summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-23cifs/smb3: Fix data inconsistent when punch holeZhang Xiaoxu
When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French <stfrench@microsoft.com>
2020-06-23cifs/smb3: Fix data inconsistent when zero file rangeZhang Xiaoxu
CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French <stfrench@microsoft.com>
2020-06-23libbpf: Fix CO-RE relocs against .text sectionAndrii Nakryiko
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't return .text "BPF program", if it is a function storage for sub-programs. Because of that, any CO-RE relocation in helper non-inlined functions will fail. Fix this by searching for .text-corresponding BPF program manually. Adjust one of bpf_iter selftest to exhibit this pattern. Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm") Reported-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
2020-06-23security: Fix hook iteration and default value for inode_copy_up_xattrKP Singh
inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr and 1 to reject it. If the LSM does not know about the xattr, it's expected to return -EOPNOTSUPP, which is the correct default value for this hook. BPF LSM, currently, uses 0 as the default value and thereby falsely allows all overlay fs xattributes to be copied up. The iteration logic is also updated from the "bail-on-fail" call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out on other values. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: James Morris <jmorris@namei.org>
2020-06-23Merge branch 'cxgb4-cxgb4vf-fix-warnings-reported-by-sparse'David S. Miller
Rahul Lakkireddy says: ==================== cxgb4/cxgb4vf: fix warnings reported by sparse This series of patches fix various warnings reported by the sparse tool. Patches 1 and 2 fix lock context imbalance warnings. Patch 3 fixes cast to restricted __be64 warning when fetching timestamp in PTP path. Patch 4 fixes several cast to restricted __be32 warnings in TC-U32 offload parser. Patch 5 fixes several cast from restricted __be16 warnings in parsing L4 ports for filters. Patch 6 fixes several restricted __be32 degrades to integer warnings when comparing IP address masks for exact-match filters. Patch 7 fixes cast to restricted __be64 warning when fetching SGE queue contexts in device dump collection. Patch 8 fixes cast from restricted __sum16 warning when saving IPv4 partial checksum. Patch 9 fixes issue with string array scope in DCB path. Patch 10 fixes a set but unused variable warning when DCB is disabled. Patch 11 fixes several kernel-doc comment warnings in cxgb4 driver. Patch 12 fixes several kernel-doc comment warnings in cxgb4vf driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4vf: update kernel-doc line commentsRahul Lakkireddy
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4be754 ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d91464da ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a9cc4 ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb6407 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: update kernel-doc line commentsRahul Lakkireddy
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: l2t.c:616: warning: Cannot understand * @dev: net_device pointer t4_hw.c:3175: warning: Function parameter or member 'adap' not described in 't4_get_exprom_version' t4_hw.c:3175: warning: Excess function parameter 'adapter' description in 't4_get_exprom_version' Fixes: 56d36be4dd5f ("cxgb4: Add HW and FW support code") Fixes: fd3a47900b6f ("cxgb4: Add packet queues and packet DMA code") Fixes: 26f7cbc0a5a4 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: 793dad94e745 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: ba3f8cd55f2a ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: ddc7740d9a7c ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 193c4c2845f7 ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 8f46d46715a1 ("cxgb4: Use Firmware params to get buffer-group map") Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 5ccf9d049615 ("cxgb4: update API for TP indirect register access") Fixes: 3bdb376e6944 ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Fixes: 9d5fd927d20b ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: 98f3697f8d41 ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix set but unused variable when DCB is disabledRahul Lakkireddy
Remove the set but unused variable when DCB is disabled. Instead, do the calculation directly inline. Fixes following warning in make W=1: cxgb4_main.c: In function 'cfg_queues': cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used [-Wunused-but-set-variable] u32 i, n10g = 0, qidx = 0, n1g = 0; ^ Fixes: 116ca924aea6 ("cxgb4: fix checks for max queues to allocate") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move DCB version extern to header fileRahul Lakkireddy
Move the DCB version string array extern to header file. Fixes following sparse warning: cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Fixes: ebddd97afb89 ("cxgb4: add support to display DCB info") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: remove cast when saving IPv4 partial checksumRahul Lakkireddy
The checksum field in IPv4 header is in __sum16 and ip_fast_csum() also returns __sum16. So, no need to cast it to u16. Fixes following sparse warning: sge.c:1539:47: warning: cast from restricted __sum16 sge.c:1539:44: warning: incorrect type in assignment (different base types) sge.c:1539:44: expected restricted __sum16 [usertype] check sge.c:1539:44: got unsigned short [usertype] Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix SGE queue dump destination buffer contextRahul Lakkireddy
The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use correct type for all-mask IP address comparisonRahul Lakkireddy
Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix endian conversions for L4 ports in filtersRahul Lakkireddy
