summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-18HID: logitech-hidpp: split g920_get_config()Andrey Smirnov
Original version of g920_get_config() contained two kind of actions: 1. Device specific communication to query/set some parameters which requires active communication channel with the device, or, put in other way, for the call to be sandwiched between hid_device_io_start() and hid_device_io_stop(). 2. Input subsystem specific FF controller initialization which, in order to access a valid 'struct hid_input' via 'hid->inputs.next', requires claimed hidinput which means be executed after the call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Location of g920_get_config() can only fulfill requirements for #1 and not #2, which might result in following backtrace: [ 88.312258] logitech-hidpp-device 0003:046D:C262.0005: HID++ 4.2 device connected. [ 88.320298] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 88.320304] #PF: supervisor read access in kernel mode [ 88.320307] #PF: error_code(0x0000) - not-present page [ 88.320309] PGD 0 P4D 0 [ 88.320315] Oops: 0000 [#1] SMP PTI [ 88.320320] CPU: 1 PID: 3080 Comm: systemd-udevd Not tainted 5.4.0-rc1+ #31 [ 88.320322] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS 149.0.0.0.0 09/17/2018 [ 88.320334] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320338] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320341] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320345] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320347] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320350] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320352] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320354] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320358] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320363] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 [ 88.320366] Call Trace: [ 88.320377] ? _cond_resched+0x15/0x30 [ 88.320387] ? create_pinctrl+0x2f/0x3c0 [ 88.320393] ? kernfs_link_sibling+0x94/0xe0 [ 88.320398] ? _cond_resched+0x15/0x30 [ 88.320402] ? kernfs_activate+0x5f/0x80 [ 88.320406] ? kernfs_add_one+0xe2/0x130 [ 88.320411] hid_device_probe+0x106/0x170 [ 88.320419] really_probe+0x147/0x3c0 [ 88.320424] driver_probe_device+0xb6/0x100 [ 88.320428] device_driver_attach+0x53/0x60 [ 88.320433] __driver_attach+0x8a/0x150 [ 88.320437] ? device_driver_attach+0x60/0x60 [ 88.320440] bus_for_each_dev+0x78/0xc0 [ 88.320445] bus_add_driver+0x14d/0x1f0 [ 88.320450] driver_register+0x6c/0xc0 [ 88.320453] ? 0xffffffffc0d67000 [ 88.320457] __hid_register_driver+0x4c/0x80 [ 88.320464] do_one_initcall+0x46/0x1f4 [ 88.320469] ? _cond_resched+0x15/0x30 [ 88.320474] ? kmem_cache_alloc_trace+0x162/0x220 [ 88.320481] ? do_init_module+0x23/0x230 [ 88.320486] do_init_module+0x5c/0x230 [ 88.320491] load_module+0x26e1/0x2990 [ 88.320502] ? ima_post_read_file+0xf0/0x100 [ 88.320508] ? __do_sys_finit_module+0xaa/0x110 [ 88.320512] __do_sys_finit_module+0xaa/0x110 [ 88.320520] do_syscall_64+0x5b/0x180 [ 88.320525] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.320528] RIP: 0033:0x7f8d8d1f01fd [ 88.320532] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5b 8c 0c 00 f7 d8 64 89 01 48 [ 88.320535] RSP: 002b:00007ffefa3bb068 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 88.320539] RAX: ffffffffffffffda RBX: 000055922040cb40 RCX: 00007f8d8d1f01fd [ 88.320541] RDX: 0000000000000000 RSI: 00007f8d8ce4984d RDI: 0000000000000006 [ 88.320543] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 [ 88.320545] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f8d8ce4984d [ 88.320547] R13: 0000000000000000 R14: 000055922040efc0 R15: 000055922040cb40 [ 88.320551] Modules linked in: hid_logitech_hidpp(+) fuse rfcomm ccm xt_CHECKSUM xt_MASQUERADE bridge stp llc nf_nat_tftp nf_conntrack_tftp nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat tun iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc dm_crypt nls_utf8 hfsplus intel_rapl_msr intel_rapl_common ath9k_htc ath9k_common x86_pkg_temp_thermal intel_powerclamp b43 ath9k_hw coretemp snd_hda_codec_hdmi cordic kvm_intel snd_hda_codec_cirrus mac80211 snd_hda_codec_generic ledtrig_audio kvm snd_hda_intel snd_intel_nhlt irqbypass snd_hda_codec btusb btrtl snd_hda_core ath btbcm ssb snd_hwdep btintel snd_seq crct10dif_pclmul iTCO_wdt snd_seq_device crc32_pclmul bluetooth mmc_core iTCO_vendor_support joydev cfg80211 [ 88.320602] applesmc ghash_clmulni_intel ecdh_generic snd_pcm input_polldev intel_cstate ecc intel_uncore thunderbolt snd_timer i2c_i801 libarc4 rfkill intel_rapl_perf lpc_ich mei_me pcspkr bcm5974 snd bcma mei soundcore acpi_als sbs kfifo_buf sbshc industrialio apple_bl i915 i2c_algo_bit drm_kms_helper drm uas crc32c_intel usb_storage video hid_apple [ 88.320630] CR2: 0000000000000018 [ 88.320633] ---[ end trace 933491c8a4fadeb7 ]--- [ 