summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-22dt-bindings: net: dsa: Let dsa.txt refer to dsa.yamlKurt Kanzenbach
The DSA bindings have been converted to YAML. Therefore, the old text style documentation should refer to that one. The text file can be removed completely once all the existing DSA switch bindings have been converted as well. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22dt-bindings: net: dsa: Add DSA yaml bindingKurt Kanzenbach
For future DSA drivers it makes sense to add a generic DSA yaml binding which can be used then. This was created using the properties from dsa.txt. It includes the ports and the dsa,member property. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23Merge tag 'efi-urgent-for-v5.8-rc4' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent Pull EFI fixes from Ard Biesheuvel: - Fix the layering violation in the use of the EFI runtime services availability mask in users of the 'efivars' abstraction - Revert build fix for GCC v4.8 which is no longer supported - Some fixes for build issues found by Atish while working on RISC-V support - Avoid --whole-archive when linking the stub on arm64 - Some x86 EFI stub cleanups from Arvind
2020-07-22x86/dumpstack: Dump user space code correctly againThomas Gleixner
H.J. reported that post 5.7 a segfault of a user space task does not longer dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It prints 'Code: Bad RIP value.' instead. This was broken by a recent change which made probe_kernel_read() reject non-kernel addresses. Update show_opcodes() so it retrieves user space opcodes via copy_from_user_nmi(). Fixes: 98a23609b103 ("maccess: always use strict semantics for probe_kernel_read") Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87h7tz306w.fsf@nanos.tec.linutronix.de
2020-07-22x86/stacktrace: Fix reliable check for empty user task stacksJosh Poimboeuf
If a user task's stack is empty, or if it only has user regs, ORC reports it as a reliable empty stack. But arch_stack_walk_reliable() incorrectly treats it as unreliable. That happens because the only success path for user tasks is inside the loop, which only iterates on non-empty stacks. Generally, a user task must end in a user regs frame, but an empty stack is an exception to that rule. Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in __unwind_start()"), unwind_start() now sets state->error appropriately. So now for both ORC and FP unwinders, unwind_done() and !unwind_error() always means the end of the stack was successfully reached. So the success path for kthreads is no longer needed -- it can also be used for empty user tasks. Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
2020-07-22x86/unwind/orc: Fix ORC for newly forked tasksJosh Poimboeuf
The ORC unwinder fails to unwind newly forked tasks which haven't yet run on the CPU. It correctly reads the 'ret_from_fork' instruction pointer from the stack, but it incorrectly interprets that value as a call stack address rather than a "signal" one, so the address gets incorrectly decremented in the call to orc_find(), resulting in bad ORC data. Fix it by forcing 'ret_from_fork' frames to be signal frames. Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
2020-07-22nfsd4: fix NULL dereference in nfsd/clients display codeJ. Bruce Fields
We hold the cl_lock here, and that's enough to keep stateid's from going away, but it's not enough to prevent the files they point to from going away. Take fi_lock and a reference and check for NULL, as we do in other code. Reported-by: NeilBrown <neilb@suse.de> Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens") Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-07-22net: mscc: ocelot: fix non-initialized CPU port on VSC7514Vladimir Oltean
The VSC7514 is marketed as a 10-port switch, however it has 11 physical ports (0->10) in the block diagram: https://www.microsemi.com/product-directory/ethernet-switches/3992-vsc7514 (also in the device tree at arch/mips/boot/dts/mscc/ocelot.dtsi) Additionally, by architecture it has one more entry in the analyzer block, situated right after the physical ports, for the CPU port module. This is not a physical port, it only represents a channel for frame injection and extraction. That entry for the CPU port is at index 11 in the analyzer. When the register groups for QSYS_SWITCH_PORT_MODE, SYS_PORT_MODE and SYS_PAUSE_CFG are declared to be replicated 11 times, the 11th entry in the array of regfields is not initialized, so the CPU port module is not initialized either. The documentation of QSYS_SWITCH_PORT_MODE for VSC7514 also says that this register group is replicated 12 times, so this patch is simply reflecting that and not introducing any further inconsistency. Fixes: 886e1387c73d ("net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields") Fixes: 541132f0961a ("net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield") Reported-by: Bryan Whitehead <bryan.whitehead@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: explicitly include <linux/compat.h> in net/core/sock.cChristoph Hellwig
