| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.
[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e19e2b57b6bb640d68dfc7991e1e182922cf867)
Cc: stable@vger.kernel.org
|
|
[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54abdc ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().
[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC). This avoids a
brightness flicker from kernel changing the value. Userspace may however
still change it during boot.
Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0747acf3311229e22009bec4a9e7fc30c879e842)
Cc: stable@vger.kernel.org
|
|
[Why]
It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.
In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).
But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.
This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.
[How]
Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1ba19eb15f88e70782642ce2d934211269337b)
Cc: stable@vger.kernel.org
|
|
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0a1a7fdd9ab61e69907ae71a6fd3d91)
|
|
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a00822 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d)
Cc: stable@vger.kernel.org
|
|
We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba795235a2b99ba9bbef647ab003b2f3145d9bbb)
Cc: stable@vger.kernel.org # 6.12.x
|
|
The check for args->extensions is repeated twice in xe_vm_create_ioctl().
This commit removes the redundant check to streamline the code.
Fixes: 7224788f6756 ("drm/xe: Kill XE_VM_PROPERTY_BIND_OP_ERROR_CAPTURE_ADDRESS extension")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303004942.951699-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da8aecf1f2d89c2b8188bcf7aa252ec146ddd12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Haven't authored any commits to that driver in 10 years, and haven't
had supported hardware for nearly as long.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20250307143740.960328-1-hadess@hadess.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ksmbd_work could be freed when after connection release.
Increment r_count of ksmbd_conn to indicate that requests
are not finished yet and to not release the connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
->interim_entry of ksmbd_work could be deleted after oplock is freed.
We don't need to manage it with linked list. The interim request could be
immediately sent whenever a oplock break wait is needed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The function nvmet_pci_epf_create_cq() always unconditionally calls
nvmet_pci_epf_add_irq_vector() to add an IRQ vector for a completion
queue. But this is not correct if the host requested the creation of a
completion queue for polling, without an IRQ vector specified (i.e. the
flag NVME_CQ_IRQ_ENABLED is not set).
Fix this by calling nvmet_pci_epf_add_irq_vector() and setting the queue
flag NVMET_PCI_EPF_Q_IRQ_ENABLED for the cq only if NVME_CQ_IRQ_ENABLED
is set. While at it, also fix the error path to add the missing removal
of the added IRQ vector if nvmet_cq_create() fails.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The function nvmet_pci_epf_create_sq() use test_and_set_bit() to check
that a submission queue is not already live and if not, set the
NVMET_PCI_EPF_Q_LIVE queue flag to declare the sq live (ready to use).
However, this is done on entry to the function, before the submission
queue is actually fully initialized and ready to use. This creates a
race situation with the function nvmet_pci_epf_poll_sqs_work() which
looks at the NVMET_PCI_EPF_Q_LIVE queue flag to poll the submission
queue when it is live. This race can lead to invalid DMA transfers if
nvmet_pci_epf_poll_sqs_work() runs after the NVMET_PCI_EPF_Q_LIVE flag
is set but before setting the sq pci address and doorbell ofset.
Avoid this race by only testing the NVMET_PCI_EPF_Q_LIVE flag on entry
to nvmet_pci_epf_create_sq() and setting it after the submission queue
is fully setup before nvmet_pci_epf_create_sq() returns success.
Since the function nvmet_pci_epf_create_cq() also has the same racy flag
setting pattern, also make a similar change in that function.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The `SAFETY` comment inside the `wake_up` method references
erroneously the `signal_pending` C function instead of the
`wake_up_process` which is actually called.
Fix the comment to reference the correct C function.
Fixes: fe95f58320e6 ("rust: task: adjust safety comments in Task methods")
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250308-comment-fix-v1-1-4bba709fd36d@posteo.net
[ Slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The VMBus driver manages the MMIO space it owns via the hyperv_mmio
resource tree. Because the synthetic video framebuffer portion of the
MMIO space is initially setup by the Hyper-V host for each guest, the
VMBus driver does an early reserve of that portion of MMIO space in the
hyperv_mmio resource tree. It saves a pointer to that resource in
fb_mmio. When a VMBus driver requests MMIO space and passes "true"
for the "fb_overlap_ok" argument, the reserved framebuffer space is
used if possible. In that case it's not necessary to do another request
against the "shadow" hyperv_mmio resource tree because that resource
was already requested in the early reserve steps.