88.320642] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320645] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320647] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320650] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320652] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320655] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320657] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320659] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320662] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320667] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 To solve this issue: 1. Split g920_get_config() such that all of the device specific communication remains a part of the function and input subsystem initialization bits go to hidpp_ff_init() 2. Move call to hidpp_ff_init() from being a part of g920_get_config() to be the last step of .probe(), right after a call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Fixes: 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Sam Bazley <sambazley@fastmail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Henrik Rydberg <rydberg@bitmath.org> Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Cc: Austin Palmer <austinp@valvesoftware.com> Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 5.2+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-10-18HID: i2c-hid: Remove runtime power managementKai-Heng Feng
Runtime power management in i2c-hid brings lots of issues, such as: - When transitioning from display manager to desktop session, i2c-hid was closed and opened, so the device was set to SLEEP and ON in a short period. Vendors confirmed that their devices can't handle fast ON/SLEEP command because Windows doesn't have this behavior. - When rebooting, i2c-hid was closed, and the driver core put the device back to full power before shutdown. This behavior also triggers a quick SLEEP and ON commands that some devices can't handle, renders an unusable touchpad after reboot. - Most importantly, my power meter reports little to none energy saving when i2c-hid is runtime suspended. So let's remove runtime power management since there is no actual benefit. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-10-18x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guardZhenzhong Duan
When building with "EXTRA_CFLAGS=-Wall" gcc warns: arch/x86/boot/compressed/acpi.c:29:30: warning: get_cmdline_acpi_rsdp defined but not used [-Wunused-function] get_cmdline_acpi_rsdp() is only used when CONFIG_RANDOMIZE_BASE and CONFIG_MEMORY_HOTREMOVE are both enabled, so any build where one of these config options is disabled has this issue. Move the function under the same ifdef guard as the call site. [ tglx: Add context to the changelog so it becomes useful ] Fixes: 41fa1ee9c6d6 ("acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1569719633-32164-1-git-send-email-zhenzhong.duan@oracle.com
2019-10-18x86/hyperv: Set pv_info.name to "Hyper-V"Andrea Parri
Michael reported that the x86/hyperv initialization code prints the following dmesg when running in a VM on Hyper-V: [ 0.000738] Booting paravirtualized kernel on bare hardware Let the x86/hyperv initialization code set pv_info.name to "Hyper-V" so dmesg reports correctly: [ 0.000172] Booting paravirtualized kernel on Hyper-V [ tglx: Folded build fix provided by Yue ] Reported-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191015103502.13156-1-parri.andrea@gmail.com
2019-10-18Merge branch 'acpi-tables'Rafael J. Wysocki
* acpi-tables: ACPI: HMAT: ACPI_HMAT_MEMORY_PD_VALID is deprecated since ACPI-6.3
2019-10-18ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()John Garry
When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <john.garry@huawei.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-18Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpufreq: ACPI: processor: Avoid NULL pointer dereferences at init time cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown * pm-sleep: PM: sleep: include <linux/pm_runtime.h> for pm_wq ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist
2019-10-18dmaengine: qcom: bam_dma: Fix resource leakJeffrey Hugo
bam_dma_terminate_all() will leak resources if any of the transactions are committed to the hardware (present in the desc fifo), and not complete. Since bam_dma_terminate_all() does not cause the hardware to be updated, the hardware will still operate on any previously committed transactions. This can cause memory corruption if the memory for the transaction has been reassigned, and will cause a sync issue between the BAM and its client(s). Fix this by properly updating the hardware in bam_dma_terminate_all(). Fixes: e7c0fe2a5c84 ("dmaengine: add Qualcomm BAM dma driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()Geert Uytterhoeven
As platform_get_irq_by_name() now prints an error when the interrupt does not exist, looping over possibly non-existing interrupts causes the printing of scary messages like: sh_mtu2 fcff0000.timer: IRQ tgi1a not found sh_mtu2 fcff0000.timer: IRQ tgi2a not found Fix this by using the platform_irq_count() helper, to avoid touching non-existent interrupts. Limit the returned number of interrupts to the maximum number of channels currently supported by the driver in a future-proof way, i.e. using ARRAY_SIZE() instead of a hardcoded number. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016143003.28561-1-geert+renesas@glider.be