The buildbot found a config where the header isn't already implicitly pulled in, so add an explicit include as well. Fixes: 8c918ffbbad4 ("net: remove compat_sock_common_{get,set}sockopt") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge tag 'imx-fixes-5.8-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 3: - A couple of FEC2 phy-mode fixes on imx6sx-sabreauto and imx6sx-sdb board. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. * tag 'imx-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 Link: https://lore.kernel.org/r/20200720040148.GA20462@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'sunxi-fixes-for-5.8-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6. * tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 46 non-merge commits during the last 6 day(s) which contain a total of 68 files changed, 4929 insertions(+), 526 deletions(-). The main changes are: 1) Run BPF program on socket lookup, from Jakub. 2) Introduce cpumap, from Lorenzo. 3) s390 JIT fixes, from Ilya. 4) teach riscv JIT to emit compressed insns, from Luke. 5) use build time computed BTF ids in bpf iter, from Yonghong. ==================== Purely independent overlapping changes in both filter.h and xdp.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge tag 'media/v5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the upcoming atomisp driver. They solve issues when probing atomisp on devices with multiple cameras and get rid of warnings when built with W=1. The diffstat is a bit long, as this driver has several abstractions. The patches that solved the issues with W=1 had to get rid of some duplicated code (there used to have 2 versions of the same code, one for ISP2401 and another one for ISP2400). As this driver is not in 5.7, such changes won't cause regressions" * tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits) Revert "media: atomisp: keep the ISP powered on when setting it" media: atomisp: fix mask and shift operation on ISPSSPM0 media: atomisp: move system_local consts into a C file media: atomisp: get rid of version-specific system_local.h media: atomisp: move global stuff into a common header media: atomisp: remove non-used 32-bits consts at system_local media: atomisp: get rid of some unused static vars media: atomisp: Fix error code in ov5693_probe() media: atomisp: Replace trace_printk by pr_info media: atomisp: Fix __func__ style warnings media: atomisp: fix help message for ISP2401 selection media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue. media: atomisp: make const arrays static, makes object smaller media: atomisp: Clean up non-existing folders from Makefile media: atomisp: Get rid of ACPI specifics in gmin_subdev_add() media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() media: atomisp: Use temporary variable for device in gmin_subdev_add() media: atomisp: Refactor PMIC detection to a separate function media: atomisp: Deduplicate return ret in gmin_i2c_write() media: atomisp: Make pointer to PMIC client global ...
2020-07-22Merge tag 'exfat-for-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat into master Pull exfat fixes from Namjae Jeon: - fix overflow issue at sector calculation - fix wrong hint_stat initialization - fix wrong size update of stream entry - fix endianness of upname in name_hash computation * tag 'exfat-for-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix name_hash computation on big endian systems exfat: fix wrong size update of stream entry by typo exfat: fix wrong hint_stat initialization in exfat_find_dir_entry() exfat: fix overflow issue in exfat_cluster_to_sector()
2020-07-22staging: wlan-ng: properly check endpoint typesRustam Kovhaev
As syzkaller detected, wlan-ng driver does not do sanity check of endpoints in prism2sta_probe_usb(), add check for xfer direction and type Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723 Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"Bjorn Helgaas
This reverts commit ec411e02b7a2e785a4ed9ed283207cd14f48699d. Patrick reported that this commit broke hybrid graphics on a ThinkPad X1 Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile: nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000 Karol reported that this commit broke Nouveau firmware loading on a Lenovo P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]: nouveau 0000:01:00.0: acr: AHESASC binary failed In both cases, reverting ec411e02b7a2 solved the problem. Unfortunately, this revert will reintroduce the "Thunderbolt bridges take long time to resume from D3cold" problem: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JDA@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597 Reported-by: Patrick Volkerding <volkerdi@gmail.com> Reported-by: Karol Herbst <kherbst@redhat.com> Fixes: ec411e02b7a2 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22virtio-mmio: Reject invalid IRQ 0 command line argumentBjorn Helgaas
The "virtio_mmio.device=" command line argument allows a user to specify the size, address, and IRQ of a virtio device. Previously the only requirement for the IRQ was that it be an unsigned integer. Zero is an unsigned integer but an invalid IRQ number, and after a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid"), attempts to use IRQ 0 cause warnings. If the user specifies IRQ 0, return failure instead of registering a device with IRQ 0. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-22iommu/qcom: Use domain rather than dev as tlb cookieRob Clark
The device may be torn down, but the domain should still be valid. Lets use that as the tlb flush ops cookie. Fixes a problem reported in [1] [1] https://lkml.org/lkml/2020/7/20/104 Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 09b5dfff9ad6 ("iommu/qcom: Use accessor functions for iommu private data") Link: https://lore.kernel.org/r/20200720155217.274994-1-robdclark@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-07-22MAINTAINERS: add Matthew for s390 IOMMUGerald Schaefer
Acked-By: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-22af_key: pfkey_dump needs parameter validationMark Salyzyn
In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range. Signed-off-by: Mark Salyzyn <salyzyn@android.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-team@android.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-22MAINTAINERS: i2c: at91: handover maintenance to Codrin CiubotariuLudovic Desroches
