summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-12dt-bindings: pinctrl: at91-pio4: add slew-rateClaudiu Beznea
Document slew-rate DT binding for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1611747945-29960-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12pinctrl: actions: Add depends on || COMPILE_TESTLinus Walleij
I happened to apply the v1 of the patch restriction the selection to ARM or ARM64, sorry for my sloppiness. Fixing up the mistake as I can't back the patch out now. Fixes: 5784921f7b6c ("pinctrl: actions: Add the platform dependency to drivers") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12pinctrl: single: set function name when adding functionDrew Fustini
pcs_add_function() fails to set the function name in struct pcs_function when adding a new function. As a result this line in pcs_set_mux(): dev_dbg(pcs->dev, "enabling %s function%i\n", func->name, fselector); prints "(null)" for the function: pinctrl-single 44e10800.pinmux: enabling (null) function0 pinctrl-single 44e10800.pinmux: enabling (null) function1 pinctrl-single 44e10800.pinmux: enabling (null) function2 pinctrl-single 44e10800.pinmux: enabling (null) function3 With this fix, the output is now: pinctrl-single 44e10800.pinmux: enabling pinmux-uart0-pins function0 pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function1 pinctrl-single 44e10800.pinmux: enabling pinmux-i2c0-pins function2 pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function3 Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Robert Nelson <robertcnelson@beagleboard.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210125203542.51513-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12spi: Skip zero-length transfers in spi_transfer_one_message()Nicolas Saenz Julienne
With the introduction of 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops") it has become apparent that some users might initiate zero-length SPI transfers. A fact the micro-optimization omitted, and which turned out to cause crashes[1]. Instead of changing the micro-optimization itself, use a bigger hammer and skip zero-length transfers altogether for drivers using the default transfer_one_message() implementation. Reported-by: Phil Elwell <phil@raspberrypi.com> Fixes: 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> [1] https://github.com/raspberrypi/linux/issues/4100 Link: https://lore.kernel.org/r/20210211180820.25757-1-nsaenzjulienne@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12spi: dw: Avoid stack content exposureKees Cook
Since "data" is u32, &data is a "u32 *" type, which means pointer math will move in u32-sized steps. This was meant to be a byte offset, so cast &data to "char *" to aim the copy into the correct location. Seen with -Warray-bounds (and found by Coverity): In file included from ./include/linux/string.h:269, from ./arch/powerpc/include/asm/paca.h:15, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/mutex.h:14, from ./include/linux/notifier.h:14, from ./include/linux/clk.h:14, from drivers/spi/spi-dw-bt1.c:12: In function 'memcpy', inlined from 'dw_spi_bt1_dirmap_copy_from_map' at drivers/spi/spi-dw-bt1.c:87:3: ./include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset 4 is out of the bounds [0, 4] of object 'data' with type 'u32' {aka 'unsigned int'} [-Warray-bounds] 20 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:191:9: note: in expansion of macro '__underlying_memcpy' 191 | return __underlying_memcpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~ drivers/spi/spi-dw-bt1.c: In function 'dw_spi_bt1_dirmap_copy_from_map': drivers/spi/spi-dw-bt1.c:77:6: note: 'data' declared here 77 | u32 data; | ^~~~ Addresses-Coverity: CID 1497771 Out-of-bounds access Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20210211203714.1929862-1-keescook@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12Merge branch 'x86/cleanups' into x86/mmIngo Molnar
Merge recent cleanups to the x86 MM code to resolve a conflict. Conflicts: arch/x86/mm/fault.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12ASoC: soc-pcm: add soc_pcm_hw_update_format()Kuninori Morimoto
We have soc_pcm_hw_update_xxx() now. This patch creates same function for format. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/87pn1g90oa.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12ASoC: soc-pcm: add soc_pcm_hw_update_chan()Kuninori Morimoto
We have soc_pcm_hw_update_rate() now. This patch creates same function for chan. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/87r1lw90oo.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12ASoC: soc-pcm: add soc_pcm_hw_update_rate()Kuninori Morimoto
To update hw, we need to follow setting order 1) set hw->rates 2) call snd_pcm_limit_hw_rates() 3) update hw->rate_min/max To avoid random settings, this patch adds new soc_pcm_hw_update_rate() and share updating code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/87sg6c90qv.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12regulator: bd718x7, bd71828, Fix dvs voltage levelsMatti Vaittinen
The ROHM BD718x7 and BD71828 drivers support setting HW state specific voltages from device-tree. This is used also by various in-tree DTS files. These drivers do incorrectly try to compose bit-map using enum values. By a chance this works for first two valid levels having values 1 and 2 - but setting values for the rest of the levels do indicate capability of setting values for first levels as well. Luckily the regulators which support setting values for SUSPEND/LPSR do usually also support setting values for RUN and IDLE too - thus this has not been such a fatal issue. Fix this by defining the old enum values as bits and fixing the parsing code. This allows keeping existing IC specific drivers intact and only slightly changing the rohm-regulator.c Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12io_uring: don't split out consume out of SQE getPavel Begunkov