2019-10-17scsi: lpfc: remove left-over BUILD_NVME definesHannes Reinecke
The BUILD_NVME define never got defined anywhere, causing NVMe commands to be treated as SCSI commands when freeing the buffers. This was causing a stuck discovery and a horrible crash in lpfc_set_rrq_active() later on. Link: https://lore.kernel.org/r/20191017150019.75769-1-hare@suse.de Fixes: c00f62e6c546 ("scsi: lpfc: Merge per-protocol WQ/CQ pairs into single per-cpu pair") Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-17scsi: core: try to get module before removing deviceYufen Yu
We have a test case like block/001 in blktests, which will create a scsi device by loading scsi_debug module and then try to delete the device by sysfs interface. At the same time, it may remove the scsi_debug module. And getting a invalid paging request BUG_ON as following: [ 34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8 [ 34.629189] Oops: 0000 [#1] SMP PTI [ 34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G W 5.4.0-rc3+ #473 [ 34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0 [ 34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0 [ 34.644545] Call Trace: [ 34.644907] scsi_host_dev_release+0x6b/0x1f0 [ 34.645511] device_release+0x74/0x110 [ 34.646046] kobject_put+0x116/0x390 [ 34.646559] put_device+0x17/0x30 [ 34.647041] scsi_target_dev_release+0x2b/0x40 [ 34.647652] device_release+0x74/0x110 [ 34.648186] kobject_put+0x116/0x390 [ 34.648691] put_device+0x17/0x30 [ 34.649157] scsi_device_dev_release_usercontext+0x2e8/0x360 [ 34.649953] execute_in_process_context+0x29/0x80 [ 34.650603] scsi_device_dev_release+0x20/0x30 [ 34.651221] device_release+0x74/0x110 [ 34.651732] kobject_put+0x116/0x390 [ 34.652230] sysfs_unbreak_active_protection+0x3f/0x50 [ 34.652935] sdev_store_delete.cold.4+0x71/0x8f [ 34.653579] dev_attr_store+0x1b/0x40 [ 34.654103] sysfs_kf_write+0x3d/0x60 [ 34.654603] kernfs_fop_write+0x174/0x250 [ 34.655165] __vfs_write+0x1f/0x60 [ 34.655639] vfs_write+0xc7/0x280 [ 34.656117] ksys_write+0x6d/0x140 [ 34.656591] __x64_sys_write+0x1e/0x30 [ 34.657114] do_syscall_64+0xb1/0x400 [ 34.657627] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 34.658335] RIP: 0033:0x7f156f337130 During deleting scsi target, the scsi_debug module have been removed. Then, sdebug_driver_template belonged to the module cannot be accessd, resulting in scsi_proc_hostdir_rm() BUG_ON. To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to increase refcount of module, avoiding the module been removed. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191015130556.18061-1-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-17scsi: hpsa: add missing hunks in reset-patchDon Brace
Correct returning from reset before outstanding commands are completed for the device. Link: https://lore.kernel.org/r/157107623870.17997.11208813089704833029.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-17scsi: target: core: Do not overwrite CDB byte 1Bodo Stroesser
passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-17net: Update address for MediaTek ethernet driver in MAINTAINERSSean Wang
Update maintainers for MediaTek ethernet driver with Mark Lee. He is familiar with MediaTek mt762x series ethernet devices and will keep following maintenance from the vendor side. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main thing here is a long-awaited workaround for a CPU erratum on ThunderX2 which we have developed in conjunction with engineers from Cavium/Marvell. At the moment, the workaround is unconditionally enabled for affected CPUs at runtime but we may add a command-line option to disable it in future if performance numbers show up indicating a significant cost for real workloads. Summary: - Work around Cavium/Marvell ThunderX2 erratum #219 - Fix regression in mlock() ABI caused by sign-extension of TTBR1 addresses - More fixes to the spurious kernel fault detection logic - Fix pathological preemption race when enabling some CPU features at boot - Drop broken kcore macros in favour of generic implementations - Fix userspace view of ID_AA64ZFR0_EL1 when SVE is disabled - Avoid NULL dereference on allocation failure during hibernation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: tags: Preserve tags for addresses translated via TTBR1 arm64: mm: fix inverted PAR_EL1.F check arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled arm64: hibernate: check pgd table allocation arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled arm64: Fix kcore macros after 52-bit virtual addressing fallout arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected arm64: Avoid Cavium TX2 erratum 219 when switching TTBR arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
