summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-10Revert "acpi, nfit: Further restrict userspace ARS start requests"Dan Williams
The following lockdep splat results from acquiring the init_mutex in acpi_nfit_clear_to_send(): WARNING: possible circular locking dependency detected lt-daxdev-error/7216 is trying to acquire lock: 00000000f694db15 (&acpi_desc->init_mutex){+.+.}, at: acpi_nfit_clear_to_send+0x27/0x80 [nfit] but task is already holding lock: 00000000182298f2 (&nvdimm_bus->reconfig_mutex){+.+.}, at: __nd_ioctl+0x457/0x610 [libnvdimm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&nvdimm_bus->reconfig_mutex){+.+.}: nvdimm_badblocks_populate+0x41/0x150 [libnvdimm] nd_region_notify+0x95/0xb0 [libnvdimm] nd_device_notify+0x40/0x50 [libnvdimm] ars_complete+0x7f/0xd0 [nfit] acpi_nfit_scrub+0xbb/0x410 [nfit] process_one_work+0x22b/0x5c0 worker_thread+0x3c/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 -> #0 (&acpi_desc->init_mutex){+.+.}: __mutex_lock+0x83/0x980 acpi_nfit_clear_to_send+0x27/0x80 [nfit] __nd_ioctl+0x474/0x610 [libnvdimm] nd_ioctl+0xa4/0xb0 [libnvdimm] do_vfs_ioctl+0xa5/0x6e0 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe New infrastructure is needed to be able to perform this check without acquiring the lock. Fixes: 594861215c83 ("acpi, nfit: Further restrict userspace ARS start") Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-10acpi, nfit: Fix ARS overflow continuationDan Williams
When the platform BIOS is unable to report all the media error records it requires the OS to restart the scrub at a prescribed location. The driver detects the overflow condition, but then fails to report it to the ARS state machine after reaping the records. Propagate -ENOSPC correctly to continue the ARS operation. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reported-by: Jacek Zloch <jacek.zloch@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-10floppy: fix race condition in __floppy_read_block_0()Jens Axboe
LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1 #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bba5ef ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10ide: don't use req->specialChristoph Hellwig
Just replace it with a field of the same name in struct ide_req. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10pd: replace ->special use with private data in the requestChristoph Hellwig
Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10aoe: replace ->special use with private data in the requestChristoph Hellwig
Makes the code a whole lot easier to read. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10skd_main: don't use req->specialChristoph Hellwig
Add a retries field to the internal request structure instead, which gets set to zero on the first submission. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10nullb: remove leftover legacy request codeChristoph Hellwig
null_softirq_done_fn is only used for the blk-mq path, so remove the other branch. Also rename the function to better match the method name. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10fnic: fix fnic_scsi_host_{start,end}_tagChristoph Hellwig
The way these functions abuse ->special to try to store the dummy request looks completely broken, given that it actually stores the original scsi command. Instead switch to ->host_scribble and store the actual dummy command. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10Merge tag 'for-linus-4.20a-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Several fixes, mostly for rather recent regressions when running under Xen" * tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove size limit of privcmd-buf mapping interface xen: fix xen_qlock_wait() x86/xen: fix pv boot xen-blkfront: fix kernel panic with negotiate_mq error path xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
2018-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix occasional page fault during boot due to memblock resizing before the linear map is up. - Define NET_IP_ALIGN to 0 to improve the DMA performance on some platforms. - lib/raid6 test build fix. - .mailmap update for Punit Agrawal * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: memblock: don't permit memblock resizing until linear mapping is up arm64: mm: define NET_IP_ALIGN to 0 lib/raid6: Fix arm64 test build mailmap: Update email for Punit Agrawal
2018-11-10sysv: return 'err' instead of 0 in __sysv_write_inodeYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: fs/sysv/inode.c: In function '__sysv_write_inode': fs/sysv/inode.c:239:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] __sysv_write_inode should return 'err' instead of 0 Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-10Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has one bugfix (qcom-geni driver), one arch enablement (i2c-omap driver, no code change), and a new driver (nvidia-gpu) this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: usb: typec: ucsi: add support for Cypress CCGx i2c: nvidia-gpu: make pm_ops static i2c: add i2c bus driver for NVIDIA GPU i2c: qcom-geni: Fix runtime PM mismatch with child devices MAINTAINERS: Add entry for i2c-omap driver i2c: omap: Enable for ARCH_K3 dt-bindings: i2c: omap: Add new compatible for AM654 SoCs
2018-11-09net: mvneta: correct typoAlexandre Belloni