Remove io_consume_sqe() and inline it back into io_get_sqe(). It requires req dealloc on error, but in exchange we get cleaner io_submit_sqes() and better locality for cached_sq_head. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12io_uring: save ctx put/get for task_work submitPavel Begunkov
Do a little trick in io_ring_ctx_free() briefly taking uring_lock, that will wait for everyone currently holding it, so we can skip pinning ctx with ctx->refs for __io_req_task_submit(), which is executed and loses its refs/reqs while holding the lock. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12io_uring: don't duplicate io_req_task_queue()Pavel Begunkov
Don't hand code io_req_task_queue() inside of io_async_buf_func(), just call it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12io_uring: optimise SQPOLL mm/files grabbingPavel Begunkov
There are two reasons for this. First is to optimise io_sq_thread_acquire_mm_files() for non-SQPOLL case, which currently do too many checks and function calls in the hot path, e.g. in io_init_req(). The second is to not grab mm/files when there are not needed. As __io_queue_sqe() issues only one request now, we can reuse io_sq_thread_acquire_mm_files() instead of unconditional acquire mm/files. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12io_uring: optimise out unlikely link queuePavel Begunkov
__io_queue_sqe() tries to issue as much requests of a link as it can, and uses io_put_req_find_next() to extract a next one, targeting inline completed requests. As now __io_queue_sqe() is always used together with struct io_comp_state, it leaves next propagation only a small window and only for async reqs, that doesn't justify its existence. Remove it, make __io_queue_sqe() to issue only a head request. It simplifies the code and will allow other optimisations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12io_uring: take compl state from submit statePavel Begunkov
Completion and submission states are now coupled together, it's weird to get one from argument and another from ctx, do it consistently for io_req_free_batch(). It's also faster as we already have @state cached in registers. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-12Merge branch 'for-mingo-nolibc' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull nolibc fixes from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12Merge branch 'for-mingo-rcu' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return addresses to more easily locate bugs. This has a couple of RCU-related commits, but is mostly MM. Was pulled in with akpm's agreement. - Per-callback-batch tracking of numbers of callbacks, which enables better debugging information and smarter reactions to large numbers of callbacks. - The first round of changes to allow CPUs to be runtime switched from and to callback-offloaded state. - CONFIG_PREEMPT_RT-related changes. - RCU CPU stall warning updates. - Addition of polling grace-period APIs for SRCU. - Torture-test and torture-test scripting updates, including a "torture everything" script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale. Plus does an allmodconfig build. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12Merge branch 'for-mingo-lkmm' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull LKMM updates from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12Merge branch 'for-mingo-kcsan' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull KCSAN updates from Paul E. McKenney: "Kernel concurrency sanitizer (KCSAN) updates from Marco Elver." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12Merge branch 'linus' into locking/core, to pick up upstream fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-12spmi: spmi-pmic-arb: Fix hw_irq overflowSubbaraman Narayanamurthy
Currently, when handling the SPMI summary interrupt, the hw_irq number is calculated based on SID, Peripheral ID, IRQ index and APID. This is then passed to irq_find_mapping() to see if a mapping exists for this hw_irq and if available, invoke the interrupt handler. Since the IRQ index uses an "int" type, hw_irq which is of unsigned long data type can take a large value when SID has its MSB set to 1 and the type conversion happens. Because of this, irq_find_mapping() returns 0 as there is no mapping for this hw_irq. This ends up invoking cleanup_irq() as if the interrupt is spurious whereas it is actually a valid interrupt. Fix this by using the proper data type (u32) for id. Cc: stable@vger.kernel.org Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Link: https://lore.kernel.org/r/1612812784-26369-1-git-send-email-subbaram@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210212031417.3148936-1-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12Merge tag 'soundwire-2_5.12-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire second update for 5.12-rc1 Some late changes for sdw: - fix for crash on intel driver - support for _no_pm IO calls in sdw regmap * tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected
2021-02-12mmc: mmc_test: use erase_arg for mmc_erase commandYann Gautier