2019-10-17ipv4: fix race condition between route lookup and invalidationWei Wang
Jesse and Ido reported the following race condition: <CPU A, t0> - Received packet A is forwarded and cached dst entry is taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set() <t1> - Given Jesse has busy routers ("ingesting full BGP routing tables from multiple ISPs"), route is added / deleted and rt_cache_flush() is called <CPU B, t2> - Received packet B tries to use the same cached dst entry from t0, but rt_cache_valid() is no longer true and it is replaced in rt_cache_route() by the newer one. This calls dst_dev_put() on the original dst entry which assigns the blackhole netdev to 'dst->dev' <CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due to 'dst->dev' being the blackhole netdev There are 2 issues in the v4 routing code: 1. A per-netns counter is used to do the validation of the route. That means whenever a route is changed in the netns, users of all routes in the netns needs to redo lookup. v6 has an implementation of only updating fn_sernum for routes that are affected. 2. When rt_cache_valid() returns false, rt_cache_route() is called to throw away the current cache, and create a new one. This seems unnecessary because as long as this route does not change, the route cache does not need to be recreated. To fully solve the above 2 issues, it probably needs quite some code changes and requires careful testing, and does not suite for net branch. So this patch only tries to add the deleted cached rt into the uncached list, so user could still be able to use it to receive packets until it's done. Fixes: 95c47f9cf5e0 ("ipv4: call dst_dev_put() properly") Signed-off-by: Wei Wang <weiwan@google.com> Reported-by: Ido Schimmel <idosch@idosch.org> Reported-by: Jesse Hathaway <jesse@mbuki-mvuki.org> Tested-by: Jesse Hathaway <jesse@mbuki-mvuki.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17Merge tag 'xtensa-20191017' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa fixes from Max Filippov: - fix {get,put}_user() for 64bit values - fix warning about static EXPORT_SYMBOL from modpost - fix PCI IO ports mapping for the virt board - fix pasto in change_bit for exclusive access option * tag 'xtensa-20191017' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix change_bit in exclusive access option xtensa: virt: fix PCI IO ports mapping xtensa: drop EXPORT_SYMBOL for outs*/ins* xtensa: fix type conversion in __get_user_[no]check xtensa: clean up assembly arguments in uaccess macros xtensa: fix {get,put}_user() for 64bit values
2019-10-17ipv4: Return -ENETUNREACH if we can't create route but saddr is validStefano Brivio
...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address. Incidentally, this is not an issue anymore since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington. To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well. In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer(). In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout. Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route. While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e3827048 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one: I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect. Also note that after commit fc75fc8339e7 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent. Reported-by: Stefan Walter <walteste@inf.ethz.ch> Analysed-by: Benjamin Coddington <bcodding@redhat.com> Analysed-by: Gonzalo Siero <gsierohu@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: phy: micrel: Update KSZ87xx PHY nameMarek Vasut
The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYsMarek Vasut
The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs in the micrel PHY driver, it is used even with the KSZ87xx switch. This is wrong, since the KSZ8051 configures registers of the PHY which are not present on the simplified KSZ87xx switch PHYs and misconfigures other registers of the KSZ87xx switch PHYs. Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the KSZ87xx switch by checking the Basic Status register Bit 0, which is read-only and indicates presence of the Extended Capability Registers. The KSZ8051 PHY has those registers while the KSZ87xx switch does not. This patch implements simple check for the presence of this bit for both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct PHY driver instance. Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17io_uring: fix logic error in io_timeoutyangerkun
If ctx->cached_sq_head < nxt_sq_head, we should add UINT_MAX to tmp, not tmp_nxt. Fixes: 5da0fb1ab34c ("io_uring: consider the overflow of sequence for timeout req") Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-17io_uring: fix up O_NONBLOCK handling for socketsJens Axboe