The reserved variable should be named reserved1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09flow_dissector: do not dissect l4 ports for fragments배석진
Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed3741 ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: qualcomm: rmnet: Fix incorrect assignment of real_devSubash Abhinov Kasiviswanathan
A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09block: remove set but not used variable 'et'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: block/blk-ioc.c: In function 'put_io_context_active': block/blk-ioc.c:174:24: warning: variable 'et' set but not used [-Wunused-but-set-variable] It not used any more after commit a1ce35fa4985 ("block: remove dead elevator code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: remove the BLKPREP_* values.Christoph Hellwig
Unused now. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09scsi: return blk_status_t from device handler ->prep_fnChristoph Hellwig
Remove the last use of the old BLKPREP_* values, which get converted to BLK_STS_* later anyway. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09scsi: return blk_status_t from scsi_init_io and ->init_commandChristoph Hellwig
Replace the old BLKPREP_* values with the BLK_STS_ ones that they are converted to later anyway. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09scsi: clean up error handling in scsi_init_ioChristoph Hellwig
There is no need to call scsi_mq_free_sgtables until we have actually allocated sgtables. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09scsi: push blk_status_t up into scsi_setup_{fs,scsi}_cmndChristoph Hellwig
This just moves the prep_to_mq calls up in preparation of further removal of BLKPREP_* usage. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09scsi: simplify scsi_prep_state_checkChristoph Hellwig
Return a blk_status_t directly, and make the code a little more compact by handling the fast path in the caller. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09ide: cleanup ->prep_rq calling conventionChristoph Hellwig
The return value is just used as a binary yes/no decision, so switch it to a bool instead of the old BLKPREP_* values returned as an int. Also clean up a few related comments. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09Merge branch 'aquantia-fixes'David S. Miller
Igor Russkikh says: ==================== net: aquantia: 2018-11 bugfixes The patchset fixes a number of bugs found in various areas after driver validation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: aquantia: allow rx checksum offload configurationDmitry Bogdanov
RX Checksum offloads could not be configured and ignored netdev features flag for checksumming. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: aquantia: invalid checksumm offload implementationDmitry Bogdanov
Packets with marked invalid IP/UDP/TCP checksums were considered as good by the driver. The error was in a logic, processing offload bits in RX descriptor. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: aquantia: fixed enable unicast on 32 macvlanIgor Russkikh
Fixed a condition mistake due to which macvlans unicast item number 32 was not added in the unicast filter. The consequence is that when exactly 32 macvlans are created on NIC, the last created macvlan receives no traffic because its MAC was not registered in HW. Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: aquantia: fix potential IOMMU fault after driver unbindDmitry Bogdanov
IOMMU fault may occurr on unbind/bind or if_down/if_up sequence. Although driver disables the rings on down, this is not enough. Due to internal HW design, during subsequent initialization NIC sometimes may reuse RX descriptors cache and write to the host memory from the descriptor cache. That's get catched by IOMMU on host. This patch invalidates the descriptor cache in NIC on interface down to prevent writing to the cached descriptors and to the memory pointed in those descriptors. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: aquantia: synchronized flow control between mac/phyIgor Russkikh
Flow control statuses were not synchronized between blocks, that caused packets/link drop on some corner cases, when MAC sent PFC although Phy was not expecting these to come. Driver should readout the negotiated FC from phy and configure RX block accordigly. This is done on each link change event with information from FW. Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09arm64: dts: qcom: msm8998: Reserve gpio ranges on MTPBjorn Andersson
GPIOs 0 through 3 and 81 through 84 are configured to not be accessible from the application CPUs. Mark them as reserved to allow the MSM8998 MTP to boot after the introduction of 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning"). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09arm64: dts: sdm845-mtp: Reserve reserved gpiosBjorn Andersson
With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") the gpiolib will attempt to read the direction of all pins, which triggers a read from protected register regions. The pins 0 through 3 and 81 through 84 are protected, so mark these as reserved. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09Merge tag 'devicetree-fixes-for-4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Add validation of NUMA distance map to prevent crashes with bad map - Fix setting of dma_mask * tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of, numa: Validate some distance map rules of/device: Really only set bus DMA mask when appropriate
