| Age | Commit message (Collapse) | Author |
|---|
|
Add compatibles for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-3-mohammad.rafi.shaik@oss.qualcomm.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the bindings for the Qualcomm QCS9100 and QCS9075 board
specific sound card.
The bindings are the same as for other newer Qualcomm ADSP sound cards,
thus keep them in existing qcom,sm8250.yaml file, even though Linux driver
is separate.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-2-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We don't (and can't) configure the hardware correctly if the number of
channels exceeds the weight of the TDM mask. Report that constraint in
startup of FE.
Fixes: 3df5d0d97289 ("ASoC: apple: mca: Start new platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250518-mca-fixes-v1-1-ee1015a695f6@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the MSIOF register and register bit definitions from the MSIOF SPI
driver to the existing header file <linux/spi/sh_msiof.h>, so they can
be shared with the MSIOF I2S driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/066d1086973eb309006258484e9fe8138807e565.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Unused, but nice to have it documented.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/3d3acaab4a4125106a0655d28c09c050341c5eeb.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The maximum DMA transfer size is limited by the maximum values that can
be written to the word count fields (WDLENx) in the Transmit and Control
Data Registers (SITDR2/SIRDR2). As all MSIOF variants support
transferring data of multiple (two or four) groups, the maximum size can
be doubled by using two groups instead of one, thus reducing setup
overhead for very large SPI transfers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/bad522c76b8d225c195433977b22f95015cf2612.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As FIELD_PREP() masks the value to be stored in the field, the Baud Rate
Generator's Division Ratio handling can be simplified from a look-up
table to a single subtraction.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/e736221942b0381fb53dc64109a1389f7ec5f44a.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MSIOF transmit FIFOs on R-Car V4H and V4M have 256 stages.
Add a new family-specific match entry to handle this.
Add quirk match entries for older R-Car Gen4 Socs (R-Car V3U and S4-8)
that have transmit FIFOs with only 64 stages, just like on R-Car Gen3.
Update the (unused) definition of SIFCTR_TFUA for consistency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/69cb5fc48f034d37484fa127b9864a1971a83417.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.55 of
September 28, 2017, the MSIOF receive FIFOs on R-Car Gen3 SoCs have room
for 256 words of 32 bits.
Note that this change has no actual impact on the behavior of the
driver, as SPI_CONTROLLER_MUST_TX is set, and transfer size is currenty
limited to the minimum of the transmit and receive FIFO sizes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/6f74508ea4681aa0b7c6bf6810eab026725e75a3.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to Renesas Technical Updates TN-RCS-S068A/E, the MSIOF receive
FIFOs on R-Car Gen2 SoCs have room for 128 words of 32 bits.
Note that this change has no actual impact on the behavior of the
driver, as SPI_CONTROLLER_MUST_TX is set, and transfer size is currenty
limited to the minimum of the transmit and receive FIFO sizes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/fd11933f932df81d84f417a21e2179bd4fdcfdc1.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All MSIOF variants support transferring data of multiple (2 or 4)
groups. Add definitions for the register bits related to multiple
groups, and enhance sh_msiof_spi_set_mode_regs() to accept a second
group size.
For now the second group is unused.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/be75e20cfcd2a6c0d73ab09e0126f902911adc69.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Group Output Mask is not a single bit, but a bit field, containing
one bit for each of the four possible groups. Correct the definition.
Note that this change has no direct impact, as the driver only uses
the first group.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/ad268d67807cb7e544eddaf7a056793482a965d4.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert MSIOF FIFO Control Register field accesses to use the
FIELD_PREP() bitfield access macro.
This gets rid of explicit shifts and custom field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/0bf4c366381a8999c9755285272897300852bc18.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert MSIOF Control Register field accesses to use the FIELD_PREP()
bitfield access macro.
This gets rid of explicit shifts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/4511c678c8fce5969eb50ffa7372d53396ff80ff.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert MSIOF Transmit and Receive Clock Select Register field accesses
to use the FIELD_PREP() bitfield access macro.