However, the vmbus_free_mmio() function currently does no special
handling for the fb_mmio resource. When a framebuffer device is
removed, or the driver is unbound, the current code for
vmbus_free_mmio() releases the reserved resource, leaving fb_mmio
pointing to memory that has been freed. If the same or another
driver is subsequently bound to the device, vmbus_allocate_mmio()
checks against fb_mmio, and potentially gets garbage. Furthermore
a second unbind operation produces this "nonexistent resource" error
because of the unbalanced behavior between vmbus_allocate_mmio() and
vmbus_free_mmio():
[ 55.499643] resource: Trying to free nonexistent
resource <0x00000000f0000000-0x00000000f07fffff>
Fix this by adding logic to vmbus_free_mmio() to recognize when
MMIO space in the fb_mmio reserved area would be released, and don't
release it. This filtering ensures the fb_mmio resource always exists,
and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio().
Fixes: be000f93e5d7 ("drivers:hv: Track allocations of children of hv_vmbus in private resource tree")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250310035208.275764-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250310035208.275764-1-mhklinux@outlook.com>
|
|
Video players (eg. mpv) do periodic XResetScreenSaver() calls to
keep the screen on while the video playing. The modesetting ddx
plumbs these straight through into the kernel as DPMS setproperty
ioctls, without any filtering whatsoever. When implemented via
atomic these end up as empty commits on the crtc (which will
nonetheless take one full frame), which leads to a dropped
frame every time XResetScreenSaver() is called.
Let's just filter out redundant DPMS property changes in the
kernel to avoid this issue.
v2: Explain the resulting commits a bit better (Sima)
Document the behaviour in uapi docs (Sima)
Cc: stable@vger.kernel.org
Testcase: igt/kms_flip/flip-vs-dpms-on-nop
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250219160239.17502-1-ville.syrjala@linux.intel.com
|
|
The PCIe error handling has the nvme driver quiesce the device, attempt
to restart it, then wait for that restart to complete.
A PCIe DPC event also toggles the PCIe link. If the slot doesn't have
out-of-band presence detection, this will trigger a pciehp
re-enumeration.
The error handling that calls nvme_error_resume is holding the device
lock while this happens. This lock blocks pciehp's request to disconnect
the driver from proceeding.
Meanwhile the nvme's reset can't make forward progress because its
device isn't there anymore with outstanding IO, and the timeout handler
won't do anything to fix it because the device is undergoing error
handling.
End result: deadlocked.
Fix this by having the timeout handler short cut the disabling for a
disconnected PCIe device. The downside is that we're relying on an IO
timeout to clean up this mess, which could be a minute by default.
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In a rare situation of thermal limit during resume, GuC can
be slow and run into delays like this:
xe 0000:00:02.0: [drm] GT1: excessive init time: 667ms! \
[status = 0x8002F034, timeouts = 0]
xe 0000:00:02.0: [drm] GT1: excessive init time: \
[freq = 100MHz (req = 800MHz), before = 100MHz, \
perf_limit_reasons = 0x1C001000]
xe 0000:00:02.0: [drm] *ERROR* GT1: GuC PC Start failed
------------[ cut here ]------------
xe 0000:00:02.0: [drm] GT1: Failed to start GuC PC: -EIO
When this happens, it will block entirely the GPU to be used.
So, let's try and with a huge timeout in the hope it comes back.
Also, let's collect some information on how long it is usually
taking on situations like this, so perhaps the time can be tuned
later.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307160307.1093391-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b4b05e53b550a886b4754b87fd0dd2b304579e85)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, many instability cases related to D3Cold -> D0 transition
on BMG are under investigation. Among them some bad cases where
the device is lost after 1 to 3 transitions from D3Cold to D0
on the runtime pm, with pcieport upstream bridge port link retrain
failure.
In other cases, it works fine, but with some sudden random memory
corruptions after D3cold, that could be 0xffff missed ack on GT
forcewake or GuC reload related failures.
In some other cases though, D3Cold -> D0 works pretty reliably.
It looks like it is a combination of GPU cards and Host boards at
this point. So, there is no possible/available quirk at this time.