We've got two issues with the non-regular file handling for non-blocking IO: 1) We don't want to re-do a short read in full for a non-regular file, as we can't just read the data again. 2) For non-regular files that don't support non-blocking IO attempts, we need to punt to async context even if the file is opened as non-blocking. Otherwise the caller always gets -EAGAIN. Add two new request flags to handle these cases. One is just a cache of the inode S_ISREG() status, the other tells io_uring that we always need to punt this request to async context, even if REQ_F_NOWAIT is set. Cc: stable@vger.kernel.org Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com> Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-17Merge tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "The single fix converts the seconds field in the recently added XFS bulkstat structure to a signed 64-bit quantity. The structure layout doesn't change and so far there are no users of the ioctl to break because we only publish xfs ioctl interfaces through the XFS userspace development libraries, and we're still working on a 5.3 release" * tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: change the seconds fields in xfs_bulkstat to signed
2019-10-17drm/amdgpu/vce: fix allocation size in enc ring testAlex Deucher
We need to allocate a large enough buffer for the feedback buffer, otherwise the IB test can overwrite other memory. Reviewed-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-17drm/amdgpu: fix error handling in amdgpu_bo_list_createChristian König
We need to drop normal and userptr BOs separately. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amdgpu: fix potential VM faultsChristian König
When we allocate new page tables under memory pressure we should not evict old ones. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amdgpu: user pages array memory leak fixPhilip Yang
user_pages array should always be freed after validation regardless if user pages are changed after bo is created because with HMM change parse bo always allocate user pages array to get user pages for userptr bo. v2: remove unused local variable and amend commit v3: add back get user pages in gem_userptr_ioctl, to detect application bug where an userptr VMA is not ananymous memory and reject it. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1844962 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Joe Barnett <thejoe@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.3
2019-10-17drm/amdgpu/vcn: fix allocation size in enc ring testAlex Deucher
We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory. - Session info is 128K according to mesa - Use the same session info for create and destroy Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-17drm/amdgpu/uvd7: fix allocation size in enc ring test (v2)Alex Deucher
We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory. v2: - session info is 128K according to mesa - use the same session info for create and destroy Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-17drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)Alex Deucher
We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory. v2: - session info is 128K according to mesa - use the same session info for create and destroy Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-17Merge tag 'drm-fixes-2019-10-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This is this weeks fixes for drm. The dma-resv one is probably the more important one a fair few people have reported it, besides that it's a couple of panfrost, a few i915 and a few amdgpu fixes. One radeon patch to fix some ppc64 related issues caused an x86 regression so is getting reverted for now. Summary: dma-resv: - shared fences for lima/panfrost ttm: - prefault regression fix - lifetime fix panfrost: - stopped job timeout fix - missing register values amdgpu: - smu7 powerplay fix - bail earlier for cik/si detection - navi SDMA fix radeon: - revert a ppc64 shutdown fix that broke x86 i915: - VBT information handling fix - Circular locking fix - preemption vs resubmission virtual requests fix" * tag 'drm-fixes-2019-10-18' of git://anongit.freedesktop.org/drm/drm: drm/i915: Fixup preempt-to-busy vs resubmission of a virtual request drm/i915/userptr: Never allow userptr into the mappable GGTT drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin drm/i915/execlists: Refactor -EIO markup of hung requests drm/panfrost: Handle resetting on timeout better drm/panfrost: Add missing GPU feature registers drm/ttm: fix handling in ttm_bo_add_mem_to_lru drm/ttm: Restore ttm prefaulting drm/ttm: fix busy reference in ttm_mem_evict_first drm/amdgpu/sdma5: fix mask value of POLL_REGMEM packet for pipe sync drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1 Revert "drm/radeon: Fix EEH during kexec" drm/msm/dsi: Implement reset correctly dma-buf/resv: fix exclusive fence get drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50 drm/tiny: Kconfig: Remove always-y THERMAL dep. from TINYDRM_REPAPER drm/amdgpu/powerplay: fix typo in mvdd table setup
2019-10-17Merge branch 'errata/tx2-219' into for-next/fixesWill Deacon