This gets rid of explicit shifts and custom field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/f2462c99b6ea2e45b995ab4509c2f039043da032.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert MSIOF Transmit and Receive Mode Register 2 field accesses to use
the FIELD_PREP() bitfield access macro.
This gets rid of explicit shifts and custom field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/135b92d010a71e2c224feab3a5792724b4e60ff1.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert MSIOF Transmit and Receive Mode Register 1 field accesses to use
the FIELD_PREP() bitfield access macro.
This gets rid of explicit shifts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/9685c54e752b8ef4256c9b281e9d8292e71d222e.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the words and fs parameters of the various FIFO filler and
emptier functions unsigned, as they can never be negative.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a7b13ecb1811148227ec8c883079085ed1ea6eac.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the words and bits parameters of sh_msiof_spi_txrx_once() unsigned,
as that matches what is passed by the caller.
This allows us to replace min_t() by the safer min().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/30eff1052642a4bcb0f1bc4bed7aae25d355a7dc.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use bools instead of integers for boolean flags, which allows us to
remove the "!!" idiom from several expressions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/35cd51bdfb3c810911a5be757e0ce5bb29dcc755.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit c4887bd4b35b225f ("spi: sh-msiof: use dev in
sh_msiof_spi_probe()") forgot to convert one instance.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/88d271b2d16c6ad7f174858894573f91cec1bc90.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers). However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.
Fix this by using the minimum applicable FIFO size instead. Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.
As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.
Fixes: fe78d0b7691c0274 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d9961767a97758b2614f2ee8afe1bd56dc900a60.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Clock-Synchronized Serial Interfaces with FIFO (MSIOF) driver
matches against both SoC-specific and family-specific compatible values
to maintain backwards-compatibility with old DTBs predating the
introduction of the family-specific compatible values.
For RZ/G1, the SoC-specific compatible match entry can be removed from
the driver: their DT always had the family-specific compatible values,
and thus there was never a need to add the SoC-specific compatible
values to the driver.
For R-Car Gen2 and M3-W, the SoC-specific compatible match entries can
be removed, too, as there are a few points in time where DT
backwards-compatibility was broken for other reasons:
- Legacy DT clock support is no longer supported since commit
58256143cff7c2e0 ("clk: renesas: Remove R-Car Gen2 legacy DT clock
support") in v5.5, and the addition of "renesas,rcar-gen2-msiof" to
DTS in v4.11 predates the completion of the clock conversion in
v4.15,
- Legacy DT LVDS support is no longer supported since commit
841281fe52a769fe ("drm: rcar-du: Drop LVDS device tree backward
compatibility") in v5.18, and the addition of
"renesas,rcar-gen3-msiof" in commit 8b51f97138ca22b6 ("arm64: dts:
r8a7796: Use R-Car Gen 3 fallback binding for msiof nodes") in v4.11
predates the LVDS conversion in commit 58e8ed2ee9abe718 ("arm64:
dts: renesas: Convert to new LVDS DT bindings") in v4.20.
For R-Car H3, the SoC-specific compatible match entry cannot be removed,
as its purpose is to handle an SoC-specific quirk.
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d33393ac7536bc3f0f624b079f70d80dd19843db.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Add a comment to clarify the purpose of the empty element.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/2ab5745407339ba54b63c3e6410082c7c566bf95.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct spmi_voltage_range' are only modified at runtime to compile a
field, n_voltages, that could be computed at compile time.
So, simplify spmi_calculate_num_voltages() and compute n_voltages at
compile time within the SPMI_VOLTAGE_RANGE macro.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
85437 26776 512 112725 1b855 drivers/regulator/qcom_spmi-regulator.o
After:
=====
text data bss dec hex filename
86857 24760 512 112129 1b601 drivers/regulator/qcom_spmi-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/ef2a4b6df61e19470ddf6cbd1f3ca1ce88a3c1a0.1747570556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the misspelling of 'Electronics' in max8952 driver copyright headers.
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250518085734.88890-7-sumanth.gavini@yahoo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes sure the access to the codecs is cached until the device is enumerated.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250519090645.2620292-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
schema
Update text binding to YAML.