This patch disables the D3Cold by default on BMG by reducing the
vram_d3cold_threshold to 0. Users and developers who wants to enable
it are still able to via
$ echo 300 > /sys/bus/pci/devices/<addr>/vram_d3cold_threshold
Fixes: 3adcf970dc7e ("drm/xe/bmg: Drop force_probe requirement")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4395
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4396
Cc: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250308005636.1475420-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit d945cc876277851053c0cf37927c8d7bd9d0e880)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We currently call intel_set_cdclk_post_plane_update() far
too early. When pipes are active during the reprogramming
the current spot only works for the cd2x divider update
case, as that is synchronize to the pipe's vblank. Squashing
and crawling are not synchronized in any way, so doing the
programming while the pipes/planes are potentially still using
the old hardware state could lead to underruns.
Move the post plane reprgramming to a spot where we know
that the pipes/planes have switched over the new hardware
state.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218211913.27867-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
(cherry picked from commit fb64f5568c0e0b5730733d70a012ae26b1a55815)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The assert incorrectly checks the total length processed which
can in fact be greater than the number of pages. Fix.
Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307100109.21397-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 70e5043ba85eae199b232e39921abd706b5c1fa4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A GT resets can be occurring in parallel while cancelling
work in async call which can requeue these workers.
to avoid that, lets first release guc ids and then cancel
work so they don't requeued.
Fixes: 8ae8a2e8dd21 ("drm/xe: Long running job update")
Fixes: 12c2f962fe71 ("drm/xe: cancel pending job timer before freeing scheduler")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306131211.975503-1-tejas.upadhyay@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8e8d76f62329127b31c64a034b052fb9e30e92af)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ]
Fixes: 7ff6edf4fef3 ("x86/microcode/AMD: Fix mixed steppings support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org
|
|
Add three trace points for the different backing memory allocators for
buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Directly assign b_addr based on the tmpfs folios without a detour
through pages, reuse the folio_put path used for non-tmpfs buffers
and replace all references to pages in comments with folios.
Partially based on a patch from Dave Chinner <dchinner@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The fallback buffer allocation path currently open codes a suboptimal
version of vmalloc to allocate pages that are then mapped into
vmalloc space. Switch to using vmalloc instead, which uses all the
optimizations in the common vmalloc code, and removes the need to
track the backing pages in the xfs_buf structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Unmapped buffers don't exist anymore, so the page straddling
detection and slow path code can go away now.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Unmapped buffer access is a pain, so kill it. The switch to large
folios means we rarely pay a vmap penalty for large buffers,
so this functionality is largely unnecessary now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Now that we have the buffer cache using the folio API, we can extend
the use of folios to allocate high order folios for multi-page
buffers rather than an array of single pages that are then vmapped
into a contiguous range.
This creates a new type of single folio buffers that can have arbitrary
order in addition to the existing multi-folio buffers made up of many
single page folios that get vmapped. The single folio is for now
stashed into the existing b_pages array, but that will go away entirely
later in the series and remove the temporary page vs folio typing issues
that only work because the two structures currently can be used largely
interchangeable.
The code that allocates buffers will optimistically attempt a high
order folio allocation as a fast path if the buffer size is a power
of two and thus fits into a folio. If this high order allocation
fails, then we fall back to the existing multi-folio allocation
code. This now forms the slow allocation path, and hopefully will be
largely unused in normal conditions except for buffers with size
that are not a power of two like larger remote xattrs.
This should improve performance of large buffer operations (e.g.
large directory block sizes) as we should now mostly avoid the
expense of vmapping large buffers (and the vmap lock contention that
can occur) as well as avoid the runtime pressure that frequently
accessing kernel vmapped pages put on the TLBs.
Based on a patch from Dave Chinner <dchinner@redhat.com>, but mutilated
beyond recognition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Since commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural alignment
for kmalloc(power-of-two)", kmalloc and friends guarantee that power of
two sized allocations are naturally aligned. Limit our use of kmalloc
for buffers to these power of two sizes and remove the fallback to
the page allocator for this case, but keep a check in addition to
trusting the slab allocator to get the alignment right.
Also refactor the kmalloc path to reuse various calculations for the
size and gfp flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Lift handling of shmem and slab backed buffers into xfs_buf_alloc_pages
and rename the result to xfs_buf_alloc_backing_mem. This shares more
code and ensures uncached buffers can also use slab, which slightly
reduces the memory usage of growfs on 512 byte sector size file systems,
but more importantly means the allocation invariants are the same for
cached and uncached buffers. Document these new invariants with a big
fat comment mostly stolen from a patch by Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
No need to look at the page count if we can simply call is_vmalloc_addr
on bp->b_addr. This prepares for eventualy removing the b_page_count
field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
b_offset is only set for slab backed buffers and always set to
offset_in_page(bp->b_addr), which can be done just as easily in the only
user of b_offset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
No need to walk the page list if bp->b_addr is valid. That also means
b_offset doesn't need to be taken into account in the unmapped loop as
b_offset is only set for kmem backed buffers which are always mapped.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
We never log large contiguous regions of unmapped buffers, so this
bug is never triggered by the current code. However, the slowpath
for formatting buffer straddling regions is broken.