My colleague Codrin Ciubotariu, now, maintains this driver internally. Then I handover the mainline maintenance to him. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-22i2c: drop duplicated word in the header fileRandy Dunlap
Drop the doubled word "be" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-22i2c: cadence: Clear HOLD bit at correct time in Rx pathRaviteja Narayanam
There are few issues on Zynq SOC observed in the stress tests causing timeout errors. Even though all the data is received, timeout error is thrown. This is due to an IP bug in which the COMP bit in ISR is not set at end of transfer and completion interrupt is not generated. This bug is seen on Zynq platforms when the following condition occurs: Master read & HOLD bit set & Transfer size register reaches '0'. One workaround is to clear the HOLD bit before the transfer size register reaches '0'. The current implementation checks for this at the start of the loop and also only for less than FIFO DEPTH case (ignoring the equal to case). So clear the HOLD bit when the data yet to receive is less than or equal to the FIFO DEPTH. This avoids the IP bug condition. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-22Revert "i2c: cadence: Fix the hold bit setting"Raviteja Narayanam
This reverts commit d358def706880defa4c9e87381c5bf086a97d5f9. There are two issues with "i2c: cadence: Fix the hold bit setting" commit. 1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed. 2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit. The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions. The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message). Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-22ALSA: usb-audio: Add implicit feedback quirk for SSL2Laurence Tratt
As expected, this requires the same quirk as the SSL2+ in order for the clock to sync. This was suggested by, and tested on an SSL2, by Dmitry. Suggested-by: Dmitry <dpavlushko@gmail.com> Signed-off-by: Laurence Tratt <laurie@tratt.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200621075005.52mjjfc6dtdjnr3h@overdrive.tratt.net Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-22sched: Fix race against ptrace_freeze_trace()Peter Zijlstra
There is apparently one site that violates the rule that only current and ttwu() will modify task->state, namely ptrace_{,un}freeze_traced() will change task->state for a remote task. Oleg explains: "TASK_TRACED/TASK_STOPPED was always protected by siglock. In particular, ttwu(__TASK_TRACED) must be always called with siglock held. That is why ptrace_freeze_traced() assumes it can safely do s/TASK_TRACED/__TASK_TRACED/ under spin_lock(siglock)." This breaks the ordering scheme introduced by commit: dbfb089d360b ("sched: Fix loadavg accounting race") Specifically, the reload not matching no longer implies we don't have to block. Simply things by noting that what we need is a LOAD->STORE ordering and this can be provided by a control dependency. So replace: prev_state = prev->state; raw_spin_lock(&rq->lock); smp_mb__after_spinlock(); /* SMP-MB */ if (... && prev_state && prev_state == prev->state) deactivate_task(); with: prev_state = prev->state; if (... && prev_state) /* CTRL-DEP */ deactivate_task(); Since that already implies the 'prev->state' load must be complete before allowing the 'prev->on_rq = 0' store to become visible. Fixes: dbfb089d360b ("sched: Fix loadavg accounting race") Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-07-22x86, vmlinux.lds: Page-align end of ..page_aligned sectionsJoerg Roedel
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
2020-07-21Merge branch 'ionic-updates'David S. Miller
Shannon Nelson says: ==================== ionic updates These are a few odd code tweaks to the ionic driver: FW defined MTU limits, remove unnecessary code, and other tidiness tweaks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: interface file updatesShannon Nelson
Add some new interface values and update a few more descriptions. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: rearrange reset and bus-master controlShannon Nelson
We can prevent potential incorrect DMA access attempts from the NIC by enabling bus-master after the reset, and by disabling bus-master earlier in cleanup. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: update eid test for overflowShannon Nelson
Fix up our comparison to better handle a potential (but largely unlikely) wrap around. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: remove unused ionic_coal_hw_to_usecShannon Nelson
Clean up some unused code. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: set netdev default nameShannon Nelson
If the host system's udev fails to set a new name for the network port, there is no NETDEV_CHANGENAME event to trigger the driver to send the name down to the firmware. It is safe to set the lif name multiple times, so we add a call early on to set the default netdev name to be sure the FW has something to use in its internal debug logging. Then when udev gets around to changing it we can update it to the actual name the system will be using. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: get MTU from lif identityShannon Nelson
Change from using hardcoded MTU limits and instead use the firmware defined limits. The value from the LIF attributes is the frame size, so we take off the header size to convert to MTU size. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offloadMurali Karicheri
Currently drive supports taprio offload which is a tc feature offloaded to cpsw hardware. So driver has to set the hw feature flag, NETIF_F_HW_TC in the net device to be compliant. This patch adds the flag. Fixes: 8127224c2708 ("ethernet: ti: am65-cpsw-qos: add TAPRIO offload support") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: ethernet: ave: Fix error returns in ave_initWang Hai