Changes during conversion:
Add appropriate include statements for interrupts and clock-names
to resolve errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-mchp-sdhci-v1-2-ed29de05295a@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use kmemdup_array() to avoid multiplication and possible overflows.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cbe0 ("drm: Parse HDR metadata info from EDID")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: "feijuan.li" <feijuan.li@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The tee info reg for teev2 is the same as teev1.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The bootloader info reg for pspv5 is the same as pspv4.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'struct ahash_request' has a flexible array at the end, so it must be the
last member in a struct, to avoid overwriting other struct members.
Therefore, move 'fallback_req' to the end of the 'sun8i_ce_hash_reqctx'
struct.
Fixes: 56f6d5aee88d ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Current driver uses static LMTST region allocated by firmware.
Firmware allocated memory for LMTST is available in PF/VF BAR2.
Using this memory have performance impact as this is mapped as
device memory. There is another option to allocate contiguous
memory at run time and map this in LMT MAP table with the
help of AF driver. With this patch dynamic allocated memory
is used for LMTST.
Also add myself as maintainer for crypto octeontx2 driver
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Function otx2_cptlf_set_dev_info() initializes common
fields of cptlfs data-struct. This function is called
every time a cptlf is initialized but this needs be done
once for a cptlf block. So this initialization is moved
to early device probe code to avoid redundant initialization.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Only add ecb to the cipher name if it isn't already ecb.
Also use memcmp instead of strncmp since these strings are all
stored in an array of length CRYPTO_MAX_ALG_NAME.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Only add ecb to the cipher name if it isn't already ecb.
Also use memcmp instead of strncmp since these strings are all
stored in an array of length CRYPTO_MAX_ALG_NAME.
Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202505151503.d8a6cf10-lkp@intel.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Ensure that the hash state can be exported to and imported from
the generic algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As shash is being phased out, use ahash for the generic tfm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add ahash support to hmac so that drivers that can't do hmac in
hardware do not have to implement duplicate copies of hmac.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Soon hmac will support ahash. For compatibility hmac still supports
shash so it is possible for two hmac algorithms to be registered at
the same time. The shash algorithm will have the driver name
"hmac-shash(XXX-driver)". Due to a quirk in the API, there is no way
to locate the shash algorithm using the name "hmac(XXX-driver)". It
has to be addressed as either "hmac(XXX)" or "hmac-shash(XXX-driver)".
Looking it up with "hmac(XXX-driver)" will simply trigger the creation
of another instance, and on the second instantiation this will fail
with EEXIST.
Catch the error EEXIST along with ENOENT since it is expected.
If a real shash algorithm came this way, it would be addressed using
the proper name "hmac-shash(XXX-driver)".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support to crypto_inst_setname for having a driver template
name that differs from the algorithm template name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make reqsize static for shash algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add export_import and import_core so that hmac can be used as a
fallback by block-only drivers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The shash desc needs to be zeroed after use in setkey as it is
not finalised (finalisation automatically zeroes it).
Also remove the final function as it's been superseded by finup.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Provide an option to handle the partial blocks in the ahash API.
Almost every hash algorithm has a block size and are only able
to hash partial blocks on finalisation.
As a first step disable virtual address support for algorithms
with state sizes larger than HASH_MAX_STATESIZE. This is OK as
virtual addresses are currently only used on synchronous fallbacks.
This means ahash_do_req_chain only needs to handle synchronous
fallbacks, removing the complexities of saving the request state.
Also move the saved request state into the ahash_request object
as nesting is no longer possible.
Add a scatterlist to ahash_request to store the partial block.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add export_core and import_core hooks. These are intended to be
used by algorithms which are wrappers around block-only algorithms,
but are not themselves block-only, e.g., hmac.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The core export and import functions are targeted at implementors
so move them into internal/hash.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the Marvell CESA binding to DT schema format. The
marvell-cesa.txt and mv_cesa.txt are duplicate bindings.
The clock properties are quite varied for each platform hence the
if/then schemas. The old binding was fairly accurate with reality.
The original binding didn't mention there is 1 interrupt per CESA
engine. Based on users, there's a maximum of 2 engines.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