Workaround for Cavium/Marvell ThunderX2 erratum #219. * errata/tx2-219: arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected arm64: Avoid Cavium TX2 erratum 219 when switching TTBR arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
2019-10-18Merge tag 'drm-misc-fixes-2019-10-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes -dma-resv: Change shared_count to post-increment to fix lima crash (Qiang) -ttm: A couple fixes related to lifetime and restore prefault behavior (Christian & Thomas) -panfrost: Fill in missing feature reg values and fix stoppedjob timeouts (Steven) Cc: Qiang Yu <yuq825@gmail.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Christian König <christian.koenig@amd.com> Cc: Steven Price <steven.price@arm.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191017203419.GA142909@art_vandelay
2019-10-17IB/hfi1: Use a common pad buffer for 9B and 16B packetsMike Marciniszyn
There is no reason for a different pad buffer for the two packet types. Expand the current buffer allocation to allow for both packet types. Fixes: f8195f3b14a0 ("IB/hfi1: Eliminate allocation while atomic") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-17IB/hfi1: Avoid excessive retry for TID RDMA READ requestKaike Wan
A TID RDMA READ request could be retried under one of the following conditions: - The RC retry timer expires; - A later TID RDMA READ RESP packet is received before the next expected one. For the latter, under normal conditions, the PSN in IB space is used for comparison. More specifically, the IB PSN in the incoming TID RDMA READ RESP packet is compared with the last IB PSN of a given TID RDMA READ request to determine if the request should be retried. This is similar to the retry logic for noraml RDMA READ request. However, if a TID RDMA READ RESP packet is lost due to congestion, header suppresion will be disabled and each incoming packet will raise an interrupt until the hardware flow is reloaded. Under this condition, each packet KDETH PSN will be checked by software against r_next_psn and a retry will be requested if the packet KDETH PSN is later than r_next_psn. Since each TID RDMA READ segment could have up to 64 packets and each TID RDMA READ request could have many segments, we could make far more retries under such conditions, and thus leading to RETRY_EXC_ERR status. This patch fixes the issue by removing the retry when the incoming packet KDETH PSN is later than r_next_psn. Instead, it resorts to RC timer and normal IB PSN comparison for any request retry. Fixes: 9905bf06e890 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20191004204035.26542.41684.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-17perf trace: Introduce 'struct evsel__trace' for evsel->priv needsArnaldo Carvalho de Melo
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets but as well have a pointer to the syscall_fmt_arg array for the fields, so that we can expand strings in filter expressions, so introduce a 'struct evsel_trace' to have in evsel->priv that allows for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-hx8ukasuws5sz6rsar73cocv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-17perf trace: Hide evsel->access further, simplify codeArnaldo Carvalho de Melo
Next step will be to have a 'struct evsel_trace' to allow for handling the syscalls tracepoints via the strace-like code while reusing parts of that code with the other tracepoints, where we don't have things like the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?) args that we want to cache offsets and have been using evsel->priv for that, while for the other tracepoints we'll have just an array of 'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and ->strtoul() string->number conversions and other state those functions need). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fre21jbyoqxmmquxcho7oa0x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-17perf trace: Introduce accessors to trace specific evsel->privArnaldo Carvalho de Melo
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in raw_syscalls:sys_{enter,exit} to cache the offset of the common fields, the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret for sys_exit. And for the rest of the tracepoints we use it to have a syscall_arg_fmt array to have scnprintf/strtoul for tracepoint args. So we better clearly mark them with accessors so that we can move to having a 'struct evsel_trace' struct for all 'perf trace' specific evsel->priv usage. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dcoyxfslg7atz821tz9aupjh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-17perf trace: Show error message when not finding a field used in a filter ↵Arnaldo Carvalho de Melo