That is, the size and shape of the log vector calculated across a
straddle does not match how the formatting code formats a straddle.
This results in a log vector with an uninitialised iovec and this
causes a crash when xlog_write_full() goes to copy the iovec into
the journal.
Whilst touching this code, don't bother checking mapped or single
folio buffers for discontiguous regions because they don't have
them. This significantly reduces the overhead of this check when
logging large buffers as calling xfs_buf_offset() is not free and
it occurs a *lot* in those cases.
Fixes: 929f8b0deb83 ("xfs: optimise xfs_buf_item_size/format for contiguous regions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The sched_clock_irqtime was defined as a static key in:
8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
However, this change introduces a 'sleeping in atomic context' warning:
arch/x86/kernel/tsc.c:1214 mark_tsc_unstable()
warn: sleeping in atomic context
As analyzed by Dan, the affected code path is as follows:
vcpu_load() <- disables preempt
-> kvm_arch_vcpu_load()
-> mark_tsc_unstable() <- sleeps
virt/kvm/kvm_main.c
166 void vcpu_load(struct kvm_vcpu *vcpu)
167 {
168 int cpu = get_cpu();
^^^^^^^^^^
This get_cpu() disables preemption.
169
170 __this_cpu_write(kvm_running_vcpu, vcpu);
171 preempt_notifier_register(&vcpu->preempt_notifier);
172 kvm_arch_vcpu_load(vcpu, cpu);
173 put_cpu();
174 }
arch/x86/kvm/x86.c
4979 if (unlikely(vcpu->cpu != cpu) || kvm_check_tsc_unstable()) {
4980 s64 tsc_delta = !vcpu->arch.last_host_tsc ? 0 :
4981 rdtsc() - vcpu->arch.last_host_tsc;
4982 if (tsc_delta < 0)
4983 mark_tsc_unstable("KVM discovered backwards TSC");
arch/x86/kernel/tsc.c
1206 void mark_tsc_unstable(char *reason)
1207 {
1208 if (tsc_unstable)
1209 return;
1210
1211 tsc_unstable = 1;
1212 if (using_native_sched_clock())
1213 clear_sched_clock_stable();
--> 1214 disable_sched_clock_irqtime();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
kernel/jump_label.c
245 void static_key_disable(struct static_key *key)
246 {
247 cpus_read_lock();
^^^^^^^^^^^^^^^^
This lock has a might_sleep() in it which triggers the static checker
warning.
248 static_key_disable_cpuslocked(key);
249 cpus_read_unlock();
250 }
Let revert this change for now as {disable,enable}_sched_clock_irqtime
are used in many places, as pointed out by Sean, including the following:
The code path in clocksource_watchdog():
clocksource_watchdog()
|
-> spin_lock(&watchdog_lock);
|
-> __clocksource_unstable()
|
-> clocksource.mark_unstable() == tsc_cs_mark_unstable()
|
-> disable_sched_clock_irqtime()
And the code path in sched_clock_register():
/* Cannot register a sched_clock with interrupts on */
local_irq_save(flags);
...
/* Enable IRQ time accounting if we have a fast enough sched_clock() */
if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
enable_sched_clock_irqtime();
local_irq_restore(flags);
[ lkp@intel.com: reported a build error in the prev version ]
[ mingo: cherry-picked it over into sched/urgent ]
Closes: https://lore.kernel.org/kvm/37a79ba3-9ce0-479c-a5b0-2bd75d573ed3@stanley.mountain/
Fixes: 8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250205032438.14668-1-laoar.shao@gmail.com
|
|
SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15,
RT722_SDCA_CTL_FU_CH_GAIN, CH_01) ... SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY,
RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN, CH_04) are used by the
"FU15 Boost Volume" control, but not marked as readable.
And the mbq size are 2 for those registers.
Fixes: 7f5d6036ca005 ("ASoC: rt722-sdca: Add RT722 SDCA driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250310080440.58797-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.14-rc7
This includes single USB4/Thunderbolt fix for v6.14-rc7:
- Fix use-after-free in resume from hibernate.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.14-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Prevent use-after-free in resume from hibernate
|
|
The kernel requires X86_FEATURE_SGX_LC to be able to create SGX enclaves,
not just X86_FEATURE_SGX.