The source and destination L4 ports in filter offload need to be in CPU endian. They will finally be converted to Big Endian after all operations are done and before giving them to hardware. The L4 ports for NAT are expected to be passed as a byte stream TCB. So, treat them as such. Fixes following sparse warnings in several places: cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16 cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different base types) cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst Fixes: dca4faeb812f ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: 62488e4b53ae ("cxgb4: add basic tc flower offload support") Fixes: 557ccbf9dfa8 ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: parse TC-U32 key values and masks nativelyRahul Lakkireddy
TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use unaligned conversion for fetching timestampRahul Lakkireddy
Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move PTP lock and unlock to caller in Tx pathRahul Lakkireddy
Check for whether PTP is enabled or not at the caller and perform locking/unlocking at the caller. Fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' - different lock contexts for basic block Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move handling L2T ARP failures to callerRahul Lakkireddy
Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23drm/amdgpu/display: Unlock mutex on errorJohn van der Kamp
Make sure we pass through ret label to unlock the mutex. Signed-off-by: John van der Kamp <sjonny@suffe.me.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-23Merge branch 'net-qed-qede-various-stability-fixes'David S. Miller
Alexander Lobakin says: ==================== net: qed/qede: various stability fixes This set addresses several near-critical issues that were observed and reproduced on different test and production configurations. v2: - don't split the "Fixes:" tag across several lines in patch 9; - no functional changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix "maybe uninitialized" warningAlexander Lobakin
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: reset ILT block sizes before recomputing to fix crashesAlexander Lobakin
Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix use-after-free on recovery and AER handlingAlexander Lobakin
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix NVMe login fails over VFsAlexander Lobakin
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix async event callbacks unregisteringAlexander Lobakin
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix left elements count calculationAlexander Lobakin
qed_chain_get_element_left{,_u32} returned 0 when the difference between producer and consumer page count was equal to the total page count. Fix this by conditional expanding of producer value (vs unconditional). This allowed to eliminate normalizaton against total page count, which was the cause of this bug. Misc: replace open-coded constants with common defines. Fixes: a91eb52abb50 ("qed: Revisit chain implementation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: ethtool: add missing string for NETIF_F_GSO_TUNNEL_REMCSUMAlexander Lobakin
Commit e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") added new GSO type and a corresponding netdev feature, but missed Ethtool's 'netdev_features_strings' table. Give it a name so it will be exposed to userspace and become available for manual configuration. v3: - decouple from "netdev_features_strings[] cleanup" series; - no functional changes. v2: - don't split the "Fixes:" tag across lines; - no functional changes. Fixes: e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23Merge branch 'wg-fixes'David S. Miller
Jason A. Donenfeld says: ==================== wireguard fixes for 5.8-rc3 This series contains two fixes, one cosmetic and one quite important: 1) Avoid the `if ((x = f()) == y)` pattern, from Frank Werner-Krippendorf. 2) Mitigate a potential memory leak by creating circular netns references, while also making the netns semantics a bit more robust. Patch (2) has a "Fixes:" line and should be backported to stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: device: avoid circular netns referencesJason A. Donenfeld
Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: noise: do not assign initiation time in if conditionFrank Werner-Krippendorf
Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23Merge branch 'bridge-mrp-Update-MRP_PORT_ROLE'David S. Miller
Horatiu Vultur says: ==================== bridge: mrp: Update MRP_PORT_ROLE This patch series does the following: - fixes the enum br_mrp_port_role_type. It removes the port role none(0x2) because this is in conflict with the standard. The standard defines the interconnect port role as value 0x2. - adds checks regarding current defined port roles: primary(0x0) and secondary(0x1). v2: - add the validation code when setting the port role. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bridge: mrp: Validate when setting the port roleHoratiu Vultur
This patch adds specific checks for primary(0x0) and secondary(0x1) when setting the port role. For any other value the function 'br_mrp_set_port_role' will return -EINVAL. Fixes: 20f6a05ef63594 ("bridge: mrp: Rework the MRP netlink interface") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bridge: uapi: mrp: Fix MRP_PORT_ROLEHoratiu Vultur
Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict with the IEC 62439-2 standard. The standard defines the following port roles: primary (0x0), secondary(0x1), interconnect(0x2). Therefore remove the port role none. Fixes: 4714d13791f831 ("bridge: uapi: mrp: Add mrp attributes.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23i2c: designware: Adjust bus speed independently of ACPIAndy Shevchenko