Since [1], the erase argument for mmc_erase() function is saved in erase_arg field of card structure. It is preferable to use it instead of hard-coded MMC_SECURE_ERASE_ARG, which from eMMC 4.51 spec is not recommended: "6.6.16 Secure Erase NOTE Secure Erase is included for backwards compatibility. New system level implementations (based on v4.51 devices and beyond) should use Erase combined with Sanitize instead of secure erase." On STM32MP157C-EV1 board, embedding a THGBMDG5D1LBAIL eMMC, using MMC_ERASE command with MMC_SECURE_ERASE_ARG may stuck the STM32 SDMMC IP, if test 37 or test 38 are launched just after a write test, e.g. test 36. Using the default MMC_ERASE argument from framework with erase_arg, which default in our case to MMC_DISCARD_ARG does no more trig the issue. [1] commit 01904ff77676 ("mmc: core: Calculate the discard arg only once") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210209145214.10518-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-12iommu/amd: Fix performance counter initializationSuravee Suthikulpanit
Certain AMD platforms enable power gating feature for IOMMU PMC, which prevents the IOMMU driver from updating the counter while trying to validate the PMC functionality in the init_iommu_perf_ctr(). This results in disabling PMC support and the following error message: "AMD-Vi: Unable to read/write to IOMMU perf counter" To workaround this issue, disable power gating temporarily by programming the counter source to non-zero value while validating the counter, and restore the prior state afterward. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Tj (Elloe Linux) <ml.linux@elloe.vision> Link: https://lore.kernel.org/r/20210208122712.5048-1-suravee.suthikulpanit@amd.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-12i2c: remove redundant error print in stm32f7_i2c_probeMenglong Dong
Coccinelle reports a redundant error print in stm32f7_i2c_probe. As 'platform_get_irq' already prints the error message, error print here is redundant and can be removed. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12i2c: stm32f7: fix configuration of the digital filterAlain Volmat
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12i2c: testunit: add support for block process callsWolfram Sang
Devices offering SMBus block process calls are rare, so add it to the testunit. This is also a good test case for testing proper I2C_M_RECV_LEN flag handling of I2C bus masters emulating SMBus. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12backlight/video: Use Platform getter/setter functionsJulia Lawall
Use getter and setter functions, for platform_device structures and a spi_device structure. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-12nl80211: add documentation for HT/VHT/HE disable attributesJohannes Berg
These were missed earlier, add the necessary documentation and, while at it, clarify it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210212105023.895c3389f063.I46dea3bfc64385bc6f600c50d294007510994f8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12staging: greybus: Fixed alignment issue in hid.cPritthijit Nath
This change fixes a checkpatch CHECK style issue for "Alignment should match open parenthesis". Signed-off-by: Pritthijit Nath <pritthijit.nath@icloud.com> Link: https://lore.kernel.org/r/20210212081835.9497-1-pritthijit.nath@icloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12staging: wfx: remove unused included header filesMuhammad Usama Anjum
Many header files have been included, but never used. Those header files have been removed. Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com> Link: https://lore.kernel.org/r/20210211143637.GA177425@LEGION Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12staging: nvec: minor coding style fixFatih Yildirim
Fix for the below coding style warning. Warning: Move const after static - use 'static const int' Signed-off-by: Fatih Yildirim <yildirim.fatih@gmail.com> Link: https://lore.kernel.org/r/20210212073423.20562-1-yildirim.fatih@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12staging: wimax: Fix some coding style problemHemansh Agnihotri
This fixes checkpatch error "open brace '{' following struct go on the same line" in file drivers/staging/wimax/i2400m/rx.c . Signed-off-by: Hemansh Agnihotri <hemanshagnihotri27@gmail.com> Link: https://lore.kernel.org/r/20210212033256.2116-1-hemanshagnihotri27@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12staging: fbtft: add tearing signal detectCarlis
For st7789v IC, when we need continuous full screen refresh, it is best to wait for the tearing effect line signal to arrive to avoid screen tearing. Signed-off-by: Carlis <zhangxuezhi1@yulong.com> Link: https://lore.kernel.org/r/1612706517-124617-1-git-send-email-zhangxuezhi3@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12staging: vt6656: Fixed issue with alignment in rf.cPritthijit Nath
This change fixes a checkpatch CHECK style issue for "Alignment should match open parenthesis". Signed-off-by: Pritthijit Nath <pritthijit.nath@icloud.com> Link: https://lore.kernel.org/r/20210211213715.7386-1-pritthijit.nath@icloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12cfg80211/mac80211: Support disabling HE modeBen Greear
Allow user to disable HE mode, similar to how VHT and HT can be disabled. Useful for testing. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20210204144610.25971-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: add STBC encoding to ieee80211_parse_tx_radiotapPhilipp Borgers
This patch adds support for STBC encoding to the radiotap tx parse function. Prior to this change adding the STBC flag to the radiotap header did not encode frames with STBC. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210125150744.83065-1-borgers@mi.fu-berlin.de [use u8_get_bits/u32_encode_bits instead of manually shifting] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: remove sample rate switching code for constrained devicesFelix Fietkau
This was added to mitigate the effects of too much sampling on devices that use a static global fallback table instead of configurable multi-rate retry. Now that the sampling algorithm is improved, this code path no longer performs any better than the standard probing on affected devices. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: show sampling rates in debugfsFelix Fietkau