There is quite a number of hardware which has X86_FEATURE_SGX but not
X86_FEATURE_SGX_LC. A kernel running on such hardware does not create
the /dev/sgx_enclave file and does so silently.
Explicitly warn if X86_FEATURE_SGX_LC is not enabled to properly notify
users that the kernel disabled the SGX driver.
The X86_FEATURE_SGX_LC, a.k.a. SGX Launch Control, is a CPU feature
that enables LE (Launch Enclave) hash MSRs to be writable (with
additional opt-in required in the 'feature control' MSR) when running
enclaves, i.e. using a custom root key rather than the Intel proprietary
key for enclave signing.
I've hit this issue myself and have spent some time researching where
my /dev/sgx_enclave file went on SGX-enabled hardware.
Related links:
https://github.com/intel/linux-sgx/issues/837
https://patchwork.kernel.org/project/platform-driver-x86/patch/20180827185507.17087-3-jarkko.sakkinen@linux.intel.com/
[ mingo: Made the error message a bit more verbose, and added other cases
where the kernel fails to create the /dev/sgx_enclave device node. ]
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250309172215.21777-2-vdronov@redhat.com
|
|
Bring in the fix for afs_atcell_get_link() to handle RCU pathwalk from
the afs branch for this cycle. This fix has to go upstream now.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The ->get_link() method may be entered under RCU pathwalk conditions (in
which case, the dentry pointer is NULL). This is not taken account of by
afs_atcell_get_link() and lockdep will complain when it tries to lock an
rwsem.
Fix this by marking net->ws_cell as __rcu and using RCU access macros on it
and by making afs_atcell_get_link() just return a pointer to the name in
RCU pathwalk without taking net->cells_lock or a ref on the cell as RCU
will protect the name storage (the cell is already freed via call_rcu()).
Fixes: 30bca65bbbae ("afs: Make /afs/@cell and /afs/.@cell symlinks")
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250310094206.801057-2-dhowells@redhat.com/ # v4
|
|
XFS code for 6.15 to be merged into linux-next
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Merge Zoned devices support for XFS
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs into xfs-6.15-merge
XFS code for 6.15 depends on patches within iomap. Merge them before
pulling in XFS code.
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b73 ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The hypercall in hv_mark_gpa_visibility() is invoked with an input
argument and an output argument. The output argument ostensibly returns
the number of pages that were processed. But in fact, the hypercall does
not provide any output, so the output argument is spurious.
The spurious argument is harmless because Hyper-V ignores it, but in the
interest of correctness and to avoid the potential for future problems,
remove it.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250226200612.2062-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250226200612.2062-2-mhklinux@outlook.com>
|
|
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer.
Fixes: 68a2d20b79b1 ("drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com>
|
|
The device object required in 'hvfb_release_phymem' function
for 'dma_free_coherent' can also be obtained from the 'info'
pointer, making 'hdev' parameter in 'hvfb_putmem' redundant.
Remove the unnecessary 'hdev' argument from 'hvfb_putmem'.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com>
|
|
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa2a ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa2a. Commit c25a19afb81c has no reference
to 3cb73bc3fa2a, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa2a. In any case, as of commit
c25a19afb81c, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa2a, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur with any kernel started via kexec.
See extensive discussion of the problem and solution at [2].
[1] https://lore.kernel.org/linux-hyperv/20201014092429.1415040-1-kasong@redhat.com/
[2] https://lore.kernel.org/linux-hyperv/BLAPR10MB521793485093FDB448F7B2E5FDE92@BLAPR10MB5217.namprd10.prod.outlook.com/
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Fixes: c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250218230130.3207-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250218230130.3207-1-mhklinux@outlook.com>
|
|
When a Hyper-V DRM device is probed, the driver allocates MMIO space for
the vram, and maps it cacheable. If the device removed, or in the error
path for device probing, the MMIO space is released but no unmap is done.
Consequently the kernel address space for the mapping is leaked.
Fix this by adding iounmap() calls in the device removal path, and in the
error path during device probing.
Fixes: f1f63cbb705d ("drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()")
Fixes: a0ab5abced55 ("drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250210193441.2414-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250210193441.2414-1-mhklinux@outlook.com>
|