John Stultz reported that commit f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") caused a regression on the HiKey board where adv7511 HDMI bridge driver wasn't probing anymore due the I2C bus failed to start. It seems the change caused the bus speed being zero when CONFIG_ACPI not set and neither speed based on "clock-frequency" device property or default fast mode is set. Fix this by splitting i2c_dw_acpi_adjust_bus_speed() to i2c_dw_acpi_round_bus_speed() and i2c_dw_adjust_bus_speed(), where the latter one has the code that runs independently of ACPI. Fixes: f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "All bugfixes except for a couple cleanup patches" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling KVM: X86: Fix MSR range of APIC registers in X2APIC mode KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL KVM: nVMX: Plumb L2 GPA through to PML emulation KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic() KVM: LAPIC: ensure APIC map is up to date on concurrent update requests kvm: lapic: fix broken vcpu hotplug Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU" KVM: VMX: Add helpers to identify interrupt type from intr_info kvm/svm: disable KCSAN for svm_vcpu_run() KVM: MIPS: Fix a build error for !CPU_LOONGSON64
2020-06-23drm: bridge: dw-hdmi: Make connector creation optionalLaurent Pinchart
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and call drm_bridge_hpd_notify() notify to report HPD. This provides the necessary API to support disabling connector creation, do so by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in dw_hdmi_bridge_attach(). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-23-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_connector to internal functions as neededLaurent Pinchart
To prepare for making connector creation optional in the driver, pass the drm_connector explicitly to the internal functions that require it. The functions that still access the connector from the dw_hdmi structure are dw_hdmi_connector_create() and __dw_hdmi_probe(). The former access is expected, as that's where the internal connector is created. The latter will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-22-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Store current connector in struct dw_hdmiLaurent Pinchart
Store the connector that the bridge is currently wired to in the dw_hdmi structure. This is currently identical to the connector field, but will differ once the driver supports disabling connector creation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-21-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Split connector creation to a separate functionLaurent Pinchart
Isolate all the code related to connector creation to a new dw_hdmi_connector_create() function, to prepare for making connector creation optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-20-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to dw_hdmi_support_scdc()Laurent Pinchart
To prepare for making connector creation optional in the driver, pass the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer is passed to the callers where required, particularly to the dw_hdmi_phy_ops .init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Constify mode argument to internal functionsLaurent Pinchart
Several internal functions take a drm_display_mode argument to configure the HDMI encoder or the HDMI PHY. They must not modify the mode, make the pointer const to enforce that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-18-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Constify mode argument to dw_hdmi_phy_ops .init()Laurent Pinchart
The PHY .init() must not modify the mode it receives. Make the pointer const to enfore that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-17-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to .mode_valid()Laurent Pinchart
Replace the drm_connector pointer passed to the .mode_valid() function with a const drm_display_info pointer, as that's all the function should need. Use the display info passed to the bridge .mode_valid() operation instead of retrieving it from the connector, to prepare for make connector creation optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: meson: dw-hdmi: Use dw_hdmi context to replace hackLaurent Pinchart
The meson-dw-hdmi driver needs to access its own context from the .mode_valid() operation. It currently gets it from the dev_private field of the drm_device retrieved from the connector, which is a hack. Use the private data passed to the .mode_valid() operation instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-15-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Remove unused field from dw_hdmi_plat_dataLaurent Pinchart
The input_bus_format field of struct dw_hdmi_plat_data is unused. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-14-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass private data pointer to .configure_phy()Laurent Pinchart
The .configure_phy() operation takes a dw_hdmi_plat_data pointer as a context argument. This differs from .mode_valid() that takes a custom private context pointer, causing possible confusion. Make the dw_hdmi_plat_data operations more consistent by passing the private context pointer to .configure_phy() as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-13-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass private data pointer to .mode_valid()Laurent Pinchart
Platform glue drivers for dw_hdmi may need to access device-specific data from their .mode_valid() implementation. They currently have no clean way to do so, and one driver hacks around it by accessing the dev_private data of the drm_device retrieved from the connector. Add a priv_data void pointer to the dw_hdmi_plat_data structure, and pass it to the .mode_valid() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
2020-06-23io_uring: fix io_sq_thread no schedule when busyXuan Zhuo
When the user consumes and generates sqe at a fast rate, io_sqring_entries can always get sqe, and ret will not be equal to -EBUSY, so that io_sq_thread will never call cond_resched or schedule, and then we will get the following system error prompt: rcu: INFO: rcu_sched self-detected stall on CPU or watchdog: BUG: soft lockup-CPU#23 stuck for 112s! [io_uring-sq:1863] This patch checks whether need to call cond_resched() by checking the need_resched() function every cycle. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-22 15:34:36 +0000