summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-30iio: imu: inv_mpu6050: Use upper_16_bits()/lower_16_bits() helpersAndy Shevchenko
Use upper_16_bits()/lower_16_bits() helpers instead of open-coding them. This is easier to scan quickly compared to bitwise manipulation, and it is pleasingly symmetric. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20240904184543.1219866-1-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: cm32181: Remove duplicate ACPI handle checkAndy Shevchenko
cm32181_acpi_parse_cpm_tables() is a no-op if ACPI handle is not available. Remove duplicate ACPI handle check at the caller side. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240904183646.1219485-1-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Remove config error check for IIR filter updatesVasileios Amoiridis
When there is a change in the configuration of the BMP3xx device, several steps take place. These steps include: 1) Update the OSR settings and check if there was an update 2) Update the ODR settings and check if there was an update 3) Update the IIR settings and check if there was an update 4) Check if there was an update with the following procedure: a) Set sensor to SLEEP mode and after to NORMAL mode to trigger a new measurement. b) Wait the maximum amount possible depending on the OSR settings c) Check the configuration error register if there was an error during the configuration of the sensor. This check is necessary, because there could be a case where the OSR is too high for the requested ODR so either the ODR needs to be slower or the OSR needs to be less. This is something that is checked internally by the sensor when it runs in NORMAL mode. In the BMP58x devices the previous steps are done internally by the sensor. The IIR filter settings do not depend on the OSR or ODR settings, and there is no need to run a check in case they change. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-4-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Add support for bmp280 soft resetVasileios Amoiridis
The BM(P/E)28x devices have an option for soft reset which is also recommended by the Bosch Sensortech BME2 Sensor API to be used before the initial configuration of the device. Link: https://github.com/boschsensortec/BME280_SensorAPI/blob/bme280_v3.5.1/bme280.c#L429 Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-3-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Use bulk read for humidity calibration dataVasileios Amoiridis
Convert individual reads to a bulk read for the humidity calibration data. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-2-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: event_monitor: Fix missing free in mainzhang jiao
Free string allocated by asprintf(). Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Link: https://patch.msgid.link/20240904080533.104279-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: hid-sensor-press: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-23-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: position: hid-sensor-custom-intel-hinge: Get platform data via ↵Andy Shevchenko
dev_get_platdata() Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-22-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: orientation: hid-sensor-rotation: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-21-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: orientation: hid-sensor-incl-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-20-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: magnetometer: hid-sensor-magn-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-19-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: lm3533-als: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20240902222824.1145571-18-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: hid-sensor-prox: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-17-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: hid-sensor-als: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-16-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-15-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: gyro: hid-sensor-gyro-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-14-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: frequency: adf4350: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-13-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: frequency: ad9523: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-12-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: max517: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-11-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: m62332: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-10-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: ad5791: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-9-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: ad5504: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-8-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ltc2497: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. While at it, drop duplicate NULL check that iio_map_array_register() already has. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-7-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7793: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-6-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7887: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-5-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7791: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-4-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7266: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-3-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: accel: hid-sensor-accel-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-2-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: hid-sensor: Use aligned data type for timestampAndy Shevchenko
Use aligned_s64 for the timestamp field. Note, the actual data is signed, hence with this we also amend that. While at it, drop redundant __alignment directive. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: st_lsm6dsx: Use aligned data type for timestampAndy Shevchenko
Use aligned_s64 for the timestamp field. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30types: Complement the aligned types with signed 64-bit oneAndy Shevchenko
Some user may want to use aligned signed 64-bit type. Provide it for them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: sx_common: Drop unused acpi.hAndy Shevchenko
There are drivers that do not need acpi.h, drop unused inclusion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903212922.3731221-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: sx_common: Unexport sx_common_get_raw_register_config()Andy Shevchenko
sx_common_get_raw_register_config() is used in a single driver, move it there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903212922.3731221-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: fxos8700: Drop unused acpi.hAndy Shevchenko
There are drivers that do not need acpi.h, drop unused inclusion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903212922.3731221-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: addac: ad74xxx: Constify struct iio_chan_spec​Christophe JAILLET
'struct iio_chan_spec' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 35749 5879 384 42012 a41c drivers/iio/addac/ad74115.o 32242 3297 384 35923 8c53 drivers/iio/addac/ad74413r.o After: ===== text data bss dec hex filename 39109 2519 384 42012 a41c drivers/iio/addac/ad74115.o 33842 1697 384 35923 8c53 drivers/iio/addac/ad74413r.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/da291278e78b983ea2e657a25769f7d82ea2a6d0.1725717045.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240901135950.797396-16-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: magn: ak8974: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20240901135950.797396-15-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: st_uvis25: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240901135950.797396-14-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: st_lsm6dsx: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240901135950.797396-13-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: inv_mpu6050: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-12-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: inv_icm42600: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-11-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: bmi323: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-10-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: bmi160: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-9-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: humidity: hts221: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-8-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: gyro: mpu3050: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Tweaked ordering wrt to comment whilst here. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: gyro: fxas21002c: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-6-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: common: st: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Tweak ordering to put the comment before we get the trigger type. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-5-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ti-ads1015: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-4-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: accel: fxls8962af: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20240901135950.797396-3-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: accel: adxl380: use irq_get_trigger_type()Jonathan Cameron
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-23 03:40:43 +0000