When regmap_update_bits failed in ave_init(), calls of the functions reset_control_assert() and clk_disable_unprepare() were missed. Add goto out_reset_assert to do this. Fixes: 57878f2f4697 ("net: ethernet: ave: add support for phy-mode setting of system controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21bareudp: Reverted support to enable & disable rx metadata collectionMartin Varghese
The commit fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") breaks the the original(5.7) default behavior of bareudp module to collect RX metadadata at the receive. It was added to avoid the crash at the kernel neighbour subsytem when packet with metadata from bareudp is processed. But it is no more needed as the commit 394de110a733 ("net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash. Fixes: fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21drivers/net/wan/x25_asy: Fix to make it workXie He
This driver is not working because of problems of its receiving code. This patch fixes it to make it work. When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers. The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure. Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Reviewed-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge branch 'dpaa2-eth-add-support-for-TBF-offload'David S. Miller
Ioana Ciornei says: ==================== dpaa2-eth: add support for TBF offload This patch set adds support for TBF offload in dpaa2-eth. The first patch restructures how the .ndo_setup_tc() callback is implemented (each Qdisc is treated in a separate function), the second patch just adds the necessary APIs for configuring the Tx shaper and the last one is handling TC_SETUP_QDISC_TBF and configures as requested the shaper. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: add support for TBF offloadIoana Ciornei
React to TC_SETUP_QDISC_TBF and configure the egress shaper as appropriate with the maximum rate and burst size requested by the user. TBF can only be offloaded on DPAA2 when it's the root qdisc, ie it's a per port shaper. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: add API for Tx shapingIoana Ciornei
Add the necessary API (dpni_set_tx_shaping) for configuring the rate and burst size of a per port shaper in DPAA2. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa2-eth: move the mqprio setup into a separate functionIoana Ciornei
Move the setup done for MQPRIO into a separate function so that with the addition of another offload we do not crowd dpaa2_eth_setup_tc(). After this restructuring it's easier to see what is supported in terms of Qdisc offloading. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21mptcp: move helper to where its usedFlorian Westphal
Only used in token.c. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22ipvs: fix the connection sync failed in some casesguodeqing
The sync_thread_backup only checks sk_receive_queue is empty or not, there is a situation which cannot sync the connection entries when sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf, the sync packets are dropped in __udp_enqueue_schedule_skb, this is because the packets in reader_queue is not read, so the rmem is not reclaimed. Here I add the check of whether the reader_queue of the udp sock is empty or not to solve this problem. Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception") Reported-by: zhouxudong <zhouxudong8@huawei.com> Signed-off-by: guodeqing <geffrey.guo@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-22netfilter: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-22ipvs: queue delayed work to expire no destination connections if ↵Andrew Sy Kim
expire_nodest_conn=1 When expire_nodest_conn=1 and a destination is deleted, IPVS does not expire the existing connections until the next matching incoming packet. If there are many connection entries from a single client to a single destination, many packets may get dropped before all the connections are expired (more likely with lots of UDP traffic). An optimization can be made where upon deletion of a destination, IPVS queues up delayed work to immediately expire any connections with a deleted destination. This ensures any reused source ports from a client (within the IPVS timeouts) are scheduled to new real servers instead of silently dropped. Signed-off-by: Andrew Sy Kim <kim.andrewsy@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-21Merge branch 'devlink-small-improvements'David S. Miller
Parav Pandit says: ==================== devlink small improvements This short series improves the devlink code for lock commment, simplifying checks and keeping the scope of mutex lock for necessary fields. Patch summary: Patch-1 Keep the devlink_mutex for only for necessary changes. Patch-2 Avoids duplicate check for reload flag Patch-3 Adds missing comment for the scope of devlink instance lock Patch-4 Constify devlink instance pointer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Constify devlink instance pointerParav Pandit
Constify devlink instance pointer while checking if reload operation is supported or not. This helps to review the scope of checks done in reload. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Add comment for devlink instance lockParav Pandit
Add comment to describe the purpose of devlink instance lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Avoid duplicate check for reload enabled flagParav Pandit
Reload operation is enabled or not is already checked by devlink_reload(). Hence, remove the duplicate check from devlink_nl_cmd_reload(). Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 18:46:04 +0000