2018-11-09Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: - Two fixes for an ubd regression, one for missing locking, and one for a missing initialization of a field. The latter was an old latent bug, but it's now visible and triggers (Me, Anton Ivanov) - Set of NVMe fixes via Christoph, but applied manually due to a git tree mixup (Christoph, Sagi) - Fix for a discard split regression, in three patches (Ming) - Update libata git trees (Geert) - SPDX identifier for sata_rcar (Kuninori Morimoto) - Virtual boundary merge fix (Johannes) - Preemptively clear memory we are going to pass to userspace, in case the driver does a short read (Keith) * tag 'for-linus-20181109' of git://git.kernel.dk/linux-block: block: make sure writesame bio is aligned with logical block size block: cleanup __blkdev_issue_discard() block: make sure discard bio is aligned with logical block size Revert "nvmet-rdma: use a private workqueue for delete" nvme: make sure ns head inherits underlying device limits nvmet: don't try to add ns to p2p map unless it actually uses it sata_rcar: convert to SPDX identifiers ubd: fix missing initialization of io_req block: Clear kernel memory before copying to user MAINTAINERS: Fix remaining pointers to obsolete libata.git ubd: fix missing lock around request issue block: respect virtual boundary mask in bvecs
2018-11-09Merge tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull Ceph fixes from Ilya Dryomov: "Two CephFS fixes (copy_file_range and quota) and a small feature bit cleanup" * tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client: libceph: assume argonaut on the server side ceph: quota: fix null pointer dereference in quota check ceph: add destination file data sync before doing any remote copy
2018-11-09Merge tag 'mips_fixes_4.20_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A couple of small MIPS fixes for 4.20: - Extend an array to avoid overruns on some Octeon hardware, fixing a bug introduced in 4.3. - Fix a coherent DMA regression for systems without cache-coherent DMA introduced in the 4.20 merge window" * tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation MIPS: OCTEON: fix out of bounds array access on CN68XX
2018-11-09clk: qcom: gcc: Fix board clock node nameVinod Koul
Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-09x86/cpu/vmware: Do not trace vmware_sched_clock()Steven Rostedt (VMware)
When running function tracing on a Linux guest running on VMware Workstation, the guest would crash. This is due to tracing of the sched_clock internal call of the VMware vmware_sched_clock(), which causes an infinite recursion within the tracing code (clock calls must not be traced). Make vmware_sched_clock() not traced by ftrace. Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock") Reported-by: GwanYeong Kim <gy741.kim@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Alok Kataria <akataria@vmware.com> CC: GwanYeong Kim <gy741.kim@gmail.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org CC: Thomas Gleixner <tglx@linutronix.de> CC: virtualization@lists.linux-foundation.org CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home
2018-11-09block: remove req->timeout_listChristoph Hellwig
Unused now that the legacy request path is gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09usb: typec: ucsi: add support for Cypress CCGxAjay Gupta
Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeoutYoshihiro Shimoda
This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09drm/dp_mst: Check if primary mstb is nullStanislav Lisovskiy
Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
2018-11-09i2c: nvidia-gpu: make pm_ops staticWolfram Sang
sparse rightfully says: warning: symbol 'gpu_i2c_driver_pm' was not declared. Should it be static? Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09i2c: add i2c bus driver for NVIDIA GPUAjay Gupta
Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09ext4: missing !bh check in ext4_xattr_inode_write()Vasily Averin
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13
2018-11-09can: flexcan: use can_rx_offload_queue_sorted() for flexcan_irq_bus_*()Oleksij Rempel
Currently, in case of bus error, driver will generate error message and put in the tail of the message queue. To avoid confusions, this change should place the bus related messages in proper order. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: rx-offload: rename can_rx_offload_irq_queue_err_skb() to ↵Oleksij Rempel
can_rx_offload_queue_tail() This function has nothing todo with error. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: flexcan: handle tx-complete CAN frames via rx-offload infrastructureOleksij Rempel
Current flexcan driver will put TX-ECHO in regular unsorted way, in this case TX-ECHO can come after the response to the same TXed message. In some cases, for example for J1939 stack, things will break. This patch is using new rx-offload API to put the messages just in the right place. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 SocCherian, George
Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable@vger.kernel.org Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09usb: xhci: fix timeout for transition from RExit to U0Aaron Ma
This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 10:24:06 +0000