This patch fixes residual overflow handling to correctly set the residual_count using SPDTL, instead of SCSI Allocation Length. Allocation Length is the maximum value of the SPDTL and not substitute for it, hence it shouldn’t be used to calculate ResidualCount except for cases where SPDTL > Allocation Length and Data is truncated (in that case both Alloc Len and SPDTL are same). (SPC 5r01 Section 4.2.5.6). Thanks to Ajay Nair in assisting with this patch. Signed-off-by: Sumit Rai <sumitrai96@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-07-24dmaengine: k3dma: add missing clk_disable_unprepare() on error in k3_dma_probe()Wei Yongjun
Add the missing clk_disable_unprepare() before return from k3_dma_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-24dmaengine: zynqmp_dma: add missing MODULE_LICENSEArnd Bergmann
We get a warning about the missing MODULE_LICENSE tag for this newly added driver module: WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o see include/linux/module.h for more information This adds a "GPL" license, matching the "version 2 or later" information in the comment at the start of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-24dmaengine: qcom_hidma: use for_each_matching_node() macroWei Yongjun
Use for_each_matching_node() macro instead of open coding it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-24dmaengine: zynqmp_dma: Fix static checker warningKedareswara rao Appana
This patch fixes the below static checker warning drivers/dma/xilinx/zynqmp_dma.c:973 zynqmp_dma_chan_probe() warn: was && intended here instead of ||? Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-24dmaengine: omap-dma: Support for interleaved transferPeter Ujfalusi
Initial support for interleaved transfer with sDMA. The implementation only supports DMA_MEM_TO_MEM and frame_size must be 1. sDMA needs to be configured for double indexing when ICG is needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-23nfit, libnvdimm: allow an ARS scrub to be triggered on demandVishal Verma
Normally, an ARS (Address Range Scrub) only happens at boot/initialization time. There can however arise situations where a bus-wide rescan is needed - notably, in the case of discovering a latent media error, we should do a full rescan to figure out what other sectors are bad, and thus potentially avoid triggering an mce on them in the future. Also provide a sysfs trigger to start a bus-wide scrub. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A fix for a long-standing bug in the incremental osdmap handling code that caused misdirected requests, tagged for stable" The tag is signed with a brand new key - Sage is on vacation and I didn't anticipate this" * tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client: libceph: apply new_state before new_up_client on incrementals
2016-07-23Documentation: i2c: slave: give proper example for pm usageWolfram Sang
pm_runtime_forbid was the wrong knob, this is the better one. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-23Documentation: i2c: slave: describe buffer problems a bit betterWolfram Sang
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-23fs: Call d_automount with the filesystems credsEric W. Biederman
Seth Forshee reported a mount regression in nfs autmounts with "fs: Add user namespace member to struct super_block". It turns out that the assumption that current->cred is something reasonable during mount while necessary to improve support of unprivileged mounts is wrong in the automount path. To fix the existing filesystems override current->cred with the init_cred before calling d_automount and restore current->cred after d_automount completes. To support unprivileged mounts would require a more nuanced cred selection, so fail on unprivileged mounts for the time being. As none of the filesystems that currently set FS_USERNS_MOUNT implement d_automount this check is only good for preventing future problems. Fixes: 6e4eab577a0c ("fs: Add user namespace member to struct super_block") Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-07-23x86/mm/cpa: Add missing comment in populate_pdg()Andy Lutomirski
In commit: 21cbc2822aa1 ("x86/mm/cpa: Unbreak populate_pgd(): stop trying to deallocate failed PUDs") I intended to add this comment, but I failed at using git. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/242baf8612394f4e31216f96d13c4d2e9b90d1b7.1469293159.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-23x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDsAndy Lutomirski
Valdis Kletnieks bisected a boot failure back to this recent commit: 360cb4d15567 ("x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated") I broke the case where a PUD table got allocated -- populate_pud() would wander off a pgd_none entry and get lost. I'm not sure how this survived my testing. Fix the original issue in a much simpler way. The problem was that, if we allocated a PUD table, failed to populate it, and freed it, another CPU could potentially keep using the PGD entry we installed (either by copying it via vmalloc_fault or by speculatively caching it). There's a straightforward fix: simply leave the top-level entry in place if this happens. This can't waste any significant amount of memory -- there are at most 256 entries like this systemwide and, as a practical matter, if we hit this failure path repeatedly, we're likely to reuse the same page anyway. For context, this is a reversion with this hunk added in: if (ret < 0) { + /* + * Leave the PUD page in place in case some other CPU or thread + * already found it, but remove any useless entries we just + * added to it. + */ - unmap_pgd_range(cpa->pgd, addr, + unmap_pud_range(pgd_entry, addr, addr + (cpa->numpages << PAGE_SHIFT)); return ret; } This effectively open-codes what the now-deleted unmap_pgd_range() function used to do except that unmap_pgd_range() used to try to free the page as well. Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/21cbc2822aa18aa812c0215f4231dbf5f65afa7f.1469249789.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-23libnvdimm: register nvdimm_bus devices with an nd_bus driverDan Williams