This makes it easier to see what rates are going to be tested next Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: significantly redesign the rate probing strategyFelix Fietkau
The biggest flaw in current minstrel_ht is the fact that it needs way too many probing packets to be able to quickly find the best rate. Depending on the wifi hardware and operating mode, this can significantly reduce throughput when not operating at the highest available data rate. In order to be able to significantly reduce the amount of rate sampling, we need a much smarter selection of probing rates. The new approach introduced by this patch maintains a limited set of available rates to be tested during a statistics window. They are split into distinct categories: - MINSTREL_SAMPLE_TYPE_INC - incremental rate upgrade: Pick the next rate group and find the first rate that is faster than the current max. throughput rate - MINSTREL_SAMPLE_TYPE_JUMP - random testing of higher rates: Pick a random rate from the next group that is faster than the current max throughput rate. This allows faster adaptation when the link changes significantly - MINSTREL_SAMPLE_TYPE_SLOW - test a rate between max_prob, max_tp2 and max_tp in order to reduce the gap between them In order to prioritize sampling, every 6 attempts are split into 3x INC, 2x JUMP, 1x SLOW. Available rates are checked and refilled on every stats window update. With this approach, we finally get a very small delta in throughput when comparing setting the optimal data rate as a fixed rate vs normal rate control operation. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: reduce the need to sample slower ratesFelix Fietkau
In order to more gracefully be able to fall back to lower rates without too much throughput fluctuations, initialize all untested rates below tested ones to the maximum probabilty of higher rates. Usually this leads to untested lower rates getting initialized with a probability value of 100%, making them better candidates for fallback without having to rely on random probing Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: update total packets counter in tx status pathFelix Fietkau
Keep the update in one place and prepare for further rework Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: use bitfields to encode rate indexesFelix Fietkau
Get rid of a lot of divisions and modulo operations Reduces code size and improves performance Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12cfg80211: initialize reg_rule in __freq_reg_info()Luca Coelho
Sparse started warning on this function because we can potentially return an uninitialized value. The reason is that if the caller passes a min_bw value that is higher then the last value in bws[], we will not go into the loop and reg_rule will remain initialized. This cannot happen because the only caller of this function uses either 1 or 20 in min_bw, but the function will be more robust if we pre-initialize the value. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: fix potential overflow when multiplying to u32 integersColin Ian King
The multiplication of the u32 variables tx_time and estimated_retx is performed using a 32 bit multiplication and the result is stored in a u64 result. This has a potential u32 overflow issue, so avoid this by casting tx_time to a u64 to force a 64 bit multiply. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: enable QoS support for nl80211 ctrl portMarkus Theil
This patch unifies sending control port frames over nl80211 and AF_PACKET sockets a little more. Before this patch, EAPOL frames got QoS prioritization only when using AF_PACKET sockets. __ieee80211_select_queue only selects a QoS-enabled queue for control port frames, when the control port protocol is set correctly on the skb. For the AF_PACKET path this works, but the nl80211 path used ETH_P_802_3. Another check for injected frames in wme.c then prevented the QoS TID to be copied in the frame. In order to fix this, get rid of the frame injection marking for nl80211 ctrl port and set the correct ethernet protocol. Please note: An erlier version of this path tried to prevent frame aggregation for control port frames in order to speed up the initial connection setup a little. This seemed to cause issues on my older Intel dvm-based hardware, and was therefore removed again. Future commits which try to reintroduce this have to check carefully how hw behaves with aggregated and non-aggregated traffic for the same TID. My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12pinctrl: qcom: Add sc8180x TLMM driverBjorn Andersson
Add pinctrl driver for the sc8180x TLMM block. A noteworthy difference from previous TLMM blocks is that the registers for GPIO 177 through 189 are for some reason offset from the typical layout. Other than that the driver is same old... Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210126042650.1725176-3-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12dt-bindings: pinctrl: qcom: Add sc8180x bindingBjorn Andersson
Add binding for the TLMM block in the Qualcomm SC8180X platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210126042650.1725176-2-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12dt-bindings: pinctrl: qcom: Define common TLMM bindingBjorn Andersson
Several properties are shared between all TLMM bindings. By providing a common binding to define these properties each platform's binding can be reduced to just listing which of these properties should be checked for - or further specified. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210126042650.1725176-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 11:20:05 +0000