expression It was there, but as pr_debug(), make it pr_err() so that we can see it without -v: # trace -e syscalls:*lseek --filter="whenc==SET" sleep 1 "whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET" # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ly4rgm1bto8uwc2itpaixjob@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-18Merge tag 'drm-fixes-5.4-2019-10-16' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-10-16: amdgpu: - Powerplay fix for SMU7 parts - Bail earlier when cik/si support is not set to 1 - Fix an SDMA issue on navi radeon: - revert a PPC fix which broken x86 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191017022443.3853-1-alexander.deucher@amd.com
2019-10-18Merge tag 'drm-intel-fixes-2019-10-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Display fix on handling VBT information. - Important circular locking fix - Fix for preemption vs resubmission on virtual requests - and a prep patch to make this last one to apply cleanly Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191017135444.GA12255@intel.com
2019-10-17RDMA/mlx5: Clear old rate limit when closing QPRafi Wiener
Before QP is closed it changes to ERROR state, when this happens the QP was left with old rate limit that was already removed from the table. Fixes: 7d29f349a4b9 ("IB/mlx5: Properly adjust rate limit on QP state transitions") Signed-off-by: Rafi Wiener <rafiw@mellanox.com> Signed-off-by: Oleg Kuporosov <olegk@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-17net: dsa: microchip: Add shared regmap mutexMarek Vasut
The KSZ driver uses one regmap per register width (8/16/32), each with it's own lock, but accessing the same set of registers. In theory, it is possible to create a race condition between these regmaps, although the underlying bus (SPI or I2C) locking should assure nothing bad will really happen and the accesses would be correct. To make the driver do the right thing, add one single shared mutex for all the regmaps used by the driver instead. This assures that even if some future hardware is on a bus which does not serialize the accesses the same way SPI or I2C does, nothing bad will happen. Note that the status_mutex was unused and only initied, hence it was renamed and repurposed as the regmap mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: dsa: microchip: Do not reinit mutexes on KSZ87xxMarek Vasut
The KSZ87xx driver calls mutex_init() on mutexes already inited in ksz_common.c ksz_switch_register(). Do not do it twice, drop the reinitialization. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17perf/ring_buffer: Matching the memory allocate and free, in rb_alloc()Yunfeng Ye
Currently perf_mmap_alloc_page() is used to allocate memory in rb_alloc(), but using free_page() to free memory in the failure path. It's better to use perf_mmap_free_page() instead. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.co> Cc: <acme@kernel.org> Cc: <mingo@redhat.com> Cc: <mark.rutland@arm.com> Cc: <namhyung@kernel.org> Cc: <alexander.shishkin@linux.intel.com> Link: https://lkml.kernel.org/r/575c7e8c-90c7-4e3a-b41d-f894d8cdbd7f@huawei.com
2019-10-17perf/ring_buffer: Modify the parameter type of perf_mmap_free_page()Yunfeng Ye
In perf_mmap_free_page(), the unsigned long type is converted to the pointer type, but where the call is made, the pointer type is converted to the unsigned long type. There is no need to do these operations. Modify the parameter type of perf_mmap_free_page() to pointer type. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.co> Cc: <acme@kernel.org> Cc: <mingo@redhat.com> Cc: <mark.rutland@arm.com> Cc: <namhyung@kernel.org> Cc: <alexander.shishkin@linux.intel.com> Link: https://lkml.kernel.org/r/e6ae3f0c-d04c-50f9-544a-aee3b30330cd@huawei.com
2019-10-17perf_event: Add support for LSM and SELinux checksJoel Fernandes (Google)
In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-17net: stmmac: fix argument to stmmac_pcs_ctrl_ane()Ben Dooks (Codethink)
The stmmac_pcs_ctrl_ane() expects a register address as argument 1, but for some reason the mac_device_info is being passed. Fix the warning (and possible bug) from sparse: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] <asn:2> *ioaddr drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17Merge branch 'dpaa2-eth-misc-fixes'David S. Miller
Ioana Ciornei says: ==================== dpaa2-eth: misc fixes This patch set adds a couple of fixes around updating configuration on MAC change. Depending on when MC connects the DPNI to a MAC, both the MAC address and TX FQIDs should be updated everytime there is a change in configuration. Changes in v2: - used reverse christmas tree ordering in patch 2/2 Changes in v3: - add a missing new line - go back to FQ based enqueueing after a transient error ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17dpaa2-eth: Fix TX FQID valuesIoana Radulescu
Depending on when MC connects the DPNI to a MAC, Tx FQIDs may not be available during probe time. Read the FQIDs each time the link goes up to avoid using invalid values. In case an error occurs or an invalid value is retrieved, fall back to QDID-based enqueueing. Fixes: 1fa0f68c9255 ("dpaa2-eth: Use FQ-based DPIO enqueue API") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 10:09:04 +0000