A recent effort to add a new nvdimm bus provider attribute highlighted a race between interrogating nvdimm_bus->nd_desc and nvdimm_bus tear down. The typical way to handle these races is to take the device_lock() in the attribute method and validate that the device is still active. In order for a device to be 'active' it needs to be associated with a driver. So, we create the small boilerplate for a driver and register nvdimm_bus devices on the 'nvdimm_bus_type' bus. A result of this change is that ndbusX devices now appear under /sys/bus/nd/devices. In fact this makes /sys/class/nd somewhat redundant, but removing that will need to take a long deprecation period given its use by ndctl binaries in the field. This change naturally pulls code from drivers/nvdimm/core.c to drivers/nvdimm/bus.c, so it is a nice code organization clean-up as well. Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23pmem: clarify a debug print in pmem_clear_poisonVishal Verma
Prefix the sector number being cleared with a '0x' to make it clear that this is a hex value. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23x86/insn: remove pcommitDan Williams
The pcommit instruction is being deprecated in favor of either ADR (asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM Firmware Interface Table). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23Revert "KVM: x86: add pcommit support"Dan Williams
This reverts commit 8b3e34e46aca9b6d349b331cd9cf71ccbdc91b2e. Given the deprecation of the pcommit instruction, the relevant VMX features and CPUID bits are not going to be rolled into the SDM. Remove their usage from KVM. Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23arm64: KVM: VHE: Context switch MDSCR_EL1Marc Zyngier
The kprobe enablement work has uncovered that changes made by a guest to MDSCR_EL1 were propagated to the host when VHE was enabled, leading to unexpected exception being delivered. Moving this register to the list of registers that are always context-switched fixes the issue. Fixes: 9c6c35683286 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host") Cc: stable@vger.kernel.org #4.6 Reported-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com> Tested-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-07-23[media] cx23885-cardlist.rst: add a new cardMauro Carvalho Chehab
add card Hauppauge WinTV-QuadHD-DVB to the list. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] doc-rst: add some needed escape codesMauro Carvalho Chehab
Some extra escape codes are needed to avoid Sphinx to not identify the tags. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] doc-rst: kapi: use :c:func: instead of :cpp:funcMauro Carvalho Chehab
References at the rst files for C functions generated via kernel-doc should use :c:func:. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23doc-rst: kernel-doc: fix a change introduced by mistakeMauro Carvalho Chehab
changeset b7e67f6c1bf7 ("doc-rst: linux_tv: supress lots of warnings") were meant to touch only on media files, but it also touched at this script by mistake. Revert such change. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_opsMauro Carvalho Chehab
This struct is mentioned at the kAPI docbook. So, let's document it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] dvb_ringbuffer.h: some documentation improvementsMauro Carvalho Chehab
Better document a note on this header. While here, better format dvb_ringbuffer_pkt_read_user() to adjust it to CodingStyle. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-ctrls.h: fully document the header fileMauro Carvalho Chehab
There are lots of undocumented stuff on this header. Document them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] doc-rst: Fix some typedef ugly warningsMauro Carvalho Chehab
Sphinx can't handle well typedefs. Change two typedef occurrences, in order to cleanup some of such warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] doc-rst: reorganize the kAPI v4l2 chaptersMauro Carvalho Chehab
Reorganize the order of the document, putting the chapters on a more logical order and renaming some sections. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] rename v4l2-framework.rst to v4l2-intro.rstMauro Carvalho Chehab
Now that the only remaining chapters at v4l2-framework are the introduction ones, let' s rename the file. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] move V4L2 clocks to a separate .rst fileMauro Carvalho Chehab
Move the v4l2 clocks stuff from v4l2-framework to a separate file and adds an attention that came from the v4l2-clk.h. Note: as this is meant to be a temporary kAPI, and it is used only by two drivers (soc_camera and em28xx), where the first one is in deprecation process, it probably not a worth effort to document its header. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-fh.rst: add cross references and markupsMauro Carvalho Chehab
Add cross-references with the kernel-doc functions/structs and improve the markups. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-fh.rst: add fh contents from v4l2-framework.rstMauro Carvalho Chehab
Move the v4l2_fh specific content from v4l2-framework.rst to v4l2-fh.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-fh.h: add documentation for itMauro Carvalho Chehab
This header file was undocumented. Add documentation for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23[media] v4l2-event.rst: add cross-references and markupsMauro Carvalho Chehab
Improve events documentation by adding cross references, sub-titles and other markup elements. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-09-22 10:08:16